Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Protonation Effects on the Branching Ratio in Photoexcited Single-Walled Nanotube Dispersions

The ensemble PL quantum yield for raw single-walled carbon nanotubes (SWNTs) dispersed in sodium cholate (SC) is {approx}5 times greater than that for the same raw SWNTs dispersed in sodium dodecyl sulfate (SDS) and {approx} 10 times greater than the quantum yield of purified SWNTs dispersed in SC. Absorbance and Raman spectra indicate that purified SC-dispersed SWNTs and raw SDS-dispersed SWNTs are hole-doped by protonation. Experiments comparing PL emission efficiency using E{sub 2} and E{sub 1} excitation show that protonation significantly affects the E{sub 2} {yields} E{sub 1} relaxation process, which has typically been assumed to occur with unit efficiency. The E{sub 2} {yields} E{sub 1} relaxation is 5 times more efficient in producing E{sub 1} PL when SWNTs are unprotonated and protected by the SC surfactant. The results provide clear evidence that extrinsic factors, such as residual acids and the specific nature of SWNT-surfactant and SWNT-solvent interactions, can significantly affect measured SWNT luminescence quantum yields.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photopolymerization in the Fullerene Layers of the Molecular Donor–Acceptor Complex {Pt(nPr_2dtc)_2} · (C{sub 60}){sub 2}

We measured Raman spectra in crystals of molecular donor–acceptor fullerene complexes {Me(nPr_2dtc)_2} · (C{sub 60}){sub 2} (Me = Ni, Cu, Pt). In the spectra of the {Pt(nPr_2dtc)_2} · (C{sub 60}){sub 2} complex under prolonged irradiation with a laser with λ = 532 nm, characteristic changes in the photopolymerization of fullerene are observed, associated with the splitting of degenerate phonon Hg modes and softening of Ag modes of the C{sub 60} molecule. The kinetics of photopolymerization under conditions of weak irradiation at room temperature is studied. It was found that thermal destruction of the photopolymer with increasing temperature leads to a decrease in its concentration in the final photopolymerization product. The kinetics of thermal destruction is described by the Arrhenius equation, with the activation energy E{sub A} of (0.68 ± 0.03) eV; the dimers are destructed to a concentration of 1% within 15 min at ~114°C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improved leakage current and ferromagnetic properties in magnetic field annealed BiFeO{sub 3}-based ceramics

Single-phase Bi{sub 0.85}La{sub 0.15}FeO{sub 3} ceramics were synthesized under various magnetic fields (H{sub a}=0 T, 3 T, 5 T). Substantially reduced leakage current and hence modified ferroelectric (FE) properties were obtained with magnetic field annealing (MA). The largest magnetization and lowest leakage current with large FE polarization (P{sub r}{approx}33 {mu}C/cm{sup 2}) were found in the sample annealed with H{sub a}=3 T. Great changes were also observed in the Raman spectra. All the observed features originate mainly from the different FE domain wall structures induced by MA. These results demonstrate that MA is an effective way to tune the multiferroic and magnetoelectric properties in BiFeO{sub 3}-based materials. - Graphical abstract: Bright field TEM micrograph of the representative domain structures in the samples (a) BLF0, (b) BLF3 and (c) BLF5. Highlights: Black-Right-Pointing-Pointer Bi{sub 0.85}La{sub 0.15}FeO{sub 3} ceramics were synthesized under various magnetic fields. Black-Right-Pointing-Pointer Substantially reduced leakage current with improved ferroelectricity were obtained. Black-Right-Pointing-Pointer Enhanced magnetization with moderate annealing magnetic field.

