Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “delivery”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

3D Printing of Aqueous Two-Phase Systems with Linear and Bottlebrush Polyelectrolytes

In this study, we formed core–shell-like polyelectrolyte complexes (PECs) from an anionic bottlebrush polymer with poly (acrylic acid) side chains with a cationic linear poly (allylamine hydrochloride). By varying the pH, the number of side chains of the polyanionic BB polymers (Nbb), the charge density of the polyelectrolytes, and the salt concentration, the phase separation behavior and salt resistance of the complexes could be tuned by the conformation of the BBs. By combining the linear/bottlebrush polyelectrolyte complexation with all-liquid 3D printing, flow-through tubular constructs were produced that showed selective transport across the PEC membrane comprising the walls of the tubules. These tubular constructs afford a new platform for flow-through delivery systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

3D‐Printed Carbon Nanoneedle Electrodes for Dopamine Detection in Drosophila

In vivo electrochemistry in small brain regions or synapses requires nanoelectrodes with long straight tips for submicron scale measurements. Nanoelectrodes can be fabricated using a Nanoscribe two-photon printer, but annealed tips curl if they are long and thin. We propose a new pulling-force strategy to fabricate a straight carbon nanoneedle structure. A micron-width bridge is printed between two blocks. The annealed structure shrinks during pyrolysis, and the blocks create a pulling force to form a long, thin, and straight carbon bridge. Parameterization study and COMSOL modeling indicate changes in the block size, bridge size and length affect the pulling force and bridge shrinkage. Electrodes were printed on niobium wires, insulated with aluminum oxide, and the bridge cut with focused ion beam (FIB) to expose the nanoneedle tip. Annealed needle diameters ranged from 400 nm to 5.25 μm and length varied from 50.5 μm to 146 μm. The electrochemical properties are similar to glassy carbon, with good performance for dopamine detection with fast-scan cyclic voltammetry. Nanoelectrodes enable biological applications, such as dopamine detection in a specific Drosophila brain region. Long and thin nanoneedles are generally useful for other applications such as cellular sensing, drug delivery, or gas sensing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparative Study of Solvatomorphs of Stryker's Reagent Using MicroED and Quantum Mechanics

Abstract The atomic position of hydrogen atoms in metal hydrides has been a long‐standing structural question in inorganic chemistry given that hydride delivery is integral to diverse chemical reactions. Microcrystal electron diffraction (microED), with it's increased sensitivity toward hydrogen atoms relative to X‐ray diffraction, offers a potential path to addressing this challenge. Herein, the first microED study of Stryker's reagent is reported, resulting in the structure of a new benzene solvate. Improved accuracy for hydrogen atom positions was obtained via a quantum crystallography (QCr) approach, Hirshfeld atom refinement (HAR). Structural and topological analysis supports edge bridging hydrides in the microED structure of a THF solvate form, consistent with previous diffraction studies. Interestingly, analysis of a new benzene solvate, discovered in this study, is consistent with mixed edge‐ and face‐bridging hydrides.

Jha, Kunal K. [Division of Chemistry &amp, Chemica↗

Cu‐Catalyzed Aerobic Oxidative C─C Cleavage in Lignin‐Derived Oligomers and Biological Funneling of the Monomeric Products

Existing methods for lignin deconstruction to aromatic monomers primarily cleave carbon–oxygen bonds within the polymer, resulting in sub-optimal monomer yields and formation of oligomers that retain intact carbon–carbon bonds. Here, we demonstrate that copper-catalyzed aerobic oxidation under aqueous alkaline conditions promotes oxidative cleavage of carbon–carbon bonds in lignin oligomers derived from reductive catalytic fractionation (RCF) of pine and poplar biomass. Fundamental insights are gained from reactions of model compounds that resemble subunits present in RCF oligomers. Optimal results are achieved in a flow reactor that provides precise control over O2 delivery, temperature, and reaction residence time. The Cu-catalyzed aerobic oxidation conditions access aromatic monomers in 19 and 34 wt% monomer yields, respectively, from pine- and poplar-derived RCF oligomers. Overall, the sequence consisting of biomass RCF into monomers and oligomers followed by oxidative deconstruction of the RCF oligomers generates substantially higher yields of aromatic monomers from lignin. Engineered strains of Pseudomonas putida support biological funneling of the oligomer-derived oxygenated aromatic compounds into cis,cis-muconic acid from pine or 2-pyrone-4,6-dicarboxylic acid from poplar.

