Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “accelerator control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Criticality in the Shallow-to-Deep Transition of Simulated Tropical Marine Convection

Idealized simulations of tropical, marine convection depict shallow, nonprecipitating cumuli located beneath the 0°C level transitioning into cumulonimbi that reach up to 12 km and higher. The timing of the transition was only weakly related to environmental stability, and 13 of the 15 simulations run with 5 different lapse-rate profiles had rain develop at nearly the same time after model start. The key quantity that apparently controlled deep convective formation was vertical acceleration inside cloudy updrafts between cloud base and the 0°C level. Below a critical value of updraft vertical acceleration, little rainfall occurred. Just as the domain-mean updraft acceleration reached the critical value, the first convection quickly grew to past 12 km altitude. Then, as acceleration increased above the critical value, rain rate averaged in the model domain increased quickly over about a 3-h-long period. The specific value of the critical updraft acceleration depended on how updrafts were defined and in what layer the acceleration was averaged; however, regardless of how criticality was defined, a robust relationship between domain-mean updraft vertical acceleration and rain rate occurred. Positive acceleration of updrafts below the 0°C level was present below 2.75 km and was largest in the 500 m above cloud base. However, the maximum difference between updraft and environmental temperatures occurred between 2 and 3 km. The domain-mean Archimedean buoyancy of updrafts relative to some reference state was a poor predictor for domain-mean rain rate. In conclusion, the exact value of the critical updraft acceleration likely depends on numerous other factors that were not investigated.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

High Dynamic Voltage Range Studies of Piezoelectric Multilayer Actuators at Low Temperatures

Piezo actuators are used for resonance control in superconducting linacs. In high accelerating gradients linacs, such as those operated in a pulsed mode, the piezos require a large operating voltage. This is due to the Lorentz forced detuning which causes a large frequency shift and is compensated with an active piezo-tuning system. In this high dynamic voltage range the piezo is expected to warm up drastically due to it being in an insulated vacuum. This study characterizes the dielectric properties (capacitance, dielectric losses), the piezo stroke (from geophone), and thermal properties such as heating. Results obtained in the temperature range of 20K to 300K will be presented and discussed.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Jefferson Lab Injector Beamline Upgrade

The Jefferson Lab injector beamline upgrade was completed in 2023, with vacuum improvements throughout the region. I will discuss the effects of the vacuum improvement on photocathode lifetime, the particulate control measures instituted to protect SRF accelerating cavities, and the latest JLab extreme high vacuum gun installation.

Stutzman, Marcy↗
NASA NTRS1971

An analysis and comparison of several trajectory optimization methods

The sensitivities of the convergence characteristics of the methods to initially assumed parameters and trial solution, convergence times, computer logic, and storage requirements are discussed. Numerical comparison of the convergence characteristics is made by considering a minimum time, low thrust, Earth-Mars transfer trajectory. A modified quasi-linearization method reduces convergence time by approximately 70% when compared with the generalized Newton-Raphson method and allows the terminal boundary to be specified by a general function of the problem variables. A uniquely specified and easily determined, time dependent weighting matrix for the gradient techniques accelerates the shaping of the optimal control program and improves the convergence characteristics during the terminal iterations. Convergence envelopes, indicating how sensitive the convergence characteristics are to initially assumed parameters, are plotted for the perturbation and quasi-linearization methods. Several iteration schemes are proposed which increase the size of the convergence envelopes and decrease the sensitivity of the method to initially assumed parameters.

Lewallen, J. M.↗
NASA NTRS1973

Optimal detumbling of a large manned spacecraft using an internal moving mass

The use of a movable mass control system to stabilize an arbitrarily tumbling asymmetric vehicle about the maximum inertia axis is considered. A first-order gradient optimization technique is used to minimize angular velocity components along the intermediate and minimum inertia axes. This method permits a wide range of initial guesses for mass position history. Motion of the control mass is along a linear track fixed in the vehicle. The control variable is taken as mass acceleration with respect to body coordinates. Motion is limited to defined quantities and a penalty function is used to insure a given range of positions. Numerical solutions of the optimization equations verify that minimum time detumbling is achieved with the largest permissible movable mass, length of linear track, and positions of the mass on the two coordinates perpendicular to the linear motion.

Kunciw, B. G.↗
NASA NTRS1973

Preliminary design and simulations of a Shuttle-Attached Manipulator System.

