Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “XRD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Radiation-Induced Changes in Single Crystal Calcite and Dolomite: Mineral Analogues of Light Water Reactor, Nuclear Power Plant Concrete Aggregates

Two analogues of aggregates (calcite and dolomite) found in nuclear power plant (NPP) concrete have been neutron irradiated to fluences up to 2 × 10 20 n/cm 2 at 52 °C and 4 × 10 19 n/cm 2 at 95 °C (E > 0.1 MeV). X-ray diffraction studies showed that these aging conditions affected crystallography of both calcite and dolomite, with both showing a growth in their unit cells compared to that of the unirradiated samples. Only dolomite samples showed a continuous increase of its lattice parameters with the increase in irradiation. In calcites, the lattice growth with irradiation dissipated after a fluence of 5 × 10 18 n/cm 2 . Radiation-induced disordering of the crystal structure was observed in both materials, while a healing effect of irradiation temperature was mainly observed in calcites. Dislocation densities calculated by using XRD data also supported these observations. Insights made into the unit cells of both minerals by using Fourier synthesis showed that the Mg sites are more prone to the neutron irradiation than the Ca sites, resulting in larger radiation effects and higher disruption in the crystal structure of dolomite than that of calcite. Furthermore, other than the polycrystalline characteristics observed by using TEM, these minerals did not show complete amorphization or significant structural decomposition at the studied irradiation fluences.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Vapor-Phase Intercalation of Cesium into Black Phosphorous

Cesium vapors were charged into black phosphorous (BP) flakes at varied times and at a temperature gradient of 150 °C. The X-ray diffraction (XRD) measurements of these samples suggest a reduction in the strength of van der Waal interactions between BP layers leading to the loss of coherence of out-of-plane peaks. At the same time, the three main Raman modes of BP (A g 1 , B 2 g , and A g 2 ) steadily redshifted as exposure times were increased, with modes B 2 g and A g 2 shifting faster than A g 1 . After initial rapid downshifts of active BP phonon modes, this intercalation strategy showed its limits following prolonged exposure times. Saturation of BP flakes by Cs vapors ensued and the kinetics was fitted with an exponential decay function. Furthermore, the thermoelectric power (TEP) of cesiated BP exhibited an inversion in sign from positive to negative around 400 K, lending credence to the transformation of as-prepared BP which is a p-type semiconductor to an n-type equivalent due to Cs atom intercalation driven shifting of the Fermi level toward the conduction band of BP and the donation of electrons from Cs. Furthermore, density functional theory (DFT) calculations were used to delve deeper into understanding Cs intercalation on the structural evolution of BP.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A Study of How LaFeO 3 and CaTiO 3 Supports Affect the Oxidation, Hydrogenation, and Methane Steam Reforming Activity of Pt and Ni Catalysts

The structure and catalytic properties of Pt and Ni supported on thin films of LaFeO 3 and CaTiO 3 , prepared by Atomic Layer Deposition (ALD), were investigated. X-Ray diffraction (XRD) and scanning transmission electron microscopy (STEM) show that reduction at 1073 K causes Pt-Fe intermetallic compound formation for Pt/LaFeO 3 . For Pt/CaTiO 3 , 1073-K reduction induces local decomposition of the CaTiO 3 with migration of Ti to the Pt. Reduced Pt/LaFeO 3 and Pt/CaTiO 3 exhibited CO-oxidation activity similar to that for Pt supported on MgAl 2 O 4 but were much less active for propane oxidation and hydrogenation of 1-hexene and toluene. In contrast, Ni/CaTiO 3 behaved similarly to a conventional supported Ni catalyst for the methane-steam-reforming (MSR) and 1-hexene hydrogenation. There was also no evidence for local decomposition of the perovskite in the vicinity of the Ni particles. Furthermore, the results obtained in this study demonstrate that metal-perovskite interactions that affect reactivity are specific to each component.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Investigating the Role of Silver Oxidation State on the Thermodynamic Interactions between Xenon and Silver-Functionalized Zeolites

