Results for “cleaning performance” — Page 38

DOE OSTI2026

Comparing Liquid Vortex Capture & the Rapid Droplet Sampling Interface for Single Cell Mass Spectrometry

High-throughput single-cell mass spectrometry is a rapidly evolving field that requires innovative sampling and ionization techniques to balance speed, sensitivity, and reliability for metabolomic and lipidomic analyses. This study provides a comparative analysis of two cutting-edge ionization platforms for single-cell analysis: Liquid Vortex Capture (LVC) and Rapid Droplet Sampling Interface (RDSI). The performance was benchmarked by testing pharmaceuticals, EquiSPLASH, and single-cell experiments. RDSI demonstrated up to 100-fold improvements in sensitivity for drugs and lipids such as propranolol, amiodarone, atorvastatin, and phosphocholines in water and phosphate-buffered solutions. This was attributed to its low-flow rate operation (3 μL/min) and reduced dilution. Conversely, LVC excelled in handling higher liquid volumes with greater reproducibility due to its higher solvent flow rate (200 μL/min), enabling increased dilution, solubility, and cleaning. Single-cell uptake of atorvastatin incubated for 10 min, or amiodarone incubated for 24 h in HepG2 cells, similarly revealed up to 85-fold enhancement in sensitivity by RDSI for drugs and lipids. These findings highlight the potential of RDSI for enhancing sensitivity in single-cell drug monitoring and lipidomics.

Cahill, John [ORNL] (ORCID:0000000298664010)↗

DOE OSTI2024

Characterizing the effects of drive asymmetries, component offsets, and joint gaps in double shell capsule implosions

This work provides a numerical study of how double shell capsule deformations caused by drive asymmetries and fabrication imperfections affect implosion symmetry and neutron yield. Hydrodynamics simulations are performed in two dimensions and focus on low-mode deformations that are caused by corresponding asymmetries in the Hohlraum drive, component offsets, and ablator joint gaps. By providing a parameter study of these features, our goal is to understand the dominant sources for inner shell deformation and yield degradation. The discussed capsules are composed of an aluminum ablator with a chromium inner shell. The latter encloses a carbon-deuterium foam ball that serves as fuel. We find that for clean capsules, even-numbered low-mode asymmetries in the drive are imprinted on the ablator and smoothly transferred to the inner shell during shell collision. The resulting deformation of the inner shell is more pronounced with larger fuel radius, while the yield is inversely proportional to the amplitude of the drive asymmetry and varies by factors ≤4 in comparison with clean simulations. Capsule component offsets in the vertical direction and ablator thickness nonuniformity result in p1-type deformations of the imploding inner shell. Finally, joint gaps have the largest effect in deforming the ablator and inner shell and degrading yield. While small gap widths (1 μm) result in prolate inner shells, larger gap widths (4 μm) cause an oblate deformation. More importantly, capsules with a small outer gap (1 μm) experience a dramatic drop in yield, typically <3% of a clean simulation.

Goodarzi, S. (ORCID:000000018556489X)↗

DOE OSTI2021

5.5 Hybrid Additively Manufactured Tooling for Large Composite Structures

This program sought to lower tooling costs for tightly toleranced, large composite aerostructures by using large format additive manufacturing (LFAM). LFAM tooling has the potential to lower tooling costs, but the large and unpredictable thermal expansion of polymer-based tooling did not previously allow for the production of large structures made with high performance resins requiring 350 deg F cures. Geometric tolerance issues and demolding concerns continued to arise. The proposed approach for this work was to print a thin shell via additive manufacturing that would be used as a scaffold for a conventional tooling prepreg. The prepreg would be laminated and cured onto both sides of the shell, creating a tool with a sandwich construction. The cured prepreg would then be machined and serve as the tooling surface. In addition to providing a clean, pit-free surface, the prepreg stiffness and low thermal expansion would physically restrain the AM shell and prevent it from expanding during thermal cycling, thus preventing any geometric mismatch between the nominal and actual part dimensions. A stair-step approach was taken to prove out this approach. Coupon level testing was done to ensure a good bond was possible between the AM shell and the tooling prepreg. These samples were also used to determine the amount of prepreg needed to achieve the desired coefficient of thermal expansion (CTE). The project team than progressed to a subscale tool measuring two feet in length. The geometry used was a C-section spar from Airbus’ Wing of Tomorrow program. A hybrid tool, using the AM shell and tooling prepreg, was made, and a composite part was fabricated with the tool. Dimensional scans of the tool and part indicated that the desired CTE was achieved with the tool. A second tooling approach was taken to reduce risk. In this approach, a subscale tool of the same geometry as previously mentioned was created, but the tool was entirely constructed of the tooling prepreg. AM was used to print a “master” that was then used to fabricate the tool by creating a splash off of the master using tooling prepreg. The innovation was that the master was not machined, but rather, was used right off the printer after a small amount of surface preparation. Removing this machining step was thought to make this approach economically viable when compared to conventional master fabrication. As before, the tool was used to fabricate a part and tested for dimensional accuracy. For the conclusion of the program, a ten-foot tool was created using the hybrid tool approach. The geometry also came from the Airbus C-section spar previously mentioned. Some difficulty arose in accurately predicting the geometry of the tool after laminating the tooling prepreg, resulting in multiple material additions and a tool geometry change. A part was fabricated in an autoclave using the tool. A cost savings of almost 50% was achieved on the subscale tool in both the hybrid and master-style tool, but the savings dropped considerably as the tool length increased in the full-scale tool. Given the less than expected cost savings and added complexity of the tool construction, it is suggested that the master-style tool is best for immediate commercialization for larger tools (although it may be appropriate for smaller, table-top size tools). Since its construction is very similar to conventionally made composite tooling, there already exists a broad supply chain for building the tool, and project partner Additive Engineering Solutions (AES) is well acquainted with the design and build of the AM master needed.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Electric Vehicle Managed Charging: Forward-Looking Estimates of Bulk Power System Value

