Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distribution factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Root Foraging Alters Global Patterns of Ecosystem Legacy From Climate Perturbations

The response of terrestrial ecosystems to climate perturbations typically persist longer than the timescale of the forcing, a phenomenon broadly referred to as legacy. Understanding the strength of legacy is critical for predicting ecosystem sensitivity to climate extremes and the extent that persistent changes in surface-atmosphere exchange might feedback onto climate. The cause of ecosystem legacy has been associated with myriad factors such as changes in aboveground biomass, however, few studies have tested how changes in the depth distribution of fine roots in response to perturbation might alter an ecosystem's recovery time. We explore this question using an Earth System Model that includes a dynamic root module where vegetation can forage for water and nutrients by altering their root profiles. The global simulations presented here show that in response to water stress events most ecosystems deepen their root profiles. In semi-arid ecosystems, this response expedites recovery (i.e., less legacy) relative to simulations without dynamics roots because access to deeper water pools after the initial event remains favorable. In wetter ecosystems, the development of deeper root profiles slows down the recovery timescale (i.e., more legacy) because the deeper root profile reduces access to nutrients and is thus unfavorable. Here, the simulations show that while the inclusion of dynamic roots might only minimally affect global patterns of Gross Primary Productivity and Evapotranspiration, the shift in root profile alters the timescale of recovery. Studies interested in the sustained response of land surfaces fluxes to climate disturbances should consider models that include dynamic root capability.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Quantitative measurements of density in shock-compressed silver up to 330 GPa using x-ray diffraction

This work presents a structural study of shock-compressed states in Ag to 331 GPa, accessed via laser shock compression. Structures of the resulting crystalline phases and the average atomic distribution of the liquid state are determined using in situ x-ray diffraction. We employ structure factor analysis, adapted for a non-monochromatic x-ray source, to determine the density of the liquid phase from analysis of x-ray diffraction data for the first time in shock compressed Ag. We also present a detailed analysis of the crystalline phases, which shows good agreement with the phase boundaries reported in previous experimental and theoretical works. We utilize the whole powder pattern fitting approach implemented in the MAUD package to constrain stacking faults in the face centered cubic structure. We observe the ambient fcc structure up to a stress of 146 GPa before a transition to a body-centered cubic structure and liquid phase at 179 GPa, with full melting above 212 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Double-sided electron energy analyzer for measurement of non-Maxwellian electron energy distributions

Here, a double-sided electron energy analyzer is developed for studies of magnetic reconnection. It can measure electron energy distribution functions along two directions opposite to each other at the same time. Each side is composed of a floating reference grid, an energy selector grid, and a collector plate. The voltage of the selector grid is swept from –40 to 0 V with respect to the reference grid with a frequency of 1 MHz. This fast sweeping is required to resolve sub-Alfvénic changes in plasma quantities of the Magnetic Reconnection Experiment, where the typical Alfvénic time is a few microseconds. The reliability of the energy analyzer is checked in Maxwellian plasmas away from the reconnection region. In this case, the electron temperature computed from the electron energy distribution function agrees with measurements of a reference triple Langmuir probe. When it is located near the reconnection region, the temperatures of the tail electron population from both sides, facing into the electron flow and facing away from it, exceed the bulk electron temperature measured by the Langmuir probe by a factor of about 2.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Molecular interactions in short-chain perfluoroalkyl carboxylic acids and aqueous solutions

The presence of short-chain per- and polyfluoroalkyl substances in water poses a major health and environmental challenge. Here, we have performed high-energy small- and wide-angle X-ray scattering measurements on CF 3 [CF 2 ] n COOH (where n = 1, 2, 3 represents the chain length) and their aqueous solutions at 10% mole concentrations to characterize their molecular interactions at the atomic and nanometer length scales. The experimental wide-angle structure factors have been modelled using Empirical Potential Structural Refinement. The oxygen–oxygen partial X-ray pair distribution functions show that the coordination number between the hydroxyl oxygen on the acid and surrounding oxygen water molecules increases significantly with acid chain length, rising from 3.2 for n = 1 to 4.1 for n = 3. The small-angle scattering is dominated by a sharp, high-intensity peak at Q 1 ~ 0.2 Å -1 and a smaller peak at Q 2 = 1.2 Å -1 for n = 3, both of which decrease with decreasing chain length. The Q 2 peak is attributed to groups of adjacent non-bonded acid molecules, and Q 1 has contributions from both correlations between acid molecules and water–water interactions. In all cases, the models show nanoscale aggregation occurs in the form of denser channels of winding hydrogen-bonded chains, approximately 20 water molecules in length, surrounding clusters of acid molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Integrating Viral Metagenomics into an Ecological Framework