The molecular level understanding of the strong adsorption of Xe to silver-modified zeolites remains elusive. Here, we probe the effect of silver oxidation state on the thermodynamics of Xe sorption in silver-functionalized zeolites by measuring the enthalpies of adsorption after various treatments using inverse gas chromatography (IGC). The enthalpy of adsorption was measured for silver-functionalized chabazites (AgCHA) before and after hydrogen reduction and subsequent reoxidation. The sorption enthalpy (ΔH) for AgCHA was 35.2 kJ/mol, which decreased to 25.8 kJ/mol with hydrogen reduction. After reoxidation (O 2 -AgCHA), 95% of the binding strength was restored. Hydrogen reduction of the base chabazite (CHA) did not influence Xe adsorption. Henry’s law constant for Xe adsorption increased in the order AgCHA > O 2 -AgCHA > H 2 -AgCHA > CHA. A decrease in enthalpy and Henry’s constant with silver reduction and increase with reoxidation suggest that ionic silver is playing a role in Xe binding. The effect of reduction and reoxidation on the zeolite microstructure was analyzed using surface area analysis, powder X-ray diffraction (p-XRD), scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS), and X-ray photoelectron spectroscopy (XPS). Finally, these results lay the groundwork for better material design of strong noble gas adsorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Degradation in Ni-Rich LiNi 1– x – y Mn x Co y O 2 /Graphite Batteries: Impact of Charge Voltage and Ni Content

Ni-rich LiNi 1– x–y Mn x CoyO 2 (NMC) materials are attractive as cathodes for Li-ion batteries due to their high energy density and low Co content. However, these materials may display poor electrochemical reversibility relating to structural and interfacial instabilities. The influence of Ni content and level of delithiation during charge on degradation mechanisms and relevance to electrochemical cycling behavior are probed for LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) and LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cathode materials in a full cell configuration under two upper voltage limits (4.1 and 4.3 V). The combined use of dQ/dV analysis of electrochemical voltage profiles, operando XRD, and postcycling scanning electron microscopy (SEM) measurements indicates that a major contributor to capacity fade is the large anisotropic volume change from an H2 $\leftrightarrows$ H3 phase transition and associated mechanical degradation particularly for NMC811. Notably, transition metal dissolution and deposition on the negative electrode are found to correlate with the structural changes occurring in the cathode under high voltage charge. X-ray photoelectron spectroscopy (XPS) analyses of the cycled cathodes reveal a more organic-rich cathode–electrolyte interphase (CEI) when cycling to 4.3 V with lower relative amounts of LiF. Surface reconstruction is not a significant factor under these cycling conditions as determined by soft X-ray absorption spectroscopy (sXAS) analysis. The results emphasize the opportunity to match the electrochemical test parameters with the specific NMC active material to mitigate degradation and extend cycle life.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Effects of Ionizing Radiation on the Thermodynamic Stability of Boehmite and Gibbsite

Here, in this study, we examined the effect of gamma radiation on the stabilities of aluminum hydroxide (gibbsite) and aluminum oxyhydroxide (boehmite) nanoparticles in relation to their thermal decomposition. X-ray diffraction (XRD) patterns and scanning electron microscopy (SEM) images revealed no significant differences in mineral components or morphology before and after radiation. However, thermogravimetric and differential scanning calorimetry (TGA/DSC) analyses showed that both boehmite and gibbsite nanoparticles experienced decreased mass loss following irradiation. Raman and attenuated total reflection-Fourier transfer infrared (ATR-FTIR) spectra indicated that a fraction of the hydroxyl content in both cases was selectively cleaved by radiation, primarily at the particle surfaces. Quantitative analyses of thermal mass loss behavior demonstrated that irradiated boehmite and gibbsite nanoparticles had higher activation energies than their pristine counterparts, with the extent of the increase dependent on the total dose. Taken together, these findings suggest that exposure to a sufficient dose of ionizing radiation alters these materials such that they are less prone to decomposition by dehydration. This increased stability may be due to the decreased hydrous nature of the samples after radiation exposure, which was supported by further high temperature drop calorimetry. Additionally, a radiation-induced amorphous phase on the nanoparticle surfaces appears to have a permanent and positive influence on their thermodynamic stabilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Effect of Pressure on Crystal Structure and Phonon Density of States of FeSi

