Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WIRES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Implosion dynamics and x-ray generation in small-diameter wire-array Z pinches

It is known from experiments that the radiated x-ray energy appears to exceed the calculated implosion kinetic energy and Spitzer resistive heating [C. Deeney et al., Phys. Rev. A 44, 6762 (1991)] but possible mechanisms of the enhanced x-ray production are still being discussed. Enhanced plasma heating in small-diameter wire arrays with decreased calculated kinetic energy was investigated, and a review of experiments with cylindrical arrays of 1-16 mm in diameter on the 1 MA Zebra generator is presented in this paper. The implosion and x-ray generation in cylindrical wire arrays with different diameters were compared to find a transition from a regime where thermalization of the kinetic energy is the prevailing heating mechanism to regimes with other dominant mechanisms of plasma heating. Loads of 3-8 mm in diameter generate the highest x-ray power at the Zebra generator. The x-ray power falls in 1-2 mm loads which can be linked to the lower efficiency of plasma heating with the lack of kinetic energy. The electron temperature and density of the pinches also depend on the array diameter. In small-diameter arrays, 1-3 mm in diameter, ablating plasma accumulates in the inner volume much faster than in loads of 12-16 mm in diameter. Correlated bubblelike implosions were observed with multiframe shadowgraphy. Investigation of energy balance provides evidence for mechanisms of nonkinetic plasma heating in Z pinches. Formation and evolution of bright spots in Z pinches were studied with a time-gated pinhole camera. A comparison of x-ray images with shadowgrams shows that implosion bubbles can initiate bright spots in the pinch. Features of the implosions in small-diameter wire arrays are discussed to identify mechanisms of energy dissipation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of Mass Ablation on the Scaling of X-Ray Power with Current in Wire-Array Z Pinches

X-ray production by imploding wire-array Z pinches is studied using radiation magnetohydrodynamics simulation. It is found that the density distribution created by ablating wire material influences both x-ray power production, and how the peak power scales with applied current. For a given array there is an optimum ablation rate that maximizes the peak x-ray power, and produces the strongest scaling of peak power with peak current. This work is consistent with trends in wire-array Z pinch x-ray power scaling experiments on the Z accelerator.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Conductance of fully equilibrated quantum wires.

We study the conductance of a quantum wire in the presence of weak electron-electron scattering. In a sufficiently long wire the scattering leads to full equilibration of the electron distribution function in the frame moving with the electric current. At nonzero temperature this equilibrium distribution differs from the one supplied by the leads. As a result the contact resistance increases, and the quantized conductance of the wire acquires a quadratic in temperature correction. The magnitude of the correction is found by analysis of the conservation laws of the system and does not depend on the details of the interaction mechanism responsible for equilibration.

36 MATERIALS SCIENCE↗

Bond Wire Damage Detection and State of Health Estimation of a 1200V, 900A Dual Pack IGBT Power Module using the RL-Equivalent Circuit

Electrical and environmental stresses are the two dominant contributors in aging and failure of power semiconductor devices. Insulated gate bipolar junction transistors (IGBTs) and metal-oxide semiconductor field effect transistors (MOSFETs) are two most commonly used switching devices in power converter circuits. A significant portion of research effort is given in inventing innovative methods to estimate the degradation and fatigue in these devices. Until today, no other existing techniques can determine the number of lifted bond wires and their locations in a live IGBT module, although this information is extremely helpful to understand the overall state of health of an IGBT power module. In this paper, we have proposed a reflectometry-based technique to overcome this hurdle. The RL-equivalent circuit to represent a bond wire has been developed for the device under test and simulated in CST Studio Suite to measure the reflection amplitudes. Experimental results were obtained using a prototype reflectometry hardware, and both the simulation and experimental results have been compared. These results prove that with these two sets of measurements, it is possible to locate the aged device inside a module and detect the number of bond wire lift-offs associated to that device.

