Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process based assessment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Electrochemical Characterization of Semiconductor Materials and Structures

For a period covering October 1, 1995 through August 12, 1996, the research group at CSU has conducted theoretical and experimental research on "Electrochemical Characterization of Semiconductor Materials and Structures. " The objective of this investigation was to demonstrate the applicability of electrochemical techniques for characterization of complex device structures based on InP and GaAs, Ge, InGaAs, InSb, InAs and InSb, including: (1) accurate EC-V net majority carrier concentration depth profiling, and (2) surface and bulk structural and electrical type defect densities. Our motivation for this R&D effort was as follows: "Advanced space solar cells and ThermoPhotoVoltaic (TPV) cells are fabricated using a large variety of III-V materials based on InP and GaAs for solar cells and low bandgap materials such as Ge, InGaAs, InAs and InSb for TPV applications. At the present time for complex device structures using these materials, however, there is no simple way to assess the quality of these structures prior to device fabrication. Therefore, process optimization is a very time consuming and a costly endeavor". Completion of this R&D effort would have had unquestionable benefits for space solar cell and TPV cells, since electrochemical characterization of the above cell structures, if properly designed can provide many useful structural and electrical material information virtually at any depth inside various layers and at the interfaces. This, could have been applied for step-by-step process optimization, which could have been used for fabrication of new generation high efficiency, low cost space PV and TPV cells.

Source record↗
NASA NTRS2010

Toward Right-Fidelity Rotorcraft Conceptual Design

The aviation Advanced Design Office (ADO) of the US Army Aeroflightdynamics Directorate (AMRDEC) performs conceptual design of advanced Vertical Takeoff and Landing (VTOL) concepts in support of the Army's development and acquisition of new aviation systems. In particular, ADO engages in system synthesis to assess the impact of new technologies and their application to satisfy emerging warfighter needs and requirements. Fundamental to ADO being successful in accomplishing its role; is the ability to evaluate a wide array of proposed air vehicle concepts, and independently synthesize new concepts to inform Army and DoD decision makers about the tradespace in which decisions will be made (Figure 1). ADO utilizes a conceptual design (CD) process in the execution of its role. Benefiting from colocation with NASA rotorcraft researchers at the Ames Research Center, ADO and NASA have engaged in a survey of the current rotorcraft PD practices and begun the process of improving those capabilities to enable effective design and development of the next generation of VTOL systems. A unique aspect of CD in ADO is the fact that actual designs developed in-house are not intended to move forward in the development process. Rather, they are used as reference points in discussions about requirements development and technology impact. The ultimate products of ADO CD efforts are technology impact assessments and specifications which guide industry design activity. The fact that both the requirement and design are variables in the tradespace adds to the complexity of the CD process. A frequent need is ability to assess the relative "cost" of variations in requirement for a diverse set of VTOL configurations. Each of these configurations may have fundamentally different response characteristics to this requirement variation, and such insight into how different requirements drive different designs is a critical insight ADO attempts to provide decision makers. The processes and tools utilized are driven by the timeline in which questions must be answered. This can range from quick "back-of-the-envelope" assessments of a configuration made in an afternoon, to more detailed tradespace explorations that can take upwards of a year to complete. A variety of spreadsheet based tools and conceptual design codes are currently in use. The in-house developed conceptual sizing code RC (Rotorcraft) has been the preferred tool of choice for CD activity for a number of years. Figure 2 illustrates the long standing coupling between RC and solid modeling tools for layout, as well as a number of ad-hoc interfaces with external analyses. RC contains a sizing routine that is built around the use of momentum theory for rotors, classic finite wing theory, a referred parameter engine model, and semi-emperical weight estimation techniques. These methods lend themselves to rapid solutions, measured in seconds and minutes. The successful use of RC, however requires careful consideration of model input parameters and judicious comparison with existing aircraft to avoid unjustified extrapolation of results. RC is in fact a legacy of a series of codes whose development started in the early 1970s, and is best suited to the study of conventional helicopters and XV-15 style tiltrotors. Other concepts have been analyzed with RC, but typically it became necessary to modify the source code and methods for each unique configuration. Recent activity has lead to the development of a new code, NASA Design and Analysis of Rotorcraft (NDARC). NDARC uses a similar level of analytical fidelity as RC, but is built on a new framework intended to improve modularity and ability to rapidly model a wider array of concepts. Critical to achieving this capability is the decomposition of the aircraft system into a series of fundamental components which can then be assembled to form a wide-array of configurations. The paper will provide an overview of NDARC and its capabilities.