Viral metagenomics has expanded our knowledge of the ecology of uncultured viruses, within both environmental (e.g., terrestrial and aquatic) and host-associated (e.g., plants and animals, including humans) contexts. Here, we emphasize the implementation of an ecological framework in viral metagenomic studies to address questions in virology rarely considered ecological, which can change our perception of viruses and how they interact with their surroundings. Additionally, an ecological framework explicitly considers diverse variants of viruses in populations that make up communities of interacting viruses, with ecosystem-level effects. It provides a structure for the study of the diversity, distributions, dynamics, and interactions of viruses with one another, hosts, and the ecosystem, including interactions with abiotic factors. An ecological framework in viral metagenomics stands poised to broadly expand our knowledge in basic and applied virology. We highlight specific fundamental research needs to capitalize on its potential and advance the field.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Review—Development of Highly Active and Durable Hybrid Compressive Platinum Lattice Catalysts for Polymer Electrolyte Membrane Fuel Cells: Mathematical Modeling and Experimental Work

This review provides a comprehensive overview on the development of highly active and durable platinum catalysts with ultra-low Pt loadings for polymer electrolyte membrane fuel cells (PEMFCs) through a combined mathematical modeling and experimental work. First, simulation techniques were applied to evaluate the validity of the Tafel approximation for the calculation of the mass activity (MA) and specific activity (SA). A one-dimensional agglomeration model was developed and solved to understand the effects of exchange current density, porosity, agglomerate size, Nafion ® film thickness, and Pt loading on the MA and SA. High porosity (> 60%) and agglomerations at high Pt loadings cause the loss of the Tafel approximation and consequently the decrease in MA and SA. A new structure parameter was introduced to estimate the real porous structure using the fractal theory. The volumetric catalyst density was corrected by the fractal dimension (measured by Hg porosimetry), which gave a good agreement with the experimental values. The loading-dependent Tafel equation was then derived, which contains both the utilization and the non-linear scaling factor. Second, activated carbon composite support (ACCS) with optimized surface area, porosity, pore size, and pore size distribution was developed. The hydrophilic/hydrophobic ratio, structural properties (amorphous/crystalline ratio), and the number of active sites were optimized through metal-catalyzed pyrolysis. Stability of ACCS and Pt/ACCS were evaluated using an accelerated stress test (AST). The results indicated that Pt/ACCS showed no significant loss of MA and power density after 5,000 cycles at 1.0–1.5 V, while the commercial Pt/C catalysts showed drastic losses of MA and power density. Finally, monolayers of compressed Pt (core–shell-type Pt 3 Co 1 ) catalysts were structured by diffusing Co atoms (previously embedded in ACCS) into Pt. Compressive Pt lattice (Pt * ) catalysts were synthesized through an annealing procedure developed at the University of South Carolina (USC). The Pt * /ACCS catalyst showed high initial power density (rated) of 0.174 g Pt kW −1 and high stability (24 mV loss) at 0.8 A cm −2 after 30,000 cycles (0.6–1.0 V). The outstanding performance of Pt * /ACCS is due to the synergistic effect of ACCS and compressive Pt * lattice.

25 ENERGY STORAGE↗
DOE OSTI2023

Resolving intragranular stress fields in plastically deformed titanium using point-focused high-energy diffraction microscopy

Abstract The response of a polycrystalline material to a mechanical load depends not only on the response of each individual grain, but also on the interaction with its neighbors. These interactions lead to local, intragranular stress concentrations that often dictate the initiation of plastic deformation and consequently the macroscopic stress–strain behavior. However, very few experimental studies have quantified intragranular stresses across bulk, three-dimensional volumes. In this work, a synchrotron X-ray diffraction technique called point-focused high-energy diffraction microscopy (pf-HEDM) is used to characterize intragranular deformation across a bulk, plastically deformed, polycrystalline titanium specimen. The results reveal the heterogenous stress distributions within individual grains and across grain boundaries, a stress concentration between a low and high Schmid factor grain pair, and a stress gradient near an extension twinning boundary. This work demonstrates the potential for the future use of pf-HEDM for understanding the local deformation associated with networks of grains and informing mesoscale models. Graphical abstract

