Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “alignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Alignment of Au nanorods along de novo designed protein nanofibers studied with automated image analysis

In this paper, we focus on exploring the directional assembly of anisotropic Au nanorods along de novo designed 1D protein nanofiber templates. Using machine learning and automated image processing, we analyze scanning electron microscopy (SEM) images to study how the attachment density and alignment fidelity are influenced by variables such as the aspect ratio of the Au nanorods, and the salt concentration of the solution. We find that the Au nanorods prefer to align parallel to the protein nanofibers. This preference decreases with increasing salt concentration, but is only weakly sensitive to the nanorod aspect ratio. While the overall specific Au nanorod attachment density to the protein fibers increases with increasing solution ionic strength, this increase is dominated primarily by non-specific binding to the substrate background, and we find that greater specific attachment (nanorods attached to the nanofiber template as compared to the substrates) occurs at the lower studied salt concentrations, with the maximum ratio of specific to non-specific binding occurring when the protein fiber solutions are prepared in 75 mM NaCl concentration.

36 MATERIALS SCIENCE↗

Improving molecular alignment and charge percolation in semiconducting polymer films with highly localized electronic states through tailored thermal annealing

Here, we have recently developed a strategy to improve charge percolation efficiency in a renowned family of naphthalene-diimide bithiophene (PNDI-T2) copolymers, based on the application of a tailored thermal treatment on pre-aligned films. Here we show that the accurate choice of thermal post-processing temperatures can induce a notable lamellar thickening and an improvement of molecular alignment, the latter being favored by alkyl chains with longer branches. Correspondingly, enhanced transport properties are observed. Interestingly, these are found to be independent of lamellar thickness. In fact, within this family of molecules, characterized by a locked non-planar conformation and strong intramolecular charge localization, the orientational order within charge percolation paths was found to be the only factor dictating charge transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polaron absorption in aligned conjugated polymer films: breakdown of adiabatic treatments and going beyond the conventional mid-gap state model

This study provides the first experimental polarized intermolecular and intramolecular optical absorption components of field-induced polarons in regioregular poly(3-hexylthiophene-2,5-diyl), rr-P3HT, a polymer semiconductor. Highly aligned rr-P3HT thin films were prepared by a high temperature shear-alignment process that orients polymer backbones along the shearing direction. rr-P3HT in-plane molecular orientation was measured by electron diffraction, and out-of-plane orientation was measured through series of synchrotron X-ray scattering techniques. Then, with molecular orientation quantified, polarized charge modulation spectroscopy was used to probe mid-IR polaron absorption in the ℏω = 0.075 — 0.75 eV range and unambiguously assign intermolecular and intramolecular optical absorption components of hole polarons in rr-P3HT. This data represents the first experimental quantification of these polarized components and allowed long-standing theoretical predictions to be compared to experimental results. The experimental data is discrepant with predictions of polaron absorption based on an adiabatic framework that works under the Born–Oppenheimer approximation, but the data is entirely consistent with a more recent nonadiabatic treatment of absorption based on a modified Holstein Hamiltonian. This nonadiabatic treatment was used to show that both intermolecular and intramolecular polaron coherence break down at length scales significantly smaller than estimated structural coherence in either direction. Importantly, this strongly suggests that polaron delocalization is fundamentally limited by energetic disorder in rr-P3HT.

36 MATERIALS SCIENCE↗

Strategies for fabricating aligned nano- and microfiber scaffolds: an overview for cell culture applications

The rapidly growing demand for cell manufacturing and in vitro tissue fabrication has led to the development of various technologies for biomimetic artificial extracellular matrix (ECM), including three major materials: hydrogels, fibrous scaffolds, and decellularized tissues. The latter two materials are closer to the biomimetic goal of replicating natural ECM. The scalability of the scaffolds made of decellularized tissues is limited. The development of 3D fibrous ECM is at the initial stage owing to the recent advantages of novel nanofiber spinning technologies. These novel technologies brought about simultaneous control over a range of critical characteristics, such as fiber diameter, length, material, draw ratio, spacing, and alignment into well-controlled 3D constructs. There is still a long way to go in designing 3D fibrous scaffolds based on cell response studies. The primary objective of this review is to provide an analysis of the recent progress in novel nano- and microfiber spinning methods and uncover their potential for precise fiber alignment into 3D structures.