09 BIOMASS FUELS↗

Self‐assembling Peptides with Internal Ionizable Unnatural Amino Acids: A General Approach to pH‐responsive Peptide Materials

Self‐assembled peptides are an emerging family of biomaterials that show great promise for a range of biomedical and biotechnological applications. Introducing and tuning the pH‐responsiveness of the assembly is highly desirable for improving their biological activities. Inspired by proteins with internal ionizable residues, we report a simple but effective approach to constructing pH‐responsive peptide assembly containing unnatural ionic amino acids with an aliphatic tertiary amine side chain. Through a combined experimental and computational investigation, we demonstrate that these residues can be accommodated and stabilized within the internal hydrophobic compartment of the peptide assembly. The hydrophobic microenvironment shifts their pK a significantly from a basic pH typically found for free amines to a more biologically relevant pH in the weakly acidic range. The pH‐induced ionization and ionization‐dependent self‐assembly and disassembly are thoroughly investigated and correlated with the biological activity of the assembly. This new approach has unique advantages in tuning the pH‐responsiveness of self‐assembled peptides across a large pH range in a complex biological environment. We anticipate the ionizable amino acids developed here can be widely applicable to the synthesis and self‐assembly of many amphiphilic peptides with endowed pH‐responsive properties to enhance their biological activities toward applications ranging from targeted therapeutic delivery to proton transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hierarchical assemblies of polypeptoids for rational design of advanced functional nanomaterials

Polypeptoids (poly-N-substituent glycines) are a class of highly tailorable peptidomimetic polymers. Polypeptoids have identical backbones as polypeptides (poly-C-substituent glycines), but sidechains of polypeptoids are appended to backbone nitrogen rather than α-carbon of polypeptides. As a result, peptoid backbone lacks of chirality and hydrogen bond donors. This unique structure gives polypeptoids a combined merit of both high stability as synthetic polymers and biocompatibility as biopolymers. In addition, peptoid sequences can be engineered precisely to assemble specific crystalline patterns such as spheres, fibers, ribbons, tubes, and sheets, which shows promising potentials of polypeptoids for different applications such as antimicrobials, catalysts, drug delivery, and templating inorganic materials. In this review, we summarize recent investigations into hierarchical self-assembly pathways and molecular structures of peptoid crystals that are of interest as templates for fabricating functional materials for potential biomedical, biochemical, and bioengineering applications. Furthermore, this review provides a summary of recent experimental and computational studies of polypeptoid assembly in solution and solid-liquid interfaces, current achievements in the field, and discusses future challenges and opportunities for the rational design of self-assembled polypeptoid nanomaterials.

36 MATERIALS SCIENCE↗

Transport and Assembly of Magnetic Surface Rotors**

This minireview focuses on recent advances with surface magnetic rotors, namely field-responsive spherical or anisotropic microparticles that translate close to, or are embedded in a confining surface. The application of external magnetic modulations allows these microscopic wheels to be remotely spun and steered while also tuning their interactions and inducing assembly from a collection of disordered, moving units. With optical microscopy one can observe and characterize the complex collective phenomena that emerge in dissipative colloidal systems driven far from equilibrium by external fields. From a technological point of view, magnetic surface rotors envisage implementation into microfluidic devices, and can be used for drug delivery, mixing as well as a model system for biological active matter.