36 MATERIALS SCIENCE↗
DOE OSTI2020

Model Development for Multi-Component Fuel Vaporization and Flash Boiling

The objectives of this project are to improve the multi-component fuel droplet and film vaporization models used in internal combustion engine simulation, and to develop a comprehensive model to predict the characteristics of multi-component flash boiling spray. This work explores two approaches to fuel composition treatment for modeling multi-component fuel vaporization: one based on discretization and surrogates, and the other based on continuous thermodynamic distribution of fuel properties. The experimental data collected for model validation are done under three fuel form factors: droplet, spray, and thin film. The study on sprays also include experimentation under non-flash and flash boiling conditions, a phenomenon that enhances fuel vaporization. The main goals of this work are: Design and develop a multi-component fuel droplet and wall film vaporization model using both discrete and continuous thermodynamics methods. Design and develop an analytical model for multi-component flash boiling. Integrate the multi-component droplet and film model into multi-dimensional engine calculations to predict the fuel vaporization process under engine operation condition. Conduct multi-component droplet and fuel film vaporization experiments in a non-combusting chamber to verify the proposed vaporization models. Characterize flash boiling phenomena of multi-component fuel sprays by optical and laser diagnostic techniques. This report will detail the experimental setup and the numerical basis for developing a model to achieve the main goals listed above. Key features of observed multi-component fuel vaporization will be summarized at the end of each experimental sections, and corresponding model performance evaluation will be presented at the end of each model development section.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

Intercomparison of Aerosol Instrumental Responses Using AEROTRAK, SMPS, and APS in a Simulated Building

In this work, three aerosol instruments were intercompared by using data collected from field campaigns in a simulated building environment during the last quarter of 2020 from October to December at Oak Ridge National Laboratory. The three aerosol instruments—AeroTrak Model 9110, Scanning Mobility Particle Spectrometer (SMPS) 3080L + 3025A, and Aerodynamic Particle Sizer (APS) 3320—were manufactured by TSI Inc. to perform in situ measurements of particle number concentration in the air. These instruments were co-located in one room in which an aerosol generator was used to produce a defined aerosol population for the instruments to sample and detect in each campaign. The SMPS measured aerosol particles with diameters from 0.01 to 0.7 µm, APS measured aerosol particles with diameters from 0.5 to 20 µm, and AeroTrak measured aerosol particles with diameters from 0.1 to 10 µm. The results suggest that although AeroTrak is fast and easy to use, it does not provide measurements comparable with those obtained by SMPS and APS. The differences in particle counts were orders of magnitude in size (i.e., the AeroTrak data were unreasonably small in the tested scenarios). The results clearly indicate that AeroTrak should not be used in ambient applications in which the level of particle concentration is expected to be high. This would cause difficulty to a campaign in which the dilution factor is unknow a priori. The high particle concentration could also lead to an erroneous aerosol size distribution (e.g., a bimodal size distribution was measured as opposed to a single-mode one). The number concentration limit that AeroTrak is expected to run reliably (i.e., with a counting coincidence error less than ±10%) is approximately three to four per cubic centimeter. This suggests that the instrument is best used in a clean room environment, not in an ambient or indoor application, such as the Flexible Research Platform campaigns.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

A Framework for Identifying Building Energy Models of Localized Utility Service Areas Using Smart Meter Data

