Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Refractory material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Syntheses and characterization of two oxoborates, (Pb{sub 3}O){sub 2}(BO{sub 3}){sub 2}MO{sub 4} (M=Cr, Mo)

Two oxoborates, (Pb{sub 3}O){sub 2}(BO{sub 3}){sub 2}MO{sub 4} (M=Cr, Mo), have been prepared by solid-state reactions below 700 deg. C. Single-crystal XRD analyses showed that the Cr compound crystallizes in the orthorhombic group Pnma with a=6.4160(13) A, b=11.635(2) A, c=18.164(4) A, Z=4 and the Mo analog in the group Cmcm with a=18.446(4) A, b=6.3557(13) A, c=11.657(2) A, Z=4. Both compounds are characterized by one-dimensional {sub i}nfinity{sup 1}[Pb{sub 3}O]{sup 4+} chains formed by corner-sharing OPb{sub 4} tetrahedra. BO{sub 3} and CrO{sub 4} (MoO{sub 4}) groups are located around the chains to hold them together via Pb-O bonds. The IR spectra further confirmed the presence of BO{sub 3} groups in both structures and UV-vis diffuse reflectance spectra showed band gaps of about 1.8 and 2.9 eV for the Cr and Mo compounds, respectively. Band structure calculations indicated that (Pb{sub 3}O){sub 2}(BO{sub 3}){sub 2}MoO{sub 4} is a direct semiconductor with the calculated energy gap of about 2.4 eV. - Graphical abstract: (Pb{sub 3}O){sub 2}(BO{sub 3}){sub 2}MO{sub 4} (M=Cr, Mo) are characterized by 1D {sub i}nfinity{sup 1}[Pb{sub 3}O]{sup 4+} chains formed by corner-sharing OPb{sub 4} tetrahedra. BO{sub 3} and CrO{sub 4} (MoO{sub 4}) groups are located around the chains to hold them together via Pb-O bonds.

36 MATERIALS SCIENCE↗

The effect of nanocrystallite size in monoclinic HfO{sub 2} films on lattice expansion and near-edge optical absorption

Nanocrystalline monoclinic HfO{sub 2} films were sputter deposited on fused silica substrates, air annealed at 573 to 1273 K to affect crystallite growth, and analyzed by x-ray diffraction and spectrophotometry. Lattice expansion occurs with diminishing crystallite size. O 2p->Hf 5d interband absorption dominates the optical edge at energy E>=6.24 eV, with an optical band gap, E{sub o}=5.48+-0.023, which is independent of crystallite size. However, the strength of a localized resonant band, with onset at 5.65 eV and maximum at 5.94 eV, is affected by crystallite size. Its polaronic origin in a perfect HfO{sub 2} lattice is discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Visible-light-driven photocatalysts: (La/Bi + N)-codoped NaNbO{sub 3} by first principles

To improve the photocatalytic activity of NaNbO{sub 3} for water splitting, the bandgap and the band edges of NaNbO{sub 3} should be tailored to match the visible part of the solar spectrum and hydrogen and oxygen redox potentials. By analyzing the band structures of La/Bi-doped and (La/Bi + N)-codoped NaNbO{sub 3}, we found that the pseudointermediate band (PIB) was formed in the bandgap in all the doped systems because of the orbital splitting of the Nb 4d induced by the dramatically enlarged O-Nb-O angles. The PIB could make the wide bandgap semiconductors absorb visible-light photons as long as it was degenerate or partially degenerate. Considering that the appropriate band edges and absorption properties, we believe that (La/Bi + N)-codoped NaNbO{sub 3} materials are promising photocatalysts for hydrogen production through water splitting under visible-light irradiation without other modifications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Opacity of tungsten-seeded hydrogen to 2500 K and 115 atmospheres.

