Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Selective photo-excitation of molecules enabled by stimulated Raman pre-excitation

Double resonance excitation, where the energies of vibrational and electronic molecular transitions are combined in a single, sequential excitation process, was introduced in the 1970s but has only been recently applied to microscopy due to the immense progress in Raman spectroscopy. The value of the technique is in combining the chemical selectivity of IR or Raman excitation with the much larger cross-sections of electronic transitions. Recently, it has been shown to be particularly suited for the detection and identification of chromophores at low concentrations and in the presence of spectral crosstalk. However, despite its low quantum yield per pulse sequence, we believe the technique has potential for selective photochemical transformations. There are some cases (e.g., the selective excitation of optogenetic switches) where the low yield may be overcome by repeated excitations to build up biochemically relevant concentrations. Here we show that double resonance excitation using general, non-resonant Raman pre-excitation is a viable candidate for selectively promoting molecules to chemically active energy levels. Further, the use of non-resonant Raman pre-excitation is less constraining than resonant Raman (used in previous double resonance microscopy works) since the choice of Raman pump-Stokes frequencies may be rather freely chosen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Li–Mn–O Li-rich cation disordered rock-salt cathode materials do not undergo reversible oxygen redox during cycling

An in-depth study of “Li 4 Mn 2 O 5 ”, a nanocomposite of Li 2 O and Li 4-x Mn 2 O 5 with a disordered rock salt structure (LMO), was conducted to determine the origins of the observed anomalously high charge and discharge capacity in lithium cells, which can exceed 350 mA h g -1 . Using soft and hard X-ray absorption spectroscopy (XAS), mapping of resonant inelastic X-ray scattering (mRIXS), and X-ray Raman spectroscopy (XRS), it was determined that electrochemical decomposition of Li 2 O upon charge and reduction of Mn to below 3+ during discharge is responsible for the capacities that are observed, with no evidence of contributions from reversible oxygen redox. Here, the over-reduction is exacerbated when charging limits of 4.5–4.8 V are used due to side reactions between electrolytic solution and the highly oxidized active material. These side reactions result in dissolution of Mn at room temperature and release of oxygen and other gases during initial cycles, which, in turn, cause rapid capacity fading. This is accompanied by evolution of the voltage profile upon cycling towards one that resembles that of manganese oxide spinels. The cycling behavior can be improved somewhat by reducing the upper voltage limit, although this results in a diminishment of the discharge capacities below 200 mA h g -1 . By adding various amounts of spinel LiMn 2 O 4 during synthesis, it was possible to produce LMOs with rock salt structures having significantly improved cycling behavior but still having capacities in excess of 250 mA h g -1 . An optimized modified material also exhibits better rate capability and much less gas evolution during initial cycles than the unmodified LMO. Interestingly, as-made modified materials generally exhibited lower than expected average Mn oxidation states attributable to oxygen loss during the synthesis process, as well as higher capacities than expected based on their manganese contents. The oxygen loss during processing may reduce the activity of the remaining oxygen and account for the lower reactivity of the spinel-modified material.

25 ENERGY STORAGE↗

Context Imaging Raman Spectrometer

Methods and systems for Raman spectroscopy and context imaging are disclosed. One or two lasers can be used to excite Raman scattering in a sample, while a plurality of LEDs can illuminate the sample at a different wavelength. The LED light is collected by a lenslet array in order to enable a high depth of field. Focusing of the image can be carried out at specific points of the image by processing the light collected by the lenslet array.

