Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diamond”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Imaging crystal stress in diamond using ensembles of nitrogen-vacancy centers

We present a micrometer-resolution and millimeter-field-of-view stress imaging method for diamonds containing a thin surface layer of nitrogen vacancy (NV) color centers. In this method, we reconstruct stress tensor elements over a two-dimensional field of view from NV optically-detected magnetic resonance (ODMR) spectra. We use this technique to study how stress inhomogeneity affects NV magnetometry performance, and show how NV stress imaging is a useful and direct way to assess these effects. This new tool for mapping stress in diamond will aid optimization of NV-diamond sensing, with wide-ranging applications in the physical and life sciences.

36 MATERIALS SCIENCE↗

Diamond at 800 GPa

A new compression technique, which enables the study of solids into the TPa regime, is described and used to ramp (or quasi-isentropically) compress diamond to a peak pressure of 1400 GPa. Diamond stress versus density data are reported to 800 GPa and suggest that the diamond phase is stable and has significant material strength up to at least this stress level. Data presented here are the highest ramp compression pressures by more than a factor of 5 and the highest-pressure solid equation-of-state data ever reported.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pulse-resolved intensity measurements at a hard X-ray FEL using semi-transparent diamond detectors

Solid-state ionization chambers are presented based on thin diamond crystals that allow pulse-resolved intensity measurements at a hard X-ray free-electron laser (FEL), up to the 4.5 MHz repetition rate that will become available at the European XFEL. Due to the small X-ray absorption of diamond the thin detectors are semi-transparent which eases their use as non-invasive monitoring devices in the beam. FELs are characterized by strong pulse-to-pulse intensity fluctuations due to the self-amplified spontaneous emission (SASE) process and in many experiments it is mandatory to monitor the intensity of each individual pulse. Two diamond detectors with different electrode materials, beryllium and graphite, were tested as intensity monitors at the XCS endstation of the Linac Coherent Light Source (LCLS) using the pink SASE beam at 9 keV. The performance is compared with LCLS standard monitors that detect X-rays backscattered from thin SiN foils placed in the beam. In conclusion, the graphite detector can also be used as a beam position monitor although with rather coarse resolution.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Test of a prototype neutron spectrometer based on diamond detectors in a fast reactor

A prototype of neutron spectrometer based on diamond detectors has been developed. This prototype consists of a {sup 6}Li neutron converter sandwiched between two CVD diamond crystals. The radiation hardness of the diamond crystals makes it suitable for applications in low power research reactors, while a low sensitivity to gamma rays and low leakage current of the detector permit to reach good energy resolution. A fast coincidence between two crystals is used to reject background. The detector was read out using two different electronic chains connected to it by a few meters of cable. The first chain was based on conventional charge-sensitive amplifiers, the other used a custom fast charge amplifier developed for this purpose. The prototype has been tested at various neutron sources and showed its practicability. In particular, the detector was calibrated in a TRIGA thermal reactor (LENA laboratory, University of Pavia) with neutron fluxes of 10{sup 8} n/cm{sup 2}s and at the 3 MeV D-D monochromatic neutron source named FNG (ENEA, Rome) with neutron fluxes of 10{sup 6} n/cm{sup 2}s. The neutron spectrum measurement was performed at the TAPIRO fast research reactor (ENEA, Casaccia) with fluxes of 10{sup 9} n/cm{sup 2}s. The obtained spectra were compared to Monte Carlo simulations, modeling detector response with MCNP and Geant4. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

High Current Density Diamond Photoconductive Semiconductor Switches With a Buried, Metallic Conductive Channel

Laterally configured diamond photoconductive semiconductor switches (PCSS) with a buried, metallic p+ current channel are reported. Above bandgap ( λ ≤ 226 nm) optical triggering enables responsivity of over 130 mA/W. The use of low-impurity semi-insulating diamond as an active absorption layer enables fast rise and fall times (~2 ns) and on/off ratios greater than 10 11 . The PCSS excited with a laser energy of 20 nJ per pulse passes a high current density (44 A/cm) under a DC bias of 60 V, thanks to the buried metallic p+ current channel. The reported devices promise high current carrying capacity without the need for filamenting while leveraging the excellent optical, electronic, and thermal properties of diamond.