36 MATERIALS SCIENCE↗

Integrating terrestrial scavenging ecology into contemporary wildlife conservation and management

Scavenging plays a vital role in maintaining ecosystem health and contributing to ecological functions; however, research in this sub-discipline of ecology is underutilized in developing and implementing wildlife conservation and management strategies. We provide an examination of the literature and recommend priorities for research where improved understanding of scavenging dynamics can facilitate the development and refinement of applied wildlife conservation and management strategies. Due to the application of scavenging research broadly within ecology, scavenging studies should be implemented for informing management decisions. In particular, a more direct link should be established between scavenging dynamics and applied management programs related to informing pharmaceutical delivery and population control through bait uptake for scavenging species, prevention of unintentional poisoning of nontarget scavenging species, the epidemiological role that scavenging species play in disease dynamics, estimating wildlife mortalities, nutrient transfer facilitated by scavenging activity, and conservation of imperiled facultative scavenging species. This commentary is intended to provide information on the paucity of data in scavenging research and present recommendations for further studies that can inform decisions in wildlife conservation and management. Additionally, we provide a framework for decision making when determining how to apply scavenging ecology research for management practices and policies. Due to the implications that scavenging species have on ecosystem health, and their overall global decline as a result of anthropic activities, it is imperative to advance studies in the field of scavenging ecology that can inform applied conservation and management programs.

54 ENVIRONMENTAL SCIENCES↗

Interactions Between Climate and Species Drive Future Forest Carbon and Water Balances

Global change is altering forest carbon and water balances; however, the extent to which tree species shape ecosystem‐scale responses to climate, particularly in biodiverse forests, remains unclear. To address this, we simulated the effects of an envelope of future climate conditions on watershed carbon and water balances and quantified the contributions of tree species based on their xylem anatomy. We accomplished this by incorporating species‐level transpiration calculations into a landscape‐scale ecosystem process model. Our revised model linked the effects of forest succession, species composition, and climate change on water and carbon. Calibration of forest water fluxes using sap flux measurements and catchment water balances captured variability in species transpiration and interannual ET in biodiverse, humid temperate forest catchments in the southern Blue Ridge Mountains, USA. Across wet and dry future climate projections, ET increased, and streamflow and net carbon uptake decreased, particularly under a scenario of increasing drought. Despite accounting for just 30% of current biomass, diffuse‐porous tree species were the main driver of carbon and water flux responses now and in the future, thus intensifying the increase in ET and decline in streamflow. As diffuse‐porous biomass continues to increase, these forests will be increasingly sensitive to drought, amplifying losses of carbon sequestration and freshwater delivery.

54 ENVIRONMENTAL SCIENCES↗

Construction of the Bioconjugate Py‐Macrodipa‐PSMA and Its In Vivo Investigations with Large 132/135 La 3+ and Small 47 Sc 3+ Radiometal Ions

To harness radiometals in clinical settings, a chelator forming a stable complex with the metal of interest and targets the desired pathological site is needed. Toward this goal, we previously reported a unique set of chelators that can stably bind to both large and small metal ions, via a conformational switch. Within this chelator class, py-macrodipa is particularly promising based on its ability to stably bind several medicinally valuable radiometals including large 132/135 La 3+ , 213 Bi 3+ , and small 44 Sc 3+ . Here, in this study, we report a 10-step organic synthesis of its bifunctional analogue py-macrodipa-NCS, which contains an amine-reactive −NCS group that is amenable for bioconjugation reactions to targeting vectors. The hydrolytic stability of py-macordipa-NCS was assessed, revealing a half-life of 6.0 d in pH 9.0 aqueous buffer. This bifunctional chelator was then conjugated to a prostate-specific membrane antigen (PSMA)-binding moiety, yielding the bioconjugate py-macrodipa-PSMA, which was subsequently radiolabeled with large 132/135 La 3+ and small 47 Sc 3+ , revealing efficient and quantitative complex formation. The resulting radiocomplexes were injected into mice bearing both PSMA-expressing and PSMA-non-expressing tumor xenografts to determine their biodistribution patterns, revealing delivery of both 132/135 La 3+ and 47 Sc 3+ to PSMA+ tumor sites. However, partial radiometal dissociation was observed, suggesting that py-macrodipa-PSMA needs further structural optimization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Black carbon emissions from modern automated cordwood stoves for space heating