Lambert, James L.↗

Aqueous Zr/Hf IV ‐Oxo Cluster Speciation and Separation

Abstract Many industrial separations of chemically‐similar elements are achieved by solvent extraction, exploiting differences in speciation and solubility across aqueous‐organic interfaces. We recently identified [OM 4 (OH) 6 (SCN) 12 ] 4− (OM 4 , M=Zr/Hf IV ) tetrahedral oxoclusters as the main species in industrial processes that produce nuclear‐grade Zr and Hf from crude ore. However, isostructural/isoelectronic OM 4 ‐oxoclusters do not explain selective extraction of Hf into the organic phase. Here we have characterized heterometal Hf−Zr clusters in solution and the solid‐state yielding key information about their fundamentally different chemistry that engenders separation. Clusters prepared with both ammonium (industrial process) and tetramethylammonium counter cations revealed that 1) heterometal clusters (instead of a mixture of homometal clusters) assemble, and 2) Hf‐rich OM 4 selectively precipitates over Zr‐rich OM 4 , providing a separation process that does not require an organic extractant. Mass spectrometry, small‐angle X‐ray scattering, solution‐state 1 H nuclear magnetic resonance (NMR) spectroscopy, and solid‐state 17 O NMR evidence both mixed‐metal speciation and selective Hf‐precipitation. Raman spectroscopy suggests greater Zr‐ligand lability than Hf‐ligand lability, consistent with higher aqueous solubility of Zr‐rich clusters, enabling both extraction and precipitation‐based separation. Fundamentally, we also identify a key difference between these chemically similar elements that has enabled diversification of Zr‐polyoxocation chemistry over the last decade, while Hf‐polyoxocation chemistry lags.

Roseborough, Alexander [Department of Chemistry Or↗

First-principles study of the magneto-Raman effect in van der Waals layered magnets

Magneto-Raman spectroscopy has been used to study spin-phonon coupling in two-dimensional (2D) magnets. Raman spectra of CrI 3 show a strong dependence on the magnetic order within a layer and between the layers. Here we carry out the first systematic theoretical investigation of the magneto-Raman effect in 2D magnets by performing density functional theory calculations and developing a generalized polarizability model. Our first-principles simulations well reproduce experimental Raman spectra of CrI 3 with different magnetic states. The model reveals how the change of spin orientation in each layer is coupled to the layer’s vibration to induce or eliminate the spin-dependent anti-symmetric off-diagonal terms in the Raman tensor for altering the selection rules. We also uncover that the correlation between phonon modes and magnetic orders is a universal phenomenon, which should exist in other phonon modes and 2D magnets. Our predictive simulations and modeling are expected to guide the research in 2D magnets.

36 MATERIALS SCIENCE↗

Measurement of Raman spectra of H2O and SO4(-) in seawater

A study of applying laser Raman spectroscopy to remote sensing of the sulfate ion in sea water is in progress. The SO4 Raman spectrum has been obtained from true sea water samples in the laboratory using a CW laser Raman spectrometric system. Radiometric calculations indicate the feasibility of obtaining usable SO4 Raman signals in a field experiment. One of serious difficulties expected in the field experiment would be from fluorescence of phytoplankton and organics.

Houghton, W. M.↗

High-pressure high-temperature synthesis and characterization of B 10 C

The boron-rich boron carbide materials have been traditionally synthesized by adding boron powder to B 4 C material and subjecting it to hot pressing sintering for materials composition containing 8.8–20 at. % carbon in boron (composition range of B 10.4 C to B 4 C). Our study explores a synthesis route for B 10 C starting from high-purity boron and carbon and direct conversion under high pressure and high temperature (HPHT) conditions of 2000 °C and 6–8 GPa. Synthesis was verified via x-ray diffraction analysis, showing the conversion of the high-purity boron and carbon powder mixture into a hexagonal B 10 C structure (R-3m space group) with lattice parameters of a = b = 5.6115 Å and c = 12.197 Å. The concentration of boron was measured through x-ray photoelectron spectroscopy, confirming the B 10 C ratio. The measured nanoindentation mean hardness of B 10 C was 40 GPa. Raman spectroscopy of the HPHT synthesized sample shows characteristic vibrational breathing modes of boron icosahedron and an additional intense band at a vibrational frequency of 380 cm –1 . This Raman band, which appears notably weaker in earlier studies and B 4 C samples, is assigned to the linear chain of B–B–B and attributed to the maximal incorporation of boron within the hexagonal structure.

