Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Synchronization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Synchronous Separation, Seaming, Sealing and Sterilization (S4) using Brazing for Sample Containerization and Planetary Protection

The return of samples back to Earth in future missions would require protection of our planet from the risk of bringing uncontrolled biological materials back with the samples. This protection would require “breaking the chain of contact (BTC)”, where any returned material reaching Earth for further analysis would have to be sealed inside a container with extremely high confidence. Therefore, the acquired samples would need to be contained while destroying any potential biological materials that may contaminate the external surface of the container. A novel process that could be used to contain returning samples has been developed and demonstrated in a quarter scale size. The process consists of brazing using non-contact induction heating that synchronously separates, seams, seals and sterilizes (S4) the container. The use of brazing involves melting at temperatures higher than 500°C and this level of heating assures sterilization of the exposed areas since all carbon bonds (namely, organic materials) are broken at this temperature. The mechanism consists of a double wall container with inner and outer shells having Earth-clean interior surfaces. The process consists of two-steps, Step-1: the double wall container halves are fabricated and brazed (equivalent to production on Earth); and Step-2 is the S4 process and it is the equivalent to the execution on-orbit around Mars. In a potential future mission, the double wall container would be split into two halves and prepared on Earth. The potential on-orbit execution would consist of inserting the orbiting sample (OS) container into one of the halves and then mated to the other half and brazed. The latest results of this effort will be described and discussed in this manuscript.

Salazar, Eduardo↗

Estimation of Permanent Magnet Synchronous Motor Parameters using a Linear Unknown Input Interval Observer

This paper develops and evaluate a technique to estimate the speed and unknown load torque of a permanent magnet synchronous motor (PMSM). An interval unknown input observer (UIO) for linear time-invariant (LTI) systems is designed and utilized to estimate the PMSM parameters. Interval UIOs are advantageous as they allow for the estimation of both states and unknown inputs, while accounting for varying uncertainty sources, such as model and measurement uncertainties inherent in dynamic systems and processes. First, the nonlinear PMSM model is linearized to transform it to a suitable form for application of the linear interval UIO. Then, the interval UIO is applied to jointly estimate the motor speed and the unknown load torque disturbance. Assuming that the measurement noise and disturbances are bounded, lower and upper bounds are first computed for the unmeasured state (motor speed) and then for the unknown input (load torque). The proposed approach and its limitations are demonstrated for the nonlinear PMSM model derived from its equivalent electrical circuit.

Elinirina I Robinson↗

Free-space Forwarded-pump Entanglement Source Synchronization

We investigate entanglement source synchronization using a forwarded-pump signal sent over a 3.2-km free-space retro-reflected link. Results show sub-picosecond alignment between the sources. The paper considers several fundamental and practical aspects of this approach.

quantum entanglement↗

Discovery Synchronization Service (DSS) for UAM

NASA's ATM-X UAM Subproject recently completed the “X4 Strategic Conflict Management Simulation” with seven NC-1 airspace partners to develop and test initial UAM airspace management capabilities, including the Provider of Services for UAM (PSU), to enable strategic conflict management of UAM operations. The simulation environment leveraged the notional architecture from FAA NextGen UAM ConOps v1.0 and used technologies developed as part of UTM standards and applied them to UAM. One of the main technologies used was the Discovery and Synchronization Service (DSS) and some gaps in applying it to UAM were identified during X4. In this Technical Interchange Meeting (TIM), we will share the technical findings from the simulation and welcome industry feedback.

UAM↗

Analytical Design and Performance Estimation Methods for Aircraft Permanent Magnet Synchronous Machines

The design of an electric motor drivetrain is a complex multiphysics problem. Low fidelity motor drivetrain sizing can be a key tool in the design cycle of an electric motor drivetrain and for system level studies of aircraft configurations. However, low fidelity sizing can lead to misleading results if all the physics involved in a motor design are not properly accounted for. This paper provides details on modeling approaches for initial design and sizing of permanent magnet synchronous electric machines. The goal of this paper is to provide the reader an understanding of the key principles of motor design and some modeling approaches to perform initial sizing of an electric motor and its inverter.