Bottom-up load modeling of buildings offers a versatile approach to simulating baseline demand and scenarios of future technology evolution and adoption at the individual building level. This capability is essential to understanding how future load shapes may change with the adoption of electric equipment and vehicles, particularly as it relates to grid planning and infrastructure investments. Traditionally, grid planning techniques have used historical load data to predict future load and infrastructure needs. However, with the anticipated rise in adoption of electrification technologies such as heat pumps and electric vehicles, historical data become less reliable predictors of the future. By employing ResStock, a high-fidelity building stock modeling tool, we can fine-tune electrification scenarios and aggregate models to represent varying geographic resolutions of the grid system, while considering the underlying features of homes. This may enable a more accurate and responsive approach to anticipate and plan for the evolving landscape of energy demands. We present a new framework that leverages building stock energy modeling to identify building models that align with the load shapes and housing attributes of buildings with AMI data. This approach applies two model layers: (1) a classification step that identifies the presence of air conditioning, electric heating, and electric water heating, and (2) an optimization routine that identifies building energy models aligning with load profile data from advanced metering infrastructure meters. This report demonstrates one approach to deploying this framework, and presents results for three test cases that use both modeled and AMI data to assess performance. For a test case using AMI data in Fort Collins, Colorado, we observed a median monthly electricity load CV-RMSE of 16.6%, and a top ten daily heating and cooling median absolute percent error of 7.7% and 8.3%, respectively. For each AMI meter, we identify a set of potential energy models so that downstream use-cases can account for uncertainty driven by variability of baseline technologies and occupant behavior, which impact the response to electrification and energy efficiency scenarios. Our results indicate that ResStock has potential as a scalable solution for modeling residential energy demand at local grid resolutions. Its performance depends on location-specific factors, underlying building characteristics, and the level of aggregation, offering a path towards more precise and adaptive distribution grid planning for the evolving energy landscape.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Effect of Composition on the Phase Structure and Magnetic Properties of Ball-Milled LaFe11.71-xMnxSi1.29H1.6 Magnetocaloric Powders

Magnetocaloric alloys are an important class of materials that enable non-vapor compression cycles. One promising candidate for magnetocaloric systems is LaFeMnSi, thanks to a combination of factors including low-cost constituents and a useful curie temperature, although control of the constituents’ phase distribution can be challenging. In this paper, the effects of composition and high energy ball milling on the particle morphology and phase stability of LaFe11.71-xMnxSi1.29H1.6 magnetocaloric powders were investigated. The powders were characterized with optical microscopy, dynamic light scattering, X-ray diffraction (XRD), and differential scanning calorimetry (DSC). It was found that the powders retained most of their original magnetocaloric phase during milling, although milling reduced the degree of crystallinity in the powder. Furthermore, some oxide phases (<1 weight percent) were present in the as-received and milled powders, which indicates that no significant contamination of the powders occurred during milling. Finally, the results indicated that the Curie temperature drops as Fe content decreases (Mn content increases). In all of the powders, milling led to an increase in the Curie temperature of ~3–6 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Illuminating Galaxy Evolution at Cosmic Noon with ISCEA: the Infrared Satellite for Cosmic Evolution Astrophysics

ISCEA (Infrared Satellite for Cosmic Evolution Astrophysics) is a small astrophysics mission whose Science Goal is to discover how galaxies evolved in the cosmic web of dark matter at cosmic noon. Its Science Objective is to determine the history of star formation and its quenching in galaxies as a function of local density and stellar mass when the Universe was 3-5 Gyrs old (1.2 10 Mpc in each of 50 protocluster (cluster and cosmic web) fields at 1.2 < z < 2.1. ISCEA measures the star formation quenching factor in those fields, and galaxy kinematics with a precision < 50 km/s to deduce the 3D spatial distribution in each field. ISCEA will transform our understanding of galaxy evolution at cosmic noon. ISCEA is a small satellite observatory with a 30cm equivalent diameter aperture telescope with a FoV of 0.32 deg^2, and a multi-object spectrograph with a digital micro-mirror device (DMD) as its programmable slit mask. ISCEA will obtain spectra of 1000 galaxies simultaneously at an effective resolving power of R=1000, with 2.8"x2.8" slits, over the NIR wavelength range of 1.1 to 2.0 microns, a regime not accessible from the ground without large gaps in coverage. ISCEA will achieve a pointing accuracy of <= 2" FWHM over 200s. ISCEA will be launched into a Low Earth Orbit, with a prime mission of 2.5 years. ISCEA's space-qualification of DMDs opens a new window for spectroscopy from space, enabling revolutionary advances in astrophysics.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Effect of Humidity on Charge Decay in Varying Atmospheric Gases