36 MATERIALS SCIENCE↗

Deciphering the Mechanism of Base-Triggered Conversion of Ammonia to Molecular Nitrogen and Methylamine to Cyanide

Here we report an in-depth investigation into the ammonia oxidation mechanism by the catalyst [Ru III (tpy)(dmabpy)NH 3 ] 3 + ([Ru(NH 3 )] 3 + ). Stoichiometric reactions of [Ru(NH 3 )] 3 + were carried out with exogenous noncoordinating bases to trigger a proposed redox disproportionation reaction, which was followed using variable-temperature NMR spectroscopy. An intermediate species was identified as a dinitrogen-bridged complex using 15 N NMR and Raman spectroscopy on isotopically labeled complexes. This intermediate is proposed to derive from coupling of nitridyl species formed upon sequential redox disproportion reactions. Acetonitrile displaces the dinitrogen bridge to yield free N 2 . DFT calculations support this lower-energy pathway versus that previously reported for ammonia oxidation by the parent [Ru III (tpy)(bpy)NH 3 ] 3 + complex. These experimental and computational results are consistent with the interpretation of redox disproportionation involving sequential hydrogen atom transfer reactions by an amide/aminyl intermediate, [Ru(NH 2 ) – ] + $\Leftrightarrow$ [Ru(NH 2 ) • ] + , formed upon deprotonation of the parent complex. Control experiments employing a large excess of ammonia as a base indicate this new proposed lower-energy pathway contributes to the oxidation of ammonia to dinitrogen in conditions relevant to electrocatalysis. In addition, analogous methylamine complexes, [Ru(NH 2 CH 3 )] 2 + /3 + , were prepared to further test the proposed mechanism. Treating [Ru(NH 2 CH 3 )] 3 + with a base cleanly yields two products [Ru(NH 2 CH 3 )] 2 + and [Ru(CN)] + in an ~3:1 ratio, fully consistent with the proposed cascade of hydrogen atom transfer reactions by an intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phonon modes and Raman signatures of MnBi 2n Te 3n+1 (n=1,2,3,4) magnetic topological heterostructures

An intrinsic antiferromagnetic topological insulator MnBi 2 Te 4 arises when intercalating a Mn-Te bilayer chain in a topological insulator, Bi 2 Te 3 . We present observations on the inter- and intralayer phonon modes of the generalized MnBi 2n Te 3n+1 (n=1,2,3,4) family using cryogenic low-frequency Raman spectroscopy with various polarization configurations. Two peaks at 66 and 112 cm –1 show abnormal perturbation in Raman linewidths below magnetic transition temperature due to spin-phonon coupling. In MnBi 4 Te 7 , B i2 Te 3 layers induce Davydov splitting of the A1g mode around 137 cm –1 at 5 K. The out-of-plane interlayer force constant estimated using the linear chain model was (3.98±0.14)×10 19 N/m 3 , three times weaker than that of Bi 2 Te 3 . Adding more Bi 2 Te 3 layers, such as MnBi 6 Te 10 and MnBi 8 Te 13 , makes Bi 2 Te 3 properties more dominant than magnetic properties. Our work experimentally and theoretically discovers the dynamics of phonon modes of MnBi 2n Te 3n+ 1 family, facilitating utilization of magnetic topological heterostructures.

74 ATOMIC AND MOLECULAR PHYSICS↗

Development of a Raman lidar simulation tool

Raman Lidar is a useful and powerful tool for remote probing of the atmosphere. With Raman Lidars, one can accurately determine the identity and concentration of a particular molecular specie present in the atmosphere. We present the results from a program to develop a simulation capability of Raman Lidar systems for the remote detection of atmospheric gases and/or air polluting hydrocarbons. Our model, which integrates remote Raman spectroscopy with SPARTA's BACKSCAT atmospheric lidar simulation package, permits accurate determination of the performance of a Raman Lidar system. The accuracy with which our model operates is due to the accurate calculation, at any given excitation wavelength, of the differential scattering cross section for the molecular specie under investigation. We show excellent correlation of our calculated cross section data with experimental data from the published literature. In addition, the use of our BACKSCAT package, which provides a user friendly environment to define the operating conditions, provides an accurate calculation of the atmospheric extinction at both the excitation and Raman shifted wavelengths. Our code can be used to accurately predict the performance of a Raman Lidar system, the concentration and identification of a specie in the atmosphere, or the feasibility of making Raman measurements.