When and where electric vehicle charging occurs has significant implications for power systems supporting widespread electric vehicle deployment with high shares of wind and solar generation. Numerous studies have estimated the value of scheduling or otherwise managing electric vehicle charging in such power systems. This study improves on those earlier works by leveraging detailed simulation models for electric vehicle adoption, electric vehicle use, electric vehicle charging, and bulk power system operations; and linking them with methods for describing charging flexibility at both the individual vehicle and aggregate levels. This study closely analyzes electric vehicle managed charging (EVMC) performance along the dimensions of flexibility type (within-charging session or within-week scheduling), dispatch mechanism (direct load control or one of several price-based mechanisms), and participation rate, under the assumptions of ubiquitous chargers and all trips completed on time. The study is located in a passenger light-duty vehicle adoption scenario with 100% electric vehicle sales by 2035, and in an envisioned 2038 New England power system for which within-region generation is 84% clean.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2025

Lower Snake River Dams Contribution to Grid Services

Hydroelectric generation and water storage have long been components of the clean energy mix, providing both reliable steady output and operational flexibility. As variable renewable energy sources such as wind and solar increasingly replace traditional generation, the role of all flexible resources—including hydropower—in balancing supply and demand continues to evolve. This study examined the contribution of the Lower Snake River (LSR) Dam plants to Bonneville Power Administration grid services in maintaining power system reliability within the Western Interconnection. By analyzing publicly available data, the study evaluated various reliability services through performance metrics including energy capacity, balancing and ramping, voltage and reactive power support, frequency response, and transmission impact. Results indicated that the LSR plants deliver services as expected based on their size, contributing to the balancing process, ramping capabilities, and operational reserves, particularly during peak load conditions and weather events, while also providing measurable frequency and voltage support to the grid.

13 HYDRO ENERGY↗

DOE OSTI2019

Improvement in Ultrasound Liquid Machining by Activating Cavitational Clusters

In the erosion-free zone that appears during high-amplitude ultrasound treatment, the useful work is mainly performed by cavitational clusters. In the absence of collapse, the clusters grow and produce small-scale turbulence. As shown in the present work, cavitational clusters may be activated by the additional acoustic pressure arising when a low-amplitude source is coaxial with the high-amplitude source.

42 ENGINEERING↗

DOE OSTI2021

Accomplishments and Year-End Performance Report; Wind Energy Program: Fiscal Year 2021