Characterization of surface charge decay for varying materials – PTFE, Acrylic, and metals – of 100 mm diameter, radially symmetric bodies was performed. In a gaseous environment, charged materials will lose their charge depending on gas type, humidity, and other environmental factors. Eventually, the charge will be (1) neutralized by ions or electrons in the surrounding gas (2) distributed by conduction on the material surface or in its volume (3) or neutralized by ions or electrons in the material surface and volume. Metal and polymer samples are charged to a known potential in the tens of kilovolts range, and the decaying voltage is monitored with a non-contact probe until the potential reaches near zero. Humidity has an impact on both groups of materials. As a baseline, in air at 42% relative humidity in an enclosed chamber, a positive charge equivalent to 20 kV potential on a metal sphere of 50 mm radius decays to near zero within 25 minutes. In contrast, the same sphere negatively charged decays slightly faster within 20 minutes. Overall, the humidity has a significant effect on the charge decay time, such that an order of magnitude longer times (hours) are observed at low humidity. Effects of chamber size were also studied, drawing a connection to charge carriers in the air available for decay, with chambers of volume(s): 3.3 105 cm3 and 1.4 106 cm3, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Securing Future Energy Supplies: From Renewables to Microreactors

This session will provide insight into how future energy deployments, critical to national-level programs focused on reducing carbon emissions, can be secured-by-design using lessons learned from current energy infrastructure. It will begin with an overview of current threats and risks associated with renewable energy assets and systems, primarily wind and solar, focusing on their control architecture and key system functions for both efficient and safe operations. This talk will then translate the key takeaways from current renewable infrastructure into applications for securing future energy systems, including microreactors and small modular reactors (SMRs), based on planned concepts of operations and control. Microreactors and SMRs are intended to be factory-assembled with commercially available components and deployed in more remote or distributed environments, necessitating centralized control centers, remote monitoring, and offsite maintenance and technical support. All of these factors lead these assets to a security posture and controls more similar to today's renewable energy assets than today's nuclear reactors, which represents a significant shift in mindset for the nuclear industry. This talk will provide justification for this shift as well as a path forward to motivate securing these groundbreaking technologies from the outset of their design and deployment.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Role of underlying surface, rainstorm and antecedent wetness condition on flood responses in small and medium sized watersheds in the Yangtze River Delta region, China

Floods are becoming more frequent and are hard to control due to the shortage of water conservancy projects in small and medium sized basins, especially in developing regions. Understanding the hydrologic responses and estimated flood characteristics to storm events can help to predict flood disasters and form better effective mitigation and adaptation strategies. Here, using observations of several representative watersheds and Artificial Neural Networks (ANN) and Principal Component Regression (PCR) models, we conducted data-driven analyses to examine the flood responding characteristics. We quantified the relative contributions of the influencing factors to the variation of each flood characteristic. Statistical analysis of the observations shows that the drainage area plays a key role in determining the distribution of lag time and peak discharge. Rainstorm variability has direct influence on floods, and typhoon-induced rainstorms with high total rainfall and rainfall intensity generate higher lag time, flood peak, unit discharge and runoff depth, but lower runoff coefficient. The ANN and PCR models accurately predicted the variations of flood features using the driving factors including physical geographical characteristics, rainstorm features, and antecedent condition. Physical geographic characteristics are key influential factors of lag time, flood peak and runoff coefficient, while the rainstorm features control the magnitude of unit discharge and runoff depth. These results indicate that floods are mainly affected by rainstorm features and physical geographic characteristics in the Yangtze River delta, and it might become more damaging with the increasing rainfall extremes and sprawling impervious surfaces in a changing environment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Soft fragmentation on the celestial sphere

We develop two approaches to the problem of soft fragmentation of hadrons in a gauge theory for high energy processes. The first approach directly adapts the standard resummation of the parton distribution function’s anomalous dimension (that of twist-two local operators) in the forward scattering regime, using k T -factorization and BFKL theory, to the case of the fragmentation function by exploiting the mapping between the dynamics of eikonal lines on transverse-plane to the celestial-sphere. Critically, to correctly resum the anomalous dimension of the fragmentation function under this mapping, one must pay careful attention to the role of regularization, despite the manifest collinear or infra- red finiteness of the BFKL equation. The anomalous dependence on energy in the celestial case, arising due to the mismatch of dimensionality between positions and angles, drives the differences between the space-like and time-like anomalous dimension of parton densities, even in a conformal theory. The second approach adapts an angular-ordered evolution equation, but working in 4 – 2ϵ dimensions at all angles. The two approaches are united by demanding that the anomalous dimension in 4 – 2ϵ dimensions for the parton distribution function determines the kernel for the angular-ordered evolution to all orders.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Climate-Related Trends of Within-Storm Intensities Using Dimensionless Temporal-Storm Distributions