The strongly correlated material FeSi displays several unusual thermal, magnetic, and structural properties under varying pressure-temperature (P-T) conditions. It is a potential thermoelectric alloy and a material with several geochemical implications as a possible constituent at the Earth's core-mantle boundary (CMB). Previous theoretical studies predicted a pressure-induced B20-B2 transition at ambient temperature below 40 GPa; however, experimentally, the structural transition is observed only at high P-T conditions. In this study, we have performed high-pressure powder X-ray diffraction (XRD) up to 90 GPa and Nuclear Resonant Inelastic X-ray Scattering (NRIXS) measurements up to 120 GPa to understand the phase stability and lattice dynamics. Our study provides evidence for a non-hydrostatic stress-induced B20-B2 transition in FeSi at around 36 GPa. We deduced the Fe partial phonon density of states (PDOS) and thermal parameters from NRIXS measurements up to 120 GPa and compared them with density functional theory (DFT) calculations. Furthermore, the computations show pressure-induced metallization and the band gap closing around 12 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Low Frequency Vibrational Modes of Two-Dimensional Lead-Free Metal Halide Double Perovskites

2D layered double perovskites of (S-MPA) 4 AgBiI 8 (MPA-AgBiI 8 ) and (S-MPA) 4 CuBiI 8 (MPA-CuBiI 8 ) (S-MPA, S-β-methylphenethylammonium) were synthesized with a hydrothermal method. The crystal structure of MPA-AgBiI 8 was determined using single-crystal X-ray diffraction (scXRD). Powder XRD (pXRD) data suggest that the crystal structure of MPA-CuBiI 8 is more complex than that of MPA-AgBiI 8 . UV-Vis electronic absorption spectra of these perovskites reveal a bandgap of 2.03 eV for both. Short exciton lifetime from time-resolved photoluminescence (TRPL) results and low PL intensity of the Cu-based perovskite suggest a high density of trap states within the bandgap. Low frequency Raman spectra of both materials show distinct peaks and a slightly higher frequency for the Cu-based perovskite than the Ag-based perovskite. Density functional theory (DFT) calculations were conducted to simulate the low frequency Raman spectra and help explain the different phonon modes, which are collective vibrations of metal halide bond bending and stretching within the Ag- and Cu-centered octahedra coupled with MPA libration and twisting within the inorganic layer. The DFT theory also quantified octahedral distortions in the two perovskites. Furthermore, this combined experimental and computational study provides new insights into the low frequency vibrations of 2D perovskites.

Halogens↗
DOE OSTI2026

Tea ( Camellia sinensis ) Extract-Mediated Green Synthesis of Co 3 O 4 and Co 3 O 4 @Graphene Nanocomposites for Multifunctional Applications in Pollutant Degradation, Sensing, and Energy Storage

A novel solution-mixing method was proposed to synthesize Co 3 O 4 /graphene nanocomposites (Co 3 O 4 @Gr) using a green tea leaf (Camellia sinensis) extract as the reducing agent. XRD analysis shows that the as-prepared Co 3 O 4 @Gr exhibits a cubic spinel crystal structure. From morphological analysis, the obtained Co 3 O 4 NS forms spherical clusters that are uniformly distributed on the graphene surface. FT-IR and Raman analyses confirmed the strong molecular and vibrational interactions between the Co 3 O 4 NS and Gr. The suppressed PL intensity peak of the Co 3 O 4 @Gr NCs indicated significant inhibition in the recombination of charge carriers between the hybrid orbitals within the composites. As a result, the catalytic efficiency of Co 3 O 4 @Gr NCs increased to 80% compared to pristine Co 3 O 4 , which exhibited only 45% efficiency against methylene blue (MB) dye. Moreover, the as-prepared NCs exhibited a detection limit of 0.01−224 μM, demonstrating a superior low-DPA detection with high sensitivity. The Co 3 O 4 @Gr/GCE exhibits admirable selectivity for various pesticides, fungicides, and metal ions, with outstanding reproducibility and stability. From electrochemical investigations, the highest specific capacitance values of the as-synthesized Co 3 O 4 @Gr were 349 F/g at a scan rate of 5 mV/s and 158 F/g at a current density of 1 A/g.

