Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Simulation Fidelity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Optimal regulator or conventional? Setup techniques for a model following simulator control system

Optimal regulator technique was compared for determining simulator control system gains with the conventional servo analysis approach. Practical considerations, associated with airborne motion simulation using a model-following system, provided the basis for comparison. The simulation fidelity specifications selected were important in evaluating the relative advantages of the two methods. Frequency responses for a JetStar aircraft following a roll mode model were calculated digitally to illustrate the various cases. A technique for generating forward loop lead in the optimal regulator model-following problem was developed which increases the flexibility of that approach. It appeared to be the only way in which the optimal regulator method could meet the fidelity specifications.

Deets, D. A.↗

V/STOL aircraft simulation - Requirements and capabilities at Ames Research Center

Ground-based flight simulation contributes greatly to the development of new aircraft and flight management systems and will be especially important in improving the performance, safety, and environmental characteristics of future civil and military V/STOL aircraft. This paper describes existing simulation facilities at Ames Research Center and discusses their capabilities and limitations for V/STOL aircraft investigations. Simulation requirements for NASA research and support of DOD programs are also discussed, including technology development for advanced rotorcraft and civil and military V/STOL aircraft. Current efforts and future plans are described for the upgrading of Ames simulation facilities to meet those requirements. Recent advances in equipment technology and operational methodology are shown to provide significantly improved simulation fidelity through better motion and visual cues and faster system response to pilot inputs.

Wilcox, D. E.↗

Determination of ASPS performance for large payloads in the shuttle orbiter disturbance environment

A high fidelity simulation of the annular suspension and pointing system (ASPS), its payload, and the shuttle orbiter was used to define the worst case orientations of the ASPS and its payload for the various vehicle disturbances, and to determine the performance capability of the ASPS under these conditions. The most demanding and largest proposed payload, the Solar Optical Telescope was selected for study. It was found that, in all cases, the ASPS more than satisfied the payload's requirements. It is concluded that, to satisfy facility class payload requirements, the ASPS or a shuttle orbiter free-drift mode (control system off) should be utilized.

Keckler, C. R.↗

Recent Progress Towards Predicting Aircraft Ground Handling Performance

The significant progress which has been achieved in development of aircraft ground handling simulation capability is reviewed and additional improvements in software modeling identified. The problem associated with providing necessary simulator input data for adequate modeling of aircraft tire/runway friction behavior is discussed and efforts to improve this complex model, and hence simulator fidelity, are described. Aircraft braking performance data obtained on several wet runway surfaces is compared to ground vehicle friction measurements and, by use of empirically derived methods, good agreement between actual and estimated aircraft braking friction from ground vehilce data is shown. The performance of a relatively new friction measuring device, the friction tester, showed great promise in providing data applicable to aircraft friction performance. Additional research efforts to improve methods of predicting tire friction performance are discussed including use of an instrumented tire test vehicle to expand the tire friction data bank and a study of surface texture measurement techniques.

Yager, T. J.↗

Recent progress towards predicting aircraft ground handling performance

Capability implemented in simulating aircraft ground handling performance is reviewed and areas for further expansion and improvement are identified. Problems associated with providing necessary simulator input data for adequate modeling of aircraft tire/runway friction behavior are discussed and efforts to improve tire/runway friction definition, and simulator fidelity are described. Aircraft braking performance data obtained on several wet runway surfaces are compared to ground vehicle friction measurements. Research to improve methods of predicting tire friction performance are discussed.

Yager, T. J.↗

Development of electrical test procedures for qualification of spacecraft against EID. Volume 1: The CAN test and other relevant data

A combined experimental and analytical program to develop system electrical test procedures for the qualification of spacecraft against damage produced by space-electron-induced discharges (EID) occurring on spacecraft dielectric outer surfaces is described. The data on the response of a simple satellite model, called CAN, to electron-induced discharges is presented. The experimental results were compared to predicted behavior and to the response of the CAN to electrical injection techniques simulating blowoff and arc discharges. Also included is a review of significant results from other ground tests and the P78-2 program to form a data base from which is specified those test procedures which optimally simulate the response of spacecraft to EID. The electrical and electron spraying test data were evaluated to provide a first-cut determination of the best methods for performance of electrical excitation qualification tests from the point of view of simulation fidelity.