The National Wind Technology Center (NWTC), located at the U.S. Department of Energy's (DOE's) National Renewable Energy Laboratory (NREL) Flatirons Campus, has been a driving force in advancing wind energy technology research worldwide since its designation as a DOE national research center in 1992. Enabled by the Flatirons Campus's world-class facilities, scientists, engineers, analysts, and researchers are pushing the frontiers of science to pursue wind energy innovation. In Fiscal Year (FY) 2021, NREL continued to provide the technical expertise, research capabilities, and industry understanding to support DOE's ambitious climate action and research goals by advancing technology, addressing market and deployment barriers, and driving down costs with more efficient, reliable, and predictable wind energy systems. One of several highlights, NREL received an R&D 100 Special Recognition Award for its Thermoplastic Resin System for Wind Turbine Blades. This breakthrough in the wind turbine manufacturing process will enable the production of recyclable blades that are stronger, longer, and less expensive, while increasing energy capture, decreasing energy and transportation costs, and increasing blade reliability. In a year when the entire U.S. economy struggled to address workforce gaps, an NREL study compared wind industry needs, training programs, and hiring practices with perspectives from students and recent college graduates. Researchers hope that, by pinpointing areas of disconnect, the expectations of employers who have difficulty filling entry-level jobs can better align with the preparation of the potential applicants who find it hard to break into the field. The lab also made numerous new data and modeling resources available in FY 2021. Recent NREL releases include a modeling tool for predicting the power performance and structural loads of wind turbines within a wind farm (FAST.Farm), a computational framework for modeling golden eagle behavior near wind farms, and 20 years of offshore wind data. Updates were also made to the widely used Wind Plant Integrated Systems Design and Engineering Model (WISDEM), which couples engineering and cost models to examine system-level trade-offs. Now, bolstered by a renewed national commitment to tackle climate change and revitalize the U.S. economy through increased investment in clean energy - particularly in offshore wind energy - NREL stands poised to lead the way to a sustainable future that powers the United States with significant levels of reliable, low-cost, accessible wind energy. This report provides an overview of the achievements NREL made on behalf of DOE's Wind Energy Technologies Office (WETO) and other partners during FY 2021 (between Oct. 1, 2020, and Sept. 30, 2021).

Flatirons Campus↗

DOE OSTI2023

Long-Term Scenarios of Transportation Decarbonization

Achieving a net-zero emissions economy by 2050 requires aggressive curbing of transportation emissions, currently the largest source of U.S. greenhouse gas (GHG) emissions and the fastest growing source of emissions in many countries. Transportation, a heterogeneous sector with many different passenger and freight travel modes and applications, will require a portfolio of solutions to decarbonize. To inform how to achieve significant emissions reductions in U.S. passenger and freight mobility, researchers used the Transportation Energy and Mobility Pathway Options (TEMPO) model to explore many transformation pathways under expert-informed bounding ranges of assumptions on future travel behavior, technology advancements, and policies. Researchers performed more than 2,000 simulations to explore possible transformation pathways and found that a combination of technological, behavioral, and policy strategies enables a staggering 89% reduction in transportation GHG emissions by 2050. Key is the rapid adoption of zero-emission electric vehicles (EVs) for all on-road passenger and freight applications, alongside a simultaneous decarbonization of electricity (supported by managed charging and proper planning). Managing travel demand growth can ease the transition by reducing the requisite amount of clean electricity and sustainable fuels supply.

ADVANCED PROPULSION SYSTEMS,ENERGY PLANNING, POLIC↗

DOE OSTI2022

Optimal Sizing and Operation of a Hybrid Clean Energy Center

In this paper, we consider the deployment of battery energy storage systems (BESSs) paired with photovoltaics (PV) to form a hybrid clean energy center (HCEC), where the BESS is equipped for two main purposes: i) reducing the volatility of PV output and ii) shifting energy to meet an export limit. We develop a linear dynamical model to characterize the output of an HCEC and express the volatility and export power as functions of the battery's dispatch operations. We also propose an optimal sizing method via second-order cone programming (SOCP) to maximize the net benefits of the HCEC. Numerical studies are performed to illustrate and validate the proposed method.

Battery energy storage systems, photovoltaics, sec↗

DOE OSTI2021

Minimizing Cr-Evaporation from Balance Of Plant Components By Utilizing Cost-Effective Alumina-Forming Austenitic Steels

