Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

A Continental-Scale Estimate of Soil Organic Carbon Change at NEON Sites and Their Environmental and Edaphic Controls

Current carbon cycle models focus on the effects of climate and land-use change on primary productivity and microbial-mineral dependent carbon turnover in the topsoil, while less attention has been paid to vertical soil processes and soil-dependent response to land-use change along the profile. In this study, a spatial-temporal analysis was used to estimate soil organic carbon (SOC) change in topsoil/A horizon and subsoil/B horizon at National Ecological Observatory Network (NEON) sites, USA over 30 years. To separate the effects of land-use, environmental, and edaphic factors on SOC change, space-for-time substitution was used in combination with the Continuous Change Detection and Classification algorithm and Structural Equation Modeling. Results showed that (a) under natural vegetation, Spodosols and Inceptisols found in the eastern NEON sites had substantial topsoil SOC accumulation (+0.4 to +1.2 Mg C ha –1 year –1 ), while Inceptisols and Andisols in the west had a comparable magnitude of topsoil SOC loss (–0.5 to –1.8 Mg C ha –1 year –1 ); (b) Mollisols and Alfisols in the Central Plains sites were susceptible to significant SOC loss under farming and grazing; (c) Runoff/erosion and leaching potential, vertical translocation, and mineral sorption were the most important factors controlling SOC variation across the NEON sites. Our work could be used to parameterize ecosystem models simulating SOC change.

54 ENVIRONMENTAL SCIENCES↗

Numerical Study of Coupled Water and Vapor Flow, Heat Transfer, and Solute Transport in Variably-Saturated Deformable Soil During Freeze-Thaw Cycles

As climate change intensifies, soil water flow, heat transfer, and solute transport in the active, unfrozen zones within permafrost and seasonally frozen ground exhibit progressively more complex interactions that are difficult to elucidate with measurements alone. For example, frozen conditions impede water flow and solute transport in soil, while heat and mass transfer are significantly affected by high thermal inertia generated from water-ice phase change during the freeze-thaw cycle. To assist in understanding these subsurface processes, the current study presents a coupled two-dimensional model, which examines heat conduction-convection with water-ice phase change, soil water (liquid water and vapor) and groundwater flow, advective-dispersive solute transport with sorption, and soil deformation (frost heave and thaw settlement) in variably saturated soils subjected to freeze-thaw actions. This coupled multiphysics problem is numerically solved using the finite element method. The model's performance is first verified by comparison to a well-documented freezing test on unsaturated soil in a laboratory environment obtained from the literature. Then based on the proposed model, we quantify the impacts of freeze-thaw cycles on the distribution of temperature, water content, displacement history, and solute concentration in three distinct soil types, including sand, silt and clay textures. The influence of fluctuations in the air temperature, groundwater level, hydraulic conductivity, and solute transport parameters was also comparatively studied. The results show that (a) there is a significant bidirectional exchange between groundwater in the saturated zone and soil water in the vadose zone during freeze-thaw periods, and its magnitude increases with the combined influence of higher hydraulic conductivity and higher capillarity; (b) the rapid dewatering ahead of the freezing front causes local volume shrinkage within the non-frozen region when the freezing front propagates downward during the freezing stage and this volume shrinkage reduces the impact of frost heave due to ice formation. This gradually recovers when the thawed water replenishes the water loss zone during the thawing stage; and (c) the profiles of soil moisture, temperature, displacement, and solute concentration during freeze-thaw cycles are sensitive to the changes in amplitude and freeze-thaw period of the sinusoidal varying air temperature near the ground surface, hydraulic conductivity of soil texture, and the initial groundwater levels. Our modeling framework and simulation results highlight the need to account for coupled thermal-hydraulic-mechanical-chemical behaviors to better understand soil water and groundwater dynamics during freeze-thaw cycles and further help explain the observed changes in water cycles and landscape evolution in cold regions.

54 ENVIRONMENTAL SCIENCES↗

Hydrology Outweighs Temperature in Driving Production and Export of Dissolved Carbon in a Snowy Mountain Catchment

