Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “binary alloys”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Impact of Molten Gallium on the Microstructure and Corrosion Behavior of Aluminum and Uranium-Aluminum Alloys for Used Nuclear Fuel Reprocessing

Test reactors around the world utilize highly enriched uranium fuel to achieve high neutron fluxes for materials testing. Once spent, the remaining uranium is a valuable resource for subsequent fuel fabrication. However, some of these test reactor cores consist of curved plate-type fuel elements, fabricated using aluminum alloy 6061 (AA6061) cladding to encapsulate a uranium-aluminum alloy (UAlx) fuel matrix. These assemblies require non-standard reprocessing approaches for uranium recovery, as aluminum dissolves readily in acidic solutions, generating large volumes of waste and complicating downstream chemical separations. In this work, we investigate a novel chemical decladding strategy based on the interaction between AA6061/UAlx and molten gallium (Ga). Ga is known to induce severe degradation of aluminum metal through liquid metal embrittlement (LME), even at relatively low Ga concentrations. By penetrating the aluminum crystal lattice, Ga disrupts grain cohesion and facilitates fracture or dissolution of the aluminum matrix. Thermodynamic analysis of the Al–Ga binary phase diagram suggests that Ga may offer a viable pathway to selectively weaken or dissolve the AA6061 cladding, and potentially the aluminum component of the UAlx fuel matrix within. To this end, parametric experiments were performed at 50 °C and 100 °C across a range of Al–Ga atomic fractions. At lower Al fractions, the AA6061 was completely molten after 2 hours of exposure to the Ga metal. In contrast, samples with higher Al fractions (0.9 Al, 0.1 Ga) contained residual solids after 2 hours, which were characterized by microstructural examination using electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). These Al-Ga compositions were also evaluated using FactSage thermodynamic modeling to further elucidate the relationship between phase diagram behavior and LME.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Programmable Synthesis of Multimetallic Phosphide Nanorods Mediated by Core/Shell Structure Formation and Conversion

Generalized synthetic strategies for nanostructures with well-defined physical dimensions and broad-range chemical compositions are at the frontier of advanced nanomaterials design, functionalization, and application. In this paper, we report a composition-programmable synthesis of multimetallic phosphide CoMP x nanorods (NRs) wherein M can be controlled to be Fe, Ni, Mn, Cu, and their binary combinations. Forming Co 2 P/MP x core/shell NRs and subsequently converting them into CoMP x solid-solution NRs through thermal post-treatment are essential to overcome the obstacle of morphology/structure inconsistency faced in conventional synthesis of CoMP x with the different M compositions. The resultant CoMP x with uniform one-dimensional (1-D) structure provides us a platform to unambiguously screen the M synergistic effects in improving the electrocatalytic activity, as exemplified by the oxygen evolution reaction. This new approach mediated by core/shell nanostructure formation and conversion can be extended to other multicomponent nanocrystal systems (metal alloy, mixed oxide, and chalcogenide, etc.) for diverse applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Polyamorphism in a solute-lean Al–Ce metallic glass

Polyamorphism discovered in lanthanide-rich metallic glasses (MGs) has been attributed to the electronic transition of the lanthanide element as a solvent element. In this work, we report that pressure-induced polyamorphism still exists in a Ce-poor Al 93 Ce 7 binary MG where the 4f electron element serves as a solute and solute–solute avoidance is expected. The polyamorphic transition, observed by in situ high-pressure synchrotron x-ray diffraction, is accompanied by a volume collapse of ~0.78% and occurs over a narrow pressure range from ~0.8 to ~1.8 GPa. Further synchrotron Ce L 3 -edge x-ray absorption spectroscopy measurements reveal that pressure-induced 4f electron delocalization underlies the polyamorphic transition. Molecular dynamics simulations confirm that the Ce atoms in the MG are completely isolated by the solvent Al atoms. This result demonstrates that 4f element-bearing alloys with extremely dilute concentrations can also exhibit polyamorphic states originating from electronic transitions, extending the compositional space of polyamorphism of MGs into very dilute regions. Our work suggests that tunable properties under compressive stress could be achieved in MGs by even minor doping of elements prone to electronic transitions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High‐Throughput Evaluation of Hardening Coefficients of Eight Alloying Elements in Magnesium

