Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “State Estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Nonhuman biota dose rate estimation from liquid effluent releases during normal operations of light water reactors using the LADTAP II computer code

Here, the LADTAP II computer code was used to estimate the dose rates to seven nonhuman biota (fish, algae, invertebrate, muskrat, raccoon, heron, and duck) from liquid effluent releases during the normal operations of new light water reactor facilities in the United States. The estimated dose rates to nonhuman biota depended on the nuclear power plant design but were orders of magnitude less than the ‘derived consideration reference levels’ (DCRL) in International Commission on Radiological Protection (ICRP) Publication 108. The estimated dose rates were at least three orders of magnitude lower than the guideline values identified by the International Atomic Energy Agency (IAEA) and the National Council on Radiation Protection and Measurements to cause observable changes in populations of biota. Radionuclides that contributed most of the dose rates for seven nonhuman biota depended on the nuclear power plant design. The differences in the estimated dose rates to seven nonhuman biota calculated from the default bioaccumulation factors used in the LADTAP II computer code and the dose rates calculated from the concentration ratios of radionuclides in the IAEA Technical Report Series (TRS) wildlife handbook were less than one order of magnitude for most default biota in LADTAP. The concentration ratios for some radionuclides in liquid effluent releases from nuclear power plant designs that contributed more than 5% of the internal dose rates for invertebrates (P, and Ru) and algae (La and Pr) were not available in the IAEA TRS wildlife handbook.

54 ENVIRONMENTAL SCIENCES↗

Cluster-continuum quantum mechanical models to guide the choice of anions for Li{sup +}-conducting ionomers

A quantum-mechanical investigation on Li poly(ethylene oxide)-based ionomers was performed in the cluster-continuum solvation model (CCM) that includes specific solvation in the first shell surrounding the cation, all surrounded by a polarizable continuum. A four-state model, including a free Li cation, Li{sup +}-anion pair, triple ion, and quadrupole was used to represent the states of Li{sup +} within the ionomer in the CCM. The relative energy of each state was calculated for Li{sup +} with various anions, with dimethyl ether representing the ether oxygen solvation. The population distribution of Li{sup +} ions among states was estimated by applying Boltzmann statistics to the CCM energies. Entropy difference estimates are needed for populations to better match the true ionomer system. The total entropy change is considered to consist of four contributions: translational, rotational, electrostatic, and solvent immobilization entropies. The population of ion states is reported as a function of Bjerrum length divided by ion-pair separation with/without entropy considered to investigate the transition between states. Predicted concentrations of Li{sup +}-conducting states (free Li{sup +} and positive triple ions) are compared among a series of anions to indicate favorable features for design of an optimal Li{sup +}-conducting ionomer; the perfluorotetraphenylborate anion maximizes the conducting positive triple ion population among the series of anions considered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bayesian Structural Time Series for Behind-the-Meter Photovoltaic Disaggregation

Distributed photovoltaic (PV) generation often occurs ``behind the meter": a grid operator can only observe the net load, which is the sum of the gross load and distributed PV generation. This lack of observability poses a challenge to system operation at both bulk level and distribution level. The lack of real-time or near-future disaggregated estimates of gross load and PV generation will lead to over scheduling of energy production and regulation reserves, reliability constraints violations, wear and tear of controller devices, and potentially cascading failures of a system. In this paper we propose the use of a Bayesian Structural Time Series (BSTS) model with local solar irradiance measurements to disaggregate the summed PV generation and gross load signals at a downstream measurement site. BSTSs are a highly expressive model class that blends classic time series models with the powerful Bayesian state space estimation framework. Disaggregation is done probabilistically, which automatically quantifies the uncertainties of the estimated PV generation and gross load consumption. Depending on the data availability in real-time, it can be used to disaggragate PV and gross load at customer site, or can be used at the feeder level. In this paper, we focus on solving the problem at feeder level. We compare the performance of a BSTS model as well as a handful of state-of-the-art methods on a Pecan Street AMI dataset, using the National Solar Radiation Database (NSRDB) to estimate local irradiance.

