Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sample Calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Effect Of Neodymium Substitution In Structural Characteristics Of Magnesium Ferrite

The effect of Nd{sup 3+} substitution on the structural properties of Magnesium ferrite was studied in the series MgNd{sub x}Fe{sub 2-x}O{sub 4}, where x = 0 to 0.3 in steps of 0.05. The series was prepared by sol-gel technique which is one of the novel technique to prepare nanosized samples. Structural characterization was done using X-ray diffractometer and Fourier Transform Infrared Spectrometer. XRD analysis reveals the prepared samples are single phasic till x = 0.2. From x0 = .25, a secondary phase of iron neodymium oxide appears along with the spinel phase. Particle size calculation shows the prepared samples are in the 9nm to 11 nm regime. Lattice parameter was found to increase with concentration of Nd. XRD and FTIR analysis confirmed spinel structure of the prepared samples. XRF result shows the expected composition of prepared samples. The frequency dependence of the dielectric constant in the range 100 Hz--120MHz was also studied

36 MATERIALS SCIENCE↗

Eruption mass estimation using infrasound waveform inversion and ash and gas measurements: Evaluation at Sakurajima Volcano, Japan [Comparison of eruption masses at Sakurajima Volcano, Japan calculated by infrasound waveform inversion and ground-based sampling]

Eruption mass and mass flow rate are critical parameters for determining the aerial extent and hazard of volcanic emissions. Infrasound waveform inversion is a promising technique to quantify volcanic emissions. Although topography may substantially alter the infrasound waveform as it propagates, advances in wave propagation modeling and station coverage permit robust inversion of infrasound data from volcanic explosions. The inversion can estimate eruption mass flow rate and total eruption mass if the flow density is known. However, infrasound-based eruption flow rates and mass estimates have yet to be validated against independent measurements, and numerical modeling has only recently been applied to the inversion technique. Furthermore we present a robust full-waveform acoustic inversion method, and use it to calculate eruption flow rates and masses from 49 explosions from Sakurajima Volcano, Japan.

58 GEOSCIENCES↗

Red Noise–based False Alarm Thresholds for Astrophysical Periodograms via Whittle’s Approximation to the Likelihood

Astronomers who search for periodic signals using Lomb–Scargle periodograms rely on false alarm level (FAL) estimates to identify statistically significant peaks. Although FALs are often calculated from white noise models, many astronomical time series suffer from red noise. Prewhitening is a statistical technique in which a continuum model is subtracted from the log power spectrum estimate, after which the observer can proceed with a white-noise treatment. Here we present a prewhitening-based method of calculating frequency-dependent FALs. We fit power laws and autoregressive models of order 1 to each Lomb–Scargle periodogram by minimizing the Whittle approximation to the negative log-likelihood (NLL), then calculate FALs based on the best-fit model power spectrum. Our technique is a novel extension of the Whittle NLL to datasets with uneven time sampling. We demonstrate FAL calculations using observations of α Cen B, GJ 581, HD 192310, synthetic data from the radial velocity (RV) fitting challenge, and Kepler observations of a differential rotator. The Kepler data analysis shows that only true rotation signals are detected by red noise FALs, while white noise FALs suggest all spurious peaks in the low-frequency range are significant. A high-frequency sinusoid injected into α Cen B logR$'$ HK observations exceeds the 1% red noise FAL despite having only 8.9% of the power of the dominant rotation signal. In a periodogram of HD 192310 RVs, peaks associated with differential rotation and planets are detected against the 5% red noise FAL without iterative model fitting or subtraction. The software for calculating red noise–based FALs is available on GitHub.