A solid oxide fuel cell (SOFC) is a clean and efficient energy conversion device. The development of intermediate-temperature SOFCs has made it preferable to use metallic interconnects (MICs) to greatly reduce the cost and significantly increase the efficiency compared to ceramic interconnect materials. However, gaseous chromium species will evaporate from the chromium-containing layer formed on the surface of commonly used MICs and balance of plant (BoP) components. Volatile chromium species have been shown to form solid deposits which poison the cathodes of SOFCs, causing drastic cell performance degradation and thereby limiting commercialization. In order to alleviate the Cr poisoning and achieve long-term high performance of SOFC stacks, various Al 2 O 3 -forming austenitic (AFA) stainless steels applied at different temperatures are evaluated in this project. Based on our Phase I results (500 h operation), it is shown that on the AFAs, an alumina-based protective layer forms under high temperature that is invulnerable to water vapor effects and suppresses the diffusion of chromium and manganese which can prevent the generation of spinels on the alloy surface. Therefore, 310S, OC4 and OC5 at 800 °C and 625, OC11 and OC11LZ at 900 °C are selected to be tested in the Phase II long-term operation. From the results, we find that besides the lower Cr evaporation rates and better oxidation resistance of AFAs than benchmark alloys after short-term (500 h) operation, AFAs also possess the sturdy and compact alumina layer after a long-term operation (5000 h). A protective oxide layer is of great importance for the long-term high-temperature operation of structural materials. The high-temperature oxidation behavior of AFAs and commercial 310S and 625 alloys in Air + 10% H 2 O at 800 °C and 900 °C is systematically investigated. Severe breakaway oxidation and minor spallation are observed for the 310S and 625 after the long-term operation, while the AFAs show high oxidation resistance. It is found that the formation of a continuous alumina layer could greatly prevent the volatilization of chromium vapors. In addition, the corresponding evolving models are discussed. Chromium evaporation from BoP components in high-temperature environment could severely deteriorate the electrochemical performance of SOFC. Several methods were applied to evaluate the Cr evaporation rates of BoP after 500 h exposure at 800 °C to 900 °C in air with 10% H 2 O. An optimal method was designed to exclude the effect of silicon (Si) deposits from quartz tube and sodium (Na) deposits from the sodium carbonate on the oxidation process and the chemical interaction between Cr gaseous species and alumina tube which could provide further quantitative correlation of the evaporated Cr species quantities and degradation rates of SOFC. Based on the great performance of AFAs after long-term operation, AFAs are assembled with Anode-supported cells (ASC) to investigate the the Cr deposition of anode-supported cell under a constant current density of 0.5 A cm -2 at 800 °C with AFA alloys compared with commercial alloys. In addition, the anodic and cathodic processes are deconvoluted by distribution of relaxation times (DRT) method which are comprehensively discussed. It is found out that the voltage exhibited a slight decrease of 5.09 % and 1.54 % in the presence of OC11 and OC11LZA alloy, respectively. However, a considerable decrease of 22.14 % and 12.06 % was determined in the presence of 310S and 625 alloy, respectively. AFAs possessing the low-cost, low Cr evaporation rates and the high oxidation resistance will make it of great potential to replace the existing BoP components.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2024

Power Electronics Manufacturing Improvements for Heavy-Duty Fuel Cell Vehicles

The Marel Power Solutions project, funded by the U.S. Department of Energy under Award DE-SC0023801, focused on advancing manufacturing techniques for power electronics in heavy-duty fuel cell vehicles. The research aimed to enhance system efficiency, reduce costs, and support broader adoption of hydrogen fuel cell technology. Key areas of investigation included power topology, thermal modeling, system architecture, and accessibility through software tools. Key Accomplishments: 1. Power Topology: - Developed an interleaved boost converter with optimized phase count, leveraging Marel’s proprietary Power Stacks. - Achieved reduced parasitic inductance and resistance, enabling high efficiency in DC-DC converters. 2. Thermal Modeling: - Integrated innovative cooling systems into compact Silicon Carbide (SiC) modules. - Simulations demonstrated the ability to dissipate significant heat (up to 7.5 kW), ensuring device reliability under heavy loads. 3. System Architecture: - Utilized simulation tools to analyze the impact of various fuel cell and vehicle parameters on efficiency. - Highlighted the role of smaller, modular improvements, such as enhanced DC-DC converters, in achieving system-wide gains. 4. Accessibility: - Evaluated and implemented MATLAB/Simulink code generation tools for real-world hardware applications. - Demonstrated the potential for rapid prototyping of custom power systems with reduced development costs. Impact and Benefits: - Efficiency and Cost Reduction: Marel’s cooling technology enhances SiC die performance, reducing the number of dies required and overall system size. - Scalability and Flexibility: The innovations support tailored solutions for diverse applications, from mass transit to mining vehicles. - Sustainability: The research promotes the integration of electrification technologies, helping meet rising energy demands sustainably. Conclusion: The project’s outcomes advance the state of power electronics for hydrogen fuel cell vehicles, enabling more efficient, compact, and cost-effective solutions. These developments lay a foundation for future innovation, contributing to the broader adoption of clean energy technologies in transportation and other industries.

08 HYDROGEN↗

DOE OSTI2025

Photovoltaic Mini-Module Soiling Stations: Cooperative Research and Development (Final Report)