Huff curves are probabilistic time distributions of rainfall expressed as dimensionless cumulative percentages of storm depth and duration. Previous studies have documented development factors, spatial robustness, and the utility of Huff curves in practical applications. However, the effects of trending rainfall on Huff curve intensity patterns have not yet been studied. As such, the goal of this paper is to fill this gap by studying Huff curve patterns in a watershed with demonstrated increasing trends of temperature and precipitation, with the intention that it can be generalized to other areas in the US and the world. To achieve this goal, the high temporal resolution precipitation data collected from a high spatial density, 72-year precipitation-gauge network on the 4.25-km 2 North Appalachian Experimental Watershed in east-central Ohio were used. Seasonal storm pattern trends from 1939 to 2010 were investigated using dimensionless depth (with the frequency of 50%, $d_{50}$) and the curve variability $(V = d_{80} - d_{20})$ at three dimensionless within-storms time periods (three verticals). The Spearman rank correlation procedure (correlation coefficient, ρ and significance probability, p) was used to statistically determine trends over time using 8 periods of 4-season sets of Huff curves over the 72 years. Two averages of ρ and p were computed: (1) by averaging the individual ρ and p obtained from 10 gauges (AvgI); and (2) by grouped averaging of all individual gauge values of $d_{50}$ and V and then computing ρ and p (AvgG). The test results of individual gauges showed that 4 cases for $d_{50}$ and 23 cases for V were significant for all seasons and verticals (total of 120 cases for each variable). The test results of AvgI for $d_{50}$ and V and AvgG for $d_{50}$ showed no significant trends in all seasons and verticals. Only the AvgG for V led to a significant trend for V in spring and fall at different times within storm patterns. The data do not provide sufficient evidence at the p=0.05 significance level to reject the null hypothesis of unchanging position of the dimensionless depth of the 50% Huff curves for individual or averages for all seasons and verticals. Also, there is insufficient evidence to reject the null hypothesis of unchanging variability, V, using the average ρ of individual gauges (AvgI for V) for all seasons and verticals. AvgG results showed a significant trend in V; however, this analysis may be affected by the nonindependence of storm data. The results suggest that it is likely that there is little if any effect of trending climate over approximately 70 years on Huff curve patterns. The results of this study add to the robustness characteristics of Huff curves and to their potential use in hydrological practice as design storms, as the foundation of stochastic storm generation, and for storm disaggregation, and they deserve further investigation. These different forms of inputs to watershed models have the potential to improve runoff estimation. The results suggest that, if verified in other studies, they have applicability to provide useful stationary precipitation patterns across the US and other areas of the world in areas of nonstationary climate. Also, individual rain gauge data may not be representative of trends even over small areas, and seasonal differences were noticeable as found in other studies. Recommendations are provided.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Weak-charge form-factor determination at the electron-ion collider

Determining the weak charge form factor, 𝐹 𝑊 ⁡(𝑄 2 ), of nuclei over a continuous range of momentum transfers, 0 ≲ 𝑄 2 ≲ 0.1 GeV 2 , is essential for mapping out the distribution of neutrons in nuclei. The neutron density distribution has significant implications for a broad range of areas, including studies of nuclear structure, neutron stars, and physics beyond the Standard Model. Currently, our knowledge of 𝐹 𝑊 ⁡(𝑄 2 ) comes primarily from fixed target experiments that measure the parity-violating asymmetry in coherent elastic electron-ion scattering. Fixed target experiments, such as CREX and PREX-1,2, have provided high-precision weak charge form factor extractions for the 48 Ca and 208 Pb nuclei, respectively. However, a major limitation of fixed target experiments is that they each provide data only at a single value of 𝑄 2 . With the proposed electron-ion collider (EIC) on the horizon, we explore its potential to impact the determination of the weak charge form factor. While it cannot compete with the precision of fixed target experiments, it can provide data over a wide and continuous range of 𝑄 2 values, and for a wide variety of nuclei. We show that with data corresponding to an integrated luminosity of ℒ ∼ 500/𝐴 fb −1 , where 𝐴 is the nucleus atomic weight, the EIC can significantly impact constraints by lifting degeneracies in theoretical models of the neutron density distribution. Ensuring EIC detector coverage at low 𝑄 2 and large negative pseudorapidities will be essential for such 𝐹 𝑊 ⁡(𝑄 2 ) measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