Liquid–solid diffusion couples (LSDCs) are employed to generate a composition gradient in the single‐phase hexagonal closed‐packed (hcp) solid solution with compositions up to the solubility limit of various solutes in Mg. Nanoindentation scanning across the composition gradient in LSDCs allows effective evaluation of composition‐dependent hardness of eight alloying elements (Al, Ca, Ce, Gd, Li, Sn, Y, and Zn) in the hcp Mg phase. The hardening coefficients, an indicator of the potency of solid‐solution hardening, are evaluated from the measured composition‐hardness data and correlated with various materials properties such as atomic radius, shear modulus, and elastic modulus of the solutes. The rank of hardening potency of Al, Gd, Sn, Y, and Zn measured by nanoindentation is in good agreement with that measured by microindentation reported in the literature. The hardening coefficient (potency) from the strongest to the weakest is Ce > Ca > Y ≈ Gd > Zn > Al ≈ Sn > Li in Mg‐based hcp binary solid solutions. The hardening coefficient is found to be closely correlated with the strengthening potency.

36 MATERIALS SCIENCE↗
NASA NTRS1995

Dynamic Instability of Solidification Fronts and Formation of Transverse Layered Structures

A plane front of crystallization in a unidirectional process of solidification of a binary melt or a solution is shown to be unstable with respect to virtual perturbations of the front velocity within some region of physical and operating parameters. This dynamic instability has nothing in common with morphological instability of the front also possible under certain conditions. It gives rise to the origination of a self-oscillating regime of solidification. The oscillations of the front velocity are accompanied by oscillations of other relevant variables, such as the melt concentration and temperature at the front. What is most important is that this provides for a natural explanation of phenomena of the formation of ordered striations commonly observed when producing alloys and withdrawing crystals. A theory of nonlinear instability of the solidification front is developed which also allows for properties of both self-oscillating regimes of solidification and transverse layered structures it allows to be described in an explicit form, without introducing any additional hypotheses and empirical parameters. Apart from other things, the properties are strongly dependent on convective transport originated in consequence of a difference between the densities of the liquid melt and solid alloy. The theory results in a remarkably good agreement with experimental evidence on crystal withdrawal obtained in normal gravity and under space flight conditions. The problem of interplay between modes of the dynamic and morphological types of instability is also discussed. There are parametric regions in which either only one of these types occurs or both of them arise simultaneously.

Buyevich, Yu A.↗
NASA NTRS2005

Calculated X-ray Intensities Using Monte Carlo Algorithms: A Comparison to Experimental EPMA Data

Monte Carlo (MC) modeling has been used extensively to simulate electron scattering and x-ray emission from complex geometries. Here are presented comparisons between MC results and experimental electron-probe microanalysis (EPMA) measurements as well as phi(rhoz) correction algorithms. Experimental EPMA measurements made on NIST SRM 481 (AgAu) and 482 (CuAu) alloys, at a range of accelerating potential and instrument take-off angles, represent a formal microanalysis data set that has been widely used to develop phi(rhoz) correction algorithms. X-ray intensity data produced by MC simulations represents an independent test of both experimental and phi(rhoz) correction algorithms. The alpha-factor method has previously been used to evaluate systematic errors in the analysis of semiconductor and silicate minerals, and is used here to compare the accuracy of experimental and MC-calculated x-ray data. X-ray intensities calculated by MC are used to generate a-factors using the certificated compositions in the CuAu binary relative to pure Cu and Au standards. MC simulations are obtained using the NIST, WinCasino, and WinXray algorithms; derived x-ray intensities have a built-in atomic number correction, and are further corrected for absorption and characteristic fluorescence using the PAP phi(rhoz) correction algorithm. The Penelope code additionally simulates both characteristic and continuum x-ray fluorescence and thus requires no further correction for use in calculating alpha-factors.

