SEARCH · Engineering Papers

Results for “Utility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

All sources NASA NTRS DOE OSTI

NASA NTRS2020

Huntsville Urban Development: Utilizing NASA Earth Observations to Evaluate Urban Tree Canopy and Land Surface Temperature for Green Infrastructure Development and Urban Heat Mitigation in Huntsville, Alabama

Huntsville, Alabama’s population has grown by approximately 11% since 2010, due in part to the city’s advancing engineering industry. Rapid urban growth negatively impacts the environment by decreasing tree canopy cover and increasing impervious surface cover, which can intensify the urban heat island effect. To examine the impacts of this urban growth on the environment, the team partnered with the City of Huntsville to utilize Landsat 5 Thematic Mapper (TM), Landsat 8 Operational Land Imager (OLI) and Thermal Infrared Sensor (TIRS), Terra Moderate Resolution Imaging Spectroradiometer (MODIS) and the International Space Station’s Global Ecosystems Dynamic Investigation (GEDI) and ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS). The team utilized these Earth observations in combination with ancillary datasets to create a suite of end products to assist in mitigating the effects of extreme heat due to urban expansion and tree canopy loss. Annual land surface temperature (LST) was calculated and land cover classes were derived through supervised and threshold classification methods to distinguish trees, other vegetation types, impervious surfaces, and water. From 2010 to 2019, LST increased approximately 4 °F for all census tracts within the city and the total amount of tree cover increased by approximately 3%. The findings will aid the city in future decision-making processes by indicating areas that would benefit from increased green infrastructure.

Greta Paris↗

NASA NTRSDate not supplied

In Situ Small Spacecraft Missions Utilizing Heatshield for Extreme Entry Environments Technology

There is considerable interest in utilizing Small Spacecraft beyond low Earth orbit. In November of 2018, successful data relay operations of the MarCO CubeSats during the entry, descent, and landing (EDL) of the Mars InSight mission showed the viability of using CubeSats for interplanetary missions. Additional testament to the promise of Small Spacecraft class rideshare missions is the upcoming Artemis-1 flight test that will launch thirteen 6U CubeSats, as well as the establishment of NASA’s SIMPLEx program which will conduct stand-alone planetary science missions that launch with a primary payload. It is anticipated that continued innovations in Small Spacecraft capabilities combined with small EDL systems will expand the range of potential missions to allow for in situ investigations. Recently, NASA invested in the development of a new, efficient and capable ablative thermal protection system (TPS), utilizing 3-D Weaving. The new dual layer TPS, Heatshield for Extreme Entry Environment Technology (HEEET), is tailorable, scalable, robust, mass efficient and capable of supporting in situ missions across the solar system. Combining the HEEET entry system with innovative Small Spacecraft technology will substantially expand the range of Small Spacecraft mission applications by offering the capability for high speed entry or aerocapture at destinations with atmospheres. This paper will describe the HEEET aeroshell system and highlight various mission concepts including a dual technology demonstration mission that is under development and other concepts to deliver instruments for planetary science.

Heatshield↗

NASA NTRS2021

Yonkers Urban Development: Utilizing NASA Earth Observations to Identify Environmental and Social Drivers of Urban Heat Vulnerability and Model Urban Cooling Interventions in Yonkers, New York

The City of Yonkers, New York, is located directly north of the Bronx in Westchester County and currently hosts a population of nearly 200,000. In response to increasing hot-weather episodes, the risk of heat-related illnesses and mortality is disproportionately affecting neighborhoods in Yonkers historically subjected to race-based housing segregation. NASA DEVELOP collaborated with Groundwork Hudson Valley to determine regions within Yonkers that are experiencing the most intense urban heat island effects, identify and rank sociodemographic and environmental determinants of increasing community-level vulnerability, map these vulnerabilities as a combined vulnerability index, complete a proximity analysis of walkability to local cooling centers and health facility locations, and model potential cooling strategies. The study area consisted of Yonkers, NY and the analyses used data from 2015-2020 (June through August). The project utilized NASA Earth observation products including Landsat 4 and 5 Thematic Mapper (TM), Landsat 7 Enhanced Thematic Mapper Plus (ETM+), Landsat 8 Operational Land Imager (OLI) and Thermal Infrared Sensor (TIRS), Terra Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER), and ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS). We assessed the benefits of different heat-mitigation scenarios by utilizing the Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST) urban cooling model. Results from these analyses can be used by Groundwork Hudson Valley, supporting the New York State’s Climate Safe Communities Certifiable Planning Actions, expanding knowledge on the relationship between historic redlining and environmental equity, and informing their Climate Safe Neighborhoods initiative to identify and prioritize mitigation efforts to abate the worst impacts of extreme heat.