Photovoltaic (PV) panels can become soiled due to a variety of environmental factors. This soiling reduces the amount of light reaching the cells and thus their energy output. The ratio of actual output of the soiled device that of a clean device is known as the soiling ratio. The daily change in soiling ratio is known as the soiling rate. To study soiling for different glass coatings. Two soiling stations were fabricated. The stations were designed to monitor the short-circuit current of PV cells encapsulated with glass featuring different coatings and measure the daily soiling ratio with a pair of reference cells, one of which is automatically brushed daily. This work meets the need to understand how the glass coatings perform in additional environments. The stations are designed to quantify both the soiling ratio (the ratio between actual/expected photovoltaic panel power output) as well as differences in anti-soiling performance of different glass coatings. The design of the dirty/clean reference cell system is described by Toth et al. The soiling ratio is calculated by calculating the average irradiance measured within one hour of solar noon by each of the reference cells and then taking the ratio of these daily near-noon averages. The soiling ratio time series for the station deployed in Georgia is shown in Figure 1. This figure shows that the soiling ratio at the site has not yet fallen below 0.99, indicating that peak daily soiling losses have been below 1%. The site was chosen because it is thought to be affected by pollen soiling. With continued monitoring over the course of at least a full year, we expect to be able to observe and quantify pollen soiling events.

14 SOLAR ENERGY↗

DOE OSTI2024

KBase Narrative - Porphyromonadaceae sp. W3.11 genome

Narratives for The phenotype and genotype of fermentative prokaryotes This is the Narrative for Porphyromonadaceae sp. W3.11. A complementary Narrative for Lachnospiraceae sp. C1.1 is available here. This is the Narrative for Lachnospiraceae sp. C1.1. A complementary Narrative for Porphyromonadaceae sp. W3.11 is available here. Background and Isolation This Narrative and its complementary Narrative contain assembly and annotation of two bacterial isolates that were isolated by our laboratory from the rumen of a Holstein heifer. All procedures with animals have been approved by University of California Davis’s Institutional Animal Care and Use Committee. Rumen contents were collected through a rumen fistula and strained through two layers of cheesecloth into a bottle. The bottle was sealed to exclude air and maintained at 39°C. Contents were brought to the laboratory and bubbled under O2-free CO2 within 15 min. At the laboratory, serial dilutions were made with anaerobic dilution solution for Lachnospiraceae sp. C1.1 and propionibacterium diluent for Porphyromonadaceae sp. W3.11 (table S2). Aliquots (0.1 ml) of each dilution were injected into anaerobic bottle plates (1) containing 9 ml of LH medium (table S2). After incubation at 37°C for 7 days, isolated colonies were picked. Lachnospiraceae sp. C1.1 was picked from a bottle inoculated with a 104 dilution of rumen contents, and Porphyromonadaceae sp. W3.11 was picked from a bottle inoculated with a 103 dilution. After initial isolation, these organisms were purified by growing on anaerobic roll tubes (2) and picking isolated colonies. We performed de novo sequencing of Lachnospiraceae sp. C1.1 and Porphyromonadaceae sp. W3.11. Aliquots of liquid culture (9 and 1.5 ml, respectively) were collected by syringe and centrifuged (21,000g for 10 min at 4°C). Cell pellets were submitted to Molecular Research LP for DNA extraction, library preparation, and sequencing. After resuspending pellets in 180 µl of ATL buffer (Qiagen), DNA was extracted using the MagAttract HMW DNA Kit (Qiagen). DNA was eluted in 100 µl of AE buffer (Qiagen) and then cleaned using the DNEasy PowerClean Pro Cleanup Kit (Qiagen). DNA was then sheared using the Covaris g-TUBE (Covaris). Sequencing libraries were prepared using the SMRTbell Express Template Prep Kit 2.0 (Pacific Biosciences) and 1500 ng of the sheared and purified DNA. The SMRTbell libraries were size-selected (>6 Kb) using a BluePippin instrument (Sage Science) and 0.75% agarose gel. Libraries were then sequenced using the PacBio Sequel II (Pacific Biosciences) platform and a 30-hour movie time. Narrative Summary In these Narratives, we filtered low-quality reads using Trimmomatic (v0.36), assembled filtered reads with SPAdes (v3.15.3), and then checked completeness and contamination of the assembled genomes with CheckM (v1.0.18). Statistics for sequencing and assembly are in table S3. Using the assembled contigs (genomes), we called genes and annotated them. Protein-coding genes were called using Prodigal (v2.6.3) (3) locally or using KBase via RASTtk (v1.073), with identical results. Genes were annotated with KO IDs using KAAS (4). They were further annotated with pfam and TIGRFAM IDs using KBase and the Annotate Domains in a Genome app. We classified putative genes for hydrogenases using HydDB. Genes for 16S ribosomal RNA (rRNA) were called using RASTtk (v1.073) in KBase. The contigs (genomes) were analyzed to determine whether they belonged to new species. Taxonomy was assigned using GTDB-Tk (v1.7.0) in KBase. The identity of 16S rRNA genes to other organisms was found using EzBioCloud (5). Values of digital DNA-DNA hybridization (dDDH) were found with Type (Strain) Genome Server (6). These analyses suggest that Lachnospiraceae sp. C1.1 and Porphyromonadaceae sp. W3.11 represent novel species or genera. GTDB-Tk assigned Lachnospiracae sp. C1.1 to family Lachnospiraceae and genus NK4A144, which contains no type strains. It assigned Porphyromonadaceae sp. W3.11 to Porphyromonadaceae and genus Porphyromonas_A. Values of 16S rRNA identity and dDDH with respect to type strains were low (table S4). Although more phenotypic data are needed, available evidence supports assignment of genomes to new species or genera. Related publication Hackmann TJ, Zhang B. The phenotype and genotype of fermentative prokaryotes. Sci Adv. 2023 Sep 29;9(39):eadg8687. doi: 10.1126/sciadv.adg8687. Epub 2023 Sep 27. PMID: 37756392; PMCID: PMC10530074.