Carpenter, P. K.↗
DOE OSTI2021

Exploring the physics of cesium lead halide perovskite quantum dots via Bayesian inference of the photoluminescence spectra in automated experiment

The unique optoelectronic properties of metal halide perovskite quantum dots (QDs) make them promising candidates for applications in light-emitting diodes (LEDs), scintillators, and other photonic devices. The automated micropipetting synthesis platform equipped with an optical reader enables the opportunity for high throughput synthesis and photoluminescent (PL) characterization of metal halide perovskite QDs for the first time. Here, we explore the compositional dependence of the PL behavior and stability of the combinatorial library of cesium lead halide (CsPbX 3 ) perovskites QDs via the automated platform. To study the stability of synthesized QDs in the binary and ternary configurations, we study the time-dependent PL properties using previously developed machine learning analysis. Additionally, to systematically explore the PL behavior in the ternary CsPbX 3 QDs system, we introduce the Bayesian inference framework that allows the probabilistic fit of multiple models to the PL data and establishes both optimal model and model parameter robustly. Furthermore, these behaviors can be used as a control parameter for the navigation of the multidimensional compositional spaces in automated synthesis. Furthermore, this analysis shows the nonuniformity of the PL peak behavior in the ternary CsPbX 3 QDs system. Further, the analysis confirms narrow size distribution and good quality of CsPbBr 3 QDs alloyed with low concentrations of iodide and chloride. We note that Bayesian Inference fit parameters can be further used as a control signal for navigation of the chemical spaces in automated synthesis.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The Novel Hybrid Ab Initio Model of High-Performance Structural Alloys Design for Fossil Energy Power Plants

The current project developed a novel HT-CALPHAD/DFT approach, which can quickly design new high-performance structural alloys for the application of FE power plants. The PI will mainly take charge of high-throughput DFT simulations and computational thermodynamics of the selected multicomponent alloy systems for the FE power plant applications. At the end of the project, a novel hybrid model based on high throughput CALPHAD/DFT simulations and computational thermodynamics will be developed to provide guidance on how to identify multi-component new high-performance structural alloys with much less computational effort needed. It will address the extensive computation time needed for DFT on the new alloys design. In addition, it will also address the well-known headache of DFT, i.e. how to make the accurate prediction of the high-temperature equilibria. The novel hybrid model the PI proposed will not only be applied to the design of high-performance structural alloys in FE power plants but in many different applications, such as nuclear reactors. This hybrid modeling approach includes four sections: 1) HT-CALPHAD modeling of Al-Co-Cr-Ni-Fe system with FCC and BCC phase. In this section, 3561 non-equiatomic compositions were randomly generated in order to investigate the phase stability of single FCC and BCC phases. Meanwhile, we proposed a data screening procedure to screen out the good candidates within these compositions, considering the temperature range, average density, and melting temperature, etc. 2) Investigation of FCC-Cr lattice stability in Fe-Cr system. We systematically assessed the reliability of FCC-Cr lattice stability derived by DFT and CALPHAD approaches. Meanwhile, the Fe-Cr binary system was chosen as a case study to verify the Cr lattice stability obtained by both approaches. 3) High-throughput DFT modeling on elastic properties of Al-Co-Cr-Ni-Fe systems. We predicted and established the FCC quinary elastic constant database of the Al-Co-Cr-Fe-Ni systems at 0K by using special quasi-random structure (SQS) approach. The predictions will start with pure elements of Al-Co-Cr-Fe-Ni system and will be continued with binaries, ternaries, quaternaries, and finally the quinary compositions. 3) Modeling of temperature-dependent elastic properties in Al-Co-Cr-Ni-Fe systems. In this part, we predict the thermal expansion coefficient and elastic stiffness coefficient as a function of temperature by applying quasiharmonic approximation. With this approach, the elastic properties of HEAs at elevate temperature can be estimated.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS1972

The effect of phosphorus on the formation of the Widmanstaetten pattern in iron meteorites.

Use of a combination of a revised Fe-Ni-P phase diagram and laboratory cooling experiments on Fe-Ni-P alloys to determine the effect of P on the formation of the Widmanstaetten pattern. From the phase diagram results, two reaction paths were found for the formation of kamacite (1) gamma (taenite) yields alpha (kamacite) + gamma (taenite) and (2) gamma yields gamma + Ph /phosphide, (FeNi)3P/ yields alpha + gamma + Ph. The reaction path gamma yields alpha + gamma is preferred at low P contents, while at higher P contents and at Ni contents greater than 7.0 wt.%, the reaction path gamma yields gamma + Ph yields alpha + gamma + Ph controls the formation of kamacite. Above 7 wt.% Ni, the effect of P on the equilibrium nucleation temperature of kamacite is quite small, less than about plus or minus 30 C with respect to the Fe-Ni binary diagram. The addition of P (greater than 0.1 wt.%) to meteorites promotes nucleation of kamacite at higher temperatures and effectively lowers the amount of undercooling necessary to nucleate kamacite homogeneously. Ni has just the opposite effect, decreasing the temperature of nucleation and increasing the amount of undercooling. It is concluded that significant amounts of undercooling, 50 to 100 C, are necessary for the nucleation of the Widmanstaetten structure in meteorites, and that chemical equilibrium is maintained in the various phases of slowly cooled iron meteorites to 650 C and probably to 600 C.