Jillian Walechka↗

NASA NTRSDate not supplied

In-Situ Reaction Monitoring for Lunar Applications Utilizing a Single Quadrupole Residual Gas Analyzer

With a revived focus to create a permanent presence on the moon and in preparation for future Mars exploration ,it is imperative that all resources are utilized to their fullest potential.[1] In-Situ Resource Utilization (ISRU)will be critical for future mission success as it would enable independent operation of missions while minimally relying on the complex supply chain created between the Earth, moon and Mars.One of the most critical resources that have been identified for ISRU is the creation of liquid oxygen (LO2)for not only breathable air, but also for rocket propellant.On the moon and potentially Mars, one of the most O2rich resources is in the presence of regolith.[2],[3]Although there are numerous minerals within regolith and various processes to extract O2, this is not the scope of this poster

Thomas T Barnes III↗

NASA NTRSDate not supplied

Investigating the Applications of In-Situ Resource Utilization for Future Crewed Mars Missions

Several advancements are necessary before humans can safely explore Mars. One emerging strategy is In-Situ Resource Utilization (ISRU): the process of extracting raw materials found onsite and converting them into usable products to ensure a constant flow of vital resources and greatly reduce overall mission cost. Scientists must confirm the presence and accessibility of these resources for future crewed missions. Our team investigated the feasibility of ISRU in NE Syrtis, a region of Mars with varied geology, mineralogy, and hydrological history. NE Syrtis has abundant subsurface water and a diverse suite of mineral deposits including olivine, phyllosilicates, sulfates, and carbonates–all of which can be leveraged for fuel, medical supplies, and/or construction materials. We conceptualized a joint rover and helicopter expedition to analyze and sample these minerals over a two-year primary mission using Java Mission-planning and Analysis for Remote Sensing (JMARS), Planetary Data Systems (PDS), and Computer-Aided Design (CAD). We plotted a strategic traverse to regions of interest identified from remote sensing data and planned operations at each target. Our mission aimed to prepare for human presence on Mars by demonstrating the utility and viability of ISRU-focused operations.

Zahra M. Ronizi↗

NASA NTRSDate not supplied

An Overview of the Meteorological Instrumentation Utilized for the Design and Operations of Space Launch Vehicles

One of the first hurdles a space vehicle must overcome is the ability to successfully traverse Earth’s atmosphere. In order to achieve this goal, there must exist both climatological and real-time atmospheric data from the surface to the Karman line. The Natural Environments Branch at the National Aeronautics and Space Administration’s Marshall Space Flight Center utilizes both traditional and specialized meteorological instrumentation to aide in both the design and operations of launch vehicles. Weather balloons measuring thermodynamic and wind data from 0 - 70 kft are an example of the more traditional instrumentation. While the Tropospheric Doppler Radar Weather Profiler that measures winds from roughly 5 kft – 60 kft every five minutes is an example of a more specialized instrument. Other instruments include: 915 MHz Doppler Radar Wind Profilers, rain gauges, meteorological towers, lightning detection networks, Automated Weather Observing System stations, Mobile Launcher weather stations, and more. This presentation will give a high-level overview of which instruments are utilized, how the data are acquired, and how the data are ultimately used in design and/or operations.