Grasso, R. J.↗

Raman scattering of InGaAs/InP grown by uniform radial flow epitaxy

Uniform radial flow epitaxy, a novel growth technique, has been used to grown InGaAs films on InP. Epitaxial layers above and below the critical thickness for the onset of slip were grown. Raman spectroscopy was used to characterize the quality of epitaxial layers, determine alloy composition, and measure the strain. Raman spectra from both pseudomorphic (strained) and relaxed (unstrained) InGaAs films were obtained at 300 and 80 K. The difference in the frequencies of their GaAs-like longitudinal optical phonons was used to calculate stress for the strained InGaAs/InP, leading to a direct formula for the evaluation of the layer stress.

Feng, Z. C.↗

[Methods Used for Monitoring Cure Reactions in Real-time in an Autoclave]

The goal of the research was to investigate methods for monitoring cure reactions in real-time in an autoclave. This is of particular importance to NASA Langley Research Center because polyimides were proposed for use in the High Speed Civil Transport (HSCT) program. Understanding the cure chemistry behind the polyimides would allow for intelligent processing of the composites made from their use. This work has led to two publications in peer-reviewed journals and a patent. The journal articles are listed as Appendix A which is on the instrument design of the research and Appendix B which is on the cure chemistry. Also, a patent has been awarded for the instrumental design developed under this grant which is given as Appendix C. There has been a significant amount of research directed at developing methods for monitoring cure reactions in real-time within the autoclave. The various research efforts can be categorized as methods providing either direct chemical bonding information or methods that provide indirect chemical bonding information. Methods falling into the latter category are fluorescence, dielectric loss, ultrasonic and similar type methods. Correlation of such measurements with the underlying chemistry is often quite difficult since these techniques do not allow monitoring of the curing chemistry which is ultimately responsible for material properties. Direct methods such as vibrational spectroscopy, however, can often be easily correlated with the underlying chemistry of a reaction. Such methods include Raman spectroscopy, mid-IR absorbance, and near-IR absorbance. With the recent advances in fiber-optics, these spectroscopic techniques can be applied to remote on-line monitoring.

Cooper, John B.↗

The Athena Raman Spectrometer

Raman spectroscopy provides a powerful tool for in situ mineralogy, petrology, and detection of water and carbon. The Athena Raman spectrometer is a microbeam instrument intended for close-up analyses of targets (rock or soils) selected by the Athena Pancam and Mini-TES. It will take 100 Raman spectra along a linear traverse of approximately one centimeter (point-counting procedure) in one to four hours during the Mars' night. From these spectra, the following information about the target will extracted: (1) the identities of major, minor, and trace mineral phases, organic species (e.g., PAH or kerogen-like polymers), reduced inorganic carbon, and water-bearing phases; (2) chemical features (e.g. Mg/Fe ratio) of major minerals; and (3) rock textural features (e.g., mineral clusters, amygdular filling and veins). Part of the Athena payload, the miniaturized Raman spectrometer has been under development in a highly interactive collaboration of a science team at Washington University and the University of Alabama at Birmingham, and an engineering team at the Jet Propulsion Laboratory. The development has completed the brassboard stage and has produced the design for the engineering model.

Wang, Alian↗

Surface Analysis of 4-Aminothiophenol Adsorption at Polycrystalline Platinum Electrodes

Formation of self-assembled monolayer (SAM) of 4-aminothiophenol (4-ATP) on polycrystalline platinum electrodes has been studied by surface analysis and electrochemistry techniques. The 4-ATP monolayer was characterized by cyclic voltammetry (CV), Raman spectroscopy, reflection absorption infrared (RAIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). Cyclic voltammetry (CV) experiments give an idea about the packing quality of the monolayer. RAIR and Raman spectra for 4-ATP modified platinum electrodes showed the characteristic adsorption bands for neat 4-ATP indicating the adsorption of 4-ATP molecules on platinum surface. The adsorption on platinum was also evidenced by the presence of sulfur and nitrogen peaks by XPS survey spectra of the modified platinum electrodes. High resolution XPS studies and RAIR spectrum for platinum electrodes modified with 4-ATP indicate that molecules are sulfur-bonded to the platinum surface. The formation of S-Pt bond suggests that ATP adsorption gives up an amino terminated SAM. Thickness of the monolayer was evaluated via angle-resolved XPS (AR-XPS) analyses. Derivatization of 4-ATP SAM was performed using 16-Br hexadecanoic acid.