Goldstein, J. I.↗
DOE OSTI2022

On the Phase with an Unreported Ternary Composition Found in the P-Pt-Rh System

This work reports a ternary structure in the P-Pt-Rh system, which has a composition not reported in the literature. The structure formed in the Pt-6 wt.% Rh alloy which was partially melted in a P-enriched CO environment near 1000 °C isothermally and non-isothermally as part of the type B thermocouple assembly. A composition and a crystal structure of this phase were investigated by utilizing SEM, EPMA, XRD and TEM techniques to discuss the potential of this structure being a true ternary phase. The EPMA indicated chemistries of the ternary structure from both isothermal and non-isothermal samples were about 23P-52Pt-25Rh (at.%) and, 22P-54Pt-24Rh (at.%) respectively. TEM diffraction patterns identified this ternary structure to be crystalline with a complex non-cubic structure, and confirmed it was not amorphous. Finally, by superimposing the compositions in the ternary phase diagram, it was concluded this phase was not extensions of any binary phases known in the respective binary systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Determining Multi-Component Phase Diagrams with Desired Characteristics Using Active Learning

Herein, we demonstrate how to predict and experimentally validate phase diagrams for multi-component systems from a high-dimensional virtual space of all possible phase diagrams involving several elements based on small existing experimental data. The experimental data for bulk phases for known systems represents a sampling from this space, and screening the space allows multi-component phase diagrams with given design criteria to be built. This approach uses machine learning methods to predict phase diagrams and Bayesian experimental design to minimize experiments for refinement and validation, all within an active learning loop. The approach is proven by predicting and synthesizing the ferroelectric ceramic system (1-ω)(Ba 0.61 Ca 0.28 Sr 0.11 TiO 3 )-ω(BaTi 0.888 Zr 0.0616 Sn 0.0028 Hf 0.0476 O 3 ) with a relatively high transition temperature and triple point, as well as the NiTi-based pseudo-binary phase diagram (1-ω)(Ti 0.309 Ni 0.485 Hf 0.20 Zr 0.006 )-ω(Ti 0.309 Ni 0.485 Hf 0.07 Zr 0.068 Nb 0.068 ) designed for high transition temperature (ω ≤ 1). Each phase diagram is validated and optimized through only three new experiments. The complexity of these compounds is beyond the reach of today’s computational methods.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Deformation-enhanced hierarchical multiscale structure heterogeneity in a Pd-Si bulk metallic glass

Here, the multiscale structures in a Pd 82 Si 18 binary bulk metallic glass before and after deformation were studied using electron microscopies, high-energy synchrotron X-ray diffraction, and small-angle scattering techniques. The experimental results revealed an enhancement of hierarchical structure heterogeneities on multiple length scales after deformation. Hierarchical multiple shear bands of high number density were observed after bending, introducing complex but periodically distributed residual strain. Pair distribution function analysis revealed that the connectivity of the short-range clusters on the medium-range scale determines the packing density difference between the tension side and the compression side in the sample after bending. In-situ synchrotron X-ray diffraction study also revealed a transformation of connection modes among short-range clusters under uniaxial tension and compression, which is consistent with those of triaxial tension/compression parts upon bending in Pd 82 Si 18 glassy alloys. The nanoscale heterogeneities for metallic glasses after deformation observed by small-angle scattering and transmission electron microscopy may be attributed to the nanoscale amorphous phase separation and interacting multiple shear bands enhanced by plastic deformation. Our findings suggested that the enhancement of hierarchical heterogeneous structure on multiple length scales may explain the excellent plasticity of Pd-Si glassy alloys, deepening the understanding of structure-property relation during plastic deformation in metallic glasses.