Nathan L. Curtis↗

NASA NTRSDate not supplied

Analytical Modeling of Planetary Excavation for in Situ Resource Utilization

The space-faring capabilities of humans are dependent on the ability to interact with plan-etary surfaces safely and efficiently and utilize local re-sources. Since planetary regolith will be the primary feedstock for in situ resource utilization (ISRU) and infrastructure development activities [1,2], the site-specific geomechanical properties must be understood to optimize excavation operations [3]. Excavating planetary regolith is challenging due to its unique geomechanical properties, 1/6th G reduced gravity extreme conditions, and limited energy resources. Therefore, it is critical to develop technologies that reduce excavation force requirements and minimize tool path inefficiencies to save time and energy during planetary re-source acquisition and infrastructure development [3]. There have been several experimental investigations of methods to optimize planetary excavations [4,5], but none developed predictive capabilities. This abstract presents a simple analytical method that will be used to model laboratory and mission excavation data. Future work will build on the simple analytical method here to include high-fidelity numerical simulations of planetary excavation mechanics.

Regolith↗

NASA NTRSDate not supplied

Understanding and Utilizing PBL Height Data from Multiple Observing Systems in the GEOS System

The accuracy of PBL height simulation is a key issue in many applications including forecasting near surface meteorology and air quality, however, it is a very challenging problem due to the lack of not only comprehensive, global Planetary Boundary Layer (PBL) observations but also a strategy and infrastructure to utilize PBL height data from a variety of sensors. Following the designation of PBL as an incubation class observable in the 2017 Decadal Survey, the PBL Incubation Study Team Report [14] made clear that “a future global PBL observing system requires modeling and data assimilation as essential components.” There is an urgent need for global modeling development in order to utilize Program of Record (POR) observations, assess their impacts, and identify gaps to be filled by future PBL missions. Our overall objective is to develop PBL data assimilation capabilities in the NASA Global Earth Observing System (GEOS), focusing on PBL height from multiple observing systems, to support the assessment and use of future PBL observations. The NASA GEOS system is composed of the GEOS global atmospheric general circulation model (AGCM) and the atmospheric data assimilation system (ADAS). The PBL parameterizations include the “Lock” K-profile scheme driven by surface and cloud-top buoyancy fluxes ([4]), and the “Louis” local scheme for stable conditions based on the Richardson number ([5]). Above the mixed layer defined by the Lock surface plume, shallow cumulus convection is represented by the mass flux scheme of [9]. Additional parameterizations are summarized in [1]. The ADAS employs the hybrid 4D Ensemble- Variational (EnVar) configuration ([15]), with the ensemble providing flow-dependent background error covariance information. The resultant analysis increments are fed back to the forecast model through the 4D incremental analysis update (IAU) approach ([11]). In this study, PBL height data are being or have been generated from radiosondes, GNSS RO, satellite (CATS, CALIPSO and ICESat-2) and ground-based (MPLNET) lidars, and wind profiler. Investigations have been conducted to specify quality marks for PBL height retrievals for the data assimilation purpose. These PBL height data have different strengths and weaknesses ([2], [3], [6], [7], [8], [10]), and the satellite PBL height data provide better global coverage and complement in-situ PBL height data. Radiosondes offer high accuracy and in situ measurement of temperature and humidity profiles, but with poor spatio-temporal sampling. The in-situ observing systems like MPLNET and wind profiler provide long history of PBL height records at each station. The GNSS RO based PBL height is retrieved based on the sharp gradients in refractivity profile that represent the fine vertical structure of temperature and moisture changes above the PBL. However, not all RO refractivity profiles reach the surface depending on location and regime, and RO refractivity retrievals can be negatively biased below 2km. The PBL height data from satellite lidars provide high resolution along track PBL height retrievals, but over land they are affected by previous day convective PBL aerosol and strongly associated with mixing layer and retrievals cannot be made below thick, attenuating clouds. A successful assimilation of PBL height data requires a thorough understanding of the observing method and the retrieval algorithm for each observing system in order to use the PBL height data from multiple observing systems properly. Due to the sensitivity of PBL height data to the observing method and choice of algorithm, it is important to use a model definition appropriate for each observation type to compute differences between PBL height data and model PBL height (OmFs). The GEOS model currently includes two PBL height definitions suitable for direct comparison with observed PBL height, and additional definitions are being added in this study. Evaluation of different model PBL height definitions is underway. Meanwhile, efforts have been made in the GEOS data assimilation system to develop PBL height data assimilation capability. PBL height data can be assimilated using two different approaches. The traditional approach is to construct an observation operator and its tangent linear and adjoint, which link control variables to PBL height data from each observing system. This observation operator can be very complicated, e.g., the lidar-based PBL height observation operator includes the backscatter lidar forward observation operator, the algorithm to derive PBL height from attenuated total backscatter, interpolation, and calculations handling the mismatch between observed and model scales. The other approach is to augment PBL height to the control variable vector, and it is adopted in this study. The latter approach was also used in previous studies, e.g., the assimilation of PBL height data from radiosonde and aircraft in the Real Time Mesoscale Analysis (RTMA) system for a dispersion modelling study ([13]); the PBL height assimilation study using lidar PBL height data at Greensburg, Kansas for a field campaign ([12]). The PBL height assimilation from multiple observing systems in this study allows us to take advantage of the diverse PBL height data that provide much better global coverage collectively under different meteorological conditions and with different temporal and spatial scales. As all the PBL heights are tightly coupled with the PBL thermodynamic variables, the strong correlations, which are provided by the 4D ensemble forecast, enable PBL height data from various sources to interact and combine coherently and provide additional information for PBL temperature and moisture fields. The results of comparisons among PBL height data from different sources and the evaluation of the model PBL height definitions with the PBL height data will be presented, and the PBL height data synergy strategies and preliminary results will also be discussed at the conference.