Sinsay, Jeffrey D.↗
NASA NTRS2012

Performance Characterization and Simulation of Amine-Based Vacuum Swing Sorption Units for Spacesuit Carbon Dioxide and Humidity Control

Controlling carbon dioxide (CO2) and water (H2O) vapor concentrations in a space suit is critical to ensuring an astronauts safety, comfort, and capability to perform extra-vehicular activity (EVA) tasks. Historically, this has been accomplished using lithium hydroxide (LiOH) and metal oxide (MetOx) canisters. Lithium hydroxide is a consumable material that requires priming with water before it becomes effective at removing carbon dioxide. MetOx is regenerable through a power-intensive thermal cycle but is significantly heavier on a volume basis than LiOH. As an alternative, amine-based vacuum swing beds are under aggressive development for EVA applications. The vacuum swing units control atmospheric concentrations of both CO2 and H2O through fully-regenerative process. The current concept, referred to as the rapid cycle amine (RCA), has resulted in numerous laboratory prototypes. Performance of these prototypes have been assessed experimentally and documented in previous reports. To support developmental e orts, a first principles model has also been established for the vacuum swing sorption technology. For the first time in several decades, a major re-design of Portable Life Support System (PLSS) for the extra-vehicular mobility unit (EMU) is underway. NASA at Johnson Space Center built and tested an integrated PLSS test bed of all subsystems under a variety of simulated EVA conditions of which the RCA prototype played a significant role. The efforts documented herein summarize RCA test performance and simulation results for single and variable metabolic rate experiments in an integrated context. In addition, a variety of off-nominal tests were performed to assess the capability of the RCA to function under challenging circumstances. Tests included high water production experiments, degraded vacuum regeneration, and deliberate valve/power failure and recovery.

Swickrath, Michael J.↗
NASA NTRS2021

A Study of Lessons and Experiences of NASA Centers in the Use of Commercial Off the Shelf (COTS) Electronics

The NASA Engineering and Safety Center (NESC) sponsored a Technical Assessment relating to the utilization of commercial-off-the-shelf (COTS) electrical, electronic, and electromechanical (EEE) parts in spaceflight systems at NASA Centers. The assessment had two primary goals. The first was to capture each NASA Centers’ current practices, best practices, lessons learned and Center-proposed recommendations on the use of COTS EEE parts and assemblies in critical ground support equipment (GSE). The second was to provide recommendations on the use of COTS, including a set of current best practices based on the Centers’ current and best practices and the NESC team’s discussions. One key achievement made by the assessment team was the characterization of the term Industry Leading Parts Manufacturers (ILPMs) as parts manufacturer with high volume automatic production facilities and which can provide documented proof of the technology, process and product qualification, and its implementation of the best practices for “zero defects” for parts quality, reliability and workmanship. The assessment concluded with numerous findings, takeaways and recommendations that will be discussed during this presentation.

commercial↗
NASA NTRS2022

Evaluation of High Mountain Asia-Land Data Assimilation System (version 1) from 2003 to 2016: 2. The impact of assimilating satellite-based snow cover and freeze/thaw observations into a land surface model

This second paper of the two-part series focuses on demonstrating the impact of assimilating satellite-based snow cover and freeze/thaw observations into the hyper-resolution, offline terrestrial modeling system used for the High Mountain Asia (HMA) region from 2003 to 2016. To this end, this study systematically evaluates a total of six sets of 0.01° (∼1 km) model simulations forced by different precipitation forcings, with and without the dual assimilation scheme enabled, at point-scale, basin-scale, and domain-scale. The key variables of interest include surface net shortwave radiation, surface net longwave radiation, skin temperature, near-surface soil temperature, snow depth, snow water equivalent (SWE), and total runoff. First, the point-scale assessment is mainly conducted via evaluating against ground-based measurements. In general, the assimilation enabled estimates are better than no-assimilation counterparts. Second, the basin-scale runoff assessment demonstrates that across three snow-dominated basins, the assimilation enabled experiment yields systematic improvements in all goodness-of-fit statistics through mitigating the negative effects brought by the fixed long-term precipitation correction factors. For example, when forced by the bias-corrected precipitation, the assimilation-enabled experiment improves the bias by 69%, the root-mean-squared error by 30%, and the unbiased root-mean-squared error by 18% (relative to the no-assimilation counterpart). Finally, the domain-scale assessment is conducted via evaluating against satellite-based SWE and skin temperature products. Both sets of domain-scale analysis further corroborate the findings in the point-scale evaluations. Overall, this study suggests the benefits of the proposed multi-variate assimilation system in improving the cryospheric-hydrological process within a land surface model for use in HMA.