36 MATERIALS SCIENCE↗
NASA NTRS2015

Filled Co (sub X) Ni (sub 4-x) Sb (sub 12-y) Sn (sub Y) Skutterudites: Processing and Thermoelectric Properties

Skutterudites have proven to be a useful thermoelectric system as a result of their enhanced figure of merit (ZT1), cheap material cost, favorable mechanical properties, and good thermal stability. The majority of skutterudite interest in recent years has been focused on binary skutterudites like CoSb3 or CoAs3. Binary skutterudites are often double and triple filled, with a range of elements from the lanthanide series, in order to reduce the lattice component of thermal conductivity. Ternary and quaternary skutterudites, such as Co4Ge6Se6 or Ni4Sb8Sn4, provide additional paths to tune the electronic structure. The thermal conductivity can further be improved in these complex skutterudites by the introduction of fillers. The Co (sub X) Ni (sub 4-x) Sb (sub 12-y) Sn (sub Y) system has been investigated as both a p- and n-type thermoelectric material, and is stable up to 200 degrees Centigrade. Yb, Ce, and Dy fillers have been introduced into the skutterudite to study the influence of both the type and the quantity of fillers on processing conditions and thermoelectric properties. The system was processed through a multi-step technique that includes solidification, mechano-chemical alloying, and hot pressing which will be discussed along with thermoelectric transport properties.

Thermoelectricity↗
DOE OSTI2020

Microstructural characterization of phase-separated co-deposited Cu–Ta immiscible alloy thin films

Elevated temperature co-sputtering of immiscible elements ends in a variety of self-organized morphologies due to phase separation. Cu–Ta is used as a model system to understand the evolution of phase-separated microstructural morphologies by co-sputtering thin films with nominal 50–50 at.% composition at four temperatures: 25, 400, 600, and 800 °C. Scanning/transmission electron microscopy of the film cross sections showed the microstructure morphology varied from nanocrystalline Cu–Ta at 25 °C to a wavy ribbon-like structure at 400 °C, to Cu-rich agglomerates surrounded by Ta-rich veins at 600 and 800 °C. In the agglomerate-vein morphology, microstructural features were present on two length scales, from a few nanometers to a few tens of nanometers, thus making the structures hierarchical. On the nanoscale, the Cu-rich agglomerates contained Ta precipitates, whereas the Ta-rich veins had embedded Cu nanocrystals. The various microstructures can be attributed to the highly disparate constituent element interdiffusion at the deposition temperatures with the Cu having orders of magnitude higher mobility than Ta at the deposition temperatures. This research of processing–microstructure relationship will be useful in guiding the design of hierarchical multiphase microstructures in binary or multicomponent thin films with tailored mechanical properties.

36 MATERIALS SCIENCE↗
NASA NTRS2004

NASA Tech Briefs, May 2004

Topics include: Embedded Heaters for Joining or Separating Plastic Parts; Curing Composite Materials Using Lower-Energy Electron Beams; Aluminum-Alloy-Matrix/Alumina-Reinforcement Composites; Fibrous-Ceramic/Aerogel Composite Insulating Tiles; Urethane/Silicone Adhesives for Bonding Flexing Metal Parts; Scalable Architecture for Multihop Wireless ad Hoc Networks; Improved Thermoplastic/Iron-Particle Transformer Cores; Cooperative Lander-Surface/Aerial Microflyer Missions for Mars Exploration Dual-Frequency Airborne Scanning Rain Radar Antenna System Eight-Channel Continuous Timer Reduction of Phase Ambiguity in an Offset-QPSK Receiver Ambient-Light-Canceling Camera Using Subtraction of Frames Lightweight, Flexible, Thin, Integrated Solar-Power Packs Windows(Registered Trademark)-Based Software Models Cyclic Oxidation Behavior Software for Analyzing Sequences of Flow-Related Images Improved Ball-and-Socket Docking Mechanism Two-Stage Solenoid Ordered Nanostructures Made Using Chaperonin Polypeptides Low-Temperature Plasma Functionalization of Carbon Nanotubes Improved Cryostat for Cooling a Wide Panel Current Pulses Momentarily Enhance Thermoelectric Cooling Hand-Held Color Meters Based on Interference Filters Calculating Mass Diffusion in High-Pressure Binary Fluids Fresnel Lenses for Wide-Aperture Optical Receivers Increasing Accuracy in Computed Inviscid Boundary Conditions Higher-Order Finite Elements for Computing Thermal Radiation Radar for Monitoring Hurricanes from Geostationary Orbit Time-Transfer System for Two Orbiting Spacecraft