The preliminary design of a Shuttle-Attached Manipulator System is based on two arms that are articulated at shoulder, elbow, and wrist. Details of manipulator design are considered, giving attention to arm reach, velocity, acceleration, torque, joint angular travel limits, control, crew systems and man-machine interface, and telecommunications. The results of man-in-the-loop simulations show the feasibility of grappling a representative space payload from the Shuttle using a long boom manipulator system. The task, however, is sufficiently difficult to require the full concentration of one operator who should be relieved of any other tasks while performing operations with the manipulator system.

Brodie, S. B.↗
NASA NTRS1974

The augmentor wing - Powered-lift STOL a proven concept

A jet-STOL powered-lift aircraft has the ability to perform a relatively steep (7.5 deg) final approach at high power setting and a low speed. The DHC-5 Buffalo/Spey Augmentor-Wing research aircraft is the first machine of its kind to accomplish this performance. The aircraft uses an approach in which the cold bypass thrust is vectored by the augmentor flap. Aspects of aircraft reliability are discussed together with taxi trials, stalling characteristics, lateral directional control, single-engine operations, roll acceleration, and flight in turbulent conditions.

Whittley, D. C.↗
NASA NTRS1980

Operational factors affecting microgravity levels in orbit

Microgravity levels desired for proposed materials processing payloads are fundamental considerations in the design of future space platforms. Disturbance sources, such as aerodynamic drag, attitude control torques, crew motion and orbital dynamics, influence the microgravity levels attainable in orbit. The nature of these effects are assessed relative to platform design parameters such as orbital altitude and configuration geometry, and examples are presented for a representative spacecraft configuration. The possible applications of control techniques to provide extremely low acceleration levels are also discussed.

Olsen, R. E.↗
NASA NTRS1985

Exact spacecraft detumbling and reorientation maneuvers with gimbaled thrusters and reaction wheels

The equations of rotational motion for a spacecraft equipped with external jets and internal reaction wheels are shown to be feedback-equivalent to those of a linear system in attitude parameter space. Reorientation maneuvers are thereby formulated as linear optimal control problems with least mean square acceleration in attitude parameter space, solved in closed form and implementable either with internal or external torque commands, the choice depending on power and throttling requirements. For prior detumbling, an alternative solution with least mean square torque by angular momentum feedback is also given, that is implementable with gimbaled pairs of thrusters at constant throttle. Such a detumbling maneuver may then be followed by an acceleration-commanded rest-to-rest maneuver by means of the reaction wheels.

Dwyer, T. A. W., III↗
NASA NTRS1986

Active controllers and the time duration to learn a task

An active controller was used to help train naive subjects involved in a compensatory tracking task. The controller is called active in this context because it moves the subject's hand in a direction to improve tracking. It is of interest here to question whether the active controller helps the subject to learn a task more rapidly than the passive controller. Six subjects, inexperienced to compensatory tracking, were run to asymptote root mean square error tracking levels with an active controller or a passive controller. The time required to learn the task was defined several different ways. The results of the different measures of learning were examined across pools of subjects and across controllers using statistical tests. The comparison between the active controller and the passive controller as to their ability to accelerate the learning process as well as reduce levels of asymptotic tracking error is reported here.

Repperger, D. W.↗
NASA NTRS1988

O(+) and H(+) escape fluxes from the polar regions

The hydrodynamic transport equations are solved for H(+) and O(+) with allowance made for the important dynamic, collisional, and chemical effects that operate in the F region ionosphere below regions of ion acceleration. It is found that the total ion flux demand imposed on the ionosphere by the higher altitude acceleration region is an important parameter controlling the amount of O(+) in plasma outflows. As solar activity increases, there is an increase in the limiting O(+) escape flux and a decrease in the limiting H(+) escape flux.

Barakat, A. R.↗
NASA NTRS1937

Pressure-Distribution Measurements on O-2H Airplane in Flight

Results are given of pressure-distribution measurements made over two different horizontal tail surfaces and the right wing cellule, including the slipstream area, of an observation-type biplane. Measurements were also taken of air speed, control-surface positions, control-stick forces, angular velocities, and accelerations during various abrupt maneuvers. These maneuvers consisted of push-downs and pull-ups from level flight, dive pull-outs, and aileron rolls with various thrust conditions. The results from the pressure-distribution measurements over the wing cellule are given on charts showing the variation of individual rib coefficients with wing coefficients; the data from the tail-surface pressure-distribution measurements are given mainly as total loads and moments. These data are supplemented by time histories of the measured quantities and isometric views of the rib pressure distributions occurring in abrupt maneuvers.

