Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ti”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Photometric observations of Mercury from Mariner 10

The elimination of the residual image problem which plagued previous Mariner imaging systems allowed photometry of moderately high quality to be carried out on Mercury by Mariner 10. The conclusions from the photometric analysis are as follows. To a surface resolution of 20 km, Mercury is covered with a dark fine-grained soil similar to the lunar regolith. No regions having anomalous polarization or color were discovered, which might have implied large amounts of metallic Fe or exposed bare rock. Photoclinometry suggests that the center of the Caloris Basin may be about 9 km below the outside rim. The heavily cratered plains have albedos of about 0.17, somewhat brighter than the lunar highlands. The albedos of the darker smooth plains and the interiors of bright fresh craters are systematically higher than their lunar counterparts. One consistent interpretation of the color and albedo relationships is that the dark smooth plains resemble the low-Ti, low-Fe lunar maria and that the crust is generally low in Ti, metallic Fe, and Fe(3+).

Hapke, B.↗

Friction and wear of titanium alloys and copper alloys sliding against titanium 6-percent-aluminum - 4-percent-vanadium alloy in air at 430 C

Experiments were conducted to determine the friction and wear characteristics of aluminum bronzes and copper-tin, titanium-tin, and copper-silver alloys sliding against a titanium-6% aluminum-4% vanadium alloy (Ti-6Al-4V). Hemispherically tipped riders of aluminum bronze and the titanium and copper alloys were run against Ti-6Al-4V disks in air at 430 C. The sliding velocity was 13 cm/sec, and the load was 250 g. Results revealed that high tin content titanium and copper alloys underwent significantly less wear and galling than commonly used aluminum bronzes. Also friction force was less erratic than with the aluminum bronzes.

Wisander, D. W.↗

Surface chemistry of selected lunar regions

A completely new analysis has been carried out on the data from the Apollo 15 and 16 gamma ray spectrometer experiments. The components of the continuum background have been estimated. The elements Th, K, Fe and Mg give useful results; results for Ti are significant only for a few high Ti regions. Errors are given, and the results are checked by other methods. Concentrations are reported for about sixty lunar regions; the ground track has been subdivided in various ways. The borders of the maria seem well-defined chemically, while the distribution of KREEP is broad. This wide distribution requires emplacement of KREEP before the era of mare formation. Its high concentration in western mare soils seems to require major vertical mixing.

Bielefeld, M. J.↗

Ion beam texturing

A microscopic surface texture is created by sputter etching a surface while simultaneously sputter depositing a lower sputter yield material onto the surface. A xenon ion beam source has been used to perform this texturing process on samples as large as three centimeters in diameter. Ion beam textured surface structures have been characterized with SEM photomicrographs for a large number of materials including Cu, Al, Si, Ti, Ni, Fe, Stainless steel, Au, and Ag. Surfaces have been textured using a variety of low sputter yield materials - Ta, Mo, Nb, and Ti. The initial stages of the texture creation have been documented, and the technique of ion beam sputter removal of any remaining deposited material has been studied. A number of other texturing parameters have been studied such as the variation of the texture with ion beam power, surface temperature, and the rate of texture growth with sputter etching time.

Hudson, W. R.↗

Preferential concentration of certain elements in smaller aerosols emitted from aircraft engines

Aerosols from aircraft engines were collected with an eight-stage cascade sampler for a period of 24 h. The aerosol samples from each stage were analyzed for their elemental composition using the proton-induced X-ray emission (PIXE) technique. Seventeen elements (Si, P, S, Cl, K, Ca, Ti, V, Fe, Ni, Cu, Zn, Br, Sr, Nb, Sn, and Pb) were positively identified and quantitated at each stage. Six elements (S, Ca, Fe, Zn, Sn, and Pb) showed a fractional concentration increase with decreasing aerosol size. Similar, but less well-defined, trends were also observed for V and Ni. Silicon and chlorine, on the other hand, showed an opposite trend. Neutron-activation analysis of bulk aerosol samples collected every 2 h over the same period showed a correlation between concentration of Si, Ca, V, Ti, Zn, Br, and Sn and the density of air traffic at the airport. Analysis of the aviation-fuel samples by PIXE indicates that major fractions of Pb, Sn, Br, Zn, Ni, Fe, V, Ca, and S observed in these aerosol studies come from the aircraft engine exhaust.

Jolly, R. K.↗

Amoeboid olivine aggregates in the Allende meteorite

Greyish-brown irregularly-shaped aggregates composed predominantly of olivine make up nearly 2% of the Allende meteorite by volume. Many of the aggregates are constructed of subspherical lumps of micron-sized crystals of olivine, pyroxene, nepheline and sodalite surrounded by coarser-grained olivine. Rarely, anorthite, spinel and perovskite are also present. The olivine ranges in composition from Fo64 to Fo99. Pyroxenes range from aluminous diopside to hedenbergite to very Al-rich and Ti-Al-rich varieties. The nepheline contains 1.6-2.4% K2O and 1.6-5.2% CaO but the sodalite is significantly poorer in these elements. The spinel contains 2.1-13.4% FeO. Textural information and oxygen isotopic data suggest that the aggregates are composed of primary, solid condensates from the solar nebula. The perovskite, spinel and Ti-Al-rich pyroxenes are the remains of high-temperature condensates, but the olivine compositions and the presence of feldspathoids indicate that some of the grains continued to react with the solar nebular vapor in the temperature range 500-900 K.