42 ENGINEERING↗

Analyses of Diamond Wire Sawn Wafers: Effect of Various Cutting Parameters

We have evaluated surface characteristics of diamond wire cut (DWC) wafers sawn under a variety of cutting parameters. These characteristics include surface roughness, spatial frequencies of surface profiles, phase changes, damage depth, and lateral non-uniformities in the surface damage. Various cutting parameters investigated are: wire size, diamond grit size, reciprocating frequency, feed rate, and wire usage. Spatial frequency components of surface topography/roughness are influenced by individual cutting parameters as manifested by distinct peaks in the Fourier transforms of the Dektak profiles. The depth of damage is strongly controlled by diamond grit size and wire usage and to a smaller degree by the wire size.

14 SOLAR ENERGY↗

Effect of oxygen on growth and properties of diamond thin film deposited at low surface temperature

Polycrystalline diamond thin films are grown on a p-type Si (100) single crystal substrate at a low surface deposition temperature of 455 deg. C using a microwave plasma enhanced chemical vapor deposition process in an Ar-rich Ar/H{sub 2}/CH{sub 4} plasma containing different oxygen levels from 0% to 0.75%. The surface deposition temperatures are measured and monitored by an IR thermometer capable of working in a plasma environment without any interference from the plasma emissions. The lower surface deposition temperature at high microwave power of 1300 W and higher gas pressure of 95 torr is achieved by active cooling of the substrate from the backside using a specially designed cooling stage. An enhanced growth rate from 0.19 to 0.63 {mu}m/h is observed with varying oxygen from 0% to 0.75% in the plasma. Diamond grain size also increased from 0.69 {mu}m for the sample with no oxygen to 1.74 {mu}m for the sample with 0.75% oxygen. The diamond films are characterized using x-ray diffraction, environmental scanning electron microscopy field emission gun, Raman spectroscopy, and x-ray photoelectron spectroscopy. The enhanced growth rate is correlated with the enhanced atomic hydrogen to C{sub 2} ratio with increasing oxygen concentration in the plasma, which is measured by an in situ optical emission spectroscopy.

36 MATERIALS SCIENCE↗

SU-F-T-178: Optimized Design of a Diamond Detector Specifically Dedicated to the Dose Distribution Measurements in Clinical Proton Pencil Beams

Purpose: In proton-therapy, pencil beam scanning (PBS) dosimetry presents a real challenge due to the small size of the beam (about 3 to 8 mm in FWHM), the pulsed high dose rate (up to 100 Gy/s) and the proton energy variation (about 30 MeV to 250 MeV). In the framework of French INSERM DEDIPRO project, a specifically dedicated single crystal diamond dosimeter (SCDDo) was developed with the objective of obtaining accurate measurements of the dose distribution in PBS modality. Methods: Monte Carlo simulations with MCNPX were performed. A small proton beam of 5 mm in FWHM was simulated as well as diamond devices with various size, thickness and holder composition. The calculated doses-to-diamond were compared with the doses-to-water in order to reduce the perturbation effects. Monte-Carlo simulations lead to an optimized SCDDo design for small proton beams dosimetry. Following the optimized design, SCDDos were mounted in water-equivalent holders with electrical connection adapted to standard electrometer. First, SCDDos performances (stability, repeatability, signal-to-background ratio…) were evaluated with conventional photon beams. Then, characterizations (dose linearity, dose rate dependence…) with wide proton beams were performed at proton-therapy center (IC-CPO) from Curie Institute (France) with the passive proton delivery technique, in order to confirm dosimetric requirements. Finally, depth-dose distributions were measured in a water tank, for native and modulated Bragg Peaks with the collimator of 12 cm, and compared to a commercial PPC05 parallel-plate ionization chamber reference detector. Lateral-dose profiles were also measured with the collimator of 5 mm, and compared to a commercial SFD diode. Results: The results show that SCDDo design does not disturb the dose distributions. Conclusion: The experimental dose distributions with the SCDDo are in good agreement with the commercial detectors and no energy dependence was observed with this device configuration.