Experimental investigation and measurement of the radiant heat attenuation of an aerosol which may serve as a gas core nuclear-rocket propellant. The experiment uses a tungsten-hydrogen aerosol heated to temperatures as high as 2500 K under pressures up to 115 atmospheres. The hydrogen aerosol is produced by dispersion of submicron-sized particles of tungsten in hydrogen gas. A narrow beam of broad spectrum (visible and ultraviolet) light is passed through it with the attenuation being measured as a function of wavelength. Other aerosol characteristics examined include the nature and extent of chemical reactions between the seed material and the hydrogen and the degree of dispersion of the seed material obtained before and after heating. Chemical equilibrium calculations and vapor pressure data for the refractory metals indicate that tungsten is a prime candidate for the seed material in the gas core nuclear rocket.

Williams, J. R.↗

DEVELOPMENT AND APPLICATION OF IMPROVED SHOTCTRETE REFRACTORY FOR ALUMINUM ROTARY FURNACE APPLICATIONS

Oak Ridge National Laboratory, in collaboration with refractory manufacturer Minteq International, Inc., academic partner Missouri University of Science and Technology and refractory end users have developed novel refractory systems and techniques to reduce energy consumption of refractory lined vessels. The objective of this U.S. DOE funded project was to address the need for innovative refractory compositions by developing novel gunnable refractory compositions for use in high temperature and high alkali environments. Developed materials utilized new aggregate materials, bond systems, protective coatings, and phase formation techniques. Under this project, materials were developed specifically for aluminum rotary dross furnace applications and a light-weight back-up refractory system was also developed to improve the thermal efficiency of the installed lining system. This paper discusses the systematic development of these materials, laboratory testing and evaluation of these materials, and the performance of several industrial trials performed using these newly developed materials. The success of the industrial trials will be highlighted and future areas of application of these materials discussed.

Hemrick, James Gordon↗

Methodology for Life Testing of Refractory Metal/Sodium Heat Pipes

The focus of this work was to establish an approach to generate carefully controlled data that can conclusively establish heat pipe operating life with material-fluid combinations capable of extended operation. To accomplish this goal acceleration is required to compress 10 years of operational life into 3 years of laboratory testing through a combination of increased temperature and mass fluence. Specific test series have been identi3ed, based on American Society for Testing and Materials (ASTM) specifications, to investigate long term corrosion rates. The refractory metal selected for demonstration purposes is a Molybdenum-44.5%Rhenium alloy formed by powder metallurgy. The heat pipe makes use of an annular crescent wick design formed by hot isostatic pressing of Molybdenum-Rhenium wire mesh. The heat pipes are filled using vacuum distillation and purity sampling is considered. Testing of these units is round-the-clock with 6-month destructive and non-destructive inspection intervals to identify the onset and level of corrosion. Non-contact techniques are employed for providing power to the evaporator (radio frequency induction heating at I to 5 kW per unit) and calorimetry at the condenser (static gas gap coupled water cooled calorimeter). The planned operating temperature range would extend from 1123 to 1323 K. Accomplishments prior to project cancellation included successful demonstration of the heat pipe wick fabrication technique, establishment of all engineering designs, baselined operational test requirements and procurement/assembly of supporting test hardware systems.

Martin, James J.↗

Electronic density of states as the descriptor of elastic bond strength, ductility, and local lattice distortion in BCC refractory alloys

Although electronic density of states (DOS) is fundamental to materials properties, its general relationship to mechanical properties of alloys is not well established. In this paper, using density functional theory (DFT) calculations, we show that the electronic occupancy at the Fermi level, N(E f ), obtained from DOS is a key descriptor of alloy strength and ductility. Our comprehensive analysis of numerous body centered cubic (BCC) refractory high entropy alloys (RHEAs) shows an overwhelming correlation that low N(E f ) indicates strong bonds that have high stiffness resulting in high elastic constants. High bond stiffness indicates presence of covalent nature of bonds that are directional in nature resulting in resistance to deformation leading to high bulk (B) and shear (G) moduli. Consequently, N(E f ) provides a direct correlation to the tendency of alloy ductility evidenced in the Pugh ratio (G/B). As stiffer bonds result in lower local lattice distortion (LLD), N(E f ) are LLD are also found to be corelated which opens up a correlation to solid solution strengthening and yield strength. Thus, this work unveils fundamental correlations between N(E f ) and (1) elastic bond strength, (2) ductility, and (3) LLD. These correlations open opportunities for the design of high strength high ductile RHEAs.