Grossman, L.↗

Mare basalt petrogenesis - A review of experimental studies

Experimental results relevant to the fundamental question of the origin of mare basalts are examined with particular reference to guidelines for an appropriate evaluation of experiments. The petrogenesis of mare basalts remains a controversial subject as no petrogenetic scenario has yet been able to satisfy all the geochemical and geophysical constraints. Several generalizations hold true if one accepts that high-pressure equilibria provide some useful but limited information on mare source regions in the lunar interior. Petrogenesis of lowand high-Ti suites is identified. If assimilative processes are involved in the petrogenesis of the high-Ti suite, the high-pressure experiments on the resultant hybrid liquids have little bearing on their origins.

Kesson, S. E.↗

Quaternary and quinary modifications of the eutectic superalloy gamma/gamma prime-delta

Quaternary modifications and quinary additions from the elements Co, Ti, Mo, W, Re, B, Si, and Ta to the baseline quaternary alloy gamma/gamma prime-delta Ni-19.7 at.% Nb-6.0 at.% Cr-2.5 at.% Al are examined for various concentrations. From modification studies five alloys were chosen for detailed mechanical property characterization: Ni-19.7 Nb-6.0 Cr-2.5 Al-1.0 W; Ni-19.7 Nb-6.0 Cr-2.5 Al-1.0 Mo; Ni-18.6 Nb-6.0 Cr-2.5 Al-0.87 Ti; Ni-20.2 Nb-6.0 Cr-2.5 Al-2.0 Co; and Ni-17.9 Nb-6.0 Cr-2.5 Al-3.0 Ta. It is shown that extensive alloying of the baseline quaternary alloy is possible for elements exhibiting a wide solubility range in both phases, and that limited substitution of W, Mo, Re, Si, and B is possible for elements with restricted solid solubility especially in the delta phase. Improvement of creep rupture strength and cyclic oxidation resistance at 1100 C is discussed.

Lemkey, F. D.↗

Observations of interstellar titanium toward 47 stars

Results are presented from photoelectric scans of the interstellar 3384-A line of Ti II obtained at a resolution of 3.7 km/s for 47 stars. Although the depletion of titanium from the interstellar gas is large and highly variable, its ratio to the depletion of interstellar calcium is relatively constant; titanium is less depleted than calcium by a factor of about four. A method for determining approximate electron densities from the Ca II and Ti II column densities is applied to 51 interstellar clouds.

Stokes, G. M.↗

Surface chemistry of selected lunar regions

A completely new analysis has been carried out on the data from the Apollo 15 and 16 gamma ray spectrometer experiments. The components of the continuum background have been estimated. The elements Th, K, Fe and Mg give useful results; results for Ti are significant only for a few high Ti regions. Errors are given, and the results are checked by other methods. Concentrations are reported for about sixty lunar regions; the ground track has been subdivided in various ways. The borders of the maria seem well-defined chemically, while the distribution of KREEP is broad. This wide distribution requires emplacement of KREEP before the era of mare formation. Its high concentration in western mare soils seems to require major vertical mixing.

Bielefeld, M. J.↗

Cross sections for charge transfer between mercury ions and other metals

Cross sections for charge transfer between several ions and metals of interest to the NASA electro propulsion program have been measured. Specifically, the ions considered were Hg(+), Xe(+) and Cs(+) and the metals Mo, Fe, Al, Ti, Ta, and C. Measurements were made in the energy regime from 1 to 5,000 eV. In general, the cross sections for charge transfer were found to be less than 10 to the minus 15 power sq cm for most processes over the total energy range. Exceptions are Hg(+) in collision with Ti and Ta. The results obtained for each reaction are given in both graphical and numerical form in the text. For quick reference, the data at several ion velocities are condensed into one table given in the summary.

Vroom, D. A.↗

A fundamental approach to adhesion: Synthesis, surface analysis, thermodynamics and mechanics

The ability of SEM/EDAX to determine the physical and chemical composition of very small areas was used to study several diverse types of samples representative of NASA-LaRC technology. More systematic investigation was carried out on differences in the results of grit-blasting Ti 6-4 adherends and the presence of extraneous elements, primarily silicon, in some polymer/HT-S fiber composites. Initial results were obtained from a fractured (ILS) short-beam shear specimen, and from Ti 6-4 alloy, before and after a proprietary Boeing anodizing surface preparation for adhesive bonding. Photomicrographs and EDAX spectra were also obtained from new, fractured lap shear strength specimens that employed PPQ and LARC-13 adhesives.