Astrostatistics (1882)↗

Total Recoverable Aluminum: Not Totally Relevant for Water Quality Standards

Abstract A large water quality data set, representing more than 100 surface-water locations sampled from 2007 to 2017 in the Los Alamos area of New Mexico, USA's Pajarito Plateau, was assembled to evaluate Al concentrations in unfiltered and filtered samples. Aluminum concentrations often exceeded United States Environmental Protection Agency (USEPA) and New Mexico ambient water quality criteria (AWQC), regardless of filter size and sample location. However, AWQC are based on laboratory toxicity studies using soluble Al salts and do not reflect natural conditions in Pajarito Plateau surface waters. The plateau is predominately covered by glassy and recrystallized volcanic ashes (e.g., Bandelier Tuff) containing colloidal to sand-sized aluminosilicates. Samples from natural background drainages and areas downstream of developed regions exhibited similar Al concentrations, suggesting that AWQC exceedances are caused by naturally elevated Al concentrations. Solubility calculations indicated that most samples were oversaturated with respect to amorphous Al(OH)3(s). Therefore, AWQC exceedances are likely artifacts of the “total recoverable” sample preparation, which includes acidification and partial digestion, thereby liberating nonbioavailable Al from aluminosilicates. Accordingly, Al concentrations were strongly associated with suspended sediment concentrations (SSCs), implying that aluminosilicates in suspended sediment contributed to AWQC exceedances and Al oversaturation. Solid-phase particle characterization, using X-ray diffraction (XRD) and scanning electron microscopy with electron dispersive spectroscopy (SEM/EDS) did not identify potentially bioavailable amorphous Al(OH)3(s) in any sample tested. Thus, current sample collection and analysis protocols should not be used to evaluate attainment of Al AWQC on the Pajarito Plateau or locations where aluminosilicates are substantial contributors to total recoverable Al. A sample preparation method (e.g., pH 4 extraction) capable of differentiating nonbioavailable and bioavailable forms of Al is recommended. Otherwise, current New Mexico and USEPA sample preparation approaches will continue to generate artifactual AWQC exceedances in surface waters that contain aluminosilicates. Integr Environ Assess Manag 2019;00:1–14. © 2019 SETAC

Ryan, Adam C.↗

Uncertainty quantification of CO₂ saturation estimated from electrical resistance tomography data at the Cranfield site

A parametric bootstrap approach is presented for uncertainty quantification (UQ) of CO₂ saturation derived from electrical resistance tomography (ERT) data collected at the Cranfield, Mississippi (USA) carbon sequestration site. There are many sources of uncertainty in ERT-derived CO₂ saturation, but we focus on how the ERT observation errors propagate to the estimated CO₂ saturation in a nonlinear inversion process. Our UQ approach consists of three steps. We first estimated the observational errors from a large number of reciprocal ERT measurements. The second step was to invert the pre-injection baseline data and the resulting resistivity tomograph was used as the prior information for nonlinear inversion of time-lapse data. We assigned a 3% random noise to the baseline model. Finally, we used a parametric bootstrap method to obtain bootstrap CO₂ saturation samples by deterministically solving a nonlinear inverse problem many times with resampled data and resampled baseline models. Then the mean and standard deviation of CO₂ saturation were calculated from the bootstrap samples. We found that the maximum standard deviation of CO₂ saturation was around 6% with a corresponding maximum saturation of 30% for a data set collected 100 days after injection began. There was no apparent spatial correlation between the mean and standard deviation of CO₂ saturation but the standard deviation values increased with time as the saturation increased. The uncertainty in CO₂ saturation also depends on the ERT reciprocal error threshold used to identify and remove noisy data and inversion constraints such as temporal roughness. Five hundred realizations requiring 3.5 h on a single 12-core node were needed for the nonlinear Monte Carlo inversion to arrive at stationary variances while the Markov Chain Monte Carlo (MCMC) stochastic inverse approach may expend days for a global search. This indicates that UQ of 2D or 3D ERT inverse problems can be performed on a laptop or desktop PC.

58 GEOSCIENCES↗

Modeling thin layers of analytes on substrates for spectral analysis: use of solid/liquid n and k values to model reflectance spectra

