Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Recording and reproduction of microwave holograms using a scanning procedure and their subsequent optical processing

Intensity distributions in nonoptical wave fields can be visualized and stored on photosensitive material. In the case of microwaves, temperature effects can be utilized with the aid of liquid crystals to visualize intensity distributions. Particular advantages for the study of intensity distributions in microwave fields presents a scanning procedure in which a microcomputer is employed for the control of a probe and the storage of the measured data. The present investigation is concerned with the employment of such a scanning procedure for the recording and the reproduction of microwave holograms. The scanning procedure makes use of an approach discussed by Farhat, et al. (1973). An eight-bit microprocessor with 64 kBytes of RAM is employed together with a diskette storage system.

Hetsch, J.↗
NASA NTRS1984

Laboratory degradation of Kapton in a low energy oxygen ion beam

An atomic oxygen ion beam, accelerated from a tunable microwave resonant cavity, was used at Lewis Research Center to bombard samples of the widely used polyimide Kapton. The Kapton experienced degradation and mass loss at high rates, which may be comparable to those found in Space Shuttle operations if the activation energy supplied by the beam enabled surface reactions with the ambient oxygen. The simulation reproduced the directionality (ram-wake dependence) of the degradation, the change in optical properties of the degraded materials, and the structure seen in scanning electron micrographs of samples returned on the Shuttle Trails with a substituted argon ion beam produced no rapid degradation. Energy Dispersive X-ray Analysis (EDAX) showed significant surface composition changes in all bombarded samples. Mass loss rates and surface composition changes are discussed in terms of the possible oxidation chemistry of the interaction. Finally, the question of how the harmful degradation of materials in low Earth orbit can be minimized is addressed.

Ferguson, D. C.↗
NASA NTRS1983

MST radar transmitter control and monitor system

A generalized transmitter control and monitor card was developed using the Intel 8031 (8051 family) microprocessor. The design was generalized so that this card can be utilized for virtually any control application with only firmware changes. The block diagram appears in Figure 2. The card provides for local control using a 16 key keypad (up to 64 keys are supported). The local display is four digits of 7 segment LEDs. The display can indicate the status of all major system parameters and provide voltage readout for the analog signal inputs. The card can be populated with only the chips required for a given application. Fully populated, the card has two RS-232 serial ports for computer communications. It has a total of 48 TTL parallel lines that can define as either inputs or outputs in groups of four. A total of 32 analog inputs with a 0-5 volt range are supported. In addition, a real-time clock/calendar is available if required. A total of 16 k bytes of ROM and 16 k bytes of RAM is available for programming. This card can be the basis of virtually any monitor or control system with appropriate software.

Brosnahan, J. W.↗
NASA NTRS1984

The PDS-VAX intelligent plate scanning system of Trieste Astronomical Observatory

An intelligent subsystem for interfacing a PDS1010A digital microdensitometer to a DEC DR11W DMA 16 bit UNIBUS port in DEC VAX VMS environment was tested. The subsystem employs two MOTOROLA M68000 microprocessors with 128 KB data memory. The PDS primitives and the user defined high level scanning functions and preprocessing modules are loaded from the host computer into two 8 KB RAM memories in the microprocessors using a dedicated PDS control language. The subsystem is planned to employ a nonstandard photomultiplier electronics. Two design schemes were tested: (1) based on three amplifiers of gain 10 cascaded and multiplexed to a 12 bit AD converter, and (2) based on a single amplifier of gain 100 and two 14 bit AD converters.

Pucillo, M.↗
NASA NTRS1984

Research in the design of high-performance reconfigurable systems

An initial design for the Bit Processor (BP) referred to in prior reports as the Processing Element or PE has been completed. Eight BP's, together with their supporting random-access memory, a 64 k x 9 ROM to perform addition, routing logic, and some additional logic, constitute the components of a single stage. An initial stage design is given. Stages may be combined to perform high-speed fixed or floating point arithmetic. Stages can be configured into a range of arithmetic modules that includes bit-serial one or two-dimensional arrays; one or two dimensional arrays fixed or floating point processors; and specialized uniprocessors, such as long-word arithmetic units. One to eight BP's represent a likely initial chip level. The Stage would then correspond to a first-level pluggable module. As both this project and VLSI CAD/CAM progress, however, it is expected that the chip level would migrate upward to the stage and, perhaps, ultimately the box level. The BP RAM, consisting of two banks, holds only operands and indices. Programs are at the box (high-level function) and system level. At the system level initial effort has been concentrated on specifying the tools needed to evaluate design alternatives.