bayesian structural time series↗

A phononic interface between a superconducting quantum processor and quantum networked spin memories

We introduce a method for high-fidelity quantum state transduction between a superconducting microwave qubit and the ground state spin system of a solid-state artificial atom, mediated via an acoustic bus connected by piezoelectric transducers. Applied to present-day experimental parameters for superconducting circuit qubits and diamond silicon-vacancy centers in an optimized phononic cavity, we estimate quantum state transduction with fidelity exceeding 99% at a MHz-scale bandwidth. By combining the complementary strengths of superconducting circuit quantum computing and artificial atoms, the hybrid architecture provides high-fidelity qubit gates with long-lived quantum memory, high-fidelity measurement, large qubit number, reconfigurable qubit connectivity, and high-fidelity state and gate teleportation through optical quantum networks.

47 OTHER INSTRUMENTATION↗

Kinematically enhanced interpolating operators for boosted hadrons

We propose to use interpolating operators for lattice quantum chromodynamics calculations of highly boosted pions and nucleons with kinematically enhanced ground-state overlap factors at large momentum. Because this kinematic enhancement applies to the signal but not the variance of the correlation function, these interpolating operators can achieve better signal-to-noise ratios at large momentum. We perform proof-of-principle calculations with boosted pions and nucleons using close-to-physical and larger quark masses to explore the utility of our proposal. Results for effective energies and matrix elements, as well as Lanczos ground-state energy estimators, are consistent with theoretical expectations for signal-to-noise improvement at large momenta.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Estimated Water Flows in 2005: United States

A flow chart depicting water use in the United States has been constructed from publicly available data and estimates of water use patterns. Approximately 410,500 million gallons per day of water are managed for use in farming, power production, residential, commercial and industrial applications. Water is obtained from four major resource classes: fresh surface-water, saline (ocean) surface-water, fresh groundwater and saline (brackish) groundwater. Water that is not consumed or evaporated during its use is returned to surface bodies of water. The flow chart serves as a compact “visual atlas” that contributes to a comprehensive “systems view” of national water resources, use and disposition.

54 ENVIRONMENTAL SCIENCES↗

Valley Stoner instability of the composite Fermi sea

We study two-component electrons in the lowest Landau level at total filling factor ν T = 1/2 with anisotropic mass tensors and principal axes rotated by π/2 as realized in aluminum arsenide (AlAs) quantum wells. Combining exact diagonalization and the density matrix renormalization group we demonstrate that the system undergoes a quantum phase transition from a gapless state in which both flavors are equally populated to another gapless state in which all the electrons spontaneously polarize into a single flavor beyond a critical mass anisotropy of m x /m y ~7. We propose that this phase transition is a form of itinerant Stoner transition between a two-component and a single-component composite Fermi sea states and describe a set of trial wave functions which successfully capture the quantum numbers and shell filling effects in finite size systems as well as providing a physical picture for the energetics of these states. Our estimates indicate that the composite Fermi sea of AlAs is the analog of an itinerant Stoner magnet with a finite spontaneous valley polarization. Here, we pinpoint experimental evidence indicating the presence of Stoner magnetism in the Jain states surrounding ν = 1/2.