36 MATERIALS SCIENCE↗

Corrosion Behavior Characterization of Tantalum in Flowing LBE [Slides]

Tantalum is a refractory metal, it has low coefficient thermal expansion and high creep resistance. Its BCC structure makes Ta less prone to radiation damage. It is 2nd most ductile among refractories. Its oxide (Ta 2 O 5 ) layer is thin and stable at high temperatures and low oxygen concentrations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Downscaling of Non-Van der Waals Semimetallic W 5 N 6 with Resistivity Preservation

The bulk phase of transition metal nitrides (TMNs) has long been a subject of extensive investigation due to their utility as coating materials, electrocatalysts, and diffusion barriers, attributed to their high conductivity and refractory properties. Downscaling TMNs into two-dimensional (2D) forms would provide valuable members to the existing 2D materials repertoire, with potential enhancements across various applications. Moreover, calculations have anticipated the emergence of uncommon physical phenomena in TMNs at the 2D limit. Here, in this study, we use the atomic substitution approach to synthesize 2D W 5 N 6 with tunable thicknesses from tens of nanometers down to 2.9 nm. The obtained flakes exhibit high crystallinity and smooth surfaces. Electrical measurements on 15 samples show an average electrical conductivity of 161.1 S/cm, which persists while thickness decreases from 45.6 to 2.9 nm. The observed weak gate-tuning effect suggests the semimetallic nature of the synthesized 2D W 5 N 6 . Further investigation of the conversion mechanism elucidates the crucial role of chalcogen vacancies in the precursor for initiating the reaction and strain in propagating the conversion. Our work introduces a desired semimetallic crystal to the 2D material library with mechanistic insights for future design of the synthesis.

2D electronics↗

A Comparative Study on AC Conductivity and Dielectric Behavior of Multiwalled Carbon Nanotubes and Polyaniline Coated Multiwalled Carbon Nanotubes Filled High Density Polyethylene-Carbon Black Nanocomposites

This paper presents an experimental investigation on AC conductivity and dielectric behavior of carbon black reinforced high density polyethylene (HDPE-CB) and HDPE-CB filled with multiwalled carbon nanotubes (MWNTs-CB-HDPE) and Polyaniline (PAni) coated MWNTs-CB-HDPE nanocomposites. The electrical properties such as dielectric constant ({epsilon}'), dissipation factor (tan {delta}) and AC conductivity ({sigma}{sub ac}) of nanocomposites have been measured with reference to the weight fraction (0.5 and 1 wt% MWNTs), frequency (75 KHz-30 MHz), temperature (25-90 deg. C) and sea water ageing. The experimental results showed that the increased AC conductivity and dielectric constant of the nanocomposites were influenced by PAni coated MWNTs in HDPE-CB nanocomposites. The value of dielectric constant and tan {delta} decreased with increasing frequency. Further more, above 5 MHz the AC conductivity increases drastically whereas significant effect on tan {delta} was observed in less than 1 MHz.

36 MATERIALS SCIENCE↗

Development and characterization of high temperature stable Ta-W-Si-C amorphous metal gates

Threshold voltage variability ({sigma}{sub Vth}) due to the polycrystalline nature of current metal gates has been identified as a problem in future generations of complementary metal oxide semiconductor (CMOS) devices. Amorphous metal Ta{sub 40}W{sub 40}Si{sub 10}C{sub 10} gates are introduced in this work as a remedy. It was found that Ta-W-Si-C films remain amorphous at temperatures as high as 1120 deg. C, have n-type work functions, and are stable on HfO{sub 2}. This alloy is a promising gate-first compatible material that has the potential to significantly reduce {sigma}{sub Vth}.