Since solids are only sometimes seen en masse in a pure bulk form, and for liquids other than water almost never, a capability to model reflectance spectra from analytes deposited on various substrates would be highly advantageous. If available, the real, n ( ν ) , and imaginary, k ( ν ) , components of the complex refractive index, n n + i k , can be used to simulate infrared spectra, accounting for reflection, refraction, and absorption phenomena as a function of wavelength. We focus on using the Pacific Northwest National Laboratory (PNNL) derived n / k vectors for solid and liquid analytes deposited as thin layers on different types of substrates including conductors, such as aluminum, and inorganic dielectrics, such as glass. The model is an adaptation of the Monte Carlo ray trace modeling program, TracePro, extended through the use of its macrolanguage. The model is tested using thin films of organic liquids including silicone oil and no. 2 diesel fuel, as well as organic solids such as caffeine and acetaminophen on aluminum and glass. The predicted spectra for the solid films were compared to experimental hemispherical reflectance data measured using a Fourier transform spectrometer with an integrating sphere. The thickness of the calculated layer is a parameter for predicting the (transflectance) spectra and is obtained using the areal density measured from gravimetric methods to generate the thin-layer samples. Comparison of the calculated spectra with experimental hemispherical reflectance data shows excellent agreement, indicating promise for the use of measured n / k data to synthesize reference spectral data. In particular, accounting for the inhomogeneity of the deposits greatly improved the match with experimental data. Finally, the theoretical modeling shows that for thicker layers (ca. 20 to 100 μm) of typical organics possessing moderately strong k values, the longwave infrared features are often saturated and better spectral contrast is obtained from the overtone/combination bands in the shortwave infrared.

42 ENGINEERING↗

Bootstrapping outperforms community‐weighted approaches for estimating the shapes of phenotypic distributions

Abstract Estimating phenotypic distributions of populations and communities is central to many questions in ecology and evolution. These distributions can be characterized by their moments (mean, variance, skewness and kurtosis) or diversity metrics (e.g. functional richness). Typically, such moments and metrics are calculated using community‐weighted approaches (e.g. abundance‐weighted mean). We propose an alternative bootstrapping approach that allows flexibility in trait sampling and explicit incorporation of intraspecific variation, and show that this approach significantly improves estimation while allowing us to quantify uncertainty. We assess the performance of different approaches for estimating the moments of trait distributions across various sampling scenarios, taxa and datasets by comparing estimates derived from simulated samples with the true values calculated from full datasets. Simulations differ in sampling intensity (individuals per species), sampling biases (abundance, size), trait data source (local vs. global) and estimation method (two types of community‐weighting, two types of bootstrapping). We introduce the traitstrap R package, which contains a modular and extensible set of bootstrapping and weighted‐averaging functions that use community composition and trait data to estimate the moments of community trait distributions with their uncertainty. Importantly, the first function in the workflow, trait_fill , allows the user to specify hierarchical structures (e.g. plot within site, experiment vs. control, species within genus) to assign trait values to each taxon in each community sample. Across all taxa, simulations and metrics, bootstrapping approaches were more accurate and less biased than community‐weighted approaches. With bootstrapping, a sample size of 9 or more measurements per species per trait generally included the true mean within the 95% CI. It reduced average percent errors by 26%–74% relative to community‐weighting. Random sampling across all species outperformed both size‐ and abundance‐biased sampling. Our results suggest randomly sampling ~9 individuals per sampling unit and species, covering all species in the community and analysing the data using nonparametric bootstrapping generally enable reliable inference on trait distributions, including the central moments, of communities. By providing better estimates of community trait distributions, bootstrapping approaches can improve our ability to link traits to both the processes that generate them and their effects on ecosystems.

Maitner, Brian S.↗

Improved methods for calculating thermodynamic properties of magnetic systems using Wang-Landau density of states

The Wang-Landau method [F. Wang and D. P. Landau, Phys. Rev. E 64, 056101 (2001)] is an efficient way to calculate the density of states (DOS) for magnetic systems, and the DOS can then be used to rapidly calculate the thermodynamic properties of the system. A technique is presented that uses the DOS for a simple Hamiltonian to create a stratified sample of configurations which are then used calculate a warped DOS for more realistic Hamiltonians. This technique is validated for classical models of bcc Fe with exchange interactions of increasing range, but its real value is using the DOS for a model Hamiltonian calculated on a workstation to select the stratified set of configurations whose energies can then be calculated for a density-functional Hamiltonian. The result is an efficient first-principles calculation of thermodynamic properties such as the specific heat and magnetic susceptibility. Another technique uses the sample configurations to calculate the parameters of a model exchange interaction using a least-squares approach. The thermodynamic properties can be subsequently evaluated using traditional Monte Carlo techniques for the model exchange interaction. Finally, a technique that uses the configurations to train a neural network to estimate the configuration energy is also discussed. This technique could potentially be useful in identifying the configurations most important in calculating the warped DOS. VC2011 American Institute of Physics. [doi:10.1063/1.3565413]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A SEARCH FOR FIELD HORIZONTAL-BRANCH STARS NEAR THE SOUTH GALACTIC POLE