Capacitors↗
DOE OSTI2020

Design, Synthesis, and Characterization of Polymer Precursors to Li x PON and Li x SiPON Glasses: Materials That Enable All-Solid-State Batteries (ASBs)

LiPON-like glasses that form lithium dendrite impenetrable interfaces between lithium battery components are enabling materials that may replace liquid electrolytes permitting production of all-solid-state batteries (ASBs). Unfortunately, to date, such materials are introduced only via gas-phase deposition. Furthermore, we demonstrate the design and synthesis of easily scaled, lowtemperature, low-cost, solution-processable inorganic polymers containing LiPON/LiSiPON elements. OPCl 3 and hexachlorophosphazene [Cl 2 P=N] 3 provide starting points for elaboration using MNH 2 (M = Li/Na) or (Me 3 Si)NH followed by reaction with controlled amounts of LiNH 2 to produce oligomers/polymers with molecular weights (MWs) ≈1–2 kDa characterized by multinuclear NMR, gel permeation chromatography (GPC), thermogravimetric analysis (TGA), Fourier-transform infrared (FTIR), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and matrix-assisted laser desorption/ ionization (MALDI)-time-of-flight (ToF) offering stabilities to 150–200 °C and ceramic yields (800 °C) of 50–60%. 7 Li NMR suggests that precursor-bound Li + dissociates easily, beneficial for electrochemical applications. XPS shows higher N/P ratios (1–3) than via gas-phase methods (<1) correlating N/P ratios, 7 Li shifts, and Li + conductivities. Li 2 SiPHN offers the highest ambient conductivity of 3 × 10 –1 mS cm –1 at 400 °C/2 h/N 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2020

Enhanced Low-Temperature Thermoelectric Performance in (PbSe) 1+δ (VSe 2 ) 1 Heterostructures due to Highly Correlated Electrons in Charge Density Waves

We explore the effect of charge density wave (CDW) on the in-plane thermoelectric transport properties of (PbSe) 1+δ (VSe 2 ) 1 and (PbSe) 1+δ (VSe 2 ) 2 heterostructures. In (PbSe) 1+δ (VSe 2 ) 1 we observe an abrupt 86% increase in the Seebeck coefficient, 245% increase in the power factor, and a slight decrease in resistivity over the CDW transition. This behavior is not observed in (PbSe) 1+δ (VSe 2 ) 2 and is rather unusual compared to the general trend observed in other materials. The abrupt transition causes a deviation from the Mott relationship through correlated electron states. Raman spectra of the (PbSe) 1+δ (VSe 2 ) 1 material show the emergence of additional peaks below the CDW transition temperature associated with VSe 2 material. Temperature-dependent in-plane X-ray diffraction (XRD) spectra show a change in the in-plane thermal expansion of VSe 2 in (PbSe) 1+δ (VSe 2 ) 1 due to lattice distortion. Here, the increase in the power factor and decrease in the resistivity due to CDW suggest a potential mechanism for enhancing the thermoelectric performance at the low temperature region.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Diffusion-Limited Kinetics of Isovalent Cation Exchange in III–V Nanocrystals Dispersed in Molten Salt Reaction Media

The goal of this work is to determine the kinetic factors that govern isovalent cation exchange in III–V colloidal quantum dots using molten salts as the solvent and cation source. We focus on the reactions of InP + GaI 3 → In 1 – x Ga x P and InAs + GaI 3 → In 1–x Ga x As to create technologically important ternary III–V phases. We find that the molten salt reaction medium causes the transformation of nearly spherical InP nanocrystals to tetrahedron-shaped In 1–x Ga x P nanocrystals. Furthermore, we determine that the activation energy for the cation exchange reaction is 0.9 eV for incorporation of Ga into InP and 1.2 eV for incorporation of Ga into InAs, both much lower than the measured values in bulk semiconductors. Next, we use powder XRD simulations to constrain our understanding of the structure of the In 1–x Ga x P nanocrystals. Together our results reveal several important features of molten salt-mediated cation exchange and provide guidance for future development of these materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

P2-Type Moisture-Stable and High-Voltage-Tolerable Cathodes for High-Energy and Long-Life Sodium-Ion Batteries

