Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “R MATRIX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

From amorphous to nanocrystalline: the effect of nanograins in amorphous matrix on the thermal conductivity of hot-wire chemical-vapor deposited silicon films

Here, we have measured the thermal conductivity of amorphous and nanocrystalline silicon films with varying crystalline content from 85K to room temperature. The films were prepared by the hot-wire chemical-vapor deposition, where the crystalline volume fraction is determined by the hydrogen (H2) dilution ratio to the processing silane gas (SiH4), R=H2/SiH4. We varied R from 1 to 10, where the films transform from amorphous for R < 3 to mostly nanocrystalline for larger R. Structural analyses show that the nanograins, averaging from 2 to 9nm in sizes with increasing R, are dispersed in the amorphous matrix. The crystalline volume fraction increases from 0 to 65% as R increases from 1 to 10. The thermal conductivities of the two amorphous silicon films are similar and consistent with the most previous reports with thicknesses no larger than a few um deposited by a variety of techniques. The thermal conductivities of the three nanocrystalline silicon films are also similar, but are about 50-70% higher than those of their amorphous counterparts. The heat conduction in nanocrystalline silicon films can be understood as the combined contribution in both amorphous and nanocrystalline phases, where increased conduction through improved nanocrystalline percolation path outweighs increased interface scattering between silicon nanocrystals and the amorphous matrix.

36 MATERIALS SCIENCE↗

Nonlinear Bogolyubov-Valatin transformations: Two modes

Extending our earlier study of nonlinear Bogolyubov-Valatin transformations (canonical transformations for fermions) for one fermionic mode, in the present paper, we perform a thorough study of general (nonlinear) canonical transformations for two fermionic modes. We find that the Bogolyubov-Valatin group for n=2 fermionic modes, which can be implemented by means of unitary SU(2{sup n}=4) transformations, is isomorphic to SO(6;R)/Z{sub 2}. The investigation touches on a number of subjects. As a novelty from a mathematical point of view, we study the structure of nonlinear basis transformations in a Clifford algebra [specifically, in the Clifford algebra C(0,4)] entailing (supersymmetric) transformations among multivectors of different grades. A prominent algebraic role in this context is being played by biparavectors (linear combinations of products of Dirac matrices, quadriquaternions, sedenions) and spin bivectors (antisymmetric complex matrices). The studied biparavectors are equivalent to Eddington's E-numbers and can be understood in terms of the tensor product of two commuting copies of the division algebra of quaternions H. From a physical point of view, we present a method to diagonalize any arbitrary two-fermion Hamiltonians. Relying on Jordan-Wigner transformations for two-spin-1/2 and single-spin-3/2 systems, we also study nonlinear spin transformations and the related problem of diagonalizing arbitrary two-spin-1/2 and single-spin-3/2 Hamiltonians. Finally, from a calculational point of view, we pay due attention to explicit parametrizations of SU(4) and SO(6;R) matrices (of respective sizes 4x4 and 6x6) and their mutual relation. - Highlights: > Reveals the structure of nonlinear canonical transformations for two fermionic modes. > Studies nonlinear basis transformations in a Clifford algebra. > Focuses on methodological and structural aspects. > Presents a new approach to the diagonalization of 4x4 matrix Hamiltonians. > Presents the relation between explicit parametrizations of SU(4) and SO(6;R) matrices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Morphology, structure, and chemistry of nanoclusters in a mechanically alloyed nanostructured ferritic steel

Nanostructured ferritic steels have excellent high temperature creep properties and radiation tolerance due to the presence of a high density of Ti-Y-O-enriched nanoclusters. The morphology of the nanoclusters is found to be consistent with a truncated rhombic dodecahedron defined by the {l_brace}100{r_brace} and {l_brace}110{r_brace} planes in the Fe matrix. The derived symmetry and the compositional information indicate that the nanoclusters are inconsistent with the cubic Y2Ti2O7 or the polymorphs of Y2TiO5 phase. Possible structural models are discussed.