Searches for field horizontal-branch (FHB) stars in the halo of the Galaxy in the past have been carried out by several techniques, such as objective-prism surveys and visual or infrared photometric surveys. By choosing adequate color criteria, it is possible to improve the efficiency of identifying bona fide FHB stars among the other objects that exhibit similar characteristics, such as main-sequence A-stars, blue stragglers, subdwarfs, etc. In this work, we report the results of a spectroscopic survey carried out near the south Galactic pole intended to validate FHB stars originally selected from the HK objective-prism survey of Beers and colleagues, based on near-infrared color indices. A comparison between the stellar spectra obtained in this survey with theoretical stellar atmosphere models allows us to determine T {sub eff}, log g, and [Fe/H] for 13 stars in the sample. Stellar temperatures were calculated from measured (B - V) {sub o}, when this measurement was available (16 stars). The color index criteria adopted in this work are shown to correctly classify 30% of the sample as FHB, 25% as non-FHB (main-sequence stars and subdwarfes), whereas 40% could not be distinguished between FHB and main-sequence stars. We compare the efficacy of different color criteria in the literature intended to select FHB stars, and discuss the use of the Mg II 4481 line to estimate the metallicity.

79 ASTRONOMY AND ASTROPHYSICS↗

Factors affecting the sticking of insects on modified aircraft wings

Past studies have shown that the surface energy of a polymer coating has an important effect on the sticking of insects to the surface. However, mechanical properties of polymer coatings such as elasticity may also be important. A further study is suggested using polymer coatings of known surface energy and modulus so that a better understanding of the mechanism of the sticking of insects to surfaces can be achieved. As the first step for the study, surface analysis and road tests were performed using elastomers having different energies and different moduli. The number of insects sticking to each elastomer was counted and compared from sample to sample and with a control (aluminum). An average height moment was also calculated and comparisons made between samples.

Yi, O.↗

EPRI Software for Estimating Decommissioning Waste Volumes - 16046

EPRI has adapted computer software that can estimate the volume and activity content of waste resulting from the dismantlement of nuclear facilities. This software, designated as Automatic Estimation of the Radiological Inventory or AERI, was originally developed by Iberdrola for use by ENRESA in Spain. The software estimates the radiological inventory for all the components and civil structures of the plant or other facility that are included in the physical inventory. The radiological inventory shows the internal and external surface contamination, as well as the volumetric contamination. The processes of the software are able to estimate both the specific activity levels (in Bq/g or pCi/g) for each radionuclide and the surface activity (Bq/cm{sup 2} or dpm/100 cm{sup 2}) for components and civil structures located in the radiological areas. AERI allows the user to extrapolate, through a statistical approach, the contamination levels obtained by sampling data in specific components and civil structures to the entire facility. The main benefits and values obtained with AERI are the following: - The radiological inventory of the plant can be obtained from a limited set of radiological sampling data. Using the mathematical models allows for the optimization of the number of sampling and analysis that needs to be done. The uncertainties of the calculations are reduced with more data. The user must balance the level of uncertainty of the calculations and the number of sample data they will use. - The automatic management of radiological data in short computing times allows for the execution of several scenarios in a reasonable time. Therefore, different radioactive waste and decommissioning hypotheses can be tested. For example, inventory and data can be split into two different set. One of them can be used for obtaining radiological inventory for early dismantling (3 years, as example) and the second one for deferred dismantling (25 years.) - The software supports the planning and implementation of decommissioning strategies for nuclear plants. For instance, several decontamination factors can be evaluated, assuming different level for decontamination of materials, and results for materials from several streams and use of different container types may be included in each evaluation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

55Fe effect on enhancing ferritic steel He/dpa ratio in fission reactor irradiations to simulate fusion conditions