07 ISOTOPE AND RADIATION SOURCES↗

Calculation of the Physicochemical Characteristics of a New Orthorhombic Form of Diamond

A geometrically optimized structure and some properties of a new diamond polymorph have been assessed using density-functional theory calculations in the local-density approximation. The new phase has a primitive orthorhombic lattice (Pmma). The calculation results indicate that the density, sublimation energy, bulk modulus, Vickers hardness, and band gap of this phase are lower than those of cubic diamond by 5–18%. The orthorhombic diamond polymorph can be obtained by compressing graphite in the [001] direction at a pressure of 59.4 GPa. For this phase transition, we calculated theoretical X-ray diffraction patterns of the new phase and intermediate states, which can be used for their identification in experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of bound hydrogen in powders of diamond nanoparticles

In order to access feasibility of increasing albedo of very cold neutrons from powder of diamond nanoparticles, we studied hydrogen bound to surface of diamond nanoparticles, which causes unwanted losses of neutrons. We showed that one could decrease a fraction of hydrogen atoms from a ratio C{sub 7.4{+-}0.15}H to a ratio C{sub 12.4{+-}0.2}H by means of thermal treatment and outgasing of powder. Measurements of atomic excitation spectra of these samples, using a method of inelastic incoherent neutron scattering, indicate that residual hydrogen is chemically bound to carbon, while a removed fraction was composed of adsorbed water. The total cross section of scattering of neutrons with a wavelength of 4.4 Angstrom-Sign on residual hydrogen atoms equals 108 {+-} 2 b; it weakly changes with temperature. Thus preliminary cleaning of powder from hydrogen and its moderate cooling do not improve considerably neutron albedo from powder of nano-diamonds. An alternative approach is isotopic replacement of hydrogen by deuterium.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

X-ray diffraction characterization of epitaxial CVD diamond films with natural and isotopically modified compositions

Comparative investigations of homoepitaxial diamond films with natural and modified isotopic compositions, grown by chemical vapor deposition (CVD) on type-Ib diamond substrates, are carried out using double-crystal X-ray diffractometry and topography. The lattice mismatch between the substrate and film is precisely measured. A decrease in the lattice constant on the order of (Δa/a){sub relax} ∼ (1.1–1.2) × 10{sup –4} is recorded in isotopically modified {sup 13}C (99.96%) films. The critical thicknesses of pseudomorphic diamond films is calculated. A significant increase in the dislocation density due to the elastic stress relaxation is revealed by X-ray topography.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal conductivity of polycrystalline CVD diamond: Experiment and theory

The temperature dependences of thermal conductivity {kappa} of polycrystalline CVD diamond are measured in the temperature range from 5 to 410 K. The diamond sample is annealed at temperatures sequentially increasing from 1550 to 1690{sup o}C to modify the properties of the intercrystallite contacts in it. As a result of annealing, the thermal conductivity decreases strongly at temperatures below 45 K, and its temperature dependence changes from approximately quadratic to cubic. At T > 45 K, the thermal conductivity remains almost unchanged upon annealing at temperatures up to 1650{sup o}C and decreases substantially at higher annealing temperatures. The experimental data are analyzed in terms of the Callaway theory of thermal conductivity [9], which takes into account the specific role of normal phonon-phonon scattering processes. The thermal conductivity is calculated with allowance for three-phonon scattering processes, the diffuse scattering by sample boundaries, the scattering by point and extended defects, the specular scattering by crystallite boundaries, and the scattering by intercrystallite contacts. A model that reproduces the main specific features of the thermal conductivity of CVD diamond is proposed. The phonon scattering by intercrystallite contacts plays a key role in this model.

36 MATERIALS SCIENCE↗

Dynamics of charge carriers at the place of the formation of a muonic atom in diamond and silicon

The space-time distribution of charge carriers at the place of the location of a muonic atom formed when a negative muon is captured by an atom of the lattice has been numerically simulated taking into account the self-consistent electric field. The results of {mu}SR experiments with negative muons in diamond crystals have been explained and reasons for the difference in the behavior of the spin polarization of the negative muon in boron-doped diamond and in silicon have been revealed. The condition of the validity of the analytical solution of this problem has been obtained. It has been shown that the muonic atom in diamond, in contrast to silicon, does not form a neutral acceptor center in the paramagnetic state during the muon experiment and remains in the diamagnetic state of a positive ion.

