Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solar Radiation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Arctic haze and the radiation balance

Airborne measurements of the absorption of solar radiation by the Arctic haze indicate atmospheric heating rates of 0.15 to 0.25/Kday at latitudes between 72.6 and 74.0 N during the early spring. The haze interaction with solar radiation alters the radiative balance of the atmosphere-surface system. Generally, this interaction results in an increase of the solar energy absorbed by the atmosphere and in a decrease of the radiation absorbed by the ground. The cumulative deposition of black carbon over the surface produces a change in the optical properties of the ice which may results in an accelerating rate of ice melt. Experimental evidence of the magnitude of this effect is necessary to properly evaluate its consequences. An extended monitoring program is suggested.

Valero, Francisco P. J.↗

Backscatter of solar resonance radiation. II.

Calculated curves are presented for the intensity of the scattered solar Lyman alpha radiation as it would be observed at various distances from the sun by a deep space probe during the late 1970s and early 1980s. Near the sun, most of the neutral gas, and hence the emission maximum, is in the pole direction. At 2 AU from the sun, the maximum is quite broad. At greater heliocentric distances, most of the emission lies between the probe and the sun; thus, the angle which the emission maximum makes with the pole increases steadily as the probe moves out.

Johnson, H. E.↗

Machine Learning Algorithms for Aerosol and Cloud Detection Using CATS on the ISS

Clouds and aerosols are one of the largest uncertainties in understanding and forecasting the Earth’s changing climate system. The type and height of aerosols are important factors in determining the top-of-atmosphere (TOA) radiation budget, either direct reflection of solar radiation back to space and/or absorption of solar radiation. In addition to their impact on the Earth’s climate system, aerosols near the surface from wildfires, man-made pollution events, and dust storms are hazardous to human health. The phase and height of clouds also play a critical role in determining the role of clouds in the Earth’s climate system. Cirrus clouds in the upper troposphere can induce a significant daytime TOA warming effect, while liquid water clouds near the surface cause a large corresponding cooling effect. Lidar measurements provide accurate vertically resolved information about clouds and aerosols, including complex multi-layer scenes where passive sensors are challenged and at night, when passive sensors are unable to measure cloud and aerosol properties. The Cloud-Aerosol Transport System (CATS) is a lidar instrument that operated for 33 months on the International Space Station (ISS) at the 1064 nm wavelength to measure attenuated total backscatter and depolarization ratio. These fundamental measurements are used to derive “vertical feature mask” cloud and aerosol products, including layer top/base heights, layer geometrical thickness, aerosol type, and cloud phase. While space-based lidar systems like CATS provide cloud and aerosol vertical distributions that improve our understanding of the climate system, averaging of the daytime data from these sensors is required, at the expense of spatial resolution, to improve the daytime signal-to noise (SNR) and thus atmospheric layer detection. This presentation shows results from machine learning (ML) techniques that, when applied to CATS data: 1. improve the 1064 nm SNR 2. enable detection of atmospheric features during daytime with a horizontal resolution of 350 m or 5 km (compared to the 60 km required for standard CATS data products) 3. increase the number of atmospheric layers detected in the CATS data. A Convolutional Neural Network (CNN) trained using CATS standard data products also demonstrated the potential for improved cloud-aerosol discrimination, cloud phase, and aerosol typing compared to the operational CATS algorithms for cloud edges and complex near-surface scenes during daytime. The ML tools described in this paper can facilitate the development of smaller, low-cost lidar systems in the future and enable real-time accessibility of lidar data products from future lidar systems for monitoring and forecasting of hazardous events.