Abstract Terrestrial production and export of dissolved organic and inorganic carbon (DOC and DIC) to streams depends on water flow and biogeochemical processes in and beneath soils. Yet, understanding of these processes in a rapidly changing climate is limited. Using the watershed‐scale reactive‐transport model BioRT‐HBV and stream data from a snow‐dominated catchment in the Rockies, we show deeper groundwater flow averaged about 20% of annual discharge, rising to ∼35% in drier years. DOC and DIC production and export peaked during snowmelt and wet years, driven more by hydrology than temperature. DOC was primarily produced in shallow soils (1.94 ± 1.45 gC/m 2 /year), stored via sorption, and flushed out during snowmelt. Some DOC was recharged to and further consumed in the deeper subsurface via respiration (−0.27 ± 0.02 gC/m 2 /year), therefore reducing concentrations in deeper groundwater and stream DOC concentrations at low discharge. Consequently, DOC was primarily exported from the shallow zone (1.62 ± 0.96 gC/m 2 /year, compared to 0.12 ± 0.02 gC/m 2 /year from the deeper zone). DIC was produced in both zones but at higher rates in shallow soils (1.34 ± 1.00 gC/m 2 /year) than in the deep subsurface (0.36 ± 0.02 gC/m 2 /year). Deep respiration elevated DIC concentrations in the deep zone and stream DIC concentrations at low discharge. In other words, deep respiration is responsible for the commonly‐observed increasing DOC concentrations (flushing) and decreasing DIC concentrations (dilution) with increasing discharge. DIC export from the shallow zone was ~66% of annual export but can drop to ∼53% in drier years. Numerical experiments suggest lower carbon production and export in a warmer, drier future, and a higher proportion from deeper flow and respiration processes. These results underscore the often‐overlooked but growing importance of deeper processes in a warming climate.

54 ENVIRONMENTAL SCIENCES↗

99 TcO 4 - removal from legacy defense nuclear waste by an alkaline-stable 2D cationic metal organic framework

Removal of 99 TcO 4 - from legacy defense nuclear tank waste at Savannah River Site is highly desirable for the purpose of nuclear safety and environmental protection, but currently not achievable given the extreme conditions including high alkalinity, high ionic strength, and strong radiation field. Herein, we present a potential solution to this long-term issue by developing a two-dimensional cationic metal organic framework SCU-103, showing ultrahigh stability in alkaline aqueous media and great resistance to both β and γ radiation. More importantly, it is very effective for 99 TcO 4 - separation from aqueous media as demonstrated by fast exchange kinetics, high sorption capacity, and superior selectivity, leading to the successful removal of 99 TcO 4 - from actual Savannah River Site high level tank waste for the first time, to the best of our knowledge. In addition, the uptake mechanism is comprehensively elucidated by molecular dynamics simulation and density functional theory calculation, showing a unique chemical recognition of anions with low charge density.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Confinement effects and acid strength in zeolites

Chemical reactivity and sorption in zeolites are coupled to confinement and—to a lesser extent—to the acid strength of Brønsted acid sites (BAS). In presence of water the zeolite Brønsted acid sites eventually convert into hydronium ions. The gradual transition from zeolite Brønsted acid sites to hydronium ions in zeolites of varying pore size is examined by ab initio molecular dynamics combined with enhanced sampling based on Well-Tempered Metadynamics and a recently developed set of collective variables. While at low water content (1–2 water/BAS) the acidic protons prefer to be shared between zeolites and water, higher water contents (n > 2) invariably lead to solvation of the protons within a localized water cluster adjacent to the BAS. At low water loadings the standard free energy of the formed complexes is dominated by enthalpy and is associated with the acid strength of the BAS and the space around the site. Conversely, the entropy increases linearly with the concentration of waters in the pores, favors proton solvation and is independent of the pore size/shape.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Data-driven predictions of complex organic mixture permeation in polymer membranes

Membrane-based organic solvent separations are rapidly emerging as a promising class of technologies for enhancing the energy efficiency of existing separation and purification systems. Polymeric membranes have shown promise in the fractionation or splitting of complex mixtures of organic molecules such as crude oil. Determining the separation performance of a polymer membrane when challenged with a complex mixture has thus far occurred in an ad hoc manner, and methods to predict the performance based on mixture composition and polymer chemistry are unavailable. Here, we combine physics-informed machine learning algorithms (ML) and mass transport simulations to create an integrated predictive model for the separation of complex mixtures containing up to 400 components via any arbitrary linear polymer membrane. We experimentally demonstrate the effectiveness of the model by predicting the separation of two crude oils within 6-7% of the measurements. Integration of ML predictors of diffusion and sorption properties of molecules with transport simulators enables for the rapid screening of polymer membranes prior to physical experimentation for the separation of complex liquid mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Acid-base bifunctional porous liquids

Basic solutions are essential for gas-involved catalytic transformations, yet their ultralow free volume limits gas solubility and diffusivity. Engineering permanent porosity in such reactive liquids has remained a longstanding challenge. Here, we introduce a surface-sacrifice strategy that incorporates Brønsted-acidic zeolite nanocrystals into strong organic bases to create permanently porous reactive liquids. Stereochemically controlled acid–base neutralization at the external zeolite surface forms a thin ionic solvation shell that stabilizes the dispersion while fully preserving the internal microporosity and crystallinity of the zeolite framework. The resulting basic media exhibit persistent microporosity, confirmed by inert-gas sorption, 129Xe nuclear magnetic resonance, neutron scattering, and theoretical simulations. These porous liquids show significantly enhanced catalytic performance in CO2 conversion and hydrogenation reactions. The coexisting acidic and basic sites further enable antagonistic cascade catalysis within a single liquid phase. This surface-sacrifice approach provides a general route to introduce permanent porosity into reactive media, enabling boosted gas transformations.