Y. Zhu↗

NASA NTRSDate not supplied

Advancements to Wind Tunnel Testing at the Marshall Space Flight Center Aerodynamic Research Facility by the Utilization of Additively Manufactured Models

In recent years, the Aerodynamic Research Facility (ARF) at NASA’s Marshall Space Flight Center (MSFC) has heavily utilized additive manufacturing (AM) technology for the manufacturing of models for aerodynamic testing in the 14 x 14-inch Trisonic Wind Tunnel (TWT). This process change resulted in speed and cost improvements to the design and manufacture of model parts, which has provided the capability to perform parametric tests at a rapid pace with high fidelity models that are more finely detailed than previously tested. This paper outlines the model design and fabrication workflow of the ARF and the improvements made, focusing specifically on two vehicles tested. First, identical traditionally machined and AM models of a test missile configuration were tested to isolate effects of differences in manufacturing. Second, a high-fidelity model of NASA’s Space Launch System (SLS) was tested to investigate improvements in data quality possible by utilizing AM on small-scale wind tunnel tests. This paper also discusses detailed model inspections and data comparisons that were performed to prove the reliability of data across the TWT’s entire Mach range.

Ryan C Connelly↗

NASA NTRSDate not supplied

Analysis of a Landing System for Planetary Payloads Utilizing Passive Energy Absorbing Composite Structure

Delivery of a payload from space to a planetary surface currently requires the development of an application specific landing system to protect the payload from forces imparted during impact with the planet surface. Often, active energy attenuating systems such as retro-rockets, deployable parachutes, and airbags are utilized within these landing systems to reduce landing impact energy. Unfortunately, these active systems come at a cost; active energy attenuating systems are susceptible to system faults which may limit or completely negate their energy attenuating capability. Additionally, components needing to be stowed such as fuel, parachutes, and airbags increase design complexity, cost, and weight. To overcome these limitations, this study examines the potential of passive energy attenuation through energy absorbing structural design and composite materials to mitigate landing loads for small payload planetary delivery. Researchers at the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) have conducted extensive research into developing energy absorbing structures and components for the attenuation of impact energy under various loading conditions including aircraft crash and spacecraft impact. The current study leverages this research to design a lightweight planetary delivery system which utilizes unique outer mold line (OML) geometry and passive energy absorbing structural design to limit landing loads across potential planetary surface environments. The OML geometry is designed to control impact orientation and provide self-righting capabilities for slopped impact surfaces. The internal structure is composed of composite material structures arranged to provide energy absorption which is robust to impact angle and impact velocity. The developed planetary delivery design concept will be evaluated using finite element (FE) model analysis. Simulations of landing impacts with representative soil surface environments will be used to characterize the energy absorbing capabilities of the landing system. Sensitivity of predicted impact force to landing environment, impact angle, and impact velocity will be assessed to identify capabilities and limitations of the initial structural design. Results will be used to determine the feasibility of a lightweight composite structure to passively absorb landing energy for robust planetary payload delivery.

