Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ultrafast”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Ultrafast Laser-Excited Optical Emission of Xe under Loose-Focusing Conditions

The optical filament-based radioxenon sensing can potentially overcome the constraints of conventional detection techniques that are relevant for nuclear security applications. This study investigates the spectral signatures of pure xenon (Xe) when excited by ultrafast laser filaments at near-atmosphericpressure and in short and loose-focusing conditions. The two focusing conditions lead to laser intensity differences of several orders of magnitude and different plasma transient behavior. The gaseous sample was excited at atmospheric pressure using ∼7 mJ pulses with a 35 fs pulse duration at 800 nm wavelength. The optical signatures were studied by time-resolved spectrometry and imaging in orthogonal light collection configurations in the ∼400 nm (VIS) and ∼800 nm (NIR) spectral regions. The most prominent spectral lines of atomic Xe are observable in both focusing conditions. An on-axis light collection from an atmospheric air–Xe plasma mixture demonstrates the potential of femtosecond filamentation for the remote sensing of noble gases.

47 OTHER INSTRUMENTATION↗

Ultrafast Supercontinuum Spectroscopy of Carrier Multiplication and Biexcitonic Effects in Excited States of PbS Quantum Dots

We examine the population dynamics of multiple excitons in PbS quantum dots using spectrally resolved ultrafast supercontinuum transient absorption (SC-TA) measurements. We simultaneously probe the first three excitonic transitions. The transient spectra show the presence of bleaching of absorption for the 1S{sub h}-1S{sub e} transition, as well as transients associated with the 1P{sub h}-1P{sub e} transition. We examine signatures of carrier multiplication (multiple excitons arising from a single absorbed photon) from analysis of the bleaching features in the limit of low absorbed photon numbers (<N{sub abs} {approx} 10{sup -2}) for pump photon energies from two to four times that of the band gap. The efficiency of multiple-exciton generation is discussed both in terms of the ratio between early- to long-time transient absorption signals and of a broadband global fit to the data. Analysis of the population dynamics shows that bleaching associated with biexciton population is red shifted with respect to the single exciton feature, which is in accordance with a positive binding energy for the biexciton.

14 SOLAR ENERGY↗

Ultrafast Electron Diffraction: How It Works

A new technology at SLAC uses high-energy electrons to unravel motions in materials that are faster than a tenth of a trillionth of a second, opening up new research opportunities in ultrafast science.

74 ATOMIC AND MOLECULAR PHYSICS↗

R&D 100, 2016: Ultrafast X-ray Imager

The Ultrafast X-ray Imager is a solid-state camera capable of capturing a sequence of images with user-selectable exposure times as short as 2 billionths of a second. Using 3D semiconductor integration techniques to form a hybrid chip, this camera was developed to enable scientists to study the heating and compression of fusion targets in the quest to harness the energy process that powers the stars.

47 OTHER INSTRUMENTATION↗

Orientation-dependent enhanced ionization in acetylene revealed by ultrafast cross-polarized pulse pairs

We investigate the orientation dependence of enhanced ionization (EI) during strong-field-driven nuclear motion in acetylene (C 2 ⁢H 2 ). Here, we both initiate and probe molecular dynamics in acetylene with intense 6-fs cross-polarized pulse pairs, separated by a variable delay. Following multiple ionization by the first pulse, acetylene undergoes simultaneous elongation of the carbon-carbon and carbon-hydrogen bonds, enabling further ionization by the second pulse and the formation of a very highly charged state, [C 2 ⁢H 2 ] 6+ . At small interpulse delays (< 20 fs), this enhancement occurs when the molecule is aligned to the probe pulse. Conversely, at large delays (> 40 fs), formation of [C 2 ⁢H 2 ] 6+ occurs when the molecule is aligned to the pump pulse. By analyzing the polarization and time dependence of sequentially ionized [C 2 ⁢H 2 ] 6+ , we resolve two transient alignments that both contribute to a large increase in the multiple ionization yield. In conclusion, this cross-polarized pulse pair scheme uniquely enables selective probing of deeply bound orbitals, providing new insights on orientation-dependent EI in highly charged hydrocarbons.

Atomic & molecular clusters↗

Ultrafast and Highly Reversible Sodium Storage in Zinc-Antimony Intermetallic Nanomaterials

The progress on sodium-ion battery technology faces many grand challenges, one of which is the considerably lower rate of sodium insertion/deinsertion in electrode materials due to the larger size of sodium (Na) ions and complicated redox reactions compared to the lithium-ion systems. Here, it is demonstrated that sodium ions can be reversibly stored in Zn-Sb intermetallic nanowires at speeds that can exceed 295 nm s -1 . Remarkably, these values are one to three orders of magnitude higher than the sodiation rate of other nanowires electrochemically tested with in situ transmission electron micro­scopy. It is found that the nanowires display about 161% volume expansion after the first sodiation and then cycle with an 83% reversible volume expansion. Despite their massive expansion, the nanowires can be cycled without any cracking or facture during the ultrafast sodiation/desodiation process. Additionally, most of the phases involved in the sodiation/desodiation process possess high electrical conductivity. More specifically, the NaZnSb exhibits a layered structure, which provides channels for fast Na + diffusion. This observation indicates that Zn-Sb intermetallic nanomaterials offer great promise as high rate and good cycling stability anodic materials for the next generation of sodium-ion batteries.