36 MATERIALS SCIENCE↗

X-Ray Diffraction Line Broadening in Shock Modified Pyrite [Book Chapter]

Powder compacts of a commercially-available pyrite, FeS 2 , have been subjected to controlled, quantitative high pressure shock loading at peak pressures from 7.5-22 GPa. The profiles of the x-ray diffraction lines have been examined to determine the reduction of the crystallite (domain) size and the introduction of residual microstrain due to defects and dislocations resulting from the transmission and interaction of the shockwave. Pyrite experience a surprisingly smaller profile broadening than observed for all other materials under similar shock conditions, suggesting a much more refractory character. Such small changes are consistent with low defect densities and with the relative low reaction activity (oxidation of sulfide to sulfate by humid air) observed on this material in the complementary studies.

36 MATERIALS SCIENCE↗

Reduced-temperature processing and consolidation of ultra-refractory Ta4HfC5

TaC, HfC, and WC powders were subjected to high-energy milling and hot pressing to produce Ta4HfC5, a composite of Ta(4)HfC5 + 30 vol.% WC, and a composite of Ta4HfC5 + 50 vol.% WC. Sub-micron powders were examined after four different milling intervals prior to hot pressing. XRD was used to verify proper phase formation. SEM, relative density, and hardness measurements were used to examine the resulting phases. Hot pressed compacts of Ta4HfC5 showed densification as high as 98.6% along with Vickers hardness values of 21.4 GPa. Similarly, Ta4HfC5 + 30 vol.% WC exhibited 99% densification with a Vickers hardness of 22.5 GPa. These levels of densification were achieved at 1500 degrees C, which is lower than any previously reported sintering temperature for Ta4HfC5. Microhardness values measured in this study were higher than those previously reported for Ta4HfC5. The WC additions to Ta4HfC5 were found to improve densification and increase microhardness. (C) 2013 Elsevier Ltd. All rights reserved.

36 MATERIALS SCIENCE↗

Fabrication and Testing of Two Passively Actuated Creep-Fatigue Surveillance Test Articles

This report describes the fabrication, testing, and analysis of two families of passively-actuated creep-fatigue test articles. These test articles induce cyclic mechanical load in a test section actuated solely through a mismatch in the thermal expansion coefficient of two materials and driven by a change in the specimen temperature. Test articles of this type could provide material degradation data for a materials surveillance program in future operating molten salt reactors, where variations in the reactor temperature caused by normal or upset cycles would provide the temperature change in the sample. The purpose of the current experimental campaign is to demonstrate the feasibility of fabricating realistically-sized test articles, test the articles under repeated thermal cycling to assess their robustness, particularly the reliability of the bimetallic welds, and collect strain data from instrumented samples to validate the methods used to size the test articles to match key features of the mechanical response of operating reactor components. The thermal cycling tests are ongoing but the test data to date suggests the current test article design is viable, robust, and can be successfully designed to match a target mechanical response. Finally, the report describes preliminary work on welding refractory alloys to 316H stainless steel. Replacing the test article driver material, currently Alloy 617, with a refractory would increase the coefficient of thermal expansion mismatch and support further miniaturization of the test articles.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

External Beam Radiotherapy for Clinically Localized Hormone-Refractory Prostate Cancer: Clinical Significance of Nadir Prostate-Specific Antigen Value Within 12 Months

Purpose: To analyze retrospectively the results of external beam radiotherapy for clinically localized hormone-refractory prostate cancer and investigate the clinical significance of nadir prostate-specific antigen (PSA) value within 12 months (nPSA12) as an early estimate of clinical outcomes after radiotherapy. Methods and Materials: Eighty-four patients with localized hormone-refractory prostate cancer treated with external beam radiotherapy were retrospectively reviewed. The total radiation doses ranged from 30 to 76 Gy (median, 66 Gy), and the median follow-up period for all 84 patients was 26.9 months (range, 2.7-77.3 months). Results: The 3-year actuarial overall survival, progression-free survival (PFS), and local control rates in all 84 patients after radiotherapy were 67%, 61%, and 93%, respectively. Although distant metastases and/or regional lymph node metastases developed in 34 patients (40%) after radiotherapy, local progression was observed in only 5 patients (6%). Of all 84 patients, the median nPSA12 in patients with clinical failure and in patients without clinical failure was 3.1 ng/mL and 0.5 ng/mL, respectively. When dividing patients according to low (<0.5 ng/mL) and high ({>=}0.5 ng/mL) nPSA12 levels, the 3-year PFS rate in patients with low nPSA12 and in those with high nPSA12 was 96% and 44%, respectively (p < 0.0001). In univariate analysis, nPSA12 and pretreatment PSA value had a significant impact on PFS, and in multivariate analysis nPSA12 alone was an independent prognostic factor for PFS after radiotherapy. Conclusions: External beam radiotherapy had an excellent local control rate for clinically localized hormone-refractory prostate cancer, and nPSA12 was predictive of clinical outcomes after radiotherapy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

