Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RF SYSTEMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

The Superconducting RF Photoinjector at ELBE--First Operational Experience

An RF photoinjector with a superconducting cavity (SRF gun) for installation at the Radiation Source ELBE was developed within a collaboration of BESSY, DESY, FZD, and MBI. This new and promising injector type allows CW operation and has the potential for the production of high-brightness electron beams. The gun cryostat, the electron diagnostic beamline, and the driver laser with optical beamline were installed. In November 2007 the first beam was produced. Results of the beam parameter measurements with Cs{sub 2}Te photo cathodes are presented.

43 PARTICLE ACCELERATORS↗

Rossendorf SRF-Gun Cavity Characteristics

At the Forschungszentrum Dresden-Rossendorf the development and the setup of the 2nd superconducting radio frequency photo electron injector (SRF-Photo-Gun) is finished. This new injector is placed next to the existing thermionic gun of the superconducting linear accelerator ELBE. A connection between the accelerator and the SRF-Gun will provide improved beam parameters for the users at the second half of 2009. At the moment the commissioning is fully under way. We will report on important results concerning cavity commissioning like measurements of: Q vs. E, microphonics, Lorentz detuning, tuner parameters, pressure sensibility and in-situ fundamental mode field distribution calculated from measured pass band.

43 PARTICLE ACCELERATORS↗

The Polarized SRF Gun Experiment

An experiment is under way to prove the feasibility of a super-conducting RF gun for the production of polarized electrons. We report on the progress of the experiment and on simulations predicting the possibility of success.

43 PARTICLE ACCELERATORS↗

Experimental Test of New Technique to Overcome Spin Depolarizing Resonances

We recently tested a new spin resonance crossing technique, Kondratenko Crossing (KC) by sweeping an rf solenoid's frequency through an rf-induced spin resonance with both the KC an traditional Fast Crossing (FC) patterns. Using both rf bunched and unbunched 1.85 GeV/c polarized deuterons stored in COSY, we varied the parameters of both crossing patterns. Compared to FC with the same crossing speed, KC reduced the depolarization by measured factors of 4.7+-0.3 and 19+-{sub 5}{sup 12} for unbunched and bunched beams, respectively. This clearly showed the large potential benefit of Kondratenko Crossing over Fast Crossing.

43 PARTICLE ACCELERATORS↗

Analysis of Data for Stored Polarized Beams Using a Spin Flipper

We employ the ASPIRRIN program to fit recent measurements of spin flip resonance widths, made using a radial field rf dipole spin flipper, for stored beams of polarized protons and deuterons at the COSY storage ring. We obtain a good fit to the data.

43 PARTICLE ACCELERATORS↗

Driven Spin Coherent Precession at RHIC

In a circular accelerator, exciting a coherent spin precession can be used to measure the spin precession tune, which is critical for understanding spin dynamics of the polarized beam. This can be achieved by driving the polarized beam with an rf dipole at an oscillating frequency f{sub res} in the vicinity of the beam spin precession frequency f{sub s}, namely, f{sub res}approx =f{sub s}. The driven coherent spin precession was measured with the RHIC Coulomb Nuclear Interference polarimeter using a carbon target. This paper presents the spin coherent precession observed with polarized proton beam at the BNL RHIC. Both experimental data and its application for spin tune measurement are discussed.

43 PARTICLE ACCELERATORS↗

Three-dimensional simulations of ion dynamics in an Electron Cyclotron Resonance Ion Source

We present a three-dimensional simulation of the ion dynamics in an electron cyclotron resonance ion source. Ion trajectories in the min-B field of the source are calculated taking ion-ion and electron-ion collisions into account. The electrons are not tracked but considered as a neutralizing background with a Maxwell-Boltzmann velocity distribution. Some applications of the code are discussed, e.g., the calculated charge-state and phase-space distributions of extracted ion beams and the ionization dynamics in the plasma.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The effect of rf pulse pattern on bremsstrahlung and ion current time evolution of an ECRIS

Time-resolved helium ion production and bremsstrahlung emission from JYFL 14 GHz ECRIS is presented with different radio frequency pulse lengths. rf on times are varied from 5 to 50 ms and rf off times from 10 to 1000 ms between different measurement sets. It is observed that the plasma breakdown occurs a few milliseconds after launching the rf power into the plasma chamber, and in the beginning of the rf pulses a preglow transient is seen. During this transient the ion beam currents are increased by several factors compared to a steady state situation. By adjusting the rf pulse separation the maximum ion beam currents can be maintained during the so-called preglow regime while the amount of bremsstrahlung radiation is significantly decreased.

43 PARTICLE ACCELERATORS↗

Measurement of radial and axial high energy x-ray spectra in electron cyclotron resonance ion source plasmas

Radial and axial x-ray measurements of electron cyclotron resonance ion sources operating at microwave frequencies of 6.4 and 14 GHz are presented. Results indicate a greater detected photon energy in the radial direction than the axial direction for both the 6.4 GHz source and the 14 GHz source. It is also seen that the 14 GHz source produces x-rays with higher energies, when compared to the 6.4 GHz source, in both radial and axial directions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Simulation of parameter scaling in electron cyclotron resonance ion source plasmas using the GEM code

Although heating power and gas pressure are two of the two of primary experimental ''knobs'' available to users of electron cyclotron resonance ion sources, there is still no clear understanding of how they interact in order to provide optimal plasma conditions. FAR-TECH, Inc. has performed a series of simulations with its generalized electron cyclotron resonance ion source model in which the power and pressure were varied over a wide range. Analysis of the numerical data produces scaling laws that predict the plasma parameters as a function of the power and pressure. These scaling laws are in general agreement with experimental data.