Nie, Anmin↗

Hydrogen‐Bonded Polyimide/Metal‐Organic Framework Hybrid Membranes for Ultrafast Separations of Multiple Gas Pairs

Abstract Membranes have seen a growing role in mitigating the extensive energy used for gas separations. Further expanding their effectiveness in reducing the energy penalty requires a fast separation process via a facile technique readily integrated with industrial membrane formation platforms, which has remained a challenge. Here, an ultrapermeable polyimide/metal‐organic framework (MOF) hybrid membrane is reported, enabling ultrafast gas separations for multiple applications (e.g., CO 2 capture and hydrogen regeneration) while offering synthetic enhanced compatibility with the current membrane manufacturing processes. The membranes demonstrate a CO 2 and H 2 permeability of 2494 and 2932 Barrers, respectively, with a CO 2 /CH 4 , H 2 /CH 4 , and H 2 /N 2 selectivity of 29.3, 34.4, and 23.8, respectively, considerably surpassing the current Robeson permeability–selectivity upper bounds. At a MOF loading of 55 wt%, the membranes display a record‐high 16‐fold enhancement of H 2 permeability comparing with the neat polymer. With mild membrane processing conditions (e.g., a heating temperature less than 80 °C) and a performance continuously exceeding Robeson upper bounds for over 5300 h, the membranes exhibit enhanced compatibility with state‐of‐the‐art membrane manufacturing processes. This performance results from intimate interactions between the polymer and MOFs via extensive, direct hydrogen bonding. This design approach offers a new route to ultraproductive membrane materials for energy‐efficient gas separations.

Ma, Canghai↗

Design, Fabrication, and Screening of Environmental‐Thermal Barrier Coatings Prepared by Ultrafast High‐Temperature Sintering

Abstract The demand for more efficient gas turbines relies heavily on the development of new environmental‐thermal barrier coatings (ETBCs). However, there is still uncertainty about which alloys and composites will be used for the next generation of turbine blades, as well as the most promising coating materials. Herein, an ETBCs development strategy is presented by integrating the coating design, synthesis, and screening using an ultrafast high temperature sintering (UHS) technique to accelerate coating improvements. The initial basis for composition selection is their thermal expansion mismatch with the substrate alloys; for which a temperature‐dependent coefficient of thermal expansion database is created. By combining tape casting method with the UHS technique a high‐throughput synthesis of single and multi‐layer coatings are realized with different compositions, layer stacking sequences, and layer thicknesses. To evaluate the coatings, thermal cycling tests from room temperature to 1300 °C are conducted. The approach enabled coatings on objects with complex geometries, multi‐layer ETBCs, and porosity tailoring by using staged UHS that runs with different temperatures and durations. The fast iteration strategy is more cost‐effective for the screening of ETBCs compared to conventional methods and greater throughput which can be further extended for rapid optimization of other materials systems.

Xie, Hua↗

Ultrafast Spin-to-Charge Conversion at the Surface of Topological Insulator Thin Films

Strong spin–orbit coupling, resulting in the formation of spin–momentum–locked surface states, endows topological insulators with superior spin–to–charge conversion characteristics, though the dynamics that govern it have remained elusive. Here, an all–optical method is presented, which enables unprecedented tracking of the ultrafast dynamics of spin–to–charge conversion in a prototypical topological insulator Bi 2 Se 3 /ferromagnetic Co heterostructure, down to the sub–picosecond timescale. Compared to pure Bi 2 Se 3 or Co, a giant terahertz emission is observed in the heterostructure that originates from spin–to–charge conversion, in which the topological surface states play a crucial role. A 0.12 ps timescale is identified that sets a technological speed limit of spin–to–charge conversion processes in topological insulators. Additionally, it is shown that the spin–to–charge conversion efficiency is temperature independent in Bi 2 Se 3 as expected from the nature of the surface states, paving the way for designing next–generation high–speed optospintronic devices based on topological insulators at room temperature.