36 MATERIALS SCIENCE↗

Formation and structural characterization of potassium titanates and the potassium ion exchange property

In the present work, K{sub 2}Ti{sub 2}O{sub 5}, K{sub 2}Ti{sub 4}O{sub 9} and K{sub 2}Ti{sub 6}O{sub 13} are synthesized by solid state method. Their structures and morphologies are characterized by X-ray diffraction, Raman spectra and scanning electron microscopy. The binding energies of K, Ti and O in potassium titanates were then evaluated by X-ray photoelectron spectroscopy and compared with those in K/TiO{sub 2}. Finally the corresponding K ion exchange properties are investigated by synthesizing NO oxidation catalysts with Co(NO{sub 3}){sub 2} precursor. It is found that the binding energy of K in K{sub 2}Ti{sub 2}O{sub 5} is much higher than those in K{sub 2}Ti{sub 4}O{sub 9} and K{sub 2}Ti{sub 6}O{sub 13}, and because of which, it shows quite different catalytic performances. Compared with other potassium titanates, the K in K{sub 2}Ti{sub 2}O{sub 5} is much easier to be exchanged out.

36 MATERIALS SCIENCE↗

Lateral damage in graphene carved by high energy focused gallium ion beams

Raman mapping is performed to study the lateral damage in supported monolayer graphene carved by 30 keV focused Ga{sup +} beams. The evolution of the lateral damage is tracked based on the profiles of the intensity ratio between the D (1341 cm{sup −1}) and G (1582 cm{sup −1}) peaks (I{sub D}/I{sub G}) of the Raman spectra. The I{sub D}/I{sub G} profile clearly reveals the transition from stage 2 disorder into stage 1 disorder in graphene along the direction away from the carved area. The critical lateral damage distance spans from <1 μm up to more than 30 μm in the experiment, depending on the parameters used for carving the graphene. The wide damage in the lateral direction is attributed to the deleterious tail of unfocused ions in the ion beam probe. The study raises the attention on potential sample damage during direct patterning of graphene nanostructures using the focused ion beam technique. Minimizing the total carving time is recommended to mitigate the lateral damage.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Vibrational Spectroscopic Studies on Some Double Alkali Tungstates Belonging to Orthorhombic Class at Room Temperature

Room temperature IR and Raman spectra of rubidium lithium tungstate and sodium lithium tungstates belonging to double alkali tungstate family are investigated using group theoretical methods. Observed internal and lattice modes in both systems studied are assigned. Analysis of spectral behavior reveals that the effect of site potential around tungstates ion is weak and the factor group splitting is operative. Differences in the lattice mode mixing and splitting of internal modes is influenced by the statistical ordering between two alkali ions having large and small ionic radii and is explained using size and charge effect observed earlier in scheelite type of structure. Thus, vibrational spectroscopic analysis may be a tool to understand the alkali ion ordering in double alkali systems.

36 MATERIALS SCIENCE↗

Characterization of high quality InN grown on production-style plasma assisted molecular beam epitaxy system

In this work, the authors report step-flow growth mode of InN on [0001] oriented GaN templates, using a production-style molecular beam epitaxy system, Veeco GEN200 registered , equipped with a plasma source. Using adaptive growth conditions, they have obtained a surface morphology that exhibits the step-flow features. The root mean squared roughness over an area of 5x5 {mu}m{sup 2} is 1.4 nm with monolayer height terrace steps (0.281 nm), based on atomic force microscopy. It has been found that the presence of In droplets leads to defective surface morphology. From x-ray diffraction, they estimate edge and screw dislocation densities. The former is dominant over the latter. Micro-Raman spectra reveal narrow E{sub 2}{sup 2} phonon lines consistent with excellent crystalline quality of the epitaxial layers. The Hall mobility of 1 {mu}m thick InN layers, grown in step-flow mode, is slightly higher than 1400 cm{sup 2}/V s, while for other growth conditions yielding a smooth surface with no well-defined steps, mobility as high as 1904 cm{sup 2}/V s at room temperature has been measured. The samples exhibit high intensity photoluminescence (PL) with a corresponding band edge that shifts with free carrier concentration. For the lowest carrier concentration of 5.6x10{sup 17} cm{sup -3}, they observe PL emission at {approx}0.64 eV.