How to increase the ferritic steel He(appm)/dpa ratio in a fission reactor neutron spectrum is an important question for fusion reactor material testing. An early experiment showed that the accelerated He(appm)/dpa ratio of about 2.3 was achieved for 96% enriched 54Fe in iron with 458.2 effective full power days (EFPD) irradiation in the High Flux Isotope Reactor (HFIR), ORNL. Greenwood suggested that the transmutation produced 55Fe has a thermal neutron helium production cross section which may have an effect on this result. In the current work, the ferritic steel He(appm)/dpa ratio is studied in the neutron spectrum of HFIR with 55Fe thermal neutron helium production taken into account. The available ENDF-b format 55Fe incident neutron cross section file from TENDL, Netherlands, is first input into the calculation model. A benchmark calculation for the same sample as used in the aforementioned experiment was used to adjust and evaluate the TENDL 55Fe (n, a) cross section values. The analysis shows a decrease of a factor of 6700 for the TENDL 55Fe (n, a) cross section in the intermediate and low energy regions is required in order to fit the experimental results. The best fit to the cross section value at thermal neutron energy is about 27 mb. With the adjusted 55Fe (n, a) cross sections, calculation show that the 54Fe and 55Fe isotopes can be enriched by the isotopic tailoring technique in a ferritic steel sample irradiated in HFIR to significantly enhance the helium production rate. The results show that a 70% enriched 54Fe and 30% enriched 55Fe ferritic steel sample would produce a He(appm)/dpa ratio of about 13 initially in the HFIR peripheral target position (PTP). After one year irradiation, the ratio decreases to about 10. This new calculation can be used to guide future isotopic tailoring experiments designed to increase the He(appm)/dpa ratio in fission reactors. A benchmark experiment is suggested to be performed to evaluate the 55Fe (n, a) cross section at thermal energy.

55Fe(n,helium) reaction, He(appm)/dpa ratio, isoto↗

Temperature dependent DC electrical conductivity studies of ZnO nanoparticle thick films prepared by simple solution combustion method

ZnO nanoparticles of different size were prepared by varying the molar ratio of glycine and zinc nitrate hexahydrate as fuel and oxidizer (F/O = 0.8, 1.11, 1.7) by simple solution combustion method. Powder samples were characterized by UV-Visible spectrophotometer, X-ray diffractometer, Scanning electron microscope (SEM). DC electrical conductivity measurements at room temperature and in the temperature range of 313-673K were carried out for the prepared thick films and it was found to increase with increase of temperature which confirms the semiconducting nature of the samples. Activation energies were calculated and it was found that, F/O molar ratio 1.7 has low E{sub AL} (Low temperature activation energy) and high E{sub AH} (High temperature activation energy) compared to other samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Numerical analysis of radiation dynamics in a combined hohlraum in the X-ray opacity experiments on the 'Iskra-5' laser facility

We report the results of numerical analysis of radiation dynamics (laser absorption and X-ray generation) by using SNDLIRA code in a combined box used in the X-ray opacity measurements on the 'Iskra-5' facility (laser radiation wavelength, λ = 0.66 μm; laser pulse duration, τ{sub 0.5} ≈ 0.6 ns; and energy, 900 J). Combined boxes used in these experiments comprised three sections: two illuminators delivering laser radiation and a central diagnostic section with a test sample. We have proposed a scheme for step-by-step calculation of the heating dynamics of the sample under study in a three-section hohlraum. Two designs of a combined box, which differ in the ways the laser radiation is injected, are discussed. It is shown that the axial injection of the beams results in intense secondary laser irradiation of the illuminator edge which leads to its partial disruption and penetration of laser radiation into the central diagnostic section. In this case the sample under study is exposed to additional uncontrolled action of scattered laser radiation. Such an undesirable action may be avoided by using the lateral injection of the beams through four holes on the lateral side of the illuminators. For the latter case we have calculated the heating dynamics for the sample and found an optimal time delay for an X-ray probe pulse. (interaction of laser radiation with matter. laser plasma)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Variance Estimation in Monte Carlo Eigenvalue Simulations Using Spectral Analysis Method

The Monte Carlo (MC) method is the 'gold standard' for performing nuclear reactor calculations and criticality safety analyses because of its ability to handle complex geometries and physics. Reactor and criticality safety analyses require solving eigenvalue problems in complex nuclear systems. Once a stationary fission source distribution is obtained in MC simulations, the sample mean of many stationary cycles is calculated. The MC simulation sample mean is typically referred to as a tally. Variance, or standard deviation, of the sample mean/tally is needed to indicate the level of statistical uncertainty in the simulation and to understand the convergence of the sample mean. Current MC codes typically use sample variance to estimate the statistical uncertainty of the simulation and assume that the MC stationary cycles are independent. However, it is known that cycles are correlated, and estimators of the variance that ignore these correlations systematically underestimate the variance. In this paper, we propose a novel method in the Fourier frequency domain to estimate the variance of the sample mean in MC eigenvalue calculations. Results indicate that the proposed estimator can be unbiased compared to the real variance. The proposed estimator requires minimal additional computing effort.