36 MATERIALS SCIENCE↗

Ultrafast Heterogeneous Nucleation Enables a Hierarchical Surface Configuration of Lithium‐Rich Layered Oxide Cathode Material for Enhanced Electrochemical Performances

Abstract Lithium‐rich layered oxides have attracted much attention for the high energy density, but they still suffer from cycling degradation and sluggish kinetic capability. In the present study, a novel modification of Li 1.143 Mn 0.544 Ni 0.136 Co 0.136 O 2 sphere cathode materials by a hierarchical surface configuration is proposed, which integrates advantages of dual oxide layers of both amorphous and nanocrystalline Al 2 O 3, as well as an inner spinel membrane. Mainly promoted by an ultrafast heterogeneous nucleation of Al(NO) 3 nanoseeds caused by huge solubility differences, it only takes several minutes for pretreatment. After common annealing at low temperature, the obtained material is capable to deliver a high discharge capacity of 296.3 mAh g −1 with initial Coulombic efficiency of 92.9% at 0.1 C rate, and maintain stable cycling at both 0.2 and 0.5 C rates. Besides, rate performances are also enhanced as a result of the superior interface gained after surface modification, which produces reduced polarization during cycling. Through comprehensive analyses, improved surface property and stability are confirmed as the key to these enhancements. This strategy is anticipated to inspire new modification designs in future high energy density cathode materials.

Guo, Haocheng↗

Rationally Engineered Vertically Aligned β ‐Ga 2− x W x O 3 Nanocomposites for Self‐Biased Solar‐Blind Ultraviolet Photodetectors with Ultrafast Response

Abstract With the astonishing advancement of present technology and increasing energy consumption, there is an ever‐increasing demand for energy‐efficient multifunctional sensors or transducers based on low‐cost, eco‐friendly material systems. In this context, self‐assembled vertically aligned β ‐Ga 2− x W x O 3 nanocomposite (GWO‐VAN) architecture‐assisted self‐biased solar‐blind UV photodetection on a silicon platform, which is the heart of traditional electronics is presented. Utilizing precisely controlled growth parameters, the formation of W‐enriched vertical β ‐Ga 2− x W x O 3 nanocolumns embedded into the W‐deficient β ‐Ga 2− x W x O 3 matrix is reached. Detailed structural and morphological analyses evidently confirm the presence of β ‐Ga 2− x W x O 3 nanocomposite with a high structural and chemical quality. Furthermore, absorption and photoluminescence spectroscopy explains photo‐absorption dynamics and the recombination through possible donor–acceptor energy states. The proposed GWO‐VAN framework facilitates evenly dispersed nanoregions with asymmetric donor energy state distribution and thus forms build‐in potential at the vertical β ‐Ga 2− x W x O 3 interfaces. As a result, the overall heterostructure evinces photovoltaic nature under the UV irradiation. A responsivity of ≈30 A/W is observed with an ultrafast response time (≈350 µs) under transient triggering conditions. Corresponding detectivity and external quantum efficiency are 7.9 × 10 12 Jones and 1.4 × 10 4 %, respectively. It is believed that, while this is the first report exploiting GWO‐VAN architecture to manifest self‐biased solar‐blind UV photodetection, the implication of the approach is enormous in designing electronics for extreme environment functionality and has immense potential to demonstrate drastic improvement in low‐cost UV photodetector technology.

Das, Debabrata↗

Tuning Ultrafast Photoinduced Strain in Ferroelectric-Based Devices

Ferroelectric materials exhibit coupled degrees of freedom and possess a switchable electric polarization coupled to strain, making them good piezoelectrics and enabling numerous devices including nonvolatile memories, actuators, and sensors. Moreover, novel photovoltaic effects are encountered through the interplay of electric polarization with the material optical properties. Consequently, light-induced deformation in ferroelectrics, or photostriction, combining photovoltaic and converse piezoelectric effects, is under investigation in the quest for multifunctional materials. Using time-resolved X-ray diffraction, the first control of ultrafast photoinduced strain is demonstrated through in situ tuning of the polarization state in ferroelectric-based devices. Both the magnitude and the sign of the photoinduced strain strongly depend on the transient photoinduced change of the internal electric field in the ferroelectric layer, and can be actively engineered to achieve two distinct remanent photostrictive responses. These results provide fundamental insight into light–matter interaction in ferroelectrics and exciting new avenues for materials functionality engineering.

36 MATERIALS SCIENCE↗

Ultrafast Activation and Tuning of Topological Textures in Ferroelectric Nanostructures

Polar topological textures are recently discovered in ultra–thin ferroelectrics, including stripe, labyrinth, or bubble states. Enabling to shape on–demand, these topologies herein can provide an original platform for potential applications. Here, using first–principle–based calculations, it is shown that THz electric field pulses are an efficient means for generating a plethora of topological states in ultrathin films made by a prototypical ferroelectric system, depending on the characteristics of these pulses and films. Consequently, these ultrafast electrical pulses in ultra–thin ferroelectrics offer key ingredients for mimicking neuronal and synaptic behaviors, including all–optical devices, and open a new avenue for topological objects to neuromorphic systems.