Dwight, D. W.↗

Absolute oscillator strengths for the iron group - A correction to the data of Warner for the second spectra and a comment on some of the semiempirical results of Kurucz and Peytremann

It has already been shown that the Fe II absolute oscillator strengths (f-values) measured by Warner (1967) contain a systematic error, the magnitude of which depends on the energy of the transition's upper level. The present paper demonstrates that this error affects all of Warner's oscillator strengths for the second spectra of the iron group and develops a correction formula for Warner's results. A comparison of the corrected f-values with other measured f-values for Ti II, V II, and Fe II indicates that the correction improves the usefulness of Warner's data and that the corrected f-values have no large systematic dependence on wavelength, level energy, or line strength. Solar abundances for iron-group elements computed using the original and corrected f-values are compared with recently suggested abundances, and it is found that the corrected f-values yield more consistent results. Semiempirical oscillator strengths calculated by Kurucz and Peytremann (1975) for Fe I, Ti II, and V II are also compared with measured data to evaluate the accuracy of the calculations. It is found that the absolute scales of these results are roughly correct, but some of them are subject to very large errors.

Smith, P. L.↗

Measurements of the reaction e/+/e/-/ yielding gamma-gamma at center-of-mass energies in the range 6.2-7.4 GeV

The cross section for the pair-annihilation reaction e(+)e(-) yields gamma-gamma were measured at center-of-mass energies in the range 6.2-7.4 GeV and at production angles close to 90 deg. The experimental apparatus consisted of two identical spectrometers which were set to view the luminous region at SPEAR-II from opposite directions at an azimuthal angle of 45 deg. In each spectrometer there was a NaI(TI) crystal 20 radiation lengths thick and 30 in. in diameter to measure the gamma-ray energies. Annihilation events were detected by an electronic trigger which required only the observation in coincidence of more than 0.2 GeV in each NaI(TI) crystal within + or - 15 nsec of the crossing beams. The observed rates of pair-annihilation events were found to be in agreement with those expected from quantum electrodynamics (QED) at all the center-of-mass energies used.

Hilger, E.↗

Lunar resources and their utilization

Lunar surface materials offer a source of raw materials for space processing to produce structural metals, oxygen, silicon, glass, and ceramic products. Significant difference exist, however, between lunar surface materials in the highlands and those in the maria. In the highlands the soil depth is at least an order of magnitude greater, the Al:Fe ratio is ten times greater, the content of plagioclase as a source of clear glass is three times as great, and the content of Ti is at least an order of magnitude lower. Evaluation of the extractive metallurgy and chemical operations associated with carbothermic and silicothermic refinement of lunar regolith suggests that Fe, Al, Si, Mg and probably Ti, Cr and Mn can be recovered, while oxygen is produced as a by-product. A conservative plant design yields its own weight in oxygen, silicon, and structural metals in less than six days. Power requirements for a throughput of 300,000 tons per year is less than 500 megawatts. The processing is done more economically in space than on the lunar surface.

Phinney, W. C.↗

The surface chemical composition of lunar samples and its significance for optical properties

The surface Fe, Ti, Ca, and Si concentrations in a variety of soil and rock samples from all the Apollo sites are determined using an Auger spectrometer plus a single-pass cylindrical-mirror analyzer with a standard 15-stage BeCu electron multiplier. It is found that there are no great differences between the surface and bulk concentrations of any of the four elements in the rock samples, but the surface Fe and Ti concentrations in soil samples are higher than the bulk concentrations. Results are also reported for solar-wind simulation experiments in which a pulverized rock sample was bombarded with 2-keV alpha-particles corresponding to about a 30,000-yr dose of the solar-wind proton component. These results indicate that the chemical change induced on the surface of a rock powder by positive-ion bombardment is similar to the change from bulk to surface chemical composition in lunar soil samples. A clear correlation is observed between the surface Fe concentration and albedo of the soil samples.

Gold, T.↗

Mare basalt genesis - A cumulate-remelting model

In the framework of the cumulative-remelting model of lunar evolution, high-Ti basalts can be produced by extensive melting of a late-stage cumulate consisting of ilmenite-plagioclase-clinopyroxene-olivine at shallow depths immediately beneath about 60 km thick plagioclase-rich crust. Low-Ti mare basalts can be derived by small degrees of partial melting of an earlier cumulate containing mainly olivine-clinopyroxene-orthopyroxene with minor plagioclase or spinel at greater depth.

Shih, C.-Y.↗

Surface chemistry of selected lunar regions

A completely new analysis has been carried out on the data from the Apollo 15 and 16 gamma-ray spectrometer experiments. The components of the continuum background have been estimated. The elements Th, K, Fe, and Mg give useful results; for Ti are significant only for a few high-Ti regions. Errors are given, and the results are checked by other methods. Concentrations are reported for about 60 lunar regions; the ground track has been subdivided in various ways. The borders of the maria seem well-defined chemically, while the distribution of KREEP is broad. This wide distribution requires emplacement of KREEP before the era of mare formation. Its high concentration in western mare soils seems to require major vertical mixing.

Bielefeld, M. J.↗