Peranidze, Kristina [University of Georgia, Athens↗

Electrospinning of ultra-high molecular weight polymers into aligned nanofibers and their application in chemical separations

Ultra-high molecular weight (UHMW, >10 6 g mol −1 ) vinyl polymers are increasingly accessible through photoiniferter polymerization, yet their behavior in electrospinning has received comparatively little attention. Here, we explore the electrospinning of UHMW poly(methyl acrylate), poly(methyl methacrylate), poly(N,N-dimethylacrylamide), and poly(styrene-co-pentafluorostyrene) synthesized by photoiniferter polymerization, with number-average molecular weights (M n ) greater than 1000 kDa and dispersities below 1.4. UHMW polymers form stable Taylor cones and discrete fibers at solution concentrations as low as 0.5 wt% due to their large number of entanglements, a threshold unachievable with low molecular weight (M n = 20–54 kDa) polymers of the same chemistry. Using poly(methyl methacrylate) and poly(styrene-co-pentafluorostyrene) as model systems, we demonstrate that fiber diameter can be tuned from 350 nm to 20 μm through systematic variation of polymer concentration (0.01 to 4 wt%) and flow rate (0.5 to 10 mL h −1 ). Additionally, we find that collector rotation rate governs fiber alignment, with highly aligned mats obtained with drum rotation speeds of 1000 RPM. Reversing the polarity of the electric field during electrospinning reorients the surface chemistry of these fiber mats without altering their microscale morphology, shifting the water contact angle by 7° (89° to 96°) and providing a two-fold binding capacity enhancement in cationic dye uptake. These results show that the high entanglement densities of UHMW vinyl polymers shift the accessible electrospinning window to dilute solutions and that electric-field polarity is a useful lever to control the surface chemistry in the resulting fibers.

Marquez, Joshua D. [University of Florida, Gainesv↗

Time Alignment of the CMS Hadron Calorimeter

The Hadron Calorimeter (HCAL) in the Compact Muon Solenoid (CMS) experiment at the Large Hadron Collider (LHC) was recently upgraded for Run 3 (2022-2025) to introduce depth segmentation and online timing measurements. With increased segmentation and readout channels, the HCAL provides new timing capabilities for jets and hadronic tau decays with nearly 4π coverage and sensitivity to highly displaced decays within the calorimeter volume. Recent HCAL timing scans provide a valuable look at artificially delayed jets in collision data and are crucial to improving the detector’s performance. Online timing is utilized for detector alignment based on positioning the pulse rising edge, achieving an alignment accuracy of 0.5 ns, considerably higher than previous energy-weighting based approaches. Using precision arrival time measurements, significant advances have been made in understanding the propagation of hadronic showers throughout the calorimeter.

Kopp, Gillian [Princeton Univ., NJ (United States)↗

Effect of ion beam irradiation and rubbing on the directional behavior and alignment mechanism of liquid crystals on polyimide surfaces

We investigated the effects of ion beam (IB) irradiation and rubbing on the directional behavior and alignment mechanism of liquid crystals (LCs) on polyimide (PI) surfaces. We found that the LC direction follows the IB irradiation alignment direction on the PI surface regardless of whether the irradiation occurs before or after rubbing. We assumed that the LC direction depends strongly on the C-O bonds created from C=O bonds on the PI surface broken by IB irradiation and conducted an investigation of the chemical bonding state of the PI surface by x-ray photoelectron spectroscopy.

36 MATERIALS SCIENCE↗

Development of an Ion Beam Irradiation System for Liquid Crystal Alignment Layer Production

Ion beam irradiation was employed to produce alignment layers for liquid crystal (LC) displays. The alignment characteristics were compared with those by the conventional rubbing method. Ion incident angle to the films played an important role in LC sample optical qualities. A new ion irradiation method to realize a multi-domain structure for a wide viewing angle was demonstrated.