Yuan Xue↗
NASA NTRSDate not supplied

Towards an Aviation Large Language Model by Fine-tuning and Evaluating Transformers

In the aviation domain, there are many applications for machine learning and artificial intelligence tools that utilize natural language. For example, there is a desire to know the commonalities in written safety reports such as voluntary post incidents reports or create more accurate transcripts of air traffic management conversations. Another use-case is the possibility of extracting airspace procedures and constraints currently written in documents such as Letters of Agreement (LOA) which is used as the evaluation case in this paper. These applications can benefit from the use of state-of-the-art Natural Language Processing (NLP) techniques when adapted to the language/phraseology specific to the aviation domain. This paper evaluates the viability of transferring pre-trained large language models to the aviation domain by adapting transformer based models using aviation datasets. This paper utilized two datasets to adapt a ‘Robustly Optimized Bidirectional Encoder Representations from Transformers Approach’ (RoBERTa) model and two down-stream classification tasks to assess its performance. These datasets are all built upon Letters of Agreement which are Federal Aviation Administration (FAA) documents that formalize airspace operations across the national airspace system. The first two datasets are used for the adaptation of RoBERTa to the aviation domain and were of different sizes to assess the number of documents needed to adapt to the aviation domain. They contain many examples of ‘aviation English’ using domain specific terminology and phrasing which serves as a representative basis to perform the unsupervised adaptation. The second dataset is a separate set of LOA documents with two sets of classification labels to be used for evaluation; one at the document level and one at the line level. These down-stream evaluations allowed the measurement of improvement by adapting RoBERTa. The accuracy increased by 4-6% on both tasks and the F1 score on the class of interest increased by 4-8% from the adaptation.

Air Traffic Management↗
NASA NTRSDate not supplied

Towards an Aviation Large Language Model by Fine-tuning and Evaluating Transformers

In the aviation domain, there are many applications for machine learning and artificial intelligence tools that utilize natural language. For example, there is a desire to know the commonalities in written safety reports such as voluntary post incidents reports or create more accurate transcripts of air traffic management conversations. Another use-case is the possibility of extracting airspace procedures and constraints currently written in documents such as Letters of Agreement (LOA) which is used as the evaluation case in this paper. These applications can benefit from the use of state-of-the-art Natural Language Processing (NLP) techniques when adapted to the language/phraseology specific to the aviation domain. This paper evaluates the viability of transferring pre-trained large language models to the aviation domain by adapting transformer based models using aviation datasets. This paper utilized two datasets to adapt a ‘Robustly Optimized Bidirectional Encoder Representations from Transformers Approach’ (RoBERTa) model and two down-stream classification tasks to assess its performance. These datasets are all built upon Letters of Agreement which are Federal Aviation Administration (FAA) documents that formalize airspace operations across the national airspace system. The first two datasets are used for the adaptation of RoBERTa to the aviation domain and were of different sizes to assess the number of documents needed to adapt to the aviation domain. They contain many examples of ‘aviation English’ using domain specific terminology and phrasing which serves as a representative basis to perform the unsupervised adaptation. The second dataset is a separate set of LOA documents with two sets of classification labels to be used for evaluation; one at the document level and one at the line level. These down-stream evaluations allowed the measurement of improvement by adapting RoBERTa. The accuracy increased by 4-6% on both tasks and the F1 score on the class of interest increased by 4-8% from the adaptation.