36 MATERIALS SCIENCE↗

Approximations for the interparticle interaction energy in an exactly solvable two-electron model atom

The capability of different ansatz kernels, denoted as K(r,r{sup '}), in the calculation of the electron-electron interaction energy is investigated here for an exactly solvable two-electron model atom proposed by Moshinsky. The model atom is in the spin-compensated, paramagnetic ground state. The exact expression for the interaction energy in this state, derived by the diagonal of the second-order density matrix, is used as a rigorous background for comparison. It is found that the form of K{sub M}(r,r{sup '})=2rho(r)rho(r{sup '})-gamma{sup p}(r,r{sup '})gamma{sup q}(r{sup '},r), expressed via the rho(r) density distributions and operator powers of the one-body density matrix gamma(r,r{sup '}), results in the exact value for the interparticle interaction energy of the two-electron model atom if and only if p=q=1/2. Approximate forms with p=qnot =1/2 and with pnot =q at (p+q)=1 give deviations from the exact expression.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural mechanism of the formation of mineral Na-tveitite-a new type of phase with a fluorite-derivative structure-in the NaF-CaF{sub 2}-(Y,Ln)F{sub 3} natural system

Relationships between the chemical compositions and structures of the mineral tveitite from the southern Norway pegmatites (with the idealized formula Ca{sub 14}Y{sub 5}F{sub 43}) and Na-tveitite from the Rov mountain (Keivy, Kola Peninsula) Na{sub 2.5}Ca{sub 10}Ln{sub 1.5}Y{sub 5}F{sub 42} are considered. According to the structural mechanism of its formation, Na-tveitite is a nanocomposite crystal based on the crystalline matrix Ca{sub 14}Y{sub 5}F{sub 43} with the ordered arrangement of {l_brace}Ca{sub 8}[CaY{sub 5}]F{sub 69}{r_brace} clusters which contain anionic {l_brace}F{sub 13}{r_brace} cuboctahedra with F{sup 1-} at the center. When Na-tveitite is formed, 29% of these clusters are statistically replaced by Na-'Y' clusters {l_brace}[Na{sub 0.5}(Y,Ln){sub 0.5}]{sub 14}F{sub 64}{r_brace} with {l_brace}F{sub 8}{r_brace} cubes at the center (analogs of matrix fluorite groups {l_brace}Ca{sub 14}F{sub 64}{r_brace}). This replacement gives rise to composition-imperfect (Na, Ca, 'Y') cationic positions and occupancy-deficient F positions, which correspond to {l_brace}F{sub 13}{r_brace} cuboctahedra and the {l_brace}F{sub 8}{r_brace} cubes that replace them. The difference between Na-tveitite and fluorite phases M{sub 1-x}R{sub x}F{sub 2+x} is as follows: its matrix is the structure of the ordered phase (tveitite) into which Na-containing rare earth fragments of fluorite-type structure are incorporated instead of ordered-phase structural blocks (clusters).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fission Matrix Processing Using the MCNP6.3 HDF5 Restart File

This paper describes an approach to interrogating the fission matrix available in the HDF5-formatted restart file (also known as the “runtape” file), which is produced by the upcoming public release of the MCNP R code, version 6.3. The fission matrix, its eigenvalues, and its eigenvectors, are important tools for characterizing fissile systems such as research and power reactors and for accelerating the convergence of the Monte Carlo fission-source site distribution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Influence of conservative corrections on parameter estimation for extreme-mass-ratio inspirals

We present an improved numerical kludge waveform model for circular, equatorial extreme-mass-ratio inspirals (EMRIs). The model is based on true Kerr geodesics, augmented by radiative self-force corrections derived from perturbative calculations, and in this paper for the first time we include conservative self-force corrections that we derive by comparison to post-Newtonian results. We present results of a Monte Carlo simulation of parameter estimation errors computed using the Fisher matrix and also assess the theoretical errors that would arise from omitting the conservative correction terms we include here. We present results for three different types of system, namely, the inspirals of black holes, neutron stars, or white dwarfs into a supermassive black hole (SMBH). The analysis shows that for a typical source (a 10M{sub {center_dot}} compact object captured by a 10{sup 6}M{sub {center_dot}} SMBH at a signal to noise ratio of 30) we expect to determine the two masses to within a fractional error of {approx}10{sup -4}, measure the spin parameter q to {approx}10{sup -4.5}, and determine the location of the source on the sky and the spin orientation to within 10{sup -3} steradians. We show that, for this kludge model, omitting the conservative corrections leads to a small error over much of the parameter space, i.e., the ratio R of the theoretical model error to the Fisher matrix error is R<1 for all ten parameters in the model. For the few systems with larger errors typically R<3 and hence the conservative corrections can be marginally ignored. In addition, we use our model and first-order self-force results for Schwarzschild black holes to estimate the error that arises from omitting the second-order radiative piece of the self-force. This indicates that it may not be necessary to go beyond first order to recover accurate parameter estimates.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Routes to fractality and entropy in Liesegang systems