John Yorks↗

Advantage of multi-band solar-induced chlorophyll fluorescence to derive canopy photosynthesis in a temperate forest

When solar-induced chlorophyll fluorescence (SIF) is developed as a novel approach to quantify gross primary production (GPP), narrow SIF emission spectrum around the atmospheric oxygen absorption windows (˜ 761 nm and ˜687 nm) has been widely used to represent SIF and to derive GPP. As SIF is a continuous spectrum, deriving the full broadband SIF emission spectrum over 640–850 nm provides an opportunity to fully explore the potential of SIF in estimating GPP. Using high-frequency measurements of canopy carbon flux and SIF emissions at the atmospheric absorption bands, here we reconstruct the full SIF spectrum from SIF signals at the absorption bands, and then analyze correlations between the GPP and the selected single SIF bands and their combinations using both linear regression (LR) and Gaussian processes regression (GPR). Our results indicate that (1) the red SIF bands (640–700 nm) shows low correlation with GPP due to the strong (re)absorption of red SIF emissions by leaf chlorophyll; (2) the individual bands in near-infrared area (at 720 nm, 740 nm, and 761 nm) can determine about 60% and 62% of the variance in GPP with hourly scale by LR and GPR, respectively, and the combination of those SIF bands provide increased predictive power, explaining 66% and 76% variance in GPP with hourly scale by LR and GPR, respectively; (3) the solar radiation saturation, fraction of direct solar radiation, air temperature and leaf area index may have negative impacts on the SIF-GPP correlations when they are beyond optimal thresholds; and (4) the temporal aggregation of SIF-GPP (daily scale) enhances the correlations as compared with the hourly scale: the daily combination of SIF bands (at 687 nm, 720 nm, and 761 nm) can account for 80% and 93% of variance in daily daytime GPP by LR and GPR, respectively, suggesting that the combination of these three bands of SIF on the daily scale is the best proxy for GPP. Our results provide a new approach to analyze the SIF-GPP correlations using the ground-based full broadband SIF emission, suggesting that multi-bands SIF has a stronger capacity in predicting plant GPP than traditionally used signal band SIF data.

54 ENVIRONMENTAL SCIENCES↗

Monitoring primary production in the Sahel with AVHRR observations

Field and satellite measurements made in the Gourma region of Mali in 1986 are analyzed. A comprehensive model for the relationship between vegetation indices and primary production is described, and findings are made on primary production, solar radiation, normalized difference vegetation indices, and the efficiency of photosynthetic fixation of solar radiation. The model appears to provide a reasonable description of the gross production. By omitting variables form the model the relative significance of each one can be assessed, and it turns out that both the corrections made to the AVHRR data and the inclusion of daily solar radiation integrals are much less important than are the satellite NDVI measurements.

Prince, Stephen D.↗

Toward Realistic Dynamics of Rotating Orbital Debris, and Implications for Lightcurve Interpretation

Optical observations of rotating space debris near GEO contain important information on size, shape, composition, and rotational states, but these aspects are difficult to extract due to data limitations and the high number of degrees of freedom in the modeling process. For tri-axial rigid debris objects created by satellite fragmentations, the most likely initial rotation state has a large component of initial angular velocity directed along the intermediate axis of inertia, leading to large angular reorientations of the body on the timescale of the rotation period. This lends some support to the simplest possible interpretation of light curves -- that they represent sets of random orientations of the objects of study. However, effects of internal friction and solar radiation are likely to cause significant modification of rotation states within a time as short as a few orbital periods. In order to examine the rotational dynamics of debris objects under the influences of these effects, a set of seven first-order coupled equations of motion were assembled in state form: three are Euler equations describing the rates of change of the components of angular velocity in the body frame, and four describe the rates of change of the components of the unit quaternion. Quaternions are a four-dimensional extension of complex numbers that form a seamless, singularity-free representation of body orientation on S3. The Euler equations contain explicit terms describing torque from solar radiation in terms of spherical harmonics, and terms representing effects of a prescribed rate of internal friction. Numerical integrations of these equations of motion are being performed, and results will be presented. Initial tests show that internal friction without solar radiation torque leads to rotation about the maximum principal axis of inertia, as required, and solar radiation torque is expected to lead to spin-up of objects. Because the axis of maximum rotational inertia tends to be roughly coincident with the normal to the largest projected cross-sectional area, internal friction is expected to lead to reduced variation of light curve amplitudes at a given phase angle, but a large dependence of the same on phase angle. At a given phase angle, databases are generated which contain reflected intensities for comprehensive sets of equally-likely orientations, represented as unit quaternions. When projected onto three dimensions (S2) and color-coded by intensity, the set is depicted as points within a solid, semi-transparent unit sphere, within which all possible reflected intensities for an object at a given phase angle may be inspected simultaneously. Rotational sequences are represented by trajectories through the sphere. Databases are generated for each of a set of phase angles separately, forming a comprehensive dataset of reflected intensities spanning all object orientations and solar phase angles. Symmetries in the problem suggest that preferred rotation states are likely, defined relative to the object-sun direction in inertial space and relative to the maximum principal axis of inertia in the body coordinate system. Such rotation states may greatly simplify the problem of light curve interpretation by reducing the number of degrees of freedom in the problem.