Crashworthiness↗

NASA NTRS2024

Hawai’i Climate: Utilizing NASA Earth Observations to Assess Thermal Stress Impacts on Coastal Hawaiian Fishponds

Hawaiian fishponds (loko i’a), ancient aquaculture systems created over 1500 years ago, historically served to harvest prized native fish species. Colonization-induced changes in land management have reduced active loko i’a from over 500 to ~20, destabilizing nearshore ecosystems and diminishing native Hawaiian cultural traditions. In recent decades, efforts to restore loko i’a have intensified as part of a broader emphasis on preserving Hawaiian cultural identity. Anthropogenic-induced climate change threatens these systems, particularly through the increase in frequency and magnitude of marine heatwaves. Though largely unexplored, these events are effectively studied utilizing remote sensing via Earth observations. Leveraging this technique enables autonomous extraction of water quality parameters to inform fishpond management. This study examined seven loko i’a across the main Hawaiian Islands (Hawai’i Island, Moloka’i, Maui, O’ahu, Kaua’i). Sea surface temperature and normalized difference chlorophyll index measurements were derived in fishponds utilizing Landsat 8 Thermal Infrared Sensor Thermal Infrared Sensor and Sentinel-2 MultiSpectral Instrument between 2013 to 2023, while regional patterns in temperature and chlorophyll-a were observed via Aqua’s Moderate Resolution Imaging Spectroradiometer (2002-2021). Employing these sensors, we focused analysis around the 2015 and 2019 marine heatwaves in the Pacific. We observed a heat stress gradient across the archipelago, creating thermally sheltered and unsheltered fishponds, yet identified no notable localized relationships between temperature and chlorophyll-a. Additionally, we applied pre-determined thermal maxima for culturally significant fish species (Striped Mullet: Mugil cephalus; Milkfish: Chanos Chanos) to assess historical habitat suitability within fishponds. While the direct impacts of marine heatwaves on loko i’a ecology are unknown, temperature patterns observed in this study are cause for concern.

Raz Wachtel↗

NASA NTRS2024

Northern Colorado Water Resources: Using Earth Observations to Assess Relationships between Snowpack and Wildfires for Water Utility Management

In recent years, wildfires in the western U.S. have increased in size, frequency, and severity. Colorado is no exception to this trend, with many recent wildfires raising concerns. The Cameron Peak and East Troublesome Fires, the two largest recorded wildfires in Colorado history, burned over 400,000 acres in 2020. Wildfires pose a significant threat to high-elevation ecosystems, especially in terms of disturbances to watershed resources. Colorado’s annual water supply is dependent upon the melt and runoff of high-elevation snowpack, thus understanding wildfire effects is crucial. This project partnered with Northern Water, a water management company in Colorado, to explore fire impacts on Colorado Front Range watersheds and water supply forecasts. We investigated the use of remote sensing to study the influences of wildfire on snow depth, as Northern Water had previously relied on field-based observations of snowpack for their water supply forecasts. This project utilized airborne LiDAR data from Airborne Snow Observatories, Inc., Landsat 8 OLI derived products, as well as in situ snow survey data from Colorado State University to assess and model changes in snowpack over time. We uncovered key drivers of change in snowpack such as burn severity and snow zone and created a random forest model to determine and investigate their relationships. Despite temporal data availability limitations, analysis also showed that remotely-sensed snow depth measurements were strongly correlated with in situ snow depth measurements, revealing the accuracy and feasibility of using remote sensing technologies to study landscape-scale snowpack characteristics for water utility management purposes.

airborne LiDAR↗

NASA NTRSDate not supplied

Demonstration of in-Situ Resource Utilization of Lunar Regolith for Plant Growing Systems Through Scaled Capillary Models

