SEARCH · Engineering Papers

Results for “Specific impulse”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Two-dimensional kinetics computer program for orbit transfer vehicles

Future Orbit Transfer Vehicles (OTV) presently under consideration require rocket engines delivering a high specific impulse. This high performance can be obtained with large area ratio thrust chambers using oxygen with either hydrogen or hydrocarbon fuels. In the projected nozzles, the combustion products are expanded to low pressure and temperature levels at high Mach number, a domain which has not been experienced with existing rocket engines. In order to assist in the design and evaluation of OTV engines, modifications have recently been incorporated in the Two-Dimensional-Kinetics (TDK) computer program. These modifications include the treatment of shock waves induced by the wall curvature, and shocks which are attached to the wall. The reflection of a shock wave at the flow axis is also treated in an appropriate manner and multiple shock reflections are allowed. A Boundary Layer Module (BLM) has also been incorporated into the TDK computer program in order to provide an automated treatment of the rigorous JANNAF rocket engine performance prediction procedure.

Nickerson, G. R.↗

NASA NTRS1985

Investigation of arcjet nozzle performance

An investigation is performed to examine the feasibility of improving arcjet performance through the use of contoured nozzle designs. The results of preliminary experiments performed on two different nozzle configurations, a 19 degree half-angle cone and a 'bell' shaped nozzle, are described. A unique experimental arcjet apparatus, which effectively tests only the change in nozzle contour on arcjet performance is used in this investigation. The preliminary experimental results indicate approximately an 8 percent improvement in thrust and specific impulse for operation at 15 kW with an ammonia flow rate of 0.20 g/s for a 'bell' shaped nozzle compared to a conical nozzle.

Brophy, J. R.↗

NASA NTRS1985

Resistojet operation with various propellants

A flight-qualified electrothermal thruster demonstrated its adaptability to a variety of propellants. Originally qualified for operation with hydrazine propellant, it was operated with nitrogen, hydrogen, and ammonia propellants, demonstrating 73, 61, and 52 percent overall efficiency with these propellants, respectively, when tested over a wide range of operating conditions. By introducing a preheater to admit hot, rather than cold, propellant inlet gases to the thruster's augmentation heat exchanger, delivered specific impulse closer to theoretical performance limits should be achieved.

Zafran, S.↗

NASA NTRS1986

A xenon ion propulsion module for enhanced spacecraft capability

Design, development and preliminary testing of a two-engine xenon ion propulsion module for early flight evaluation is described. Extensive use is made of flight spare propellant system components and also engineering model 30-cm ion engines and assemblies originally developed for the Solar Electric Propulsion System program. Significant design features include a redundant propellant feed system that incorporates a novel gas pulse assembly for rapid and completely reliable engine startup, a central neutralizer subsystem with dual neutralizers for redundancy, and major ion engine performance improvements resulting in a nearly doubling of the 30-cm engine thrust in addition to operating on xenon rather than mercury propellant. At a module input power of 10.0 kw, maximum thrust and specific impulse are projected to be 0.4 N and 3,500 sec. respectively, for a total module efficiency of 67 percent. Total mass of the xenon ion module, including the propellant tank, is only 70.2 kg. The technical approaches taken towards developing and integrating the subsystems comprising this ion propulsion module are presented and discussed in detail.

Aston, G.↗

NASA NTRS1986

The design and operating characteristics of a 30-kW thermal arcjet engine for space propulsion

Attention is given to the design features of a radiation-cooled, 30-kW thermal arcjet thruster, whose laboratory tests have yielded specific impulses of up to 935 sec at 36-44 percent thrust efficiency, together with a cumulative lifetime of over 400 hours. All materials used, including seals, can sustain operation at temperatures sufficiently elevated to require the radiation of all waste heat. This electric propulsion system is ideally suited to missions such as the Space-Based Radar. A detailed consideration is conducted for the thruster's seals, which are the most critical element of the design.