Liesegang bands are formed when solutions of co-precipitate ions interdiffuse in a 1D gel matrix. In a recent study [R. F. Sultan, Acta. Mech. Sin. 27, 119 (2011)], Liesegang patterns have been characterized as fractal structures. In addition to experimentally obtained patterns, geometric Liesegang patterns were constructed in conformity with the well-known empirical laws. Both mathematical fractal dimensions and box count dimensions for images of PbF{sub 2} and PbI{sub 2} Liesegang patterns have been calculated. Liesegang patterns can also be described by the entropy state function, and categorized as more or less ordered structures. We revisit the relation between entropy and fractal dimension, and apply it to simulated geometrical Liesegang patterns. We have resort to three different routes for the estimation of the entropy of a Liesegang pattern. The HarFA software enabled the calculation of the Hausdorff dimension and the topological entropy, then the information dimension and the Shannon entropy. In a third pathway, analytical calculations were carried out by estimating the probability of occurrence of a fractal element or coverage. The product of Shannon entropy and Boltzmann constant yields the thermodynamic entropy. The values for PbF{sub 2} and PbI{sub 2} Liesegang patterns attained the order of magnitude of the reported Third Law entropies, but yet remained lower, in conformity with the more ordered Liesegang structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Accurate transport properties for O( 3 P )–H and O( 3 P )–H 2

Transport properties for collisions of oxygen atoms with hydrogen atoms and hydrogen molecules have been computed by means of time-independent quantum scattering calculations. For the O( 3 P)–H( 2 S) interaction, potential energy curves for the four OH electronic states emanating from this asymptote were computed by the internally-contracted multi-reference configuration interaction method, and the R-dependent spin-orbit matrix elements were taken from Parlant and Yarkony [J. Chem. Phys. 110, 363 (1999)]. For the O( 3 P)–H 2 interaction, diabatic potential energy surfaces were derived from internally contracted multi-reference configuration interaction calculations. Transport properties were computed for these two collision pairs and compared with those obtained with the conventional approach that employs isotropic Lennard-Jones (12-6) potentials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

(2 + 1) resonant enhanced multiphoton ionization of H2 via the E,F 1Sigma(+)g state

In this paper, the results of ab initio calculations of photoelectron angular distributions and vibrational branching ratios for the (2 + 1) resonant enhanced multiphoton ionization (REMPI) of H2 via the E,F 1Sigma(+)g state are reported, and these are compared with the experimental data of Anderson et al. (1984). These results show that the observed non-Franck-Condon behavior is predominantly due to the R dependence of the transition matrix elements, and to a lesser degree to the energy dependence. This work presents the first molecular REMPI study employing a correlated wave function to describe the Rydberg-valence mixing in the resonant intermediate state.

Rudolph, H.↗

Transferring elements of a density matrix

We study restrictions imposed by quantum mechanics on the process of matrix-element transfer. This problem is at the core of quantum measurements and state transfer. Given two systems A and B with initial density matrices lambda and r, respectively, we consider interactions that lead to transferring certain matrix elements of unknown lambda into those of the final state r-tilde of B. We find that this process eliminates the memory on the transferred (or certain other) matrix elements from the final state of A. If one diagonal matrix element is transferred, r(tilde sign){sub aa}=lambda{sub aa}, the memory on each nondiagonal element lambda{sub an}ot ={sub b} is completely eliminated from the final density operator of A. Consider the following three quantities, Relambda{sub an}ot ={sub b}, Imlambda{sub an}ot ={sub b}, and lambda{sub aa}-lambda{sub bb} (the real and imaginary part of a nondiagonal element and the corresponding difference between diagonal elements). Transferring one of them, e.g., Rer(tilde sign){sub an}ot ={sub b}=Relambda{sub an}ot ={sub b}, erases the memory on two others from the final state of A. Generalization of these setups to a finite-accuracy transfer brings in a trade-off between the accuracy and the amount of preserved memory. This trade-off is expressed via system-independent uncertainty relations that account for local aspects of the accuracy-disturbance trade-off in quantum measurements. Thus, the general aspect of state disturbance in quantum measurements is elimination of memory on non-diagonal elements, rather than diagonalization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Riemann surface approach to bound and resonant states for a nonlocal potential

The Riemann surface approach to bound and resonant states is extended to the case of a separable nonlocal potential that is constant on a certain domain of the inner region and vanishes in the rest of the domain. The approach consists in the construction of the Riemann surface R{sub g} of the S-matrix pole function k=k(g) over the g-plane, where g is the strength of the complex nonlocal potential. On the Riemann surface R{sub g} the pole function k=k(g) is single-valued and analytic. The branch points of the pole function k=k(g) and their k-plane images are determined and analyzed as a function of the position of the region of nonlocality. The Riemann surface of the S-matrix pole function is constructed. According to the Riemann surface approach to each bound or resonant state a sheet of the Riemann surface R{sub g} is associated. All the natural modes (bound and resonant states) of the system are identified and treated in a unified way. The nonlocal potential generates narrow resonant states that cannot be produced by a local potential.