Wood burning stove design is improving as regulation become stricter for particulate matter emissions. Here, this study describes results of black carbon (BC) emissions from three modern automated wood stoves when tested in common failure modes using a test protocol that included cold-starts, high and low fuel loading densities, and use of overly large pieces of fuel. Emission sampling was performed using a dilution sampling system in tandem with an aethalometer to measure BC with high time resolution. Results show that the time-weighted average BC emission rates were 0.91, 4.30, and 1.74 g/h for the three stoves tested (A, B, and C respectively), the values, both higher and lower than the United States 2020 certification test emission limit of 2.5 g/h. The results demonstrate good performance overall, given the rigorous nature of the testing protocol used. The aethalometer data showed that the performance was relatively poor during cold-start, when the fuel was ignited and combusted without a coalbed, and when stoves failed to optimize air delivery due to specific loading and output conditions. During the cold-start test section, the average BC emission rate was seven times higher than the overall average for Stove A, 10 times above the average for Stove B, and two times above the average emission rate for Stove C. Calculations of the Average Angstrom Absorption Exponent (AAE) of the exhaust aerosol showed little correlation with BC concentration. The results show that automation results in a quantifiable reduction in particular BC emissions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Thorium chelators for targeted alpha therapy: Rapid chelation of thorium-226

We report one of the main challenges in targeted alpha therapy is assuring delivery of the α-particle dose to the targeted cells. Thus, it is critical to identify ligands for α-emitting radiometals that will form complexes that are very stable, both in vitro and in vivo. In this investigation, thorium-227 (t 1/2 = 18.70 days) chelation of ligands containing hydroxypyridinonate (HOPO) or picolinic acid (pa) moieties and the stability of the resultant complexes were studied. Chelation reactions were followed by reversed-phased HPLC and gamma spectroscopy. Studies revealed that high 227 Th chelation yields could be obtained within 2.5 h or less with ligands containing four Me-3,2-HOPO moieties, 1 (83%) and 2 (65%), and also with ligands containing pa moieties, H 4 octapa 3 (65%) and H 4 py4pa 6 (87%). No reaction occurred with H 4 neunpa-p-Bn-NO 2 4, and the chelation reaction with another pa ligand H 4 pypa 5 gave inconsistent yields with a very broad radio-HPLC peak. The ligands spermine-(Me-3,2-HOPO) 4 1, H 4 octapa 3, and H 4 py4pa 6 had high stability (i.e., 87% of 227 Th still bound to the ligand) in phosphate-buffered saline at room temperature over a 6-day period. Preliminary studies with ligand 6 demonstrated efficient chelation of thorium-226 (t 1/2 = 30.57 min) when heated to 80°C for 5 min.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assessment of antimicrobial activity of melittin encapsulated in bicontinuous microemulsions prepared using renewable oils