Hackmann, Timothy↗

DOE OSTI2024

KBase Narrative - Lachnospiraceae sp. C1.1 genome

Narratives for The phenotype and genotype of fermentative prokaryotes This is the Narrative for Porphyromonadaceae sp. W3.11. A complementary Narrative for Lachnospiraceae sp. C1.1 is available here. This is the Narrative for Lachnospiraceae sp. C1.1. A complementary Narrative for Porphyromonadaceae sp. W3.11 is available here. Background and Isolation This Narrative and its complementary Narrative contain assembly and annotation of two bacterial isolates that were isolated by our laboratory from the rumen of a Holstein heifer. All procedures with animals have been approved by University of California Davis’s Institutional Animal Care and Use Committee. Rumen contents were collected through a rumen fistula and strained through two layers of cheesecloth into a bottle. The bottle was sealed to exclude air and maintained at 39°C. Contents were brought to the laboratory and bubbled under O2-free CO2 within 15 min. At the laboratory, serial dilutions were made with anaerobic dilution solution for Lachnospiraceae sp. C1.1 and propionibacterium diluent for Porphyromonadaceae sp. W3.11 (table S2). Aliquots (0.1 ml) of each dilution were injected into anaerobic bottle plates (1) containing 9 ml of LH medium (table S2). After incubation at 37°C for 7 days, isolated colonies were picked. Lachnospiraceae sp. C1.1 was picked from a bottle inoculated with a 104 dilution of rumen contents, and Porphyromonadaceae sp. W3.11 was picked from a bottle inoculated with a 103 dilution. After initial isolation, these organisms were purified by growing on anaerobic roll tubes (2) and picking isolated colonies. We performed de novo sequencing of Lachnospiraceae sp. C1.1 and Porphyromonadaceae sp. W3.11. Aliquots of liquid culture (9 and 1.5 ml, respectively) were collected by syringe and centrifuged (21,000g for 10 min at 4°C). Cell pellets were submitted to Molecular Research LP for DNA extraction, library preparation, and sequencing. After resuspending pellets in 180 µl of ATL buffer (Qiagen), DNA was extracted using the MagAttract HMW DNA Kit (Qiagen). DNA was eluted in 100 µl of AE buffer (Qiagen) and then cleaned using the DNEasy PowerClean Pro Cleanup Kit (Qiagen). DNA was then sheared using the Covaris g-TUBE (Covaris). Sequencing libraries were prepared using the SMRTbell Express Template Prep Kit 2.0 (Pacific Biosciences) and 1500 ng of the sheared and purified DNA. The SMRTbell libraries were size-selected (>6 Kb) using a BluePippin instrument (Sage Science) and 0.75% agarose gel. Libraries were then sequenced using the PacBio Sequel II (Pacific Biosciences) platform and a 30-hour movie time. Narrative Summary In these Narratives, we filtered low-quality reads using Trimmomatic (v0.36), assembled filtered reads with SPAdes (v3.15.3), and then checked completeness and contamination of the assembled genomes with CheckM (v1.0.18). Statistics for sequencing and assembly are in table S3. Using the assembled contigs (genomes), we called genes and annotated them. Protein-coding genes were called using Prodigal (v2.6.3) (3) locally or using KBase via RASTtk (v1.073), with identical results. Genes were annotated with KO IDs using KAAS (4). They were further annotated with pfam and TIGRFAM IDs using KBase and the Annotate Domains in a Genome app. We classified putative genes for hydrogenases using HydDB. Genes for 16S ribosomal RNA (rRNA) were called using RASTtk (v1.073) in KBase. The contigs (genomes) were analyzed to determine whether they belonged to new species. Taxonomy was assigned using GTDB-Tk (v1.7.0) in KBase. The identity of 16S rRNA genes to other organisms was found using EzBioCloud (5). Values of digital DNA-DNA hybridization (dDDH) were found with Type (Strain) Genome Server (6). These analyses suggest that Lachnospiraceae sp. C1.1 and Porphyromonadaceae sp. W3.11 represent novel species or genera. GTDB-Tk assigned Lachnospiracae sp. C1.1 to family Lachnospiraceae and genus NK4A144, which contains no type strains. It assigned Porphyromonadaceae sp. W3.11 to Porphyromonadaceae and genus Porphyromonas_A. Values of 16S rRNA identity and dDDH with respect to type strains were low (table S4). Although more phenotypic data are needed, available evidence supports assignment of genomes to new species or genera. Related publication Hackmann TJ, Zhang B. The phenotype and genotype of fermentative prokaryotes. Sci Adv. 2023 Sep 29;9(39):eadg8687. doi: 10.1126/sciadv.adg8687. Epub 2023 Sep 27. PMID: 37756392; PMCID: PMC10530074.