42 ENGINEERING↗

Adaptive Data-Driven Deep-Learning Surrogate Model for Frontal Polymerization in Dicyclopentadiene

Frontal polymerization (FP) is a self-sustaining curing process that enables rapid and energy-efficient manufacturing of thermoset polymers and composites. Computational methods conventionally used to simulate the FP process are time-consuming, and repeating simulations are required for sensitivity analysis, uncertainty quantification, or optimization of the manufacturing process. Here, in this work, we develop an adaptive surrogate deep-learning model for FP of dicyclopentadiene (DCPD), which predicts the evolution of temperature and degree of cure orders of magnitude faster than the finite-element method (FEM). The adaptive algorithm provides a strategy to select training samples efficiently and save computational costs by reducing the redundancy of FEM-based training samples. The adaptive algorithm calculates the residual error of the FP governing equations using automatic differentiation of the deep neural network. A probability density function expressed in terms of the residual error is used to select training samples from the Sobol sequence space. The temperature and degree of cure evolution of each training sample are obtained by a 2D FEM simulation. The adaptive method is more efficient and has a better prediction accuracy than the random sampling method. With the well-trained surrogate neural network, the FP characteristics (front speed, shape, and temperature) can be extracted quickly from the predicted temperature and degree-of-cure fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Implementation and Comparison of Different Algorithms for on the fly Doppler Broadening in RMC Code

Accurate cross sections are of great importance to Monte Carlo particle transport calculation codes which use pointwise cross sections. It is well known that cross sections have much dependence on temperature on account of Doppler effect which is particularly vital for resonance absorption cross sections. In general, pre-prepared continuous-energy libraries are used in Monte Carlo codes, which is feasible in many applications. However, in multi-physics calculations where neutronics and thermal hydraulics are coupled, cross sections at a fine interval of temperatures are desired, which brings a great challenge to computer memory. Consequently, different methods about on the fly Doppler broadening for cross sections are proposed, which can generate cross sections at the specific temperature points during neutron simulations. These methods can be roughly classified into two categories: one is to calculate the required cross sections by different algorithms, such as interpolation using a high order function expansion, multipole representation, and different integration algorithms based on Doppler broadening equation. The other, for instance, target motion sampling (TMS), does not calculate the Doppler broadening cross sections but takes into account Doppler effect by rejection technique. In this paper, several on the fly Doppler broadening algorithms based on Doppler broadening equation are implemented in the Reactor Monte Carlo code RMC, and then the accuracy and efficiency are discussed and compared. In this paper, several algorithms for on the fly Doppler broadening based on Doppler broadening equation have been implemented in RMC and the focus falls on the comparison of the Gauss Legendre quadrature and Gauss Hermite quadrature. Gauss Legendre quadrature is more accurate than Gauss Hermite quadrature but also more time consuming. Base temperature has a significant impact on Gauss Hermite quadrature while increasing base temperature to room temperature (300 K) can give satisfactory results. In addition, the proportion of overhead of Doppler broadening treatment in total computational time tends to decrease with an increase number of nuclides in fuel. For depletion calculation, both algorithms are in good agreement with reference and the relative errors of K{sub inf} are within 5 times of standard deviation. As for total computational time, the ratio between Gauss Legendre quadrature or Gauss Hermite quadrature and reference decreases and reaches 9.6 or 3.4 at last, respectively. Four important isotopes are chosen to compare the atom density and all relative errors are within 0.25%. After comparisons of different algorithms and different base temperatures, it can be found that Gauss Hermite quadrature broadening from 300 K can perform on the fly cross section Doppler broadening with least total computational time and acceptable precision. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