Pearson, H A↗
NASA NTRS1996

Non-linear resonance of fluids in a crystal growth cavity

In the microgravity environment, the effect of gravity on fluid motion is much reduced. Hence, secondary effects such as vibrations, jitters, surface tension, capillary effects, and electromagnetic forces become the dominant mechanism of fluid convection. Numerous studies have been conducted to investigate fluid behavior in microgravity with the ultimate goal of developing processes with minimal influence from convection. Industrial applications such as crystal growth from solidification of melt and protein growth for pharmatheutical application are just a few examples of the vast potential benefit that can be reaped from material processing in space. However, a space laboratory is not immune from all undesirable disturbances and it is imperative that such disturbances be well understood, quantifiable, and controlled. Non-uniform and transient accelerations such as vibrations, jitters, and impulsive accelerations exist as a result of crew activities, space vehicle maneuvering, and the operations of on-board equipment. Measurements conducted on-board a U.S. Spacelab showed the existence of vibrations in the frequency range of 1 to 100 Hz with a dominant mode of 17 Hz and harmonics of 54 Hz. The observed vibration is not limited to any coordinate plane but exists in all directions. Similar situation exists on-board the Russian MIR space station. Due to the large structure of its design, the future International Space Station will have its own characteristic vibration spectrum. It is well known that vibration can exert substantial influence on heat and mass transfer processes, thus hindering any attempts to achieve a diffusion-limited process. Experiments on vibration convection for a liquid-filled enclosure under one-g environment showed the existence of different flow regimes as vibration frequency and intensity changes. Results showed the existence of a resonant frequency, near which the enhancement is the strongest, and the existence of a high frequency asymptote. Numerical simulations of vibration convection have been conducted by Yurkov, Fu and Shieh, and by Wang. These analyses considered a two-dimensional air-filled cell under weightlessness condition and showed results similar to those of the experiments. It is not yet known whether resonance convection can be triggered by jitter alone or whether it requires the interaction of jitter with other convective forces in low gravity. An order of magnitude analysis, however, can be used to show the dependence of the resonance frequency on the fluid Prandtl number. Even though the onset of resonance convection may depend on other factors, results indicates that fluids with low Prandtl numbers are more susceptible to resonance than those with high Prandtl numbers. The current study is aimed at gaining additional insights to this problem using germanium as working fluid. Germanium was chosen for this analysis because of its common usage in solidification process and its relatively low Prandtl number (Pr = 0.02).

Wang, Francis C.↗
NASA NTRS1997

Constrained Multipoint Aerodynamic Shape Optimization Using an Adjoint Formulation and Parallel Computers

An aerodynamic shape optimization method that treats the design of complex aircraft configurations subject to high fidelity computational fluid dynamics (CFD), geometric constraints and multiple design points is described. The design process will be greatly accelerated through the use of both control theory and distributed memory computer architectures. Control theory is employed to derive the adjoint differential equations whose solution allows for the evaluation of design gradient information at a fraction of the computational cost required by previous design methods. The resulting problem is implemented on parallel distributed memory architectures using a domain decomposition approach, an optimized communication schedule, and the MPI (Message Passing Interface) standard for portability and efficiency. The final result achieves very rapid aerodynamic design based on a higher order CFD method. In order to facilitate the integration of these high fidelity CFD approaches into future multi-disciplinary optimization (NW) applications, new methods must be developed which are capable of simultaneously addressing complex geometries, multiple objective functions, and geometric design constraints. In our earlier studies, we coupled the adjoint based design formulations with unconstrained optimization algorithms and showed that the approach was effective for the aerodynamic design of airfoils, wings, wing-bodies, and complex aircraft configurations. In many of the results presented in these earlier works, geometric constraints were satisfied either by a projection into feasible space or by posing the design space parameterization such that it automatically satisfied constraints. Furthermore, with the exception of reference 9 where the second author initially explored the use of multipoint design in conjunction with adjoint formulations, our earlier works have focused on single point design efforts. Here we demonstrate that the same methodology may be extended to treat complete configuration designs subject to multiple design points and geometric constraints. Examples are presented for both transonic and supersonic configurations ranging from wing alone designs to complex configuration designs involving wing, fuselage, nacelles and pylons.

Reuther, James↗