2-dimensional systems↗

Sequential ensemble-based optimal design for parameter estimation

The ensemble Kalman filter (EnKF) has been widely used in parameter estimation for hydrological models. The focus of most previous studies was to develop more efficient analysis (estimation) algorithms. On the other hand, it is intuitively understandable that a well-designed sampling (data-collection) strategy should provide more informative measurements and subsequently improve the parameter estimation. In this work, a Sequential Ensemble-based Optimal Design (SEOD) method, coupled with EnKF, information theory and sequential optimal design, is proposed to improve the performance of parameter estimation. Based on the first-order and second-order statistics, different information metrics including the Shannon entropy difference (SD), degrees of freedom for signal (DFS) and relative entropy (RE) are used to design the optimal sampling strategy, respectively. The effectiveness of the proposed method is illustrated by synthetic one-dimensional and two-dimensional unsaturated flow case studies. It is shown that the designed sampling strategies can provide more accurate parameter estimation and state prediction compared with conventional sampling strategies. Optimal sampling designs based on various information metrics perform similarly in our cases. Furthermore, the effect of ensemble size on the optimal design is also investigated. Overall, larger ensemble size improves the parameter estimation and convergence of optimal sampling strategy. Although the proposed method is applied to unsaturated flow problems in this study, it can be equally applied in any other hydrological problems.

54 ENVIRONMENTAL SCIENCES↗

Transactive Electric Water Heater Agent: Design and Performance Evaluation

Electric water heaters (EWHs) are usually equipped with inbuilt thermostats to measure water temperature near the installed positions. Most of the existing EWHs have only two thermostats and often do not have water flow sensor installed. Estimation of state of heat energy (SOHE) inside the hot water tank, which is crucial for efficient control and operation of the EWH, under such imperfect system conditions is very challenging. This paper, therefore, designs a transactive EWH agent (TEWHA) to better estimate SOHE in presence of measurement errors and imperfect system knowledge. The TEWHA, built-in Python, approximates the EWH physics using limited measurements obtained from the ground truth GridLABD model. The performance of the TEWHA is validated against ground truth system for three scenarios: a) ideal condition where TEWHA has complete knowledge of the system, b) imperfect condition where TEWHA has incomplete system information, and c) noised condition where TEWHA measurements contain random errors. Finally, an optimization problem is formulated and solved to demonstrate how TEWHA could use the estimated and measured parameters for a transactive control of EWH. Index Terms—Demand flexibility

demand flexibility, distribution system, electric ↗

Design of a Linear-Quadratic-Gaussian Controller for a Single-Cavity Rigid-Bunch RF-System

Linear quadratic Gaussian (LQG) controllers have the potential to reduce rf-system noise in synchrotron storage rings below what is ordinarily achieved with conventional proportional-integral (PI) controllers. But realizing this possibility requires careful design of the controller to match the characteristics of the machine (which is simplified by top-off operation) and is computationally demanding. This study develops computational methods for the construction of LQG controllers for discrete-time models of single-cavity rf systems coupled to rigid-bunch beams, and driven by rf amplifier noise. Matlab’s control-systems toolbox (CST) is the primary computational tool, particularly for the steady-state Kalman estimator, the LQR feedback, and the LQG controller. Of the rf signals available to the controller, a subset is chosen that results in a stable, effective, and economical controller. This floating-point LQG controller is then analyzed to establish resolutions of state variables, ADCs, DACs, and matrix coefficients that, in a fixed-point controller, provided essentially undiminished performance. A Simulink model computes beam noise in linear and nonlinear rf-system models with floating-point, fixed-point, and proportional-integral controllers. This machinery is applied to NSLS-II, CLS, and NSLS VUV rings showing bandwidth and amplifier noise suppression beyond what a PI controller can do. Required signal resolutions are surprisingly moderate. Testing and tuning with response functions computed by Vlasov simulations are performed. Thoughts are given on the further validation and tuning of the linearized model by machine measurements, DSP implementations, and future work.