74 ATOMIC AND MOLECULAR PHYSICS↗

Photoluminescence of silicon after deposition of polycrystalline diamond films

Low-temperature (5K) photoluminescence of silicon substrates in the range 0.8-1.2 eV is studied before and after deposition of polycrystalline diamond films. The diamond films were deposited in the microwave plasma onto high-purity dislocation-free silicon (with the resitivity {rho} {approx} 3 k{Omega} cm) subjected to mechanical polishing or more delicate chemical and mechanical polishing. The deposition temperature was 750-850 deg. C. In the photoluminescence spectra of the samples with the substrates polished chemically and mechanically, two lines, D{sub 1} and D{sub 2}, corresponding to the dislocation-related emission are recorded. Generation of dislocations in the substrates is caused by efficient adhesion of the diamond film and, as a result, by internal stresses that relax with the formation of dislocations. The experimental spectra are practically identical to the photoluminescence spectra observed in silicon ({rho} {approx} 100 {Omega} cm) with the density of dislocations {approx}10{sup 4} cm{sup -2}.

36 MATERIALS SCIENCE↗

Study of the Structural and Morphological Properties of HPHT Diamond Substrates

The morphological and structural properties of a series of high-pressure high-temperature (HPHT) single-crystal diamond substrates are comprehensively studied by white-light optical interference microscopy, atomic-force microscopy, and X-ray diffraction analysis. Procedures that provide a means for characterizing the substrate parameters most critical for epitaxial application with the laboratory equipment are described. It is shown that the jewelry-type characterization of diamond substrates is insufficient to assess the possibility of their use for the epitaxial growth of chemical-vapor-deposited (CVD) diamond.

36 MATERIALS SCIENCE↗

Evolution of Triplet Paramagnetic Centers in Diamonds Obtained by Sintering of Detonation Nanodiamonds at High Pressure and Temperature

The electron paramagnetic resonance (EPR) spectra of triplet centers in detonation nanodiamonds (DNDs) and diamond single crystals of submicrometer size, synthesized from those DNDs at high pressures and temperatures, are studied. In the EPR spectra of DNDs, signals from negatively charged nitrogen- vacancy centers (NV)/sup(-) with a g factor of g{sub 1} = 4.24 and multivacancies with g{sub 2} = 4.00 are observed. The signals from (NV)/sup(-) centers disappear in the spectra of diamond single crystals, and a quintet signal with g = 4.00 is detected at the position of the signal from multivacancies. Analysis of the shape and position of the quintet’ lines showed that this ESR signal is due to the pairs of nitrogen substitution centers in diamond, separated from each other by distances not exceeding 0.7 nm, between which a strong exchange interaction takes place. A comparison of the experimental data and the simulation results allows determining the spin-Hamiltonian parameters of the exchange-coupled pairs of paramagnetic impurity nitrogen atoms.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ion Modification of the Field-Emission Properties of Diamond-Graphite Film Structures

The patterns of variation of structure-phase, morphological, and field-emission parameters of nanocomposite diamond-graphite film structures, which were synthesized in microwave plasma of ethanol vapors, with the dose of irradiation with nitrogen ions with an energy of 20 keV are studied. It is found that the morphological parameters of diamond-graphite structures subjected to small-dose irradiation differ only slightly from those of nonirradiated samples. In contrast, the field-emission properties of irradiated samples are altered significantly. The maximum density of field-emission currents increases when the field-emission excitation thresholds are raised. The optimum doses of nitrogen ion implantation resulting in a more than fivefold increase (relative to nonirradiated structures) in the maximum density of field-emission currents are determined. The physical and chemical mechanisms involved in the modification of surface and near-surface properties of diamond-graphite structures subjected to various doses of ion irradiation are examined.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Influence of Cobalt on the Adhesion Strength of Polycrystalline Diamond Coatings on WC–Co Hard Alloys

The influence of cobalt on the phase composition and adhesion strength of polycrystalline diamond coatings has been studied using scanning electron microscopy, Raman spectroscopy, and X-ray microanalysis. The coatings have been deposited on WC–Co hard alloy substrates in glow discharge plasma. It has been found that the catalytic amorphization of carbon only takes place during the direct synthesis of the diamond coating, when the cobalt vapor pressure over the substrate is high and the cobalt-related degradation of the synthesized diamond is absent.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