Thomas F. Tallerico↗

Utilizing Libya-4 to Intercalibrate Overlapping Sensors in the Same Sun-Synchronous Orbit

The NASA CERES observed SW and LW broadband fluxes are utilized by the climate community for monitoring the Earth’s energy imbalance and for climate model validation. The SNPP and NOAA20 CERES instruments and associated VIIRS imagers were launched into the same 1:30 PM mean local time sun-sun-synchronous orbits as well as the future NOAA22 Libera broadband instrument and VIIRS imager. The overlapping sensor records need to be intercalibrated to enable consistent broadband fluxes and imager cloud retrievals. The overlapping satellites are typically placed a half an orbit apart, thus preventing any simultaneous nadir overpass (SNO) events required for time-matched inter-calibration strategies. A Pseudo Invariant Calibration Site (PICS), such as Libya-4, can provide overlapping sensor radiometric scaling factors without the use of SNOs. The clear-sky Libya-4 observed radiances were characterized both spectrally and angularly and corrected for atmospheric effects. The Libya-4 natural variability was found to be consistent across the CERES and VIIRS records. This fact reveals that the sensor onboard calibration anomalies are smaller than the Libya-4 natural variability. By mitigating the Libya-4 natural variability will reduce the radiometric scaling factor uncertainty needed to provide both broadband flux and cloud retrieval continuity across the overlapping sensor records.

D R Doelling↗

Discovery and Synchronization Service Architectural Notes

This is a short architectural note for a critical component of safely scaling drone operations. The primary motivation for this note is to collect language and terminology around the Discovery and Synchronization Service (DSS) as it is currently implemented for Uncrewed Aircraft System (UAS) Traffic Management. The major driver for this document was frequent miscommunication about DSS. Often there have been multiple informed and invested stakeholders in the same room making statements about “multiple DSSs” and each of them meaning something slightly different.

uas traffic management↗

Inter-Calibrating the CERES SW Instrument Fluxes Using Deep Convective Clouds(DCC) Within the Same Sun-Synchronous Orbit

The NASA CERES EBAF product provides the scientific community observed TOA fluxes to monitor the Earth’s energy imbalance and to validate climate models. To provide a seamless EBAF 24-year record, the CERES instrument calibration must be stable and consistent across satellite records. Once the Terra and Aqua spacecraft are decommissioned at the end of 2025, the CERES project will rely on CERES instrument observations on the SNPP and NOAA-20 1:30 PM sun-synchronous orbits. The SNPP and NOAA-20 satellite orbit placement will prevent any time matched observations for inter-calibration efforts. The future Libera instrument, which will continue the CERES record and scheduled for launch in 2028 onboard the NOAA-22 satellite, will also need to be inter-calibrated without the aid of time-matched observations. Deep convective clouds (DCC) are the most Lambertian, brightest, tropical Earth invariant targets located at the tropopause making them ideal to radiometrically scale the CERES SW observed radiance to a common reference. The SNPP, NOAA-20 and future NOAA-22 satellites are in the same 16-day repeatable orbits, allowing the DCC targets to be observed with the same angular configuration. The empirically derived SNPP CERES SW channel Bidirectional Reflectance Distribution Function (BRDF) can be easily be applied to the NOAA-20 CERES SW channel radiances since they observe the nearly the same DCC systems. The DCC BRDF corrected radiances are analyzed collectively into radiance probability distribution functions (PDF). By comparing the PDF statistics, the SNPP and NOAA-20 CERES SW channel can be inter-calibrated. The inter-calibration coefficients are validated with the CERES instrument calibration team coefficients to optimize the methodology.

David Doelling↗

A Test Of Precision GPS Clock Synchronization

This paper will describe tests of precision GPS time transfer using geodetic-quality TurboRogue receivers. The GPS data are processed with the GIPSY-OASIS II software, which simultaneously estimates the GPS satellite orbits and clocks, receiver locations and clock offsets, as well as other parameters such as earth orientation.

GPS GPS Clock Synchronization↗