97 MATHEMATICS AND COMPUTING↗

Commensurability effects in one-dimensional Anderson localization: Anomalies in eigenfunction statistics

Highlights: > Statistics of normalized eigenfunctions in one-dimensional Anderson localization at E = 0 is studied. > Moments of inverse participation ratio are calculated. > Equation for generating function is derived at E = 0. > An exact solution for generating function at E = 0 is obtained. > Relation of the generating function to the phase distribution function is established. - Abstract: The one-dimensional (1d) Anderson model (AM), i.e. a tight-binding chain with random uncorrelated on-site energies, has statistical anomalies at any rational point f=(2a)/({lambda}{sub E}) , where a is the lattice constant and {lambda}{sub E} is the de Broglie wavelength. We develop a regular approach to anomalous statistics of normalized eigenfunctions {psi}(r) at such commensurability points. The approach is based on an exact integral transfer-matrix equation for a generating function {Phi}{sub r}(u, {phi}) (u and {phi} have a meaning of the squared amplitude and phase of eigenfunctions, r is the position of the observation point). This generating function can be used to compute local statistics of eigenfunctions of 1d AM at any disorder and to address the problem of higher-order anomalies at f=p/q with q > 2. The descender of the generating function P{sub r}({phi}){identical_to}{Phi}{sub r}(u=0,{phi}) is shown to be the distribution function of phase which determines the Lyapunov exponent and the local density of states. In the leading order in the small disorder we derived a second-order partial differential equation for the r-independent ('zero-mode') component {Phi}(u, {phi}) at the E = 0 (f=1/2 ) anomaly. This equation is nonseparable in variables u and {phi}. Yet, we show that due to a hidden symmetry, it is integrable and we construct an exact solution for {Phi}(u, {phi}) explicitly in quadratures. Using this solution we computed moments I{sub m} = N< vertical bar {psi} vertical bar {sup 2m}> (m {>=} 1) for a chain of the length N {yields} {infinity} and found an essential difference between their m-behavior in the center-of-band anomaly and for energies outside this anomaly. Outside the anomaly the 'extrinsic' localization length defined from the Lyapunov exponent coincides with that defined from the inverse participation ratio ('intrinsic' localization length). This is not the case at the E = 0 anomaly where the extrinsic localization length is smaller than the intrinsic one. At E = 0 one also observes an anomalous enhancement of large moments compatible with existence of yet another, much smaller characteristic length scale.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Computing the pseudo-inverse

Orthogonalization algorithm for producing pseudo inverse of matrix, and realization of algorithm with Fortran program

ORTHOGONAL FUNCTION↗

Affordable Fiber-Reinforced Ceramic Composites Win 1995 R and D 100 Award

Affordable fiber-reinforced ceramic matrix composites (AFReCC) with high strength and toughness, good thermal conductivity, thermal shock resistance, and oxidation resistance are needed for high-temperature structural applications. AFReCC materials will have various applications in advanced high-efficiency and high-performance engines: that is, the High Speed Civil Transport (HSCT), space propulsion components, and land-based systems. For example, silicon-carbide-fiber-reinforced silicon carbide matrix composites show promise for meeting the criteria of high strength, thermal conductivity, and toughness required for the HSCT combustor liner. AFReCC received R&D Magazine's prestigious R&D 100 Award in 1995. The fabrication process for these composites has three steps. In the first step, fiber preforms are made and chemical vapor infiltration is used to apply the desired interface coating on the fibers. This step also rigidizes the preform. The second step consists of resin infiltration, which after pyrolysis, yields an interconnected network of porous carbon as the matrix. In the final step of the process, the carbon-containing preform is infiltrated with molten silicon or silicon alloys in a furnace. This converts the carbon to silicon carbide leaving as little as 5 percent residual free silicon or refractory disilicide phase. This process is suitable for any type of small-diameter fiber (e.g., carbon, alumina, or silicon carbide) woven into a two- or three-dimensional architecture. This processing approach leads to dense composites where matrix microstructure and composition can be tailored for optimum properties. It has much lower processing cost (less than 50 percent) in comparison to other approaches to fabricating silicon-carbide-based composites. The photograph shows the various AFReCC components. Thermomechanical and thermochemical characterization of these composites under the hostile environments that will be encountered in engine applications is underway.

Source record↗