P2-Na 0.67 Ni 0.33 Mn 0.67 O 2 represents a promising cathode for Na-ion batteries, but it suffers from severe structural degradation upon storing in a humid atmosphere and cycling at a high cutoff voltage. Here we propose an in situ construction to achieve simultaneous material synthesis and Mg/Sn cosubstitution of Na 0.67 Ni 0.33 Mn 0.67 O 2 via one-pot solid-state sintering. Here, the materials exhibit superior structural reversibility and moisture insensitivity. In-operando XRD reveals an essential correlation between cycling stability and phase reversibility, whereas Mg substitution suppressed the P2–O2 phase transition by forming a new Z phase, and Mg/Sn cosubstitution enhanced the P2–Z transition reversibility benefiting from strong Sn–O bonds. DFT calculations disclosed high chemical tolerance to moisture, as the adsorption energy to H 2 O was lower than that of the pure Na 0.67 Ni 0.33 Mn 0.67 O 2 . A representative Na 0.67 Ni 0.23 Mg 0.1 Mn 0.65 Sn 0.02 O 2 cathode exhibits high reversible capacities of 123 mAh g –1 (10 mA g –1 ), 110 mAh g –1 (200 mA g –1 ), and 100 mAh g –1 (500 mA g –1 ) and a high capacity retention of 80% (500 mA g –1 , 500 cycles).

25 ENERGY STORAGE↗
DOE OSTI2026

Epitaxial Electrodeposition of Fe with Controlled In-Plane Variants for a Reversible Metal Anode in an Aqueous Electrolyte

The development of reversible metal anodes is a key challenge for advancing aqueous battery technologies, particularly for scalable and safe stationary energy storage applications. Here, in this study, we demonstrate a strategy to realize epitaxial electrodeposition of iron (Fe) on single-crystal copper (Cu) substrates in aqueous electrolytes. We compare the electrodeposition behavior of Fe on polycrystalline and single-crystalline Cu substrates, revealing that the latter enables highly uniform, dense, and crystallographically aligned Fe growth. Comprehensive electron backscatter diffraction (EBSD) and X-ray diffraction (XRD) analysis confirms the formation of Fe with specific out-of-plane and in-plane orientations, including well-defined rotational variants. Our findings highlight that epitaxial electrodeposition of Fe can suppress dendritic growth and significantly enhance Coulombic efficiency during plating/stripping cycles. This approach bridges fundamental crystallography with practical electrochemical performance, providing a pathway toward high-efficiency aqueous batteries utilizing Earth-abundant materials.

aqueous battery↗
DOE OSTI2021

Role of the X Coligands in Cyclometalated [Ni(Phbpy)X] Complexes (HPhbpy = 6-Phenyl-2,2'-bipyridine)

The coligand X was varied in the organonickel complexes [Ni(Phbpy)X] (X = F, Cl, Br, I, C 6 F 5 ) carrying the anionic tridentate C^N^N ligand 6-(phen-2-ide)-2,2'-bipyridine (Phbpy – ) to study its effect on electronic structures of these complexes and their activity in Negishi-like C–C cross-coupling catalysis. The complexes were synthesized from the precursor [Ni(COD) 2 ] (COD = 1,5-cyclooctadiene) by chelate-assisted oxidative addition into the phenyl C–X bond of the protoligand 6-(2-halidophenyl)-2,2'-bipyridine) and were obtained as red powders. Protoligands X–Phbpy carrying the halide surrogates X = OMe, OTf (triflate) failed in this reaction. Single-crystal XRD allowed us to add the structures of [Ni(Phbpy)Cl] and [Ni(Phbpy)I] to the previously reported Br derivative. Cyclic voltammetry showed reversible reductions for X = C 6 F 5 , F, Cl, while for Br and I the reversibility is reduced through rapid splitting of X – after reduction (EC mechanism). UV–vis spectroelectrochemistry confirmed the decreasing degree of reversibility along the series C 6 F 5 > F > Cl » Br > I, which parallels the “leaving group character” of the X coligands. This method also revealed mainly bpy centered reduction and essentially Ni(II)/Ni(III) oxidations, as corroborated by DFT calculations. The rather X-invariant long-wavelength UV–vis absorptions and excited states were analyzed in detail using TD-DFT and were consistent with predominant metal to ligand charge transfer (MLCT) character. Initial catalytic tests under Negishi-like conditions showed the complexes to be active as catalysts in C–C cross-coupling reactions but did not display marked differences along the series from Ni–F to Ni–I.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Synthesis of Cp* Terphenylamido U(III) Iodide Complexes with a Substitutable Iodide Position to Generate Terminal U(III)–(κ 3 -BH 4 ) Complexes