External Beam Radiotherapy Followed by {sup 90}Y Ibritumomab Tiuxetan in Relapsed or Refractory Bulky Follicular Lymphoma

Purpose: We combined external beam radiotherapy (EBRT) with yttrium-90 ibritumomab tiuxetan ({sup 90}Y-IT) in an attempt to improve therapeutic response in patients with relapsed or refractory bulky follicular lymphoma (RRBFL). Methods and Materials: Between February 2006 and September 2007, 11 patients with RRBFL were treated with EBRT followed by {sup 90}Y-IT. Bulky disease (BD) was defined as >5 cm. EBRT was delivered to BD as 2,400 cGy in eight fractions using computed tomography (CT)-based planning. BD was contoured as the gross tumor volume. A planning margin of 1 to 2 cm was added depending on anatomical location. After recovery of complete blood counts (CBC), {sup 90}Y-IT was administered at a dose of 0.3 or 0.4 mCi/kg depending on platelet counts. Hematologic toxicity was monitored through weekly CBC. Response was measured by positron emission tomography/CT or CT 3-4 months after {sup 90}Y-IT. Results: Only 2 patients required prolonged breaks between EBRT and {sup 90}Y-IT. The median time after {sup 90}Y-IT for platelets to recover to >100,000/ml was 55 days (range, 41-128 days). Platelet counts for 1 patient, who had received 4 previous chemotherapy regimens, never reached 100,000/ml. The complete and overall responses to combined therapy as measured 3-4 months after {sup 90}Y-IT were 64%. No patients relapsed within the EBRT field. With a median follow-up of 36.1 months, 6 patients have relapsed, 2 of whom have died. Median progression-free survival was 17.5 months. Conclusions: In contrast to prior failure analysis data for RRBFL patients treated with {sup 90}Y-IT alone, a brief course of EBRT prevented relapse in sites of BD. EBRT used to pretreat bulky sites may improve clinical outcomes and potentially extend survival when combined with {sup 90}Y-IT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Investigation of magnetic and electrical transport properties of YMB 4 (M = Cr, Fe, and Co) compounds

We have studied the structural, magnetic, and electrical transport properties of the YMB 4 series of compounds (M= Cr, Fe, and Co). These materials exhibit high stability and possess notable refractory and thermoelectric properties. Furthermore, recent theoretical predictions suggest that some of these compounds may display quantum magnetism and dimer formation among the magnetic ions. We have synthesized almost single phase YMB 4 compounds in the orthorhombic crystal structure (space group Pbam) using arc-melting and annealing. The Rietveld analysis of the room-temperature X-ray diffraction patterns reveals a clear change in the lattice parameter c, which correlates with the atomic radii of Cr, Fe, and Co. The temperature variation of resistivity measured between 2 K and 300 K reveals a metallic electron transport in all three YMB 4 compounds. However, no abrupt change in resistivity due to structural or magnetic phase transitions is observed. Additionally, a weak positive magnetoresistance of 1%–2% has been measured at 2.5 K, the contribution from the metallic impurity cannot be ruled out. The carrier concentration, on the order of 10 21 cm −3 , has been determined using conventional Hall measurements. The thermomagnetic curves recorded between 2 K and 350 K reveal the non-magnetic behavior of all these compounds. However, a small magnetic moment from paramagnetic/ferromagnetic impurity phases is detected at low temperatures. Above room temperature, no magnetic transition associated with the breaking of a dimer is observed.

borides↗