The development of reliable and bioregenerative crop growth production systems is vital for human exploration into deep space. As the National Aeronautics and Space Administration (NASA) prepares for the Artemis missions, scientists need to find a way to provide consistent and sufficient water delivery for all stages of a plant’s life cycle. NASA has been able to successfully model passive flow through felt material, to mimic the water uptake and transport through a plant, in microgravity. However, more studies need to be conducted to adapt the model for a substrate-based system and incorporate how flow will change during each stage of plant growth. For future missions, payload requirements to support crop production systems will need to be limited, leading to the use of available resources, such as lunar regolith. Although numerous lunar regolith simulants are commercially available, few have been evaluated for their suitability in agricultural applications. First, a base regolith simulant will need to be identified based on its physical and chemical properties. Then, additional amendments to improve the properties of the simulants to support plant growth will be identified. The design and composition of the substrate will be based on water transport requirements for different stages of plant growth. Scaled capillary models can be utilized to study surface-tension driven flows through various designer substrates to modify the physical properties of the selected regolith simulant. These models can accurately represent how flow will act in a reduced gravity environment, which can be used to design a full-scale facility for surface missions. This project will aid space researchers in the design of future crop production systems for surface missions by creating a refined model that can be used at all stages of plant growth and utilize in situ resources.

Fluids↗

NASA NTRSDate not supplied

Fundamental Research to Enable In-Situ Resource Utilization for NASA’s Artemis Program and Beyond Taking Place at The Glenn Research Center

In Situ Resource Utilization (ISRU) is regarded by many to be the key to future sustainability in space. The National Aeronautics & Space Administration’s (NASA) Space Technology Mission Directorate (STMD) recently published a list of ranked technology shortfalls. ISRU specific capabilities of ‘Extraction and separation of water from extraterrestrial surface material’, ‘Extraction and separation of oxygen from extraterrestrial surface material’, and ‘Produce propellants and mission consumables from extracted in-situ resources’ are within the top 80 shortfalls identified. A team of researchers and engineers at NASA’s Glenn Research Center (GRC) in Cleveland, Ohio, are performing fundamental research and technology maturation to ensure concepts and technologies are ready to support when the mission architecture is primed for ISRU to activate. Through analytical modeling and initial lab-scale testing, researchers are establishing concepts that mature to more sophisticated tests in relevant environments. Numerous studies are underway assessing fundamental behaviors of regolith during various steps of a conceptual ISRU production plant. This paper shares some of GRC’s recent advancements in ISRU research and technology development, in the hopes of providing valuable information to the ISRU community at large, spark ideas for future collaborative endeavors, as well as spur interest in utilizing some of the world-class expertise and facilities GRC has to offer.

ISRU↗

NASA NTRS2024

Terrestrial Proving Ground Capabilities Needed for Lunar In Situ Resource Utilization (ISRU) & Construction Concepts of Operation

Incorporating any new technology or system into a human exploration mission or architecture requires development well in advance of the mission to eliminate technology, cost, and schedule risk concerns. It is often stated that technologies need to be at a Technology Readiness Level (TRL) of 6, i.e. ‘system/subsystem model or prototype demonstration in a relevant environment (ground or space)’, by Authority To Proceed (ATP) or by the Preliminary Design Review (PDR) for the mission at the latest. There are two game changing capabilities for sustained human exploration of space that can have a significant effect on the overall exploration architecture and the technologies and systems included in the architecture. The first game changing capability, known as In Situ Resource Utilization (ISRU), involves the search for, acquisition, and processing of resources on the Moon and Mars into mission consumables and usable products, and the second is the ability to utilize space resources in the construction of roads, structures, and surface infrastructure. ISRU and surface construction capabilities have the potential to greatly reduce the cost and risk of human exploration while enabling sustained lunar surface and commercial operations. However, ISRU and surface construction systems are complex and must operate in extremely harsh environments, with abrasive regolith and pervasive dust, for long-periods of time, with potentially limited opportunities for maintenance and repair by humans. The complexity of these capabilities and operations also means that there are a limited number of companies that can design, build, and operate end-to-end systems on their own. The majority of the technologies being developed for these systems are by small companies and at the component or subsystem level. With the overarching strategy of the United States National Aeronautics and Space Administration (NASA) Space Technology Mission Directorate (STMD) to enable industry to implement ISRU and surface infrastructure for Artemis and space commercialization, it is therefore important to establish processes and capabilities to promote and foster collaborations among large and small companies involved in ISRU and surface infrastructure development. For ISRU and infrastructure systems and capabilities to be used in Artemis missions and future commercial lunar surface operations, a coordinated framework with virtual/physical integration and testing locations, or ‘Proving Grounds’, needs to be established and operated on a regular basis and open to all. This paper will discuss the ISRU and surface construction near and long-term concepts of operations, and review operations and lessons-learned from the previous ISRU analog field tests. From this information, requirements and capabilities will be proposed to support and enable the integration and testing of ISRU and construction systems with industry, academia, and international agencies, as well as what facilities and organizations could help establish these Proving Grounds.