36 MATERIALS SCIENCE↗

Twisted liquid crystal pi cell stabilized by polymer-sustained alignment

A uniform {pi}-twist liquid crystal (LC) alignment was stabilized in a pi cell by photopolymerization of a minute amount of monomers without using any chiral material. Controlling UV exposure time can vary the LC pretilt angle to achieve a stabilized {pi}-twist state. This type of {pi}-twisted LC cell made using the polymer-sustained alignment has a pretilt angle estimated to be {approx}20 deg. This cell can quickly transform into a bend state at a low driving voltage and shows excellent brightness and optical contrast, as compared with a conventional pi cell and a chiral-doped cell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thickness-modulated optical dielectric constants and band alignments of HfO{sub x}N{sub y} gate dielectrics

Thickness-modulated optical dielectric constants and band alignments of HfO{sub x}N{sub y} films grown by sputtering have been investigated by spectroscopic ellipsometry (SE) and x-ray photoelectron spectroscopy. Based on SE measurements, it has been noted that an increase in optical dielectric constant and band gap has been observed as a function of the film thickness. Analyses of thickness-dependent band alignment of the HfO{sub x}N{sub y}/Si system indicate that the valence band offset increases, but only slight change in the conduction band offset, resulting from the thickness-induced change in the structure. The suitable optical dielectric constants and band offsets relative to Si make sputtering-derived HfO{sub x}N{sub y} film a promising candidate for high-k gate dielectrics.

36 MATERIALS SCIENCE↗

Electron-shading effect on the horizontal aligned growth of carbon nanotubes

Based on the well-accepted electron-shading theory during plasma processing, we designed microstructures to control the local built-in electric-field on the substrate surface. The distortion magnitude of the electric-field is largest near the sidewalls of the microstructures, creating a horizontal electric-field in this region. We showed that the horizontally aligned carbon nanotubes (CNTs) were grown by making use of this built-in electric-field during the plasma-enhanced chemical vapor deposition process, with a tactical choice of geometries and materials of the microstructures on the substrate. This technique opens up a way to selectively and controllably grow horizontally aligned CNTs on the substrate surface.

36 MATERIALS SCIENCE↗

Periodic alignment of Si quantum dots on hafnium oxide coated single wall carbon nanotubes

We demonstrate a bottom up approach for the aligned epitaxial growth of Si quantum dots (QDs) on one-dimensional (1D) hafnium oxide (HfO{sub 2}) ridges created by the growth of HfO{sub 2} thin film on single wall carbon nanotubes. This growth process creates a high strain 1D ridge on the HfO{sub 2} film, which favors the formation of Si seeds over the surrounding flat HfO{sub 2} area. Periodic alignment of Si QDs on the 1D HfO{sub 2} ridge was observed, which can be controlled by varying different growth conditions, such as growth temperature, growth time, and disilane flow rate.

36 MATERIALS SCIENCE↗

Tri-axial Shape Coexistence and a New Aligned Band in {sup 178}Os

The Os nuclei lie in the beginning of the transitional region between the well deformed rare earth and spherical lead isotopes. The nuclei in this region are believed to be soft to changes in gamma deformation due to the softness of nuclear potential which may result in the shape coexistence. The neutron Fermi levels in Os nuclei from A = 170 to A = 186 lie in the middle of i{sub 13/2} orbital so that their shape in the ground state tends to take an appreciable prolate deformation. Hence collective bands with the well defined moment of inertia occur and the effect of different proton orbitals is observed as a modulation of the prolate structure. The anomalies in the yrast sequence, an effect attributed to change in moment of inertia of the ground state rotational band and the band crossing phenomena, are very important and vary strongly with neutron number in case of Os nuclei. The nuclear structure of {sup 178}Os nucleus has been studied using the reaction {sup 165}Ho({sup 20}Ne, p6n){sup 178}Os. Indian National Gamma Array (INGA) consisting of six Clover detectors with anti Compton shields was used for the detection of resulting gamma rays. The Direction Correlation of {gamma}-rays de-exciting Oriented states (DCO) ratio and polarization of gamma rays were measured to assign spin, parity and multipolarity of transitions. Twenty one new transitions belonging to the {sup 178}Os nucleus have been identified. The sudden and rather strong gain in aligned angular momentum is observed in the yrast band of {sup 178}Os. A new aligned rotational band similar to {sup 180}Os is also discovered in this nucleus. This band exhibits a very complex decay pattern with a single linking transition of 1778 keV to the ground state band. The tri-axial shape co-existence is also observed in this nucleus at higher excitation. The experimental results are compared with the Microscopic Hartree-Fock model calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Light emitting field effect transistor with two self-aligned Si nanocrystal layers