36 MATERIALS SCIENCE↗

Ultrafast Formation of Charge Transfer Trions at Molecular‐Functionalized 2D MoS 2 Interfaces

Abstract In this work, we investigate trion dynamics occurring at the heterojunction between organometallic molecules and a monolayer transition metal dichalcogenide (TMD) with transient electronic sum frequency generation (tr‐ESFG) spectroscopy. By pumping at 2.4 eV with laser pulses, we have observed an ultrafast hole transfer, succeeded by the emergence of charge‐transfer trions. This observation is facilitated by the cancellation of ground state bleach and stimulated emission signals due to their opposite phases, making tr‐ESFG especially sensitive to the trion formation dynamics. The presence of charge‐transfer trion at molecular functionalized TMD monolayers suggests the potential for engineering the local electronic structures and dynamics of specific locations on TMDs and offers a potential for transferring unique electronic attributes of TMD to the molecular layers.

Jing, Yuancheng↗

Ultrafast Formation of Charge Transfer Trions at Molecular‐Functionalized 2D MoS 2 Interfaces

In this work, we investigate trion dynamics occurring at the heterojunction between organometallic molecules and a monolayer transition metal dichalcogenide (TMD) with transient electronic sum frequency generation (tr-ESFG) spectroscopy. By pumping at 2.4 eV with laser pulses, we have observed an ultrafast hole transfer, succeeded by the emergence of charge-transfer trions. This observation is facilitated by the cancellation of ground state bleach and stimulated emission signals due to their opposite phases, making tr-ESFG especially sensitive to the trion formation dynamics. The presence of charge-transfer trion at molecular functionalized TMD monolayers suggests the potential for engineering the local electronic structures and dynamics of specific locations on TMDs and offers a potential for transferring unique electronic attributes of TMD to the molecular layers.

Time-resolved↗

Ultrafast Photoluminescence from the Core and the Shell in CdSe/CdS Dot‐in‐Rod Heterostructures

Abstract With an ultrafast time‐resolved photoluminescence system utilizing a Kerr gate, the time‐resolved photoluminescence of core and shell constituents within CdSe/CdS dot‐in‐rod heterostructures is studied as a function of heterostructure size. Measurements performed at low excitation fluence generating, on average, less than one exciton per nanorod, reveal photoluminescence from direct recombination of carriers in the CdS heterostructure rod with lifetime generally increasing from 0.4 ps to 1.3 ps as the rod length increases. Decay of the CdS rod photoluminescence is accompanied by an increase in emission from the CdSe core on comparable time scales, also trending towards larger values as the rod length increases. The observed kinetics can be explained without invoking a non‐radiative trapping mechanism. We also present alloying as a mechanism for enhancing electron confinement and reducing fluorescence lifetime at nanosecond time scales.

Diroll, Benjamin T.↗

Influence of Photoemission Geometry on Timing and Efficiency in 4D Ultrafast Electron Microscopy

Broader adoption of 4D ultrafast electron microscopy (UEM) for the study of chemical, materials, and quantum systems is being driven by development of new instruments as well as continuous improvement and characterization of existing technologies. Perhaps owing to the still-high barrier to entry, the full range of capabilities of laser-driven 4D UEM instruments has yet to be established, particularly when operated at extremely low beam currents (~fA). Accordingly, with an eye on beam stability, we have conducted particle tracing simulations of unconventional off-axis photoemission geometries in a UEM equipped with a thermionic-emission gun. Specifically, we have explored the impact of experimentally adjustable parameters on the time-of-flight (TOF), the collection efficiency (CE), and the temporal width of ultrashort photoelectron packets. The adjustable parameters include the Wehnelt aperture diameter (DW), the cathode set-back position (Ztip), and the position of the femtosecond laser on the Wehnelt aperture surface relative to the optic axis (Rphoto). Notable findings include significant sensitivity of TOF to DW and Ztip, as well as non-intuitive responses of CE and temporal width to varying Rphoto. As a means to improve accessibility, practical implications and recommendations are emphasized wherever possible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrafast study of phonon transport in isotopically controlled semiconductor nanostructures: Phonons in isotopically controlled multilayers

Isotopically modulated silicon and germanium multilayers are analyzed by means of femtosecond spectroscopy and pulsed X-ray scattering for determining thermal conductivity and phonon modes. Isotopic modulation decreases thermal conductivity stronger than expected from a band bending model in the coherent phonon transport regime, in particular for silicon. Femtosecond spectroscopy and X-ray scattering resolve zone-folded vibration modes, which are located at the edge of the new, smaller Brillouin zone due to the multilayer periodicity. These modes can contribute to the reduction of thermal conductivity by Umklapp processes within the zone-folded mini-bands. Color-coded increase in ultrafast X-ray scattering in vicinity to the mini-zone boundary of a germanium multilayer.

36 MATERIALS SCIENCE↗