30 DIRECT ENERGY CONVERSION↗

Mid-Atomic-Number Cylindrical Wire Array Precursor Plasma Studies on Zebra

The precursor plasmas from low wire number cylindrical wire arrays (CWAs) were previously shown to radiate at temperatures >300 eV for Ni-60 (94% Cu and 6% Ni) wires in experiments on the 1-MA Zebra generator. Continued research into precursor plasmas has studied additional midatomic-number materials including Cu and Alumel (95% Ni, 2% Al, 2% Mn, and 1% Si) to determine if the >300 eV temperatures are common for midatomic-number materials. Additionally, current scaling effects were observed by performing CWA precursor experiments at an increased current of 1.5 MA using a load current multiplier. Our results show an increase in a linear radiation yield of ~50% (16 versus 10 kJ/cm) for the experiments at increased current. However, plasma conditions inferred through the modeling of X-ray time-gated spectra are very similar for the precursor plasma in both current conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tungsten quasispherical wire loads with a profiled mass

Wire arrays made from micrometer tungsten wires with linear mass profiled along their height are developed for experiments on the generation of X-ray radiation upon pinch compression with a current of ∼3 MA at a pulse duration of ∼100 ns. Wires are imaged with a scanning electron microscope, and their diameter is determined. It is shown that the arrays have such a profile of height distribution of linear mass that allows for compact spherical compression upon current implosion.

36 MATERIALS SCIENCE↗

Spatiotemporal behavior of X-ray emission above 20 keV from a Z-pinch produced by wire-array implosion

Results are presented from experimental studies of hard X-ray (HXR) emission in the photon energy range above 20 keV from dense radiating Z-pinch plasmas. The work is aimed at revealing the nature of fast-electron (electron beam) generation during the implosion of cylindrical and conical wire arrays in the Angara-5-1 facility at currents of up to 3 MA. It is found that the plasma implosion zippering caused by the inclination of wires affects the parameters of the HXR pulse emitted during the implosion of a conical array. It is shown that HXR emission correlates well with the decay of the plasma column near the cathode in the stagnation phase. HXR images of the pinch are produced by the bremsstrahlung of fast electrons generated during plasma column decay and interacting with plasma ions and the anode target. It is found that the use of conical arrays makes it possible to control the direction of plasma implosion zippering and the spatiotemporal and energy parameters of the pinch X-ray emission, in particular the X-ray yield. For wire array with diameters of 12 mm and linear masses of 200-400 {mu}g/cm, the current of the fast electron beam is 20 kA and its energy is 60 J, which is about 1/500 of the energy of the main soft X-ray pulse.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of the core gaps formed accidentally during wire explosion

During wire explosion, along with striations (a regular structure with alternating lower and higher density bands), low-density regions the characteristic axial size of which differs substantially from that of striations and can reach 1-2 mm are also observed in the discharge channel. Such irregular structures came to be known as 'gaps' (D. B. Sinars et al., Phys. Plasmas 8, 216 (2001)). In the present study, the mechanism of the formation of core gaps during explosions of 25- and 50-{mu}m-diameter copper and nickel wires in air is investigated. It is shown that the specific energy deposited in the gap region substantially exceeds the average specific energy deposited in the wire material.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-frequency conductivity of a thin cylindrical semiconductor wire at arbitrary temperatures

The high-frequency conductivity of a thin straight semiconductor wire with a circular cross section is treated in the context of the classical kinetic theory. The calculation is conducted for an extrinsic semiconductor with a simple band structure at any degree of degeneracy. The relation between the wire radius and the mean free path of charge carriers is taken to be arbitrary. The diffuse mechanism of reflection of charge carriers from the wire boundary is considered.

36 MATERIALS SCIENCE↗

Polarization of the photoluminescence of quantum dots incorporated into quantum wires

The photoluminescence spectra of individual quantum dots incorporated into a quantum wire are studied. From the behavior of the spectra in a magnetic field, it is possible to estimate the exciton binding energy in a quantum dot incorporated into a quantum wire. It is found that the exciton photoluminescence signal emitted from a quantum dot along the direction of the nanowire axis is linearly polarized. At the same time, the photoluminescence signal propagating in the direction orthogonal to the nanowire axis is practically unpolarized. The experimentally observed effect is attributed to the nonaxial arrangement of the dot in the wire under conditions of a huge increase in the exciton binding energy due to the effect of the image potential on the exciton.