Abstract The objective of this study is to demonstrate that melittin, a well‐studied antimicrobial peptide (AMP), can be solubilized in an active form in bicontinuous microemulsions (BMEs) that employ biocompatible oils. The systems investigated consisted of Winsor‐III and ‐IV BME phases composed of Water/Aerosol‐OT (AOT)/Polysorbate 85/isopropyl myristate and a Winsor‐IV BME employing Polysorbate 80 and limonene. We found that melittin resided in an α‐helix‐rich configuration and was in an apolar environment for the AOT/Polysorbate 85 Winsor‐III system, suggesting that melittin interacted with the surfactant monolayer and was in an active conformation. An apolar environment was also detected for melittin in the two Winsor‐IV systems, but to a lesser extent than the Winsor‐III system. Small‐angle X‐ray scattering analysis indicated that melittin at a concentration of 1.0 g/L aq in the aqueous subphase of the Winsor‐IV systems led to the greatest impact on the BME structure (e.g., decrease of quasi‐periodic repeat distance and correlation length and induction of interfacial fluidity). The antimicrobial activity of the Polysorbate 80 Winsor‐IV system was evaluated against several bacteria prominent in chronic wounds and surgical site infections (SSIs). Melittin‐free BMEs inhibited the growth of all tested bacteria due to its oil, limonene, while the inclusion of 1.0 g/L aq of melittin in the BMEs enhanced the activity against several bacteria. A further increase of melittin concentration in the BMEs had no further enhancement. These results demonstrate the potential utility of BMEs as a delivery platform for AMPs and other hydrophilic and lipophilic drugs to inhibit antibiotic‐resistant microorganisms in chronic wounds and SSIs.

59 BASIC BIOLOGICAL SCIENCES↗

Gramicidin and chlorhexidine encapsulated in bicontinuous microemulsions: Antimicrobial activity performance and their impact on self‐assembly

The utility of bicontinuous microemulsions (BMEs) as carriers of the antimicrobial peptide (AMP) gramicidin D and antiseptic chlorhexidine was investigated for possible topical delivery to chronic wounds. The two water-insoluble solutes dissolved in pre-formed one-phase BMEs of Water/Polysorbate 80/Limonene/Ethanol/Glycerol and Water/Aerosol-OT (AOT)/Polysorbate 85/Isopropyl Myristate and an AOT/Polysorbate 85 Winsor-III system, achieving gramicidin and chlorhexidine concentrations of 1.0 wt% and 0.5% individually and 0.5% and 0.3% in mixtures at 22°C, respectively. Small-angle neutron scattering measurements demonstrated that both solutes decreased surfactant interfacial activity and increased interfacial fluidity for the Polysorbate 80 system. For the AOT/Polysorbate 85 systems, ellipsoidal aggregates consisting of gramicidin and likely adsorbed surfactant and oil formed, while chlorhexidine enhanced the surface activity of surfactants. According to bioassays performed on artificial skin, the incorporation of melittin, gramicidin, and chlorhexidine in general enhanced the bioactivity of Polysorbate 80 BMEs for 24 h treatment against relevant antibiotic-resistant bacteria found on skin relative to controls. Yet, BME treatments were less effective than aqueous melittin control, in contrast to well diffusion bioassays performed previously. The results reflect the strong impact of AMPs and antiseptics on BME structure and dynamics and the complexity of formulating BMEs for optimal antimicrobial activity.

antimicrobial peptides↗

Plasticity of Behavioral and Growth Responses to Two Feeding Regimes and Implications for the Domestication of Steelhead Trout