Ojakangas, Gregory W.↗

Response of the Land-Atmosphere System Over North-Central Oklahoma During the 2017 Eclipse

On 21 August 2017, a solar eclipse occurred over the continental United States resulting in a rapid reduction and subsequent increase of solar radiation over a large region of the country. The eclipse’s effect on the land-atmosphere system is documented in unprecedented detail using a unique array of sensors deployed at three sites in north-central Oklahoma. The observations showed that turbulent fluxes of heat and momentum at the surface responded quickly to the change in solar radiation. The decrease in the sensible heat flux resulted in a decrease in the air temperature below 200 m, and a large decrease in turbulent motions throughout the boundary layer. Furthermore, the turbulent mixing in the boundary layer lagged behind the change in the surface fluxes, and this lag depended on the height above the surface. The turbulent motions increased and the convective boundary layer was reestablished as the sensible heat flux recovered.

Turner, D. D.↗

Multiple scattering of solar resonance radiation in the nearby interstellar medium. I

The paper presents approximate solutions obtained for a radiative transfer problem that represents a highly-idealized description of the multiple scattering of solar resonance radiation in the nearby interstellar medium. The problem of a point source in the center of a spherically symmetric cavity imbedded in an infinite uniform medium is solved for a range of cavity radii. First and second-order scattering contributions are calculated, and the Eddington approximation is used to estimate the higher order components of the radiation field. It is shown that for coherent scattering at very large cavity radii, the backscattered intensity from the cavity approaches three times the value deduced from the optically thin solution, in agreement with previous work. It is concluded that an accurate analysis of sky background will require including not only the frequency redistribution, but also the correct spatial distribution of density.

Keller, H. U.↗

Increasing the solar photovoltaic energy capture on sunny and cloudy days

This report analyzes an extensive set of measurements of the solar irradiance made using four identical solar arrays and associated solar sensors (collectively referred to as solar collectors) with different tilt angles relative to the earth's surface, and thus the position of the sun, in order to determine an optimal tracking algorithm for capturing solar radiation. The study included a variety of ambient conditions including different seasons and both cloudy and cloud-free conditions. One set of solar collectors was always approximately pointed directly toward the sun (DTS) for a period around solar noon. These solar collectors thus captured the direct beam component of the solar radiation that predominates on sunny days. We found that on sunny days, solar collectors with a DTS configuration captured more solar energy in accordance with the well-known cosine dependence for the response of a flat-surfaced solar collector to the angle of incidence with direct beam radiation. In particular, a DTS orientation was found to capture up to twice as much solar energy as a horizontal (H) orientation in which the array is tilted toward the zenith. Another set of solar collectors always had an H orientation, and this best captured the diffuse component of the solar radiation that predominates on cloudy days. The dependence of the H/DTS ratio on the solar-collector tilt angle was in approximate agreement with the Isotropic Diffuse Model derived for heavily overcast conditions. During cloudy periods, we found that an H configuration increased the solar energy capture by nearly 40% compared to a DTS configuration during the same period, and we estimate the solar energy increase of an H configuration over a system that tracks the obscured solar disk could reach 50% over a whole heavily-overcast day. On an annual basis the increase is predicted to be much less, typically only about 1%, because the contribution of cloudy days to the total annual solar energy captured by a photovoltaic system is small. These results are consistent with the solar tracking algorithm optimized for cloudy conditions that we proposed in an earlier report and that was based on a much smaller data set. Improving the harvesting of solar energy on cloudy days deserves wider attention due to increasing efforts to utilize renewable solar energy. In particular, increasing the output of distributed solar power systems on cloudy days is important to developing solar-powered home fueling and charging systems for hydrogen-powered fuel-cell electric and battery-powered vehicles, respectively, because it reduces the system size and cost for solar power systems that are designed to have sufficient energy output on the worst (cloudy) days. (author)