ISRU↗

NASA NTRSDate not supplied

A Non-Nuclear, Solar Powered Mission to Uranus Utilizing the PowerSail - a Large Solar Sail with Embedded Solar Cells

Powering missions to the outer solar system is a significant challenge. These missions are typically powered by a Radioisotope Thermoelectric Generator (RTG). Though these sources provide stable power regardless of location in space, they are expensive to produce, difficult to integrate, and have both safety concerns as well as negative sociopolitical connotations. Perhaps most importantly, the availability of their fuel, plutonium-238, is scarce. Solar power is often considered a more attractive option. However, photovoltaic generation falls off at the distance from the sun squared. This drives the size of traditional solar generators to infeasible levels for deep space and their utilization at locations deeper the Jupiter is currently non-existent. Herein, a hypothetical solution, the PowerSail, and its application to a non-nuclear Uranus mission is presented. The PowerSail is a marriage of solar sails and thin-film solar cell assemblies. Herein the application of PowerSail spacecraft to a high priority science mission, the Applied Physics Laboratory’s Uranus Probe and Explorer, is studied. The overall mission design along with key subsystems design changes are discussed, ultimately showing that a PowerSail could be utilized as a non-nuclear option to reach destinations very deep in our solar system. Key needed technology developments to make the PowerSail and such a mission a reality are given.

John A. Carr↗

NASA NTRSDate not supplied

Airfoil Table Generation Comparison Utilizing XFOIL and UNS2D Flow Solvers

The flow solvers XFOIL and UNS2D were utilized within the airfoil table generator AFTGen to generate airfoil performance tables, and these results were compared to determine accuracy at low Mach numbers that may be relevant to Urban Air Mobiltiy (UAM) applications. Airfoil tables were generated for the NACA 0012 airfoil as well as a set of three asymmetrical airfoils developed in this study from which the rotor blade CSUS 001 was comprised. To determine which solver more accurately represented real-world aerodynamics, the airfoils were experimentally tested in the CSU 2-foot by 2-foot wind tunnel. The results of XFOIL and UNS2D were compared to the experimental results. It is important to note that due to differences in the Reynolds numbers between simulations and experimental testing, the magnitude of the section lift and drag coefficient varies between the two methods. However, observations on the accuracy of XFOIL and UNS2D could still be made based on the trends of the data. For the symmetrical NACA 0012 airfoil, it was found that XFOIL and UNS2D accurately predicted the trends of the section lift and drag coefficients. However, XFOIL predicted slightly lower section drag coefficients than UNS2D for the tested angles of attack. For the asymmetrical CSUS 001 airfoils, XFOIL could not predict a steady to decreasing section lift coefficient phenomenon at negative angles of attack observed in both the UNS2D and experimental results. Similarly, XFOIL was unable to predict an increased section drag coefficient at negative angles of attack for the CSUS 001 airfoils as observed in the UNS2D and experimental results. Additionally, 3D computational fluid dynamics was utilized through RotCFD to compare the performance of a rotor blade using the CSUS 001 airfoils versus a rotor blade using the NACA 0012 airfoil.

UAM↗

DOE OSTI2020

VOLTTRON™ Agent Development for Enabling Reactive Power Support of Non-Utility DERs by Integrating Transactive Energy Approach

To enable better voltage regulation in power systems with high penetration of photovoltaics (PV) and other distributed energy resources (DERs), future inverters are required to provide reactive power support to the grid in addition to providing real power generated by PV panels. This paper develops a framework that coordinates the support from DER-based inverters, which are grid-connected non-utility assets, by using a transactive energy approach. Results of the implementation demonstrate participation of DER-based inverters can be achieved by using the coordination between distributed controllers and a centralized controller. With the transactive energy approach, both the customer and utility can achieve benefits that meet their individual needs.

Kritprajun, Paychuda↗