Pivirotto, T.↗

NASA NTRS1986

SSME thrust chamber modeling with Navier Stokes equations

The capability of predicting two-dimensional, compressible and reacting flow in the combustion chamber and nozzle of the Space Shuttle Main Engine (SSME) is demonstrated. A nonorthogonal body fitted coordinate system has been used to represent the combustor and nozzle geometry. The Navier-Stokes equations are solved for the entire thrust chamber with the k-epsilon turbulence model accounting for compressibility and large pressure gradients effects. Results of the computational test cases reveal all expected features of the transonic nozzle flows including location of sonic line, internal shock and boundary layer build-up. Calculated performance parameters such as thrust, flow rate, and specific impulse are also in reasonble agreement with available data. The results show promising potential of solving full Navier-Stokes equations with heat transfer and two-phase combustion in truly comprehensive modeling of rocket engines.

Przekwas, A. J.↗

NASA NTRS1986

Advanced propulsion for polar-orbiting and coorbiting free flyers

Advanced propulsion systems for polar-orbiting and coorbiting free flyers were investigated. Resistojet, arcjet, ion, magnetoplasmadynamic and chemical-bipropellant nitrogen tetroxide/monomethyl hydrazine (NTO/MMH) propulsion systems were compared to the baseline free-flyer hydrazine (N2H4)-propulsion-system performance. Advanced resistojet, arcjet, ion, and NTO/MMH propulsion systems enable significant propellant-mass savings over the baseline N2H4-propulsion system. Using free-flyer mission requirements from the Langley Research Center Mission-Data Base, detailed propulsion requirements for over thirty free-flyer missions were analyzed. The Polar-Platform trip-time constraints may preclude using a low-thrust electric-propulsion system. Electric propulsion will, however, allow a significant coorbiter propellant-mass reduction. Frequent servicing and nodal-regression effects on the coorbiting free-flyer's orbit increase the required mission velocity change and propellant mass. For many coorbiter missions high-specific-impulse resistojet-, arcjet- and ion-propulsion systems allow substantial life-cycle propellant-mass savings.

Palaszewski, B. A.↗

NASA NTRS1986

PEGASUS - A multi-megawatt nuclear electric propulsion system

A propulsion system (The PEGASUS Drive) consisting of a magnetoplasmadynamic (MPD) thruster driven by a multimegawatt nuclear power system is proposed as the propulsion system for a manned Mars mission. The propulsion system described is based on a mission profile containing a 510-day burn time (for a mission time of approximately 1000 days). Electric propulsion systems have significant advantages over chemical systems, because of high specific impulse, lower propellant requirements, and lower system mass. The thermal power for the PEGASUS Drive is supplied by a boiling liquid-metal fast reactor. The system consists of the reactor, reactor shielding, power conditioning, heat rejection, and MPD thruster subsystems. It is capable of providing a maximum of 8.5 megawatts of electrical power of which 6 megawatts is needed for the thruster system, 1.5 megawatts is available for spacecraft system operations and inflight mission applications, leaving the balance for power system operation.

Coomes, E. P.↗

NASA NTRS1986

NASA electrothermal auxiliary propulsion technology

Electrothermal auxiliary propulsion systems provide high performance options which can have major mission benefits. There are several electrothermal concepts which offer a range of characteristics and benefits. Resistojets are the highest thrust to power option and are currently operational at mission average values of specific impulse, I sub sp approximately 295 sec. Long life, multipropellant resistojets are being developed for the Space Station, and resistojet technology advancements are being pursued to improve the I sub sp by more than 20 percent for resistojets used in satellite applications. Direct current arcjets have the potential of I sub sp over 400 sec with storable propellants and should provide over 1000 sec with hydrogen. Advanced concepts are being investigated to provide high power density options and possible growth to primary propulsion applications. Broad based experimental and analytical research and technology programs of NASA are summarized and recent significant advances are reviewed.