Source record↗
NASA NTRSDate not supplied

Towards Accurate Predictions of Martensitic Transition Temperatures for Shape Memory Alloys from Ab Initio Simulations

Experimentally, NiTi undergoes a single martensitic phase transition around 341 K from the lowtemperature (T) monoclinic B19’ phase (P21/m) to the high-temperature cubic B2 phase (Pm3m). Theoretically, an orthorhombic B33 (Cmcm) has also been proposed as the T=0 ground state structure, although this phase has never been observed. Accurate predictions of martensitic transition temperatures (MTT) have remained elusive in part due to several well-known theoretical complexities of these systems including low temperature instabilities of the B2 phase. Recently, we proposed a rigorous thermodynamic integration approach based on ab initio simulations to resolve many of these difficulties [1,2]. However, an unsatisfying overprediction of the MTT relative to experiment (by ~100 K) means a fully quantitative theory is still lacking. In this work, we report several new developments to our method that bring first principles theory and experiment much closer into agreement. Our calculations indicate that phonon free energies at low temperature stabilizes B19’ over B33, rationalizing B19’ as the ground state down to T=0. We also find that accurate computations of the electronic free energy, i.e. the change in energy and the appearance of electronic configurational entropy due to finite temperature, is crucial to obtain accurate MTT. Incorporating these corrections results in an MTT prediction of 365 K for binary NiTi, which is in very close agreement with experiment. Our theoretical approach is expected to be a broadly applicable and predictive theory for MTT of SMAs.

Zhigang Wu↗
NASA NTRS2007

A Synopsis of Interfacial Phenomena in Lithium-Based Polymer Electrolyte Electrochemical Cells

The interfacial regions between electrode materials, electrolytes and other cell components play key roles in the overall performance of lithium-based batteries. For cell chemistries employing lithium metal, lithium alloy or carbonaceous materials (i.e., lithium-ion cells) as anode materials, a "solid electrolyte interphase" (SEI) layer forms at the anode/electrolyte interface, and the properties of this "passivating" layer significantly affect the practical cell/battery quality and performance. A thin, ionically-conducting SEI on the electrode surface can beneficially reduce or eliminate undesirable side reactions between the electrode and the electrolyte, which can result in a degradation in cell performance. The properties and phenomena attributable to the interfacial regions existing at both anode and cathode surfaces can be characterized to a large extent by electrochemical impedance spectroscopy (EIS) and related techniques. The intention of the review herewith is to support the future development of lithium-based polymer electrolytes by providing a synopsis of interfacial phenomena that is associated with cell chemistries employing either lithium metal or carbonaceous "composite" electrode structures which are interfaced with polymer electrolytes (i.e., "solvent-free" as well as "plasticized" polymer-binary salt complexes and single ion-conducting polyelectrolytes). Potential approaches to overcoming poor cell performance attributable to interfacial effects are discussed.

Baldwin, Richard S.↗
NASA NTRS1993

Crystal growth of ZnSe and related ternary compound semiconductors by physical vapor transport

The materials to be investigated are ZnSe and related ternary semiconducting alloys (e.g., ZnS(x)Se(1-x), ZnTe(x)Se(1-x), and Zn(1-x)Cd(x)Se). These materials are useful for opto-electronic applications such as high efficient light emitting diodes and low power threshold and high temperature lasers in the blue-green region of the visible spectrum. The recent demonstration of its optical bistable properties also makes ZnSe a possible candidate material for digital optical computers. The investigation consists of an extensive ground-based study followed by flight experimentation, and involves both experimental and theoretical work. The objectives of the ground-based work are to establish the characteristics of the crystals grown on Earth as a basis for subsequent comparative evaluations of the crystals grown in a low gravity environment and to obtain the experimental data and perform the analyses required to define the optimum parameters for the flight experiments. During the six months of the Preliminary Definition Phase, the research efforts were concentrated on the binary compound ZnSe - the purification of starting materials of Se by zone refining, the synthesis of ZnSe starting materials, the heat treatments of the starting materials, the vapor transport rate measurements, the vapor partial pressure measurements of ZnSe, the crystal growth of ZnSe by physical vapor transport, and various characterization on the grown ZnSe crystals.

Su, Ching-Hua↗