36 MATERIALS SCIENCE↗

Color Ultrafast Photography Study of a High-Current Discharge Initiated by Exploding a Short Wire in the Atmosphere

In this paper, we describe the ultrafast slit-scanning photography of light phenomena arising at the stage of the electrical breakdown in the atmosphere and in a channel initiated by a wire explosion. The characteristics and features of the photographic registration of the SFR-1 camera using color and spectrozonal negative aerial films sensitive in the visible and near infrared regions of the optical spectrum are presented. Using photograms in color, we were able to visualize small-scale inhomogeneities, a current-carrying channel and its “shell,” emissions of matter, and shock waves in the plasma. This technique made it possible to record a secondary shock wave in the plasma on the discharge axis during the explosion of short (length ≈15 mm) copper and nichrome wires with a diameter of 100–150 μm at a stored energy of ~100 J. At the moment of cumulation in the plasma, a “hot spot” with a minimum size of ~0.5 mm was formed on the discharge axis. It may be the source of narrow-beam coherent radiation with X-ray photon energies of 10–30 keV. The cumulation mechanism is discussed based on the regularities of the z-pinch phenomenon in a discharge initiated by a wire explosion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Self-Induction of a Fine Cylindrical Metallic Wire Versus a Mechanism of Electron Surface Scattering

The self-induction of a thin cylindrical metallic wire has been calculated. A general case when the ratio of the electron free path to the wire radius may take an arbitrary value has been considered. The dependence of the regular reflectance on surface defect density and angle of incidence of electrons on the wire’s inner surface has been taken for boundary conditions of the problem.

36 MATERIALS SCIENCE↗

High-Fidelity Numerical Investigation on Elucidating Sodium Heat Transfer Characteristics for 37-Pin Wire-Wrapped Fuel Bundle in the PLANDTL Facility

This study involved a Reynolds-averaged Navier-Stokes- (RANS-) based computational fluid dynamics (CFD) analysis of the 37-pin wire-wrapped fuel bundle of the PNC Plant dynamics test loop (PLANDTL) facility. Previously, mainly the hydrodynamic phenomena of the wire-wrapped fuel bundle were analyzed, but the present study additionally included heat transfer analysis through conjugate heat transfer. The main purpose of the study was to benchmark the experimental data of the PLANDTL 37-pin wire-wrapped fuel bundle to investigate the heat transfer phenomena. In addition, the aim was to verify the accuracy of the RANS-based CFD analysis method using the STAR-CCM+ simulation software in comparison with the experimental data. The grid used for verification was an innovative grid system consisting of hexahedra using Fortran-based code. The development of the RANS-based CFD methodology included grid sensitivity analysis, turbulence model sensitivity analysis, and turbulent Prandtl number sensitivity analysis. Information on the temperature, mass flow rate, and area of the CFD results for each subchannel was provided for the top of the heated section and is expected to serve as a reference for future studies aiming to perform the validation and verification of a PLANDTL facility. In addition, the dependence of the peak temperature on the azimuth angle of each pin was analyzed.

97 MATHEMATICS AND COMPUTING↗

A Prototype Wire Position Monitoring System

The Wire Position Monitoring System (WPM) will track changes in the transverse position of LCLS Beam Position Monitors (BPMs) to 1{micro}m over several weeks. This position information will be used between applications of beam based alignment to correct for changes in component alignment. The WPM system has several requirements. The sensor range must be large enough so that precision sensor positioning is not required. The resolution needs to be small enough so that the signal can be used to monitor motion to 1{micro}m. The system must be stable enough so that system drift does not mimic motion of the component being monitored. The WPM sensor assembly consists of two parts, the magnetic sensor and an integrated lock-in amplifier. The magnetic sensor picks up a signal from the alternating current in a stretched wire. The voltage v induced in the sensor is proportional to the wire displacement from the center of the sensor. The integrated lock-in amplifier provides a DC output whose magnitude is proportional to the AC signal from the magnetic sensor. The DC output is either read on a digital voltmeter or digitized locally and communicated over a computer interface.