Stone, J. R.↗

NASA NTRS1986

Further shock tunnel studies of scramjet phenomena

Scramjet phenomena were studied using the shock tunnel T3 at the Australian National University. Simple two dimensional models were used with a combination of wall and central injectors. Silane as an additive to hydrogen fuel was studied over a range of temperatures and pressures to evaluate its effect as an ignition aid. The film cooling effect of surface injected hydrogen was measured over a wide range of equivalence. Heat transfer measurements without injection were repeated to confirm previous indications of heating rates lower than simple flat plate predictions for laminar boundary layers in equilibrium flow. The previous results were reproduced and the discrepancies are discussed in terms of the model geometry and departures of the flow from equilibrium. In the thrust producing mode, attempts were made to increase specific impulse with wall injection. Some preliminary tests were also performed on shock induced ignition, to investigate the possibility in flight of injecting fuel upstream of the combustion chamber, where it could mix but not burn.

Morgan, R. G.↗

NASA NTRS1986

A design study of hydrazine and biowaste resistojets

A generalized modeling program was adapted in BASIC on a personal computer to compare the performance of four types of biowaste resistojets and two types of hydrazine augmenters. Analyzed biowaste design types were: (1) an electrically conductive ceramic heater-exchanger of zirconia; (2) a truss heater of platinum in cross flow; (3) an immersed bicoiled tubular heater-exchanger; and (4) a nonexposed, refractory metal, radiant heater in a central cavity within a heat exchanger case. Concepts 2 and 3 are designed to have an efficient, stainless steel outer pressure case. The hydrazine design types are: (5) an immersed bicoil heater exchanger and (6) a nonexposed radiant heater now with a refractory metal case. The ceramic biowaste resistojet has the highest specific impulse growth potential at 2000 K of 192.5 (CO2) and 269 s (H2O). The bicoil produces the highest augmenter temperature of 1994 K for a 2073 K heater giving 317 s at .73 overall efficiency. Detailed temperature profiles of each of the designs are shown. The scaled layout drawings of each are presented with recommended materials and fabrication methods.

Page, R. J.↗

NASA NTRS1986

PEGASUS: A multi-megawatt nuclear electric propulsion system

A propulsion system (PEGASUS) consisting of an electric thruster driven by a multimegawatt nuclear power system is proposed for a manned Mars mission. Magnetoplasmadynamic and mercury-ion thrusters are considered, based on a mission profile containing a 510-day burn time (for a mission time of approximately 1000 days). Both thrusters are capable of meeting the mission parameters. Electric propulsion systems have significant advantages over chemical systems, because of high specific impulse, lower propellant requirements, and lower system mass. The power for the PEGASUS system is supplied by a boiling liquid-metal fast reactor. The power system consists of the reactor, reactor shielding, power conditioning subsystems, and heat rejection subsystems. It is capable of providing a maximum of 8.5 megawatts of electrical power of which 6 megawatts is needed for the thruster system, leaving 1.5 megawatts available for inflight mission applications.

Coomes, Edmund P.↗

NASA NTRS1987

Space station resistojet system requirements and interface definition study

Preliminary resistojet design requirements were established based on initial technical requirements imposed by the results of NASA and Rocketdyne studies. The requirements are directed toward long life, simplicity, flexibility, and commonality with other space station components. The resistojet assembly is comprised of eight resistojets, fluid components downstream of the waste fluid storage system, a power controller, structure, and shielding. It consists of two identical subassemblies, one of which is redundant. Each subassembly consists of four 500-W resistojets, series redundant latch values, a power controller, a water vaporizer, two pressure regulators, filters, check valves, disconnects, fluid tubing, and electrical cables. All components are packaged at the end of the stinger aft of the JEM and Columbus modules. Different flow and power control methods were studied. A constant inlet pressure and a two-power setting controller were tentatively selected based on simplicity and reasonably high specific impulse for the range of waste gas compositions that are anticipated. The constant pressure is supplied by pressure regulators. The two set point power control includes individual power supplies to each resistojet heater and water vaporizer. An embedded data processor, a multiplexer-demultiplexer, and a network interface unit that are standard space station components are included in the power controller. The total dry weight of the resistojet assembly is approximately 172 lb. The total cost for design, development, test, evaluation, qualification, and flight hardware is estimated to be $16 million.