Slotnick, D. L.↗
NASA NTRS1983

The relationship between Saturn kilometric radiation and the solar wind

Voyager spacecraft radio, interplanetary plasma, and interplanetary magnetic field data are used to show that large amplitude fluctuations in the power generated by the Saturn kilometric radio emission are best correlated with solar wind ram pressure variation. In all, thirteen solar wind quantities previously found important in driving terrestrial magnetospheric substorms and other auroral processes were examined for evidence of correlations with the Saturn radio emission. The results are consistent with hydromagnetic wave or eddy diffusion processes driven by large scale solar wind pressure changes at Saturn's dayside magnetopause. Previously announced in STAR as N83-24445

Desch, M. D.↗
NASA NTRS1983

The structure and emission spectrum of a nonradiative shock wave in the Cygnus Loop

The ultraviolet spectrum of a Balmer-line filament located just outside the main body of optical filaments in the Cygnus Loop confirms the nonradiative shock wave theory for its origin. This theory is extended to include the hydrogen two-photon continuum, and the possibility of slow electron-ion equilibration in the postshock gas is considered. The shock velocity is inferred from the H-alpha profile. Comparison of model calculations with optical and ultraviolet spectra favors Coulomb equilibration behind a 170 km/s shock over models with rapid equilibration due to plasma turbulence. Elemental abundances in the preshock gas are found to be typical of diffuse interstellar clouds. The ram pressure behind the shock is higher than the pressures inferred for bright optical filaments. It is suggested that the bright optical filaments are regions of thermally unstable cooling behind shocks faster than the shock velocities inferred from their optical and ultraviolet spectra.

Raymond, J. C.↗
NASA NTRS1984

A kinky heliospheric current sheet - Cause of CDAW-6 substorms

Two magnetospheric substorms and the intensification of the second are caused by interplanetary magnetic field and ram pressure changes associated with a kinky heliospheric current sheet (KHCS). The responsible interplanetary features occur in a highly compressed region between a solar flare-associated shock wave and the cold driver gas. The possibility that the interplanetary structure is a 'magnetic cloud' is ruled out.

Tsurutani, B. T.↗
NASA NTRS1984

Experimental studies of scaling laws for plasma collection at high voltages

Current-voltage characteristics were determined for stainless steel in a laboratory with a simulated ionospheric environment of 5 x 10 to the 11th to 2.5 x 10 to the 12th electrons/cu m. Panels with areas differing by a factor of up to 100 were biased between 0 and -2300 V. Secondary emission was corrected for using experimental data. The results indicate that the current-voltage characteristics are almost linear and that for voltages above about -500 V the current scales with characteristic panel length as L exp 1.2. Comparison with some theoretical predictions is discussed. Because of orbital velocity associated ion ram effects, the results of this study must be used with caution when applied to an orbiting spacecraft.

Konradi, A.↗
NASA NTRS1984

Interactions between the orbiting Space Shuttle and the ionosphere

This paper presents an analysis of interactions between the Space Shuttle Orbiter and the ionosphere based on thermal plasma data obtained from a Spherical Retarding Potential Analyzer (SRPA) and a Langmuir Probe (LP) flown on the third Space Shuttle flight (STS-3) in March 1982. While previous work on spacecraft-plasma interactions has dealt with wake effects, the present work deals with effects that are seen in ram conditions that have not been previously discussed. One observation is a higher degree of plasma turbulence than has been reported from unmanned spacecraft measurements that manifests itself as a frequency component at 2.2 kHz in the SRPA signal. Also seen are unusually high number densities of what appear to be ions with a mass of at least 30 or 32 amu and a temperature in the range 2000-3000 K. Coincident with the enhanced molecular ion species, the temperature of the thermal electrons is seen elevated to above 5000 K. It is hypothesized that these measurements are evidence for a plasma instability resulting from the motion of the outgassing Orbiter through the ionosphere.

Siskind, D. E.↗
NASA NTRS1984

Processing of sintered alpha SiC

Processing methods of sintered alpha SiC for engine applications are developed in a cost effective manner, using a submicron sized powder blended with sintering aids (boron and carbon). The processes for forming a green powder compact, such as dry pressing, cold isostatic pressing and green machining, slip casting, aqueous extrusion, plastic extrusion, and injection molding, are described. Dry pressing is the simplest route to component fabrication, and is carried out at approximately 10,000 psi pressure, while in the cold isostatic method the pressure could go as high as 20,000 psi. Surfactants are added to control settling rates and casting characteristics in the slip casting. The aqueous extrusion process is accomplished by a hydraulic ram forcing the aqueous mixture through a die. The plastic forming processes of extrusion and injection molding offer the potential of greater diversity in shape capacity. The physical properties of sintered alpha SiC (hardness, Young's modulus, shear modulus, and thermal diffusivity) are extensively tested. Corrosion resistance test results of silicon carbide are included.