Rosario-Castro, Belinda I.↗

Extreme Temperature Cryptography Based On Nitrogen-Incorporated Ultrananocrystalline Diamond

Physical entropy sources that remain stable under extreme temperatures are essential for cryptography in emerging technological frontiers in deep space exploration, geothermal energy harvesting, and nuclear energy. However, conventional semiconductor platforms fail to generate stable and reliable cryptographic keys above 200 degrees C due to performance degradation. Here, we report a diamond-based cryptographic primitive that exploits the defect-rich sp 2 -bonded grain boundary network in nitrogen-incorporated ultrananocrystalline diamond (n-UNCD) film as a robust entropy source to generate cryptographic keys that remain operationally stable even after enduring extreme temperatures of 700 degrees C for 54 h while also surviving thermal cycling between room temperature and 700 degrees C for 48 h. The strength of the generated keys is assessed through several cryptographic metrics such as bit uniformity, entropy, hamming distances, and correlation coefficients, all of which are found to be near their respective ideal values. Moreover, the generated keys pass the NIST SP 800 and SP 800-90B tests and are also resilient to supply bias variations and a regression-based machine learning attack model based on the Fourier series. The robustness of the keys is attributed to the better thermal stability and chemical inertness of the n-UNCD film. This is supported by high-resolution energy-dispersive X-ray spectroscopy (EDS), which shows no significant lateral diffusion of metal atoms into the n-UNCD layer, and by Raman spectroscopy, which reveals no significant changes in the bonding configuration of the n-UNCD structure. Our findings highlight the remarkable potential of n-UNCD film for extreme environment cryptography by expanding the operational limits of conventional hardware security platforms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of Americium-Containing Phosphates, Silicates, Borates, Molybdates, and Fluorides Synthesized via High-Temperature Flux Crystal Growth

The crystal chemistry of americium-containing extended structures was investigated, and several classes of americium-containing solid-state oxide materials were obtained in single-crystal form via high-temperature flux crystal growth. This enabled the structural characterization of rare examples of ternary, quaternary, and penternary americium-containing silicates K 3 Am (Si 2 O 7 ) and Cs 6 Am 2 Si 21 O 48 , phosphates Na 3 Am (PO 4 ) 2 and K 3 Am (PO 4 ) 2 , borates Ba 3 Am 2 (BO 3 ) 4 and AmBO 3 , borate halides Ca 5 Am(BO 3 ) 4 Cl, molybdates Li 0.5 Am 0.5 MoO 4 , and fluorides CsAm 2 F 7 . Using these crystallographic data, the ionic radii of Am 3+ with coordination numbers of six (0.975 Å), seven (1.052 Å), and nine (1.162 Å) were established. A maximum entropy method (MEM) analysis was performed on the single-crystal X-ray diffraction data that were collected for K 3 Nd(PO 4 ) 2 /K 3 Am(PO 4 ) 2 , K 3 NdSi 2 O 7 /K 3 AmSi 2 O 7 , and NdBO 3 /AmBO 3 , to qualitatively compare the ionicities of the Nd–O and Am–O bonds. In conclusion, Raman spectroscopy data were collected on single crystals of K 3 Am(PO 4 ) 2 and compared to the calculated Raman spectrum of K 3 Am(PO 4 ) 2 obtained from DFT calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coherent light scattering spectroscopy for supersonic flow measurements

A unified discussion on coherent light scattering spectroscopy and its spectral dependence on molecular gas velocity, temperature and density is presented. The feasibility of using coherent Raman spectroscopy techniques for nonintrusive measurements of supersonic flow parameters is demonstrated and recent laboratory as well as wind tunnel experiments are reviewed. In addition, the advantages of using coherent Rayleigh-Brillouin spectroscopy for measuring high pressure flows are discussed.

She, C. Y.↗