36 MATERIALS SCIENCE↗

Quantum learning without quantum memory

A quantum learning machine for binary classification of qubit states that does not require quantum memory is introduced and shown to perform with the minimum error rate allowed by quantum mechanics for any size of the training set. This result is shown to be robust under (an arbitrary amount of) noise and under (statistical) variations in the composition of the training set, provided it is large enough. This machine can be used an arbitrary number of times without retraining. Its required classical memory grows only logarithmically with the number of training qubits, while its excess risk decreases as the inverse of this number, and twice as fast as the excess risk of an ‘‘estimate-and-discriminate’’ machine, which estimates the states of the training qubits and classifies the data qubit with a discrimination protocol tailored to the obtained estimates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Probing light pseudoscalar, axial vector states through {eta}{sub b}{yields}{tau}{sup +}{tau}{sup -}

In this paper, we explore the decay {eta}{sub b}{yields}{tau}{sup +}{tau}{sup -} as a probe for a light pseudoscalar or a light axial vector state. We estimate the standard model branching ratio for this decay to be {approx}4x10{sup -9}. We show that considerably larger branching ratios, up to the present experimental limit of {approx}8%, are possible in models with a light pseudoscalar or a light axial vector state. As we do not include possible mixing effects between the light pseudoscalar and the {eta}{sub b}, our results should be reliable when the pseudoscalar mass is away from the {eta}{sub b} mass.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

wtDigiTwin (Wind Turbine Digital Twin) [SWR-21-15]

This wind turbine digital twin software (wtDigiTwin) provides a digital twin solution for wind turbine applications. The focus of wtDigiTwin is to estimate loads, motions and environmental conditions for an operating wind turbine. The program uses supervisory control and data acquisition (SCADA) measurements as inputs, together with a wind turbine model. The wind industry is currently challenged by the high cost of operation and maintenance. These costs could be mitigated if component failures are predicted, but such predictions are difficult unless the turbines are equipped with expensive measuring devices. The alternative is to use a digital twin such as wtDigiTwin to estimate the necessary signals. wtDigiTwin can perform online prediction of signals that are otherwise not measured, using a limited set of reliable measurements and a physics-based model. The predicted signals can be used in applications that have direct cost benefits: 1) real-time estimation of the fatigue consumption of key components of the wind turbine; 2) root cause analyses and failure detections ; 3) lifetime reassessments ; 4) improvements to follow-on designs. The current version provides examples to estimate wind speed, thrust, torque, tower-top position, and tower loads on an onshore wind turbine using the following measurements tower top acceleration, generator torque, pitch, and rotational speed. The model combines a linear state-space model, a wind speed estimator, and a Kalman filter algorithm that integrates measurements with the state model to perform state estimations. The state space model is obtained either using OpenFAST linearizations, or using the yams package provided with the software.

Branlard, Emmanuel↗

Ensemble Kalman filters for dynamical systems with unresolved turbulence

Ensemble Kalman filters are developed for turbulent dynamical systems where the forecast model does not resolve all the active scales of motion. Coarse-resolution models are intended to predict the large-scale part of the true dynamics, but observations invariably include contributions from both the resolved large scales and the unresolved small scales. The error due to the contribution of unresolved scales to the observations, called ‘representation’ or ‘representativeness’ error, is often included as part of the observation error, in addition to the raw measurement error, when estimating the large-scale part of the system. It is here shown how stochastic superparameterization (a multiscale method for subgridscale parameterization) can be used to provide estimates of the statistics of the unresolved scales. In addition, a new framework is developed wherein small-scale statistics can be used to estimate both the resolved and unresolved components of the solution. The one-dimensional test problem from dispersive wave turbulence used here is computationally tractable yet is particularly difficult for filtering because of the non-Gaussian extreme event statistics and substantial small scale turbulence: a shallow energy spectrum proportional to k{sup −5/6} (where k is the wavenumber) results in two-thirds of the climatological variance being carried by the unresolved small scales. Because the unresolved scales contain so much energy, filters that ignore the representation error fail utterly to provide meaningful estimates of the system state. Inclusion of a time-independent climatological estimate of the representation error in a standard framework leads to inaccurate estimates of the large-scale part of the signal; accurate estimates of the large scales are only achieved by using stochastic superparameterization to provide evolving, large-scale dependent predictions of the small-scale statistics. Again, because the unresolved scales contain so much energy, even an accurate estimate of the large-scale part of the system does not provide an accurate estimate of the true state. By providing simultaneous estimates of both the large- and small-scale parts of the solution, the new framework is able to provide accurate estimates of the true system state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Prediction of Safety Level of Low-Head and Ownerless Hydraulic Structures