Storm, R. S.↗
NASA NTRS1985

Encoding Scheme Reduces Hardware Requirements

Shift register time-shared in proposed error-correcting code for tape-storage systems. Error-correcting code logic for blocks of 256-bit data words implemented by 14-stage-time-shared shift register, two 4,096bit RAM's and logic gates. Encoding and decoding logic implement generator polynomial that defines error-correcting code, and error correction based on algorithm also implemented by logic.

Sasnowitz, H.↗
NASA NTRS1985

Modeling "Soft" Errors in Bipolar Integrated Circuits

Mathematical models represent single-event upset in bipolar memory chips. Physics of single-event upset in integrated circuits discussed in theoretical paper. Pair of companion reports present mathematical models to predict critical charges for producing single-event upset in bipolar randomaccess memory (RAM) chips.

Zoutendyk, J.↗
NASA NTRS1982

An engine trade study for a supersonic STOVL fighter-attack aircraft, volume 1

The best main engine for an advanced STOVL aircraft flight demonstrator was studied. The STOVL aircraft uses ejectors powered by engine bypass flow together with vectored core exhaust to achieve vertical thrust capability. Bypass flow and core flow are exhausted through separate nozzles during wingborne flight. Six near term turbofan engines were examined for suitability for this aircraft concept. Fan pressure ratio, thrust split between bypass and core flow, and total thrust level were used to compare engines. One of the six candidate engines was selected for the flight demonstrator configuration. Propulsion related to this aircraft concept was studied. A preliminary candidate for the aircraft reaction control system for hover attitude control was selected. A mathematical model of transfer of bypass thrust from ejectors to aft directed nozzle during the transition to wingborne flight was developed. An equation to predict ejector secondary air flow rate and ram drag is derived. Additional topics discussed include: nozzle area control, ejector to engine inlet reingestion, bypass/core thrust split variation, and gyroscopic behavior during hover.

Beard, B. B.↗
NASA NTRS1985

A SLAM II simulation model for analyzing space station mission processing requirements

Space station mission processing is modeled via the SLAM 2 simulation language on an IBM 4381 mainframe and an IBM PC microcomputer with 620K RAM, two double-sided disk drives and an 8087 coprocessor chip. Using a time phased mission (payload) schedule and parameters associated with the mission, orbiter (space shuttle) and ground facility databases, estimates for ground facility utilization are computed. Simulation output associated with the science and applications database is used to assess alternative mission schedules.

Linton, D. G.↗
NASA NTRS1985

Study of Kapton Degradation under Simulated Shuttle Environment

Weight loss and severe degradation of the surface of Kapton that occurs in low Earth orbit is studied. Atomic oxygen, the major ambient species at low Earth altitude and incident with approximately 5 eV energy in ram conditions, is the primary suspect, but a thorough study of oxygen-Kapton interactions has not yet been carried out. A low-energy ion source is used to simulate the shuttle low Earth orbit environment. This source, together with diagnostic tools including surface analysis and mass spectroscopic capability, is being used to carry out experiments from which quantum yields may be obtained.

Eck, T. G.↗
NASA NTRS1985

A retarding ion mass spectrometer for the Dynamics Explorer-1

The Retarding Ion Mass Spectrometer (RIMS) for Dynamics Explorer-1 is an instrument designed to measure the details of the thermal plasma distribution. It combines the ion temperature determining capability of the retarding potential analyzer with the compositional capabilities of the mass spectrometer and adds multiple sensor heads to sample all directions relative to the spacecraft ram direction. This manual provides a functional description of the RIMS, the instrument calibration, and a description of the commands which can be stored in the instrument logic to control its operation.

Wright, W.↗
NASA NTRS1984

MIDAS - A microcomputer-based image display and analysis system with full Landsat frame processing capabilities

Image Display and Analysis Systems (MIDAS) developed at NASA/Ames for the analysis of Landsat MSS images is described. The MIDAS computer power and memory, graphics, resource-sharing, expansion and upgrade, environment and maintenance, and software/user-interface requirements are outlined; the implementation hardware (including 32-bit microprocessor, 512K error-correcting RAM, 70 or 140-Mbyte formatted disk drive, 512 x 512 x 24 color frame buffer, and local-area-network transceiver) and applications software (ELAS, CIE, and P-EDITOR) are characterized; and implementation problems, performance data, and costs are examined. Planned improvements in MIDAS hardware and design goals and areas of exploration for MIDAS software are discussed.

Hofman, L. B.↗