Qiu, Liqi [University of Tennessee, Knoxville (UTK↗

Adsorption space for microporous polymers with diverse adsorbate species

Abstract The enormous number of combinations of adsorbing molecules and porous materials that exist is known as adsorption space. The adsorption space for microporous polymers has not yet been systematically explored, especially when compared with efforts for crystalline adsorbents. We report molecular simulation data for the adsorptive and structural properties of polymers of intrinsic microporosity with a diverse set of adsorbate species with 345 distinct adsorption isotherms and over 240,000 fresh and swollen structures. These structures and isotherms were obtained using a sorption-relaxation technique that accounts for the critical role of flexibility of the polymeric adsorbents. This enables us to introduce a set of correlations that can estimate adsorbent swelling and fractional free volume dilation as a function of adsorbate uptake based on readily characterized properties. The separation selectivity of the 276 distinct binary molecular pairs in our data is reported and high-performing adsorbent systems are identified.

36 MATERIALS SCIENCE↗

Removal of radionuclides from acidic solution by activated carbon impregnated with methyl- and carboxy-benzotriazoles

The removal efficiencies of metals commonly used to model the fate and transport of aqueous uranium and radioactive its daughter products, were observed on activated carbons impregnated with different benzotriazole derivatives. Acidic solutions containing U(VI), Sr(II), Eu(III), and Ce(III) were used to determine the immobilization potential of carboxybenzotriazole (CBT) and methylbenzotriazole (MeBT), where these derivatives were sorbed to different types of granular activated carbon (GAC). This sorption behavior can be predicted by Redlich–Peterson model. Flow-through column tests showed that the immobilization of uranium and some of its daughter products, significantly improves in response to oxidized GACs saturated with carboxybenzotrzole (CBT), which reached a maximum elimination for U(VI) at 260 BV, Eu(III) at 114 BV, Ce(III) at 126 BV, and Sr(II) at 100. MeBT significantly desorbed from GAC under acidic conditions. Trace amounts of CBT were observed in some column effluents, but this did not appear to alter the effectiveness of metal removal, regardless of the model radionuclide studied. These results suggest that enhanced immobilization of selected metals on GAC, can be achieved by impregnating oxidized activated carbon with carboxylated benzotriazoles, and that metal removal efficiency on this media, is related to their valence and ionic radius in acidic environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon dioxide-enhanced metal release from kerogen

Heavy metals released from kerogen to produced water during oil/gas extraction have caused major environmental concerns. To curtail water usage and production in an operation and to use the same process for carbon sequestration, supercritical CO 2 (scCO 2 ) has been suggested as a fracking fluid or an oil/gas recovery agent. It has been shown previously that injection of scCO 2 into a reservoir may cause several chemical and physical changes to the reservoir properties including pore surface wettability, gas sorption capacity, and transport properties. Using molecular dynamics simulations, we here demonstrate that injection of scCO 2 might lead to desorption of physically adsorbed metals from kerogen structures. This process on one hand may impact the quality of produced water. On the other hand, it may enhance metal recovery if this process is used for in-situ extraction of critical metals from shale or other organic carbon-rich formations such as coal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Systematic observations of enhanced oil recovery and associated changes at carbonate-brine and carbonate-petroleum interfaces

Enhanced oil recovery (EOR) from carbonates is obtained by injection of controlled ionic strength brines containing “active ions” (e.g., SO 4 2- , Mg 2+ , Ca 2+ ). It is generally believed that this occurs through the interaction of the active ions at the carbonate-brine interface (e.g., within a thin brine layer separating the petroleum and the carbonate phases). Here, in-situ observations show how one active ion, SO 4 2- , alters behavior at the carbonate-petroleum interface. Displacement of petroleum from initially oil-wet carbonate rocks using brines with variable SO 4 concentrations systematically changes oil recovery, in situ contact angles, and connectivity of the oil phase, confirming that the active ion alters interactions at the oil/brine/carbonate interface, as expected. Measurements of model calcite-fluid interfaces show that there is no measurable sorption of SO 4 to carbonate-brine interfaces but reveals that the carbonate-petroleum interface is altered by previous exposure to SO 4 -containing brines. These results suggest that EOR in carbonates is controlled indirectly by active ions. We propose that this may be due to a reduced oleophilicity of the carbonate caused by chemical complexation between the active ion and petroleum’s acidic and basic functional groups. This mechanism explains how both anions and cations act as active ions for EOR in carbonates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient crystal structure materials as reactive sorbent for the CO 2 and CH 4 adsorption and storage