36 MATERIALS SCIENCE↗

Hydrophobic Reduced Graphene Oxide-Based Ni Coating for Improved Tribological Application

Electrodeposited nickel-graphene oxide (GO) composite coating was produced by pulse electrodeposition method followed by a functionalization with octadecyl amine (ODA) molecules to convert the embedded hydrophilic GO to hydrophobic reduced GO-ODA. Morphology, compositional, and tribological properties were investigated for the functionalized Ni-GO-ODA composite coating. FE-SEM and AFM microscopic studies show the homogeneous presence of embedded GO-ODA particles in the Ni matrix. XRD, EDS, and Raman spectra confirmed the successful functionalization of GO to GO-ODA. Post-functionalization, the water contact angle of the coating shows 111.8°, thereby confirming its hydrophobic nature. Tribological experiments were conducted by using a linear reciprocating ball on flat sliding microtribometer with varying load and sliding speed at ambient dry sliding condition. Experimental results showed that the wear and friction resistance properties were significantly enhanced after functionalization of GO with ODA. With increasing load, the counter surface penetrates into the bulk of the coating and exposes the embedded particles, which further under shear built a surface film which reduces friction. The wear and failure mechanisms of these coatings subjected to tribological testing were also investigated. This work provides a novel approach to design durable functionalized nano-coatings for tribological applications in various industries such as automotive, aerospace, locomotive and renewable energy technologies.

36 MATERIALS SCIENCE↗

Effects of sulfurization time and H{sub 2}S concentration on electrical properties of Cu{sub 2}ZnSnS{sub 4} films prepared by sol–gel method

Highlights: • Cu{sub 2}ZnSnS{sub 4} (CZTS) films were prepared by sol–gel method following sulfurization. • The sulfurization time and H{sub 2}S concentration have the effects on the electrical properties. • The tin loss is increased with the increasing of the sulfurization time. • The secondary phases like ZnS make the electrical properties worse. • The CZTS films sulfurized at 5% H{sub 2}S for 90 min had the best electrical properties. - Abstract: Cu{sub 2}ZnSnS{sub 4} (CZTS) thin films have been successfully deposited by a sol–gel method and sulfurization process. The properties of the films were investigated by varying sulfurization time and H{sub 2}S concentration. X-ray diffraction and Raman spectra analyses revealed the formation of CZTS films with a tetragonal type kesterite structure. With increasing the sulfurization time and H{sub 2}S concentration, the intensity of the kesterite (1 1 2) peak became sharper. The stoichiometric ratios of the CZTS films were different from the precursors, which was due to Sn loss during the sulfurization process. The electrical resistivity and mobility of the films increased while the carrier concentration decreased with increasing the sulfurization time. The CZTS thin films sulfurized at 5% H{sub 2}S concentration for 90 min had the best opto-electrical properties with E{sub g} of 1.41 eV, resistivity of 3.64 Ω cm, carrier concentration of 1.11 × 10{sup 18} cm{sup −3} and mobility of 1.54 cm{sup 2}/(V s) at room temperature for PV application.

36 MATERIALS SCIENCE↗

TiO{sub 2} nanocomposite with reduced graphene oxide through facile blending and its photocatalytic behavior for hydrogen evolution

Graphical abstract: - Highlights: • TRG-COOH nanocomposite as a photocatalyst for hydrogen evolution is prepared. • The reduction of graphene oxide reconstructs a part of conjugated structure. • The band gap is red-shifted due to the reconstruction of conjugated structure. • RG-COOH covered and anchored by P25 blocks the aggregation and the stacking. • The photocatalytic efficiency of TRG-COOH was increased under 500 W Xenon lamp. - Abstract: TRG-COOH nanocomposite is prepared as a photocatalyst for hydrogen evolution by blending TiO{sub 2} with reduced graphene oxide (RG-COOH). TRG-COOH is characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectra, X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM), and photoluminescent spectra. XPS result shows the reduction of monolayer graphene oxide (GO). The band gap is red-shifted from 3.25 eV for P25, which consists of 20% rutile and 80% anatase, to 2.95 eV for TGO and then to 2.80 eV for TRG-COOH due to the introduction of GO and the reconstruction of conjugated structure. TEM image illustrates that RG-COOH in TRG-COOH is covered and anchored by P25, which blocks the aggregation of TiO{sub 2} nanoparticles and the stacking of monolayer graphene. This allows RG-COOH to take a good role of electron-sink and electron-transporting bridge. The photocatalytic efficiency of TRG-COOH is respectively increased under Xenon lamp about 8.9 and 2.7 times compared to P25 and TGO.