43 PARTICLE ACCELERATORS↗

Low Cost Hydrogen Storage at 875 Bar Using Steel Liners and Steel Wire Wraps

The Department of Energy’s (DOE) Fuel Cell Technologies Office (FCTO) within the Office of Energy Efficiency and Renewable Energy (EERE) supports research and development activities leading to the development of low-cost, high-pressure hydrogen storage systems for use in hydrogen refueling stations (forecourt). The specific goals of this project were to develop and produce a prototype of a pressure vessel to safely store gaseous hydrogen at 875 bar that meets the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Section VIII, Division 3 design code for service in hydrogen (Article KD-10) and meets the DOE storage tank cost target of <$1000/kg stored hydrogen (H 2 ). The pressure vessel designed and prototyped as part of this study utilizes a standard ASME approved, 406 mm diameter, 31.7 mm thick wall, and 9.14m long, liner with a capacity of 765 liters and rated for a pressure of up to 460 bar. The liner was wrapped with high strength steel wires to boost its pressure rating to 875 bars. The process of wrapping metal liners with a high strength steel wire, a WireTough patented technology, was first demonstrated on short cylinders that were 1.9 m long but of the same diameter and wall thickness as the 9.1 m long, 765 L cylinders. Subsequently, full length cylinders that were 9.14 m long were designed and certified under the applicable ASME Design Codes. Two prototype cylinders were wire wrapped to demonstrate the manufacturability. Following is a bulleted summary of the accomplishments of the project that ended on August 31, 2018.

25 ENERGY STORAGE↗

Bi-metallic Nanoparticle Synthesis for Advanced Manufactured Melt Wires

Science Undergraduate Laboratory Internship (SULI) Program Report: Additive manufacturing (AM) based on direct-write technologies has emerged as the predominant method for the fabrication of passive sensors for the harsh operating environments seen in a nuclear reactor. Through the modification of previous methods, Idaho National Laboratory and Villanova University have improved the synthesis process for AM feedstock, which will allow for the improvement of advanced nuclear sensors and instrumentation. A major part of this work includes the synthesis process of relevant AM compatible feedstock to support the development, fabrication, and testing of AM sensors for peak temperature detection. For this report, bismuth, bismuth/platinum, tin, tin/silver, tin/zinc, indium, and indium/silver bi-metallic nanoparticles were synthesized using the polyol method, which will enhance temperature sensitivity and allow for miniaturization. To characterize the synthesized nanoparticles, we used x-ray fluorescence to evaluate the elemental composition of the nanoparticles and differential scanning calorimetry and thermogravimetric analysis to determine the melting point and mass loss of the samples. Results show that bi-metallic nanoparticles are a viable option for the fabrication of high-resolution AM melt wires. The temperature sensitivity can be brought to within 5°C and melt wires can be fabricated that are in the micrometer scale. This will expand the range of irradiation experiments melt wires can be used for and the measured temperature will be significantly more accurate.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

(abstract) An All Sky Cirrus Confusion Noise Map for WIRE

The Wide Field Infrared Explorer (WIRE) is a Small Explorer (SMEX) satellite scheduled for launch in 1998 which will carry out a sky survey of at least 100 square degrees in the wavelength regions of 9-15(micro)m and 21-27(micro)m with spatial resolution of approximately 20 arcsec and sensitivity exceeding 0.6mJy. At this sensitivity level WIRE observations can be seriously affected by the confusion noise contribution from the infrared cirrus emission, so the WIRE survey must be planned with some knowledge of the expected level of cirrus confusion. Production of a cirrus confusion noise map with 0.5 degree resolution based on the spatial power spectral density of the cirrus emission in the IRAS ISSA data is in progess using the method described by Gauthier, et al. Spectrally resolved power spectra density data is obtained from the ISSA maps with a wavelet transform technique.

Wide Field Infrared Explorer WIRE infrared sky sur↗

Electrical and Thermal Characterization of 3D Printed Thermoplastic Parts with Embedded Wires for High Current-Carrying Applications

Fabrication of parts exhibiting multi-functionality has recently been complemented by hybrid polymer extrusion additive manufacturing in combination with wire embedding technology. While much mechanical characterization has been performed on parts produced with fused deposition modeling, limited characterization has been performed when combined electrical and thermal loads are applied to 3D printed multi-material parts. As such, this work describes the design, fabrication, and testing of 3D printed thermoplastic coupons containing embedded copper wires that carried current. An automated fabrication process was used employing a hybrid additive manufacturing machine that dispensed polycarbonate thermoplastic and embedded bare copper wires. Testing included AC and DC hipot testing as well as thermal testing on as-fabricated and heat treated coupons to determine the effect of porosity in the substrate. The heat-treated parts contained reduced amounts of porosity, as corroborated through scanning electron microscopy, which led to 50 % increased breakdown strength and 30 to 40 % increased heat dissipation capabilities. The results of this research are describing a set of design protocol that can be used as a guideline for 3D printed embedded electronics to predict the electrical and thermal behavior.

Hipot testing↗