The efficient dirubidium cobalt bis(dihydrogendiphosphate) dihydrate compound is successfully synthesized in a solution and used as a reactive sorbent for the CO 2 and CH 4 gases adsorption and storage. A crystal of this Rb 2 Co(H 2 P 2 O 7 ) 2 ·2H 2 O compound has been isolated and characterized by single X-ray diffraction analysis and was found to crystallize in the triclinic system (P$\overline{1}$) with the cell parameters (Å): 6.980(1), 7.370(1), 7.816(1), 81.74(1), 70.35(1), 86.34(1); V = 374.68(9) Å3, Z = 2. The crystal-packing consists of a three-dimensional framework made upon corners and edges sharing of [RbO 7 ], [H 2 P 2 O 7 ] and [CoO 6 ] entities, furthermore linked by a network of H-bonds. The UV–Vis spectroscopy revealed usual transitions between the ground state 4T1g and the upper levels 4T2g, 4A2g and 4T1g (P). Moreover, the CO 2 and CH 4 gases sorption measurements were successfully performed at two different temperatures (25 and 45 °C) and various pressures ranging from vacuum to 50 bar. Our results show that rate of CO 2 and CH 4 capturing was 3.10 mmol/g and 2.35 mmol/g at temperature 25 °C and pressure 50 bar, respectively. This compound showed a clear potential for CO 2 /CH 4 adsorption and storage thereby paving the way towards its exploration and adaptation for capturing and collecting carbon dioxide and greenhouse gases from the air, and their conversion into hydrocarbon fuels using existing mature technologies. We have also conducted density functional theory calculations to study the CO 2 and CH 4 adsorption properties of Rb 2 Co(H 2 P 2 O 7 ) 2 ·2H 2 O. The simulation results show enhanced adsorption of both types of molecules on the surface of the material.

36 MATERIALS SCIENCE↗

Atomic resolution tracking of nerve-agent simulant decomposition and host metal–organic framework response in real space

Gas capture and sequestration are valuable properties of metal–organic frameworks (MOFs) driving tremendous interest in their use as filtration materials for chemical warfare agents. Recently, the Zr-based MOF UiO-67 was shown to effectively adsorb and decompose the nerve-agent simulant, dimethyl methylphosphonate (DMMP). Understanding mechanisms of MOF-agent interaction is challenging due to the need to distinguish between the roles of the MOF framework and its particular sites for the activation and sequestration process. Here, we demonstrate the quantitative tracking of both framework and binding component structures using in situ X-ray total scattering measurements of UiO-67 under DMMP exposure, pair distribution function analysis, and theoretical calculations. The sorption and desorption of DMMP within the pores, association with linker-deficient Zr6 cores, and decomposition to irreversibly bound methyl methylphosphonate were directly observed and analyzed with atomic resolution.

36 MATERIALS SCIENCE↗

Sulfate reduction accelerates groundwater arsenic contamination even in aquifers with abundant iron oxides

Groundwater contamination by geogenic arsenic is a global problem affecting nearly 200 million people. In South and Southeast Asia, a cost-effective mitigation strategy is to use oxidized low-arsenic aquifers rather than reduced high-arsenic aquifers. Aquifers with abundant oxidized iron minerals are presumably safeguarded against immediate arsenic contamination, due to strong sorption of arsenic onto iron minerals. However, preferential pumping of low-arsenic aquifers can destabilize the boundaries between these aquifers, pulling high-arsenic water into low-arsenic aquifers. We investigate this scenario in a hybrid field-column experiment in Bangladesh where naturally high-arsenic groundwater is pumped through sediment cores from a low-arsenic aquifer, and detailed aqueous and solid-phase measurements are used to constrain reactive transport modelling. Here we show that elevated groundwater arsenic concentrations are induced by sulfate reduction and the predicted formation of highly mobile, poorly sorbing thioarsenic species. Furthermore, this process suggests that contamination of currently pristine aquifers with arsenic can occur up to over 1.5 times faster than previously thought, leading to a deterioration of urgently needed water resources.