43 PARTICLE ACCELERATORS↗

Nanoparticle plasma ejected directly from solid copper by localized microwaves

A plasma column ejected directly from solid copper by localized microwaves is studied. The effect stems from an induced hotspot that melts and emits ionized copper vapors as a confined fire column. Nanoparticles of {approx}20-120 nm size were revealed in the ejected column by in situ small-angle x-ray scattering. Optical spectroscopy confirmed the dominance of copper particles in the plasma column originating directly from the copper substrate. Nano- and macroparticles of copper were verified also by ex situ scanning electron microscopy. The direct conversion of solid metals to nanoparticles is demonstrated and various applications are proposed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of the resonant growth of harmonics on the electron density in capacitively coupled plasma

The growth of harmonics is known to occur under the condition of plasma series resonance (PSR). In an actual plasma process chamber, the external circuit also affects the PSR. We experimentally demonstrated the resonant growth of the third and fourth harmonics by tuning a variable capacitor attached to the electrode, and investigated the influence of the growth on the electron density. We observed significant increases in electron density as the amplitude of harmonics grows. The result clearly shows that nonlinear electron resonance heating actually takes place.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microwave to plasma coupling in electron cyclotron resonance and microwave ion sources (invited)

Coupling improvements between microwaves and plasmas are a key factor to design more powerful electron cyclotron resonance and microwave ion sources. On this purpose different activities have been undertaken by the INFN-LNS ion source team and a new approach was developed. Recent experiments confirmed the simulations, demonstrating that even in presence of a dense plasma, resonant modes are excited inside the cavity and the plasma dynamics depends on their structure. An overview of the coupling issues on microwave ion sources is also given along with a discussion on alternative coupling techniques.

43 PARTICLE ACCELERATORS↗

Sealed operation of a rf driven ion source for a compact neutron generator to be used for associated particle imaging

We present the recent development of a prototype compact neutron generator to be used in conjunction with the method of associated particle imaging for the purpose of active neutron interrogation. In this paper, the performance and device specifications of these compact generators that employ rf driven ion sources will be discussed. Initial measurements of the generator performance include a beam spot size of 1 mm in diameter and a neutron yield of 2x10{sup 5} n/s with air cooling.

43 PARTICLE ACCELERATORS↗

Experiments on Cryogenic Complex Plasma

Experiments on a cryogenic complex plasma have been performed. Preliminary experiments include production of a plasma in a liquid helium or in a cryogenic helium gas by a pulsed discharge. The extended production of a plasma has been realized in a vapor of liquid helium or in a cryogenic helium gas by rf discharge. The charge of dust particles injected in such a plasma has been studied in detail.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Radio frequency-driven proton source with a back-streaming electron dump

This article describes an rf ion source with a back-streaming electron dump. A quartz tube, brazed to a metal plug at one end, is fused in the center of a flat quartz plate. rf power (at 13.6 MHz) is coupled to generate hydrogen plasma using a planar external antenna bonded to the window. Bonding the water-cooled rf antenna to the quartz window significantly lowers its temperature. The water-cooled metal plug serves as the back-streaming electron dump. At 1800 W, the current density of extracted hydrogen ions reaches approximately 125 mA/cm{sup 2}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pulse modulated microwave operation on large bore electron cyclotron resonance ion source with cylindrically comb-shaped magnetic fields configuration

In order to enhance efficiency of an electron cyclotron resonance (ECR) plasma for broad and dense ion beam source under the low pressure, the magnetic field configuration is constructed by a pair of comb-shaped magnet which has opposite polarity each other, and which cylindrically surrounds the plasma chamber. By using the pulse microwave mode operation, we aim at generation of plasma with parameters that cannot be achieved at the continuous microwave (cw) mode. The maximum beam current is obtained in the experimental condition of the pulse width 100-200 {mu}s at the duty ratio 40%-50%. According to probe measurements of the ECR plasma, it is found the electron density in the pulse mode is larger than that in the cw mode, while the electron temperatures in the pulse mode were lower than that in the cw mode. These indirect evidences cause to enhance ion beams in the pulse mode operation, and then suggest a spread of operation windows for plasma parameters suitable to production of molecular or cluster ions.

43 PARTICLE ACCELERATORS↗

The NSCL electron beam ion trap for the reacceleration of rare isotopes coming to life: First extraction tests with a high-current electron gun

NSCL is currently constructing the ReA3 reaccelerator, which will accelerate rare isotopes obtained from gas stopping of fast-fragment beams to energies of up to 3 MeV/u for uranium and higher for lighter ions. A high-current charge breeder, based on an electron beam ion trap (EBIT), has been chosen as the first step in the acceleration process, as it has the potential to efficiently produce highly charged ions in a single charge state. These ions are fed into a compact linear accelerator consisting of a radio frequency quadrupole structure and superconducting cavities. The NSCL EBIT has been fully designed with most of the parts constructed. The design concept of the EBIT and results from initial commissioning tests of the electron gun and collector with a temporary 0.4 T magnet are presented.

43 PARTICLE ACCELERATORS↗