Heckert, Bruce J.↗

NASA NTRS1987

Conceptual design and integration of a space station resistojet propulsion assembly

The resistojet propulsion module is designed as a simple, long life, low risk system offering operational flexibility to the space station program. It can dispose of a wide variety of typical space station waste fluids by using them as propellants for orbital maintenance. A high temperature mode offers relatively high specific impulse with long life while a low temperature mode can propulsively dispose of mixtures that contain oxygen or hydrocarbons without reducing thruster life or generating particulates in the plume. A low duty cycle and a plume that is confined to a small aft region minimizes the impacts on the users. Simple interfaces with other space station systems facilitate integration. It is concluded that there are no major obstacles and many advantages to developing, installing, and operating a resistojet propulsion module aboard the Initial Operational Capability (IOC) space station.

Tacina, Robert R.↗

NASA NTRS1987

Comparison of two procedures for predicting rocket engine nozzle performance

Two nozzle performance prediction procedures which are based on the standardized JANNAF methodology are presented and compared for four rocket engine nozzles. The first procedure required operator intercedence to transfer data between the individual performance programs. The second procedure is more automated in that all necessary programs are collected into a single computer code, thereby eliminating the need for data reformatting. Results from both procedures show similar trends but quantitative differences. Agreement was best in the predictions of specific impulse and local skin friction coefficient. Other compared quantities include characteristic velocity, thrust coefficient, thrust decrement, boundary layer displacement thickness, momentum thickness, and heat loss rate to the wall. Effects of wall temperature profile used as an input to the programs was investigated by running three wall temperature profiles. It was found that this change greatly affected the boundary layer displacement thickness and heat loss to the wall. The other quantities, however, were not drastically affected by the wall temperature profile change.

Davidian, Kenneth J.↗

NASA NTRS1987

Pretest uncertainty analysis for chemical rocket engine tests

A parametric pretest uncertainty analysis has been performed for a chemical rocket engine test at a unique 1000:1 area ratio altitude test facility. Results from the parametric study provide the error limits required in order to maintain a maximum uncertainty of 1 percent on specific impulse. Equations used in the uncertainty analysis are presented.

Davidian, Kenneth J.↗

NASA NTRS1987

Low power DC arcjet operation with hydrogen/nitrogen/ammonia mixtures

The effect of gas composition and ambient pressure on arcjet operation was determined. Arcjet operation in different facilities was also compared to determine the validity of tests in small facilities. Volt-ampere characteristics were determined for an arcjet using hydrogen/nitrogen mixtures (simulating both ammonia and hydrazine), hydrogen/nitrogen/ammonia mixtures, and pure ammonia as propellants at various flow rates. The arcjet had a typical performance of 450 sec specific impulse at 1 kW with hydrogen/nitrogen mixures. It was determined that the amount of ammonia present in the gas stream had a significant effect on the arcjet volt-ampere characteristics. Also, hydrogen/nitrogen mixtures simulating ammonia gave arc characteristics approximately the same as those of pure ammonia. Finally, no differences in arc volt-ampere characteristics were seen between low and high ambient pressure operation in the same facility. A 3 to 5 V difference was seen when different facilities were compared, but this difference was probably due to differences in the voltage drops across the current connections, and not due to arcjet operational differences in the two facilities.

Hardy, Terry L.↗

NASA NTRS1987

An evaluation of metallized propellants based on vehicle performance

An analytical study was conducted to determine the improvements in vehicle performance possible by burning metals with conventional liquid bipropellants. These metallized propellants theoretically offer higher specific impulse, increased propellant density and improved vehicle performance compared with conventional liquid bipropellants. Metals considered were beryllium, lithium, aluminum and iron. Liquid bipropellants were H2/O2, N2H4/N2O4, RP-1/O2 and H2/F2. A mission with a delta V = 4267.2 m/sec (14,000 ft/sec) and vehicle with propellant volume fixed at 56.63 cu m (2000 cu ft) and dry mass fixed at 2761.6 kg (6000 lb) was used, roughly representing the transfer of a chemically propelled upper-stage vehicle from a low-Earth orbit to a geosynchronous orbit. The results of thermochemical calculations and mission analysis calculations for bipropellants metallized with beryllium, lithium, aluminum and iron are presented. Technology issues pertinent to metallized propellants are discussed.

Zurawski, Robert L.↗