Light emitting field effect transistors based on narrow layers of silicon nanocrystals (NCs) in the gate oxide were fabricated. Direct quantum mechanical electron and hole tunneling into NCs was achieved by self-alignment of NCs-interface-distances to {approx}2 nm. The direct tunneling reduces oxide degradation, prolongs device lifetime and increases operation speed. Self-alignment occurs during thermal treatment of ion irradiated stacks of 50 nm polycrystalline silicon/15 nm SiO{sub 2}/(001)Si substrate. An alternating voltage (ac) was applied to the gate to inject charges into the NCs. Due to injection by direct tunneling, electroluminescence extends to higher ac frequencies than reported so far.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Self-aligned nanostructures created by swift heavy ion irradiation

In tetrahedral amorphous carbon (ta-C) swift heavy ions create conducting tracks of about 8 nm in diameter. To apply these nanowires and implement them into nanodevices, they have to be contacted and gated. In the present work, we demonstrate the fabrication of conducting vertical nanostructures in ta-C together with self-aligned gate electrodes. A multilayer assembly is irradiated with GeV heavy ions and subsequently exposed to several selective etching processes. The samples consist of a Si wafer as substrate covered by a thin ta-C layer. On top is deposited a SiN{sub x} film for insulation, a Cr layer as electrode, and finally a polycarbonate film as ion track template. Chemical track etching opens nanochannels in the polymer which are self-aligned with the conducting tracks in ta-C because they are produced by the same ions. Through the pores in the polymer template, the Cr and SiN{sub x} layers are opened by ion beam sputtering and plasma etching, respectively. The resulting structure consists of nanowires embedded in the insulating carbon matrix with a built in gate electrode and has potential application as gated field emission cathode.

36 MATERIALS SCIENCE↗

Strain-driven alignment of In nanocrystals on InGaAs quantum dot arrays and coupled plasmon-quantum dot emission

We report the alignment of In nanocrystals on top of linear InGaAs quantum dot (QD) arrays formed by self-organized anisotropic strain engineering on GaAs (100) by molecular beam epitaxy. The alignment is independent of a thin GaAs cap layer on the QDs revealing its origin is due to local strain recognition. This enables nanometer-scale precise lateral and vertical site registration between the QDs and the In nanocrystals and arrays in a single self-organizing formation process. The plasmon resonance of the In nanocrystals overlaps with the high-energy side of the QD emission leading to clear modification of the QD emission spectrum.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ionization Gas Sensor using Aligned Multiwalled Carbon Nanotubes Array

The challenge with current conventional gas sensors which are operating using semiconducting oxides is their size. After the introduction of nanotechnology and in order to reduce the dimension and consequently the power consumption and cost, new materials such as carbon nanotubes (CNTs) are being introduced. From previous works and characterization results, it was proven that the CNTs based gas sensor has better sensitivity, selectivity and faster response time in compared with semiconducting oxides based gas sensors. As in this work, a fabrication and successful testing of an ionization-based gas sensor using aligned Multiwalled CNTs (MWCNTs) as sensing element is discussed, in which MWCNTs array and Al film are used as anode and cathode plates respectively with electrode separation ranging from 80 {mu}m to 140 {mu}m. Aligned MWCNTs array was incorporated into a sensor configuration in the gas chamber for testing of gases such as argon, air, and mixed gas of 2%H{sub 2} in air. Obtained results show that among the three gases, argon has the lowest breakdown voltage whilst air has the highest value and the breakdown voltage was found to decrease as the electrode spacing was reduced from 140 {mu}m to 80 {mu}m for all three gases.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Self-aligned epitaxial metal-semiconductor hybrid nanostructures for plasmonics

We demonstrate self-alignment of epitaxial Ag nanocrystals on top of low-density near-surface InAs quantum dots (QDs) grown by molecular beam epitaxy. The Ag nanocrystals support a surface plasmon resonance that can be tuned to the emission wavelength of the QDs. Photoluminescence measurements of such hybrid metal-semiconductor nanostructures reveal large enhancement of the emission intensity. Our concept of epitaxial self-alignment enables the integration of plasmonic functionality with electronic and photonic semiconductor devices operating down to the single QD level.

77 NANOSCIENCE AND NANOTECHNOLOGY↗