14 SOLAR ENERGY↗

Use of satellites to determine optimum locations for solar power stations

Ground measurements of solar radiation are too sparse to determine important mesoscale differences that can be of major significance in solar power station locations. Cloud images in the visual spectrum from the SMS/GOES geostationary satellites are used to determine the hourly distribution of sunshine on a mesoscale in the continental United States excluding Alaska. Cloud coverage and density as a function of time of day and season are considered through the use of digital data processing techniques. Low density cirrus clouds are less detrimental to solar energy collection than other types; and clouds in the morning and evening are less detrimental than those during midday hours of maximum insolation. The seasonal geographic distributions of sunshine are converted to Langleys of solar radiation received at the earth's surface through the use of transform equations developed from long-term measurements of these two parameters at 18 widely distributed stations. The high correlation between measurements of sunshine and radiation makes this possible. The output product will be maps showing the geographic distribution of total solar radiation on the mesoscale which is received at the earth's surface during each season.

Hiser, H. W.↗

Solar Eclipse Monitoring for Solar Energy Applications Using the Solar and Moon Position Algorithms

This report includes a procedure for implementing an algorithm (described by Jean Meeus) to calculate the moon's zenith angle with uncertainty of +/-0.001 degrees and azimuth angle with uncertainty of +/-0.003 degrees. The step-by-step format presented here simplifies the complicated steps Meeus describes to calculate the Moon's position, and focuses on the Moon instead of the planets and stars. It also introduces some changes to accommodate for solar radiation applications.

14 SOLAR ENERGY↗

Land Surface Cooling Induced by Sulfate Geoengineering Constrained by Major Volcanic Eruptions

Based on observations of large volcanic eruptions1 and dedicated model simulations2, solar radiation management by stratospheric sulfate aerosol injection (SRM-SAI) is thought to be one of the most promising methods to counteract anthropogenic global warming3. However, coordinated simulations of SRM-SAI using Earth System Models (ESMs) reveal fundamental uncertainties in the climate response to geoengineering, including global cooling and any resulting risks to natural and human ecosystems. Here we identify an emergent relationship4,5,6,7 linking the long-term global land surface cooling due to SRM-SAI and the short-term cooling following the 20th century major volcanic eruptions across an ESM ensemble. This emergent relationship, combined with observations and reanalysis, is used to constrain the global land surface temperature (GLST) response to reduced downward solar radiation. Based on these constraints, we find that GLST decreases by approximately 0.43 K per W.m-2 ([0.18,0.67]), which is 22% smaller in magnitude than the model mean of an unconstrained ensemble of ESMs simulating SRM-SAI and 46% smaller in magnitude than some past estimates8. These new estimates may affect how trade-offs between cost, risk and effectiveness of SRM-SAI might be considered.