Hackmann, Timothy↗

DOE OSTI2024

Generic and ML Workloads in an HPC Datacenter: Node Energy, Job Failures, and Node-Job Analysis

HPC datacenters offer a backbone to the modern digital society. Increasingly, they run Machine Learning (ML) jobs next to generic, compute-intensive workloads, supporting science, business, and other decision-making processes. However, understanding how ML jobs impact the operation of HPC datacenters, relative to generic jobs, remains desirable but understudied. In this work, we leverage long-term operational data, collected from a national-scale production HPC datacenter, and statistically compare how ML and generic jobs can impact the performance, failures, resource utilization, and energy consumption of HPC datacenters. Our study provides key insights, e.g., ML-related power usage causes GPU nodes to run into temperature limitations, median/mean runtime and failure rates are higher for ML jobs than for generic jobs, both ML and generic jobs exhibit highly variable arrival processes and resource demands, significant amounts of energy are spent on unsuccessfully terminating jobs, and concurrent jobs tend to terminate in the same state. We open-source our cleaned-up data traces on Zenodo (https://doi. org/10.5281/zenodo.13685426), and provide our analysis toolkit as software hosted on GitHub (https://github.com/atlarge-research/2024-icpads-hpc-workload-characterization). This study offers multiple benefits for data center administrators, who can improve operational efficiency, and for researchers, who can further improve system designs, scheduling techniques, etc.

crossanalysis↗

DOE OSTI2021

Minimizing Cr-Evaporation from Balance of Plant Components by Utilizing Cost-Effective Alumina-Forming Austenitic Steels

A solid oxide fuel cell (SOFC) is a clean and efficient energy conversion device. The development of intermediate-temperature SOFCs has made it preferable to use metallic interconnects (MICs) to greatly reduce the cost and significantly increase the efficiency compared to ceramic interconnect materials. However, gaseous chromium species will evaporate from the chromium-containing layer formed on the surface of commonly used MICs and balance of plant (BoP) components. Volatile chromium species have been shown to form solid deposits which poison the cathodes of SOFCs, causing drastic cell performance degradation and thereby limiting commercialization. In order to alleviate the Cr poisoning and achieve long-term high performance of SOFC stacks, various Al2O3-forming austenitic (AFA) stainless steels applied at different temperatures are evaluated in this project. Based on our Phase I results (500 h operation), it is shown that on the AFAs, an alumina-based protective layer forms under high temperature that is invulnerable to water vapor effects and suppresses the diffusion of chromium and manganese which can prevent the generation of spinels on the alloy surface. Therefore, 310S, OC4 and OC5 at 800 °C and 625, OC11 and OC11LZ at 900 °C are selected to be tested in the Phase II long-term operation. From the results, we find that besides the lower Cr evaporation rates and better oxidation resistance of AFAs than benchmark alloys after short-term (500 h) operation, AFAs also possess the sturdy and compact alumina layer after a long-term operation (5000 h). A protective oxide layer is of great importance for the long-term high-temperature operation of structural materials. The high-temperature oxidation behavior of AFAs and commercial 310S and 625 alloys in Air + 10% H 2 O at 800 °C and 900 °C is systematically investigated. Severe breakaway oxidation and minor spallation are observed for the 310S and 625 after the long-term operation, while the AFAs show high oxidation resistance. It is found that the formation of a continuous alumina layer could greatly prevent the volatilization of chromium vapors. In addition, the corresponding evolving models are discussed. Chromium evaporation from BoP components in high-temperature environment could severely deteriorate the electrochemical performance of SOFC. Several methods were applied to evaluate the Cr evaporation rates of BoP after 500 h exposure at 800 °C to 900 °C in air with 10% H 2 O. An optimal method was designed to exclude the effect of silicon (Si) deposits from quartz tube and sodium (Na) deposits from the sodium carbonate on the oxidation process and the chemical interaction between Cr gaseous species and alumina tube which could provide further quantitative correlation of the evaporated Cr species quantities and degradation rates of SOFC. Based on the great performance of AFAs after long-term operation, AFAs are assembled with Anode-supported cells (ASC) to investigate the the Cr deposition of anode-supported cell under a constant current density of 0.5 A cm -2 at 800 °C with AFA alloys compared with commercial alloys. In addition, the anodic and cathodic processes are deconvoluted by distribution of relaxation times (DRT) method which are comprehensively discussed. It is found out that the voltage exhibited a slight decrease of 5.09 % and 1.54 % in the presence of OC11 and OC11LZA alloy, respectively. However, a considerable decrease of 22.14 % and 12.06 % was determined in the presence of 310S and 625 alloy, respectively. AFAs possessing the low-cost, low Cr evaporation rates and the high oxidation resistance will make it of great potential to replace the existing BoP components.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Modeling of H2 Dispersion at ARIES