54 ENVIRONMENTAL SCIENCES↗

New chemistry for enhanced carbon capture: beyond ammonium carbamates

Carbon capture and sequestration is necessary to tackle one of the biggest problems facing society: global climate change resulting from anthropogenic carbon dioxide (CO 2 ) emissions. Despite this pressing need, we still rely on century-old technology—aqueous amine scrubbers—to selectively remove CO 2 from emission streams. Amine scrubbers are effective due to their exquisite chemoselectivity towards CO 2 to form ammonium carbamates and (bi)carbonates, but suffer from several unavoidable limitations. In this perspective, we highlight the need for CO 2 capture via new chemistry that goes beyond the traditional formation of ammonium carbamates. In particular, we demonstrate how ionic liquid and metal–organic framework sorbents can give rise to capture products that are not favourable for aqueous amines, including carbamic acids, carbamate–carbamic acid adducts, metal bicarbonates, alkyl carbonates, and carbonic acids. These new CO 2 binding modes may offer advantages including higher sorption capacities and lower regeneration energies, though additional research is needed to fully explore their utility for practical applications. Overall, we outline the unique challenges and opportunities involved in engineering new CO 2 capture chemistry into next-generation technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Incorporating concentration-dependent sediment microbial activity into methylmercury production kinetics modeling

We report in anoxic environments, anaerobic microorganisms carrying the hgcAB gene cluster can mediate the transformation of inorganic mercury (Hg(II)) to monomethylmercury (MMHg). The kinetics of Hg(II) transformation to MMHg in periphyton from East Fork Poplar Creek (EFPC) in Oak Ridge, TN have previously been modeled using a transient availability model (TAM). The TAM for Hg(II) methylation combines methylation/demethylation kinetics with kinetic expressions for processes that decrease Hg(II) and MMHg availability for methylation and demethylation (multisite sorption of Hg(II) and MMHg, Hg(II) reduction/Hg(0) oxidation). In this study, the TAM is used for the first time to describe MMHg production in sediment. We assessed MMHg production in sediment microcosms using two different sediment types from EFPC: a relatively anoxic, carbon-rich sediment with higher microbial activity (higher CO 2 production from sediment) and a relatively oxic, sandy, carbon-poor sediment with lower microbial activity (lower CO 2 production from sediment). Based on 16s rRNA sequencing, the overall microbial community structure in the two sediments was retained during the incubations. However, the hgcA containing methanogenic Euryarchaeota communities differed between sediment types and their growth followed different trajectories over the course of incubations, potentially contributing to the distinct patterns of MMHg production observed. The general TAM paradigm performed well in describing MMHg production in the sediments. However, the MMHg production and ancillary data suggested the need to revise the model structure to incorporate terms for concentration-dependent microbial activity over the course of the incubations. We modified the TAM to include Monod-type kinetics for methylation and demethylation and observed an improved fit for the carbon-rich, microbially active sediment. Overall our work shows that the TAM can be applied to describe Hg(II) methylation in sediments and that including expressions accounting for concentration-dependent microbial activity can improve the accuracy of the model description of the data in some cases.

54 ENVIRONMENTAL SCIENCES↗

Alkaline salt-promoted construction of hydrophilic and nitrogen deficient graphitic carbon nitride with highly improved photocatalytic efficiency

Graphitic carbon nitride (g-C 3 N 4 ) possesses fascinating merits, but its practical applications are limited by the inferior properties of limited visible-light sorption, rapid recombination of photo-excited charge carriers and low electrical conductivity. Introduction of N-defects is an efficient approach to tune its optical properties, but strategies capable of creating abundant vacancies and simultaneously maintaining the highly crystalline architecture are still limited and highly desired. In this work, a facile construction methodology was demonstrated to afford g-C 3 N 4 with abundant N vacancies, high crystallinity, a hydrophilic surface structure, a small particle size, and an increased surface area under neat and mild conditions. Furthermore, the essence of our approach lies in the treatment of the bulk g-C 3 N 4 precursor with an alkaline salt (LiN(SiMe 3 ) 2 ) with a low melting point, moderate nucleophilicity, and easy removal procedures. The unique structural properties of the afforded ND-g-C 3 N 4 allow for a significantly redshifted absorption edge and enhanced charge carrier separation, leading to superior photocatalytic hydrogen evolution performance three times that obtained by pristine g-C 3 N 4 . The modification strategy developed herein sheds light on the fabrication of g-C 3 N 4 -based materials with improved photocatalytic efficiency via efficient introduction of N defects, variation of the surface structure, and retention of the high crystallinity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