Plazzotta, Maxime↗

Isoprene emissions over Asia 1979–2012: impact of climate and land-use changes

Due to the scarcity of observational constraints and the rapidly changing environment in East and Southeast Asia, isoprene emissions predicted by models are expected to bear substantial uncertainties. The aim of this study is to improve upon the existing bottom-up estimates, and to investigate the temporal evolution of the fluxes in Asia over 1979–2012. To this purpose, we calculate the hourly emissions at 0.5°×0.5° resolution using the MEGAN–MOHYCAN model driven by ECMWF ERA-Interim climatology. In order to remedy for known biases identified in previous studies, and to improve the simulation of interannual variability and trends in emissions, this study incorporates (i) changes in land use, including the rapid expansion of oil palms, (ii) meteorological variability according to ERA-Interim, (iii) long-term changes in solar radiation (dimming/brightening) constrained by surface network radiation measurements, and (iv) recent experimental evidence that South Asian tropical forests are much weaker isoprene emitters than previously assumed, and on the other hand, that oil palms have a strong isoprene emission capacity. These effects lead to a significant lowering (factor of 2) in the total isoprene fluxes over the studied domain, and to emission reductions reaching a factor of 3.5 in Southeast Asia. The bottom-up annual isoprene emissions for 2005 are estimated at 7.0, 4.8, 8.3, and 2.9 Tg in China, India, Indonesia and Malaysia, respectively. The isoprene flux anomaly over the whole domain and studied period is found to be strongly correlated with the Oceanic Niño Index (r = 0.73), with positive (negative) anomalies related to El Niño (La Niña) years. Changes in temperature and solar radiation are the major drivers of the interannual variability and trends in the emissions, except over semi-arid areas such as northwestern China, Pakistan and Kazakhstan, where soil moisture is by far the main cause of interannual emission changes. In our base simulation, annual positive flux trends of 0.2% and 0.52% throughout the entire period are found in Asia and China, respectively, related to a positive trend in temperature and solar radiation. The impact of oil palm expansion in Indonesia and Malaysia is to enhance the trends over that region, e.g., from 1.17% to 1.5% in 1979–2005 in Malaysia. A negative emission trend is derived in India (-0.4%), owing to the negative trend in solar radiation data associated with the strong dimming effect likely due to increasing aerosol loadings. The bottom-up emissions are compared to field campaign measurements in Borneo and South China and further evaluated against top-down isoprene emission estimates constrained by GOME-2/MetOp-A formaldehyde columns through 2007–2012. The satellite-based estimates appear to support our assumptions, and confirm the lower emission rate in tropical forests of Indonesia and Malaysia. Additional flux measurements are clearly needed to characterize the spatial variability of emission factors better. To conclude, a decreasing trend in the inferred top-down Chinese emissions since 2007 is in line with recorded cooling in China after that year, thus suggesting that the satellite HCHO columns are able to capture climate-induced changes in emissions.

Stavrakou, T.↗

Evaluation of thermal control coatings for use on solar dynamic radiators in low Earth orbit

Thermal control coatings with high thermal emittance and low solar absorptance are needed for Space Station Freedom (SSF) solar dynamic power module radiator (SDR) surfaces for efficient heat rejection. Additionally, these coatings must be durable to low earth orbital (LEO) environmental effects of atomic oxygen, ultraviolet radiation and deep thermal cycles which occur as a result of start-up and shut-down of the solar dynamic power system. Eleven candidate coatings were characterized for their solar absorptance and emittance before and after exposure to ultraviolet (UV) radiation (200 to 400 nm), vacuum UV (VUV) radiation (100 to 200 nm) and atomic oxygen. Results indicated that the most durable and best performing coatings were white paint thermal control coatings Z-93, zinc oxide pigment in potassium silicate binder, and YB-71, zinc orthotitanate pigment in potassium silicate binder. Optical micrographs of these materials exposed to the individual environmental effects of atomic oxygen and vacuum thermal cycling showed that no surface cracking occurred.

Dever, Joyce A.↗

Evaluation of thermal control coatings for use on solar dynamic radiators in low earth orbit

Thermal control coatings with high thermal emittance and low solar absorptance are needed for Space Station Freedom (SSF) solar dynamic power module radiator (SDR) surfaces for efficient heat rejection. Additionally, these coatings must be durable to low earth orbital (LEO) environmental effects of atomic oxygen, ultraviolet radiation and deep thermal cycles which occur as a result of start-up and shut-down of the solar dynamic power system. Eleven candidate coatings were characterized for their solar absorptance and emittance before and after exposure to ultraviolet (UV) radiation (200 to 400 nm), vacuum UV (VUV) radiation (100 to 200 nm) and atomic oxygen. Results indicated that the most durable and best performing coatings were white paint thermal control coatings Z-93, zinc oxide pigment in potassium silicate binder, and YB-71, zinc orthotitanate pigment in potassium silicate binder. Optical micrographs of these materials exposed to the individual environmental effects of atomic oxygen and vacuum thermal cycling showed that no surface cracking occurred.

Dever, Joyce A.↗