36 MATERIALS SCIENCE↗

Enhancement of electric double layer capacitance of carbon nanotubes by gallium ion irradiation

Irradiation by 30 keV Ga{sup +} ions was used to create defects in multiwalled carbon nanotubes. Damage to the graphitic structure of the nanotube wall resulting from ion irradiation was observed by a transmission electron microscope which was accompanied by corresponding changes in Raman spectra. It was found that ion irradiation at 2 x 10{sup 13} ions/cm{sup 2} cumulative dose increases the electric double layer capacitance of a multiwalled carbon nanotube electrode by a factor of 2.3, followed by a decrease and saturation at higher (2 x 10{sup 14} and 4 x 10{sup 14} ions/cm{sup 2}) doses. This might be a trade-off between the enhancement caused by the tip opening and lowering of the capacitance due to amorphization of carbon nanotubes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rovibrational Wave-Packet Dispersion during Femtosecond Laser Filamentation in Air

An impulsive, femtosecond filament-based Raman technique producing high quality Raman spectra over a broad spectral range (1554.7-4155 cm{sup -1}) is presented. The temperature of gas phase molecules can be measured by temporally resolving the dispersion of impulsively excited vibrational wave packets. Application to laser-induced filamentation in air reveals that the initial rovibrational temperature is 300 K for both N{sub 2} and O{sub 2}. The temperature-dependent wave-packet dynamics are interpreted using an analytic anharmonic oscillator model. The wave packets reveal a 1/e dispersion time of 3.9 ps for N{sub 2} and 2.8 ps for O{sub 2}. Pulse self-compression of temporal features to 8 fs within the filament is directly measured by impulsive vibrational excitation of H{sub 2}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Immobilization of Candida antarctic Lipase B on Functionalized Ionic Liquid Modified MWNTs

Multiwalled carbon nanotubes (MWNTs) were modified by imidazole-based ionic liquids with different alkyl groups. The modified support samples were characterized by scanning transmission electron microscopy, Raman spectra, thermogravimetric analyses, and X-ray photoelectron spectroscopy. The samples were used to immobilize Candida antarctic lipase (CALB) and the influence of alkyl chain length of ionic liquids on enzymatic properties was investigated by the hydrolysis reaction of triacetin. The results revealed that functionalized ionic liquids modification did not destroy the structure of MWNTs. Compared with the immobilized CALB on MWNTs, the immobilized CALB on novel carriers all exhibited higher activity, thermal stability, and reusability. Especially, the activity of MWNTs-IL (8C)-CALB improved 15.23-folds than MWNTs-CALB, meanwhile, after incubation at 70 °C for 20 min, residual enzyme activity of MWNTs-IL (8C)-CALB was 46% of the initial activity, while MWNTs-CALB already lost all activity. Besides, MWNTs-IL (8C)-CALB retained 64.5% of its initial activity after 4 cycles, while MWNTs-CALB retained only 2.12%. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of doping ions on the structural defect and the electrical behavior of CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics

Graphical abstract: The dielectric constant decreases with Ta doping, increases with Y doping and keeps almost constant with Zr doping compared with that of pure CCTO. - Highlights: • Y and Ta doping cause different defect types and concentration. • Defect influences the grain boundary mobility and results in different grain size. • Y doping increases the dielectric constant and decreases the nonlinear property. • Ta doping decreases the dielectric constant and enhances the nonlinear property. • Zr doped sample has nearly the defect type and dielectric properties as CaCu{sub 3}Ti{sub 4}O{sub 12}. - Abstract: The microstructure, dielectric and electrical properties of CaCu{sub 3}Ti{sub 4−x}R{sub x}O{sub 12} (R = Y, Zr, Ta; x = 0 and 0.005) ceramics were investigated by XRD, Raman spectra, SEM and dielectric spectrum measurements. Positron annihilation measurements have been performed to investigate the influence of doping on the defects. The results show that all samples form a single crystalline phase. Y and Ta doping cause different defect types and increase the defect size and concentration, which influence the mobility of grain boundary and result in the different grain size. Y doping increases the dielectric constant and decreases the nonlinear property while Ta doping lead to an inverse result. Zr-doped sample has nearly the defect type, grain morphology and dielectric properties as pure CaCu{sub 3}Ti{sub 4}O{sub 12}. The effects of microstructure including the grain morphology and the vacancy defects on the mechanism of the dielectric and electric properties by doping are discussed.

36 MATERIALS SCIENCE↗

Microstructure and tribological properties of Ti-contained amorphous carbon film deposited by DC magnetron sputtering

Pure amorphous carbon (a-C) film and that with a small amount of Ti were deposited on high speed steel (W18Cr4V) substrates by means of dc closed field unbalanced magnetron sputtering. The chemical composition and microstructure of the a-C films were performed using x-ray photoelectron spectroscopy, x-ray diffraction, Raman spectra, and transmission electron microscopy. The mechanical and tribological properties were evaluated using a nanoindentor, Rockwell and scratch tests, and a conventional ball-on-disk tribometer, respectively. The pure a-C film showed the high hardness (53 GPa), elastic modulus (289 GPa), but the poor adhesive strength. When adding a small amount of Ti to the a-C film, both the adhesive strength and the tribological properties were improved. The Ti contained a-C film had the low wear rate (1.9x10{sup -17} m{sup 3} N{sup -1} m{sup -1}) and friction coefficient in humid air.

36 MATERIALS SCIENCE↗

Structure-specific reactivity of alumina supported monomeric vanadium oxide species.

Oxidative dehydrogenation (ODH) catalysts based on vanadium oxide are active for the production of alkenes, chemicals of great commercial importance. The current industrial practice for alkene production is based on energy-intensive, dehydrogenation reactions. UV resonance and visible Raman measurements, combined with density functional studies, are used to study for the first time the structure-reactivity relationships for alumina-supported monomeric vanadium oxide species. The relationship between the structure of three vanadium oxide monomeric surface species on a {theta}-alumina surface, and their reducibility by H{sub 2} was determined by following changes in the vanadia's UV Raman and resonance Raman spectra after reaction with H{sub 2} at temperatures from 450 to 650 C. The H{sub 2} reducibility sequence for the three monomeric species is bidentate > 'molecular' > tridentate. The reaction pathways for H{sub 2} reduction on the three vanadium oxide monomeric structures on a {theta}-alumina surface were investigated using density functional theory. Reduction by H{sub 2} begins with reaction at the V=O bond in all three species. However, the activation energy, Gibbs free energy change under reaction conditions, and the final V oxidation state are species-dependent. The calculated ordering of reactivity is consistent with the observed experimental ordering and provides an explanation for the ordering. The results suggest that synthesis strategies can be devised to obtain vanadium oxide structures with greatly enhanced activity for ODH resulting in more efficient catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relevance of supramolecular interactions, texture and lattice occupancy in the designer iron(II) spin crossover complexes