Reaction of Cp*UI 2 (THF) 3 (Cp* = pentamethylcyclopentadienide; THF = tetrahydrofuran) with Na R3 TerNH ( R3 Ter = 2,6(2,4,6-R 3 C 6 H 2 ) 2 C 6 H 3 ; R = Me, Et, iPr) gave the U(III) monoiodide complexes Cp*( R3 TerNH)UI (R = Me, 1-Me; R = Et, 2-Et; R = iPr, 3-iPr). These complexes contain a functionalizable iodide position which reacts favorably with NaBH4 to give the κ 3 -borohydride complexes Cp*( R3 TerNH)U(H 3 BH) (R = Me, 4-Me; R = Et, 5-Et; R = iPr, 6-iPr). All compounds were experimentally characterized by SC-XRD, 1 H and 11 B NMR spectroscopy as well as UV–vis–NIR and FTIR analyses. DFT calculations corroborate the experimental findings, confirming the 5f 3 U(III) configuration across the entire series and revealing an increased U 5f orbital contribution in the borohydride derivatives. All compounds exhibit small but non-negligible U(III)–(η 6 -arene) δ-back-bonding interactions arising from the unpaired 5f electrons. Calculated steric parameters show progressively greater shielding of the U(III) center with increasing bulk of the terphenyl substituents from Me to iPr.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Plasma-Induced Tailoring of Graphene Oxide Surfaces for Electrochemical Applications: Functionalization and Etching

This study investigates the use of radio frequency air plasma as an eco-friendly method to rapidly and reversibly tailor the surface properties of graphene oxide (GO) films. We observed a transition from hydrophilic (contact angle ∼55°) to superhydrophilic (<10°) with short plasma exposure, attributed to a synergistic combination of surface modification and etching. Spectroscopic analyses (FTIR, XPS) revealed early stage formation of carbonyl groups and reduction of hydroxyls, while longer treatments induced atomic-level etching (AFM) and structural changes (XRD). This surface engineering enhanced the dielectric properties of GO films but led to reduced aqueous stability. The elucidated interplay between plasma-induced functionalization and etching provides valuable insights for the controlled modification of GO surfaces for various applications, including advanced dielectrics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Imaging the Phase Transformation in Single Particles of Lithium Titanate Anode for Lithium-ion Batteries

Lithium uptake and release in lithium titanate (LTO) anode materials during a discharge and charge cycle is one of the fundamental processes of a Lithium-ion battery (LIB), still not fully understood at the microscopic level.During discharge cycle, LTO undergoes a phase transformation between Li 4 Ti 5 O 12 and Li 7 Ti 5 O 12 states within a cubic crystal lattice. To reveal the details of the microscopic mechanism,it is necessary to track the sequence of phase transformation sat different discharge/charge states under operating conditions.Here we use in-situ Bragg Coherent Diffraction Imaging (BCDI) and in-situ X-ray diffraction (XRD) experiments to examine the lithium insertion-induced materials phase transformation within a single LTO particle anda bulk battery analogue,respectively. BCDI analysis from (111) Bragg peak, shows the two-phase transformation manifesting as a distinct image phase modulation within a single LTO nanoparticle occurring in the middle of the discharge region then subsiding towards the end of the discharge cycle. We observe the biggest phase variation at the two-phase stage,indicating the formation of phase domains of 200 nm in size during the discharge process. Additionally, we also observe a lattice contraction of >0.2% in a single LTO nanoparticle at the (400) Bragg peak measurement, larger than that in the corresponding bulk material. Our observation of this phase transformation at a single particle level has implications for the understanding of the microscopic/mesoscale picture of the phase transformation in anode and cathode LIBs materials.

25 ENERGY STORAGE↗