Abstract The effects of domestication selection on fitness are of serious concern in hatchery-reared anadromous salmonids, which often experience selection for rapid growth and associated deviations from natural agonistic and feeding behaviors. The high rations that are used to raise age-1 smolts and the reduced rations that are used to produce age-2 smolts potentially result in very different behavioral tactics and social dynamics of competition in hatchery tanks. Consequently, steelhead Oncorhynchus mykiss hatchery programs with recovery or conservation goals may need to change their aquaculture practices to minimize domestication selection. This study investigated how the feeding rate (proportion of presented food items that were successfully captured) and relative competitive ability (ability to monopolize food items in small groups) of age-1 and age-2 steelhead corresponded to feeding location (surface or bottom) and growth rate in hatchery rearing tanks. We raised steelhead from a common broodstock to smolt at age 1 or age 2 by manipulating their rations (age-1 fish received the high ration, age-2 the low ration). The fish in the age-1 treatment had a lower feeding rate than did those in the age-2 treatment. Feeding rate was positively correlated with both body size and with growth rate in the rearing tanks at both rations. The age-2 steelhead were more likely to be detected at a single feeding location than were the age-1 fish, which were more frequently detected at both locations. The more competitive age-1 fish were more frequently detected at both feeding locations, and the less competitive fish were detected at only one location. Relative competitive ability was not associated with feeding location in the age-2 treatment, nor was it associated with growth rate in either treatment. Age-2 steelhead that were detected only at the bottom or at both feeding locations had higher growth rates than those that were detected only at the surface, suggesting greater scramble competition near the point of food delivery under the restricted ration. Feeding location was not associated with growth rate in the age-1 treatment. The results indicate that ration directly affects feeding rate and that ration and relative competitive ability interact to influence feeding rate. Because feeding rate was positively associated with growth rate at both ration levels in the hatchery tanks, behaviors that are associated with feeding motivation may be an important trait under selection in salmonid hatcheries.

Tatara, Christopher P.↗

Effect of network connectivity on the mechanical and transport properties of block copolymer gels

Establishing the independent tunability of transport and mechanical properties in polymer gels would significantly contribute to their implementation as transdermal drug delivery media, among other things. The work conducted herein uses facile changes in the formulation of physically crosslinked styrenic ABA/AB block copolymer organogels to alter their mechanical properties independently from the mass transport of an internally-loaded nanocarrier. Therefore, such independent tunability is made possible by altering the relative amounts of ABA triblock and AB diblock copolymers while holding total copolymer concentration fixed. Specifically, three series of gels each with a fixed total copolymer concentration (10, 20, or 30 wt%) comprised of varying triblock copolymer concentration are studied. Small angle x-ray scattering confirms that, at the nanoscale, only gel network connectivity changes within each series, while mechanical and release experiments show that increasing network connectivity leads to significant growth of gel moduli, but little change in nanocarrier release rate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

One hundred priority questions for advancing seagrass conservation in Europe

Societal Impact Statement Seagrass ecosystems are of fundamental importance to our planet and wellbeing. Seagrasses are marine flowering plants, which engineer ecosystems that provide a multitude of ecosystem services, for example, blue foods and carbon sequestration. Seagrass ecosystems have largely been degraded across much of their global range. There is now increasing interest in the conservation and restoration of these systems, particularly in the context of the climate emergency and the biodiversity crisis. The collation of 100 questions from experts across Europe could, if answered, improve our ability to conserve and restore these systems by facilitating a fundamental shift in the success of such work. Summary Seagrass meadows provide numerous ecosystem services including biodiversity, coastal protection, and carbon sequestration. In Europe, seagrasses can be found in shallow sheltered waters along coastlines, in estuaries & lagoons, and around islands, but their distribution has declined. Factors such as poor water quality, coastal modification, mechanical damage, overfishing, land‐sea interactions, climate change and disease have reduced the coverage of Europe’s seagrasses necessitating their recovery. Research, monitoring and conservation efforts on seagrass ecosystems in Europe are mostly uncoordinated and biased towards certain species and regions, resulting in inadequate delivery of critical information for their management. Here, we aim to identify the 100 priority questions, that if addressed would strongly advance seagrass monitoring, research and conservation in Europe. Using a Delphi method, researchers, practitioners, and policymakers with seagrass experience from across Europe and with diverse seagrass expertise participated in the process that involved the formulation of research questions, a voting process and an online workshop to identify the final list of the 100 questions. The final list of questions covers areas across nine themes: Biodiversity & Ecology; Ecosystem services; Blue carbon; Fishery support; Drivers, Threats, Resilience & Response; Monitoring & Assessment; Conservation & Restoration; Governance, Policy & Management; and Communication. Answering these questions will fill current knowledge gaps and place European seagrass onto a positive trajectory of recovery.

Nordlund, Lina Mtwana↗