New Fe{sup II} complexes of formula [Fe(3-Br-phen){sub 2}(NCS){sub 2}].Solvent (Solvent=0.5 CH{sub 3}OH (1), 2 CH{sub 2}Cl{sub 2} (2), desolvation of 2 (3), 0.5 CH{sub 3}COCH{sub 3} (4) and 0 (5)) have been synthesized. {sup 57}Fe Moessbauer and magnetic investigation reveal unique features atypical of classic [Fe(phen){sub 2}(NCS){sub 2}] polymorphs. Complex 1, prepared by precipitation in MeOH, undergoes upon cooling below room temperature an incomplete and gradual thermally induced spin conversion, while 4 prepared by an extraction method remains mostly in the low-spin state. The non solvated compounds 3 and 5, display a more abrupt spin crossover on cooling around T{sub 1/2}=175 K and T{sub 1/2}=198 K, respectively. Defects/soft lattice inclusion due to different methods of material synthesis, extent of aging, reaction medium and associated solvent molecules have enormous influence on the particle size and magnetic properties of these complexes. Scanning electron micrographs helps to establish a logical relationship among methods employed for synthesis, texture of materials and their effect on magnetic properties. The crystal structure of 2 determined in the monoclinic space group P2/c (100 K) reveals a mononuclear complex consisting of a distorted FeN{sub 6} octahedron in the low-spin state, constructed from two 3-bromo-1, 10-phenanthroline and two isothiocyanato anions in cis position. Intermolecular interactions between mononuclear units of the S...Br, S...C(H) and pi-pi type afford a 2D supramolecular network. DFT calculations for the single molecule 2 reveals an energy difference between high-spin and low-spin isomers of 7 kJ/mol suggesting a slight destabilization of the low-spin state compared to [Fe(phen){sub 2}(NCS){sub 2}]. Normal co-ordinate analysis was also carried out for 3 and compared with experimental temperature dependent Raman spectra for 5. - Graphical abstract: New Fe{sup II} complexes of formula [Fe(3-Br-phen){sub 2}(NCS){sub 2}].Solvent have been synthesized by precipitation (1) and extraction (4) methods. {sup 57}Fe Moessbauer and magnetic investigation reveal unique features atypical of classic [Fe(phen){sub 2}(NCS){sub 2}] polymorphs. Complex 1, undergoes upon cooling below room temperature an incomplete and gradual thermally induced spin conversion, while 4 remains mostly in the low-spin state. Role of supramolecular interactions, particles size, lattice solvents have profound influence on magnetic properties.

36 MATERIALS SCIENCE↗

Facile synthesis of ZnO nanostructures and investigation of structural and optical properties

ZnO nanostructures were synthesized by chemical bath deposition method, using zinc nitrate [Zn(NO{sub 3}){sub 2}] and hexa-methylene-tetra-amine [(HMT),C(H{sub 2}){sub 6}N{sub 4}] as precursors. Controlled size and shape evolution of ZnO nanostructures were achieved by changing the HMT concentration from 0.025 M to 0.1 M, whereas Zn(NO{sub 3}){sub 2} concentration kept constant. X-ray diffraction (XRD) and Raman study confirmed the formation of single crystalline, hexagonal wurtzite ZnO structure. Sharp peaks in Raman spectra, corresponding to E{sub 2}(low) and E{sub 2}(high) referred to wurtzite structure with higher order of crystallinity. Transmission electron microscopy (TEM) revealed that the shape and size of the nanostructures reduced, with increasing concentration of HMT. Further, effect of structure's size was observed in the band gap (shift). Photoluminescence study showed two peaks at ∼ 380 nm and ∼ 540 nm corresponding to the band to band transition and defect transitions. Modifications of properties are explained in detail on the basis of shape and size change of the structures and possible mechanism is discussed. - Highlights: • ZnO nanostructures were synthesized by chemical bath deposition method. • Particle’s shape and sizes were controlled by varying the HMT concentrations. • Effect of particle’s sizes was observed in the band gap (shift) and photoluminescence. • HMT is an effective suppressor of ZnO directional growth. • Shape evolution of ZnO particles can be tailored by varying the HMT concentrations.

36 MATERIALS SCIENCE↗