Methods of systems reliability theory are applied to the results of an expert inspection of more than 1000 low-head hydraulic power systems in the Moscow region. The rates of failure of homogeneous earth dams are estimated. A state graph of a hydraulic structure, represented as a system that passes through discrete states from a normal to a dangerous level without maintenance or repair, is proposed. The constant failure rates for these states are calculated. The probabilistic characteristics of the safety level of low-head earth dams are predicted.

42 ENGINEERING↗

STRONGER REFLECTION FROM BLACK HOLE ACCRETION DISKS IN SOFT X-RAY STATES

We analyze 15,000 spectra of 29 stellar-mass black hole (BH) candidates collected over the 16 year mission lifetime of Rossi X-ray Timing Explorer using a simple phenomenological model. As these BHs vary widely in luminosity and progress through a sequence of spectral states, which we broadly refer to as hard and soft, we focus on two spectral components: the Compton power law and the reflection spectrum it generates by illuminating the accretion disk. Our proxy for the strength of reflection is the equivalent width of the Fe–K line as measured with respect to the power law. A key distinction of our work is that for all states we estimate the continuum under the line by excluding the thermal disk component and using only the component that is responsible for fluorescing the Fe–K line, namely, the Compton power law. We find that reflection is several times more pronounced (∼3) in soft compared to hard spectral states. This is most readily caused by the dilution of the Fe line amplitude from Compton scattering in the corona, which has a higher optical depth in hard states. Alternatively, this could be explained by a more compact corona in soft (compared to hard) states, which would result in a higher reflection fraction.

79 ASTRONOMY AND ASTROPHYSICS↗

Reducing the cost of energy estimation in the variational quantum eigensolver algorithm with robust amplitude estimation

Quantum chemistry and materials is one of the most promising applications of quantum computing. Yet much work is still to be done in matching industry-relevant problems in these areas with quantum algorithms that can solve them. Most previous efforts have carried out resource estimations for quantum algorithms run on large-scale fault-tolerant architectures, which include the quantum phase estimation algorithm. In contrast, few have assessed the performance of near-term quantum algorithms, which include the variational quantum eigensolver (VQE) algorithm. Recently, a large-scale benchmark study [Gonthier et al. 2020] found evidence that the performance of the variational quantum eigensolver for a set of industry-relevant molecules may be too inefficient to be of practical use. This motivates the need for developing and assessing methods that improve the efficiency of VQE. In this work, we predict the runtime of the energy estimation subroutine of VQE when using robust amplitude estimation (RAE) to estimate Pauli expectation values. Under conservative assumptions, our resource estimation predicts that RAE can reduce the runtime over the standard estimation method in VQE by one to two orders of magnitude. Despite this improvement, we find that the runtimes are still too large to be practical. These findings motivate two complementary efforts towards quantum advantage: 1) the investigation of more efficient near-term methods for ground state energy estimation and 2) the development of problem instances that are of industrial value and classically challenging, but better suited to quantum computation.

Johnson, Peter D.↗

Secondary battery management

A method of managing a battery system, the battery system including at least one battery cell, at least one sensor configured to measure at least one characteristic of the battery cell, and a battery management system including a microprocessor and a memory, the method comprising receiving by the battery management system, from the at least one sensor at least one measured characteristic of the battery cell at a first time and at least one measured characteristic of the battery cell at a second time. The battery management system estimating, at least one state of the battery cell by applying a physics-based battery model, the physics based battery model being based on differential algebraic equations; and regulating by the battery management system, at least one of charging or discharging of the battery cell based on the at least one estimated state.

25 ENERGY STORAGE↗