Wilkenfeld, J. M.↗

Frequency-domain identification of XV-15 tilt-rotor aircraft dynamics

Frequency-domain methods are used to identify the open-loop dynamics of the XV-15 tilt-rotor aircraft from flight tests. Piloting and data analysis techniques are presented to determine frequency response plots and equivalent transfer function models. The open-loop pitch and roll dynamics for the hover flight condition exhibit unstable low-frequency oscillations, whereas the dynamics in the remaining degrees of freedom are lightly damped and generally decoupled. Comparisons of SV-13 flight-test and simulator data are more favorable for high-frequency inputs (omega greater than 1.0 rad/sec) than low-frequency inputs. The identification of symmetric and asymmetric beam-bending modes compares favorably with previous flight-test data. The results presented in this paper demonstrate the utility of the frequency-domain techniques for dynamics identification and simulator fidelity studies.

Tischler, M. B.↗

Quantification of crew workload imposed by communications-related tasks in commercial transport aircraft

Information theoretic analysis and subjective paired-comparison and task ranking techniques were employed in order to scale the workload of 20 communications-related tasks frequently performed by the captain and first officer of transport category aircraft. Tasks were drawn from taped conversations between aircraft and air traffic controllers (ATC). Twenty crewmembers performed subjective message comparisons and task rankings on the basis of workload. Information theoretic results indicated a broad range of task difficulty levels, and substantial differences between captain and first officer workload levels. Preliminary subjective data tended to corroborate these results. A hybrid scale reflecting the results of both the analytical and the subjective techniques is currently being developed. The findings will be used to select representative sets of communications for use in high fidelity simulation.

Acton, W. H.↗

A modal reduction method for use with nonlinear simulations of flexible multibody spacecraft

This paper presents a modal truncation method that can be used to prepare the structural flexibility data required as input to flexible, multibody spacecraft simulation programs. The method allows one to truncate the structural models of each flexible body in the system such that the assembled system is free of undesired high frequency system modes. This truncation method enables reasonable simulation costs to be incurred while maintaining dynamic simulation fidelity in the frequency range of interest. A simple one-dimensional example is presented which provides a physical interpretation of the method's workings. In addition, results are presented from the application of the method to a complex spacecraft.

Macala, G. A.↗

The influence of sampling rate on the dynamics and control of aeronautical systems

It is shown in the design of aeronautical control systems that sampling rate variations give rise to migrations of the discrete eigenvalues for both the plant and the controllers. In general, these migrations tend to degrade simulation fidelity and the overall performance of Ultrareliable Fault Tolerant Control Systems (UFTCS). These systems consist of a redundant asynchronous network of microprocessors which use sensor information to generate the servo commands that drive actuators, thrust linkages, etc. A change in the sampling period of a single microprocessor will, in addition to causing an eigenvalue shift, alter the magnitude of the servo command issued by the controller. The influence of these changes and the effect of initial conditions and skew are considered.

Howard, J. C.↗

Prototype space station automation system delivered and demonstrated at NASA

The Automated Subsystem Control for Life Support System (ASCLSS) program has successfully developed and demonstrated a generic approach to the automation and control of Space Station subsystems. The hierarchical and distributed real time controls system places the required controls authority at every level of the automation system architecture. As a demonstration of the automation technique, the ASCLSS system automated the Air Revitalization Group (ARG) of the Space Station regenerative Environmental Control and Life Support System (ECLSS) using real-time, high fidelity simulators of the ARG processess. This automation system represents an early flight prototype and an important test bed for evaluating Space Station controls technology including future application of ADA software in real-time control and the development and demonstration of embedded artificial intelligence and expert systems (AI/ES) in distributed automation and controls systems.

Block, Roger F.↗

Multimodal user input to supervisory control systems - Voice-augmented keyboard

The use of a voice-augmented keyboard input modality is evaluated in a supervisory control application. An implementation of voice recognition technology in supervisory control is proposed: voice is used to request display pages, while the keyboard is used to input system reconfiguration commands. Twenty participants controlled GT-MSOCC, a high-fidelity simulation of the operator interface to a NASA ground control system, via a workstation equipped with either a single keyboard or a voice-augmented keyboard. Experimental results showed that in all cases where significant performance differences occurred, performance with the voice-augmented keyboard modality was inferior to and had greater variance than the keyboard-only modality. These results suggest that current moderately priced voice recognition systems are an inappropriate human-computer interaction technology in supervisory control systems.