Hydrogen is a versatile and clean energy carrier that can be produced from various renewable sources such as wind, solar, and hydropower and help decarbonize electricity grids, industry, and transportation. Using the Hydrogen Research Facility under Advanced Research on Integrated Energy Systems (ARIES) at the National Renewable Energy Laboratory's (NREL) Flatirons campus as a test bench, the study examines the feasibility, useability, and value of using computational fluid dynamics (CFD) techniques to model hydrogen dispersion. The ARIES facility was chosen because controlled hydrogen releases can be performed at a rate of 27 kg-H2/hr. Site-specific atmospheric and weather condition data such as wind speed and temperature were used as inputs to the model. The results show statistical distributions and ranges of hydrogen concentrations at locations throughout the domain. Wind conditions are found to significantly impact the release behavior, including the hydrogen cloud's direction and concentrations. At low wind speeds (below 1 mph), hydrogen forms a cloud and at higher wind speeds (> 2-4 mph) hydrogen plume stretches in the direction of wind momentum. From >100 simulations for ARIES site-specific conditions, statistical quantities combined with a clustering algorithm were used to propose sensor location at various elevations from ground.

dispersion↗

DOE OSTI2019

Expanded Use of ISOCS Characterization Techniques for WIPP Certification at the Idaho Clean-up Project - 19623

The Advanced Mixed Waste Treatment Project (AMWTP) has been retrieving, treating, characterizing, and shipping legacy Transuranic (TRU) waste for disposal since 2003 as part of the overall Idaho Cleanup Project (ICP) in support of the US Department of Energy. As the ICP has progressed, over 700 containers have been identified that cannot be successfully assayed using the current suite of non-destructive assay (NDA) instruments. To meet this challenge, Fluor Idaho, LLC, and Mirion Technologies (formerly Canberra Industries) have teamed to deploy the In-Situ Object Counting System (ISOCS) to supplement the current NDA capabilities. ISOCS has long been used in various radioactive waste management applications, but never has the ISOCS ability to perform intrinsic efficiency modeling of discrete waste containers been employed to characterize and certify TRU waste for disposal at the Waste Isolation Pilot Plant (WIPP), near Carlsbad, New Mexico. Since the primary disposal facility for this waste is the WIPP, the characterization processes for determining the quantity of radioactive material entrained in the waste are subject to WIPP Waste Acceptance Criteria (WAC) quality requirements and associated performance criteria. Until now, the Carlsbad Field Office (CBFO) WIPP-certified NDA equipment has utilized pre-defined efficiency calibrations for fixed geometries. However, due to the radioactive material content, activity levels, waste stream matrix, and/or the geometries of various size drums, boxes and other-odd-shaped containers or container integrity issues, it may not be suitable to characterize these containers with any of the existing WIPP-certified NDA equipment located at the AMWTP. Therefore, advanced technologies are needed to complete characterization of these problematic waste containers. The July 5, 2016 release of the WIPP WAC, DOE/WIPP-02-3122, Revision 8.0, Appendix A, 'Radioassay Requirements for Transuranic Waste,' was expanded to include several newer concepts such as American Society for Testing and Materials (ASTM) approved methods for efficiency-based calibrations and the use of mathematical computer modeling techniques for calibration. This change prompted AMWTP to pursue obtaining WIPP certification authority for expanded ISOCS techniques to deal with the remaining challenging waste containers and the development and implementation of Mirion's Figures of Merit (FOM) evaluations. These vital FOM evaluations enhance the ISOCS's modeling capabilities by optimizing the dynamic efficiency calibration for each object and reducing the assay's Total Measurement Uncertainty (TMU) budget. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