Mitchell, Christine M.↗

The development of an automated flight test management system for flight test planning and monitoring

The development of an automated flight test management system (ATMS) as a component of a rapid-prototyping flight research facility for AI-based flight systems concepts is described. The rapid-prototyping facility includes real-time high-fidelity simulators, numeric and symbolic processors, and high-performance research aircraft modified to accept commands for a ground-based remotely augmented vehicle facility. The flight system configuration of the ATMS includes three computers: the TI explorer LX and two GOULD SEL 32/27s.

Hewett, Marle D.↗

The Shane Wirtanen counts - Observability of the galaxy correlation function

An explicit test of the ability of the galaxy two-point correlation function to be recovered from the Lick counts of galaxies (Shane and Wirtanen, 1967) is reported. High-fidelity simulations are created, starting with the distribution of galaxies in space. These distributions are projected onto a set of simulated Lick plates which are reduced to a uniform limiting magnitude with the method of Seldner et al. (1977). The simulated catalogs are then analyzed with the methods of Groth and Peebles (1977). The resulting correlation functions are found to reproduce accurately the correlation functions that were built in during the first step of the simulations.

Brown, Michael E.↗

A pointing system design concept for Space Station attached payloads

A study has been conducted to recommend a pointing system design and architecture that can accommodate the articulated pointing requirements levied on the Space Station Freedom Attached Payload Pointing System. A conceptual design of a control system is developed using classical rate and position control techniques. A high fidelity simulation testbed has been developed as the principal tool for the pointing performance evaluation. Techniques of model reduction are applied to reduce the model order to a manageable size for incorporation into the testbed. The disturbance rich space station environment has been modeled, and nonlinearities such as bearing friction, motor and sensor noise are also considered. Simulations were performed with representatie payloads at nominal pointing orientations. The results show that the tight instrument pointing requirements and the severe Space Station disturbance environment render a marginal performance for a conventional (direct drive and hardmount) gimbal pointing system, particularly for lightweight payloads. A gimbal system that incorporates a passive base isolator and reactionless actuation appears to provide a significant imporvement in pointing performance over the conventional pointing systems.

Wong, Edward↗

A comparison of ground-based and space flight data: Atomic oxygen reactions with boron nitride and silicon nitride

The effects of atomic oxygen on boron nitride (BN) and silicon nitride (Si3N4) have been studied in low Earth orbit (LEO) flight experiments and in a ground-based simulation facility at Los Alamos National Laboratory. Both the in-flight and ground-based experiments employed the materials coated over thin (approx 250 Angstrom) silver films whose electrical resistance was measured in situ to detect penetration of atomic oxygen through the BN and Si3N4 materials. In the presence of atomic oxygen, silver oxidizes to form silver oxide, which has a much higher electrical resistance than pure silver. Permeation of atomic oxygen through BN, as indicated by an increase in the electrical resistance of the silver underneath, was observed in both the in-flight and ground-based experiments. In contrast, no permeation of atomic oxygen through Si3N4 was observed in either the in-flight or ground-based experiments. The ground-based results show good qualitative correlation with the LEO flight results, thus validating the simulation fidelity of the ground-based facility in terms of reproducing LEO flight results.

Cross, J. B.↗

Icing simulation: A survey of computer models and experimental facilities

A survey of the current methods for simulation of the response of an aircraft or aircraft subsystem to an icing encounter is presented. The topics discussed include a computer code modeling of aircraft icing and performance degradation, an evaluation of experimental facility simulation capabilities, and ice protection system evaluation tests in simulated icing conditions. Current research focussed on upgrading simulation fidelity of both experimental and computational methods is discussed. The need for increased understanding of the physical processes governing ice accretion, ice shedding, and iced airfoil aerodynamics is examined.

Potapczuk, M. G.↗

Comparisons of elastic and rigid blade-element rotor models using parallel processing technology for piloted simulations

A piloted comparison of rigid and aeroelastic blade-element rotor models was conducted at the Crew Station Research and Development Facility (CSRDF) at Ames Research Center. A simulation development and analysis tool, FLIGHTLAB, was used to implement these models in real time using parallel processing technology. Pilot comments and quantitative analysis performed both on-line and off-line confirmed that elastic degrees of freedom significantly affect perceived handling qualities. Trim comparisons show improved correlation with flight test data when elastic modes are modeled. The results demonstrate the efficiency with which the mathematical modeling sophistication of existing simulation facilities can be upgraded using parallel processing, and the importance of these upgrades to simulation fidelity.

Hill, Gary↗