Air Traffic Management↗
NASA NTRSDate not supplied

Development of an Inertial Sensor-based Methodology for Spacesuited Geology Task Assessments during Simulated Lunar Extravehicular Activities

Lunar surface exploration during Artemis missions will require the specific skill set of geology sampling. Apollo astronauts had extensive training and used specialized tools to collect lunar rocks, core samples, pebbles, sand, and dust. The inflexibility of the pressurized Apollo spacesuits forced sampling to be taken at a standstill posture. However, new exploration spacesuits are expected to incorporate advanced materials and joint bearings, allowing for greater mobility and a wider range of functional postures. Thus, science and exploration during Artemis missions will likely involve a variety of standing, squatting, and kneeling postures. In preparation for future lunar exploration missions, NASA provides geologic training to astronauts and other mission personnel. This professional training with a spacesuit in simulated lunar environments will enhance performance and reduce risk of injury to astronauts on the lunar surface. However, anecdotally, untrained or newly trained people wearing prototype planetary spacesuits have been observed to performing motions differently than a trained geologist would when conducting the same geology sampling tasks. Therefore, a tool for evaluating geology postures at extravehicular activity (EVA) training facilities becomes required. In this paper, we introduce a novel inertial measurement unit (IMU)-based method of geology task assessments in spacesuited conditions during simulated lunar EVAs. As a case study, two subjects (one geologist and one non-geologist) participated and donned the Mark III prototype planetary spacesuit during offloading with the spreader bar gimbal in NASA’s Active Response Gravity Offload System (ARGOS). For automated geology task assessments, the spacesuit was instrumented with three wireless IMUs (APDM Opal, OR, USA): one on the chest and one each on the left and right ankle bearings. Then subjects performed geology tasks using various tools (rake, trench, hammer chisel, scoop, and drive tube) for 45 minutes each. The chest IMU measured the torso tilt angle in the sagittal plane. We used an ensemble learning method with the ankle IMUs to discriminate between standing and kneeling activities. IMU data were processed using custom MATLAB (Mathworks, MA, USA) software. In our case study, the developed method was able to discriminate differences in standing and kneeling activity levels between subjects who were all highly experienced with spacesuited testing. Our preliminary data showed one subject maintained the constant and lower range of the upper body tilt angle while both standing and kneeling, while the other subject showed more variation of the upper body tilt angle and preferred bending the upper body rather than changing from standing to kneeling posture and vice versa. While geology experience may be a factor, these results need further investigation as suit sizing and ARGOS offloading configurations have been proven to have a significant influence on suited ARGOS tasks. Also, more subjects will be needed to complete these tasks for validation. IMU-based geology task assessments can provide useful information for geology training programs. Additionally, our IMU-based posture analysis can provide new insights into how to evaluate spacesuited geology task characteristics of astronauts during simulated lunar EVAs.

Kyoung Jae Kim↗
NASA NTRS1985

Planetary surface processes: A review

The Earth's surface was shaped by a variety of processes, including volcanism, tectonism, impact cratering, and gradation. Solar System exploration and geological mapping showed that these processes operate on all the terrestrial planets. Gradation is a complex process that begins with weathering and erosion, continues with transport of weathered debris, and ends with deposition. Gradation works through the agents of gravity, wind, and water, and can shed light on planetary surface evolution. Rates of surface erosion vary with planet and must be considered in assessing ages of surface units based on impact crater frequency distributions. The products of gradation may substantially influence remote sensing signatures for determination of composition and must be taken into account in interpreting such data.

Greeley, R.↗
NASA NTRS1984

Space Shuttle Main Engine overhaul program

The Space Shuttle Main Engine first flight set from the Orbiter Columbia was returned to Rockwell International/Rocketdyne Division in Canoga Park, California for overhaul after five successful development flights. The three main engines have been completely disassembled and the hardware assessed for space flight effects. Schedules to overhaul subsequent flight engines have been established based on operational requirements of the Space Transportation System. To support these requirements, a dedicated Space Shuttle Main Engine Overhaul Center is being built at the Canoga Park Rocketdyne Facility incorporating the latest in manufacturing, inspection, and data processing equipment.

Stohler, S.↗
NASA NTRS1989

Application of reusable software components at the SEI

Robert Holibaugh of the Software Engineering Institute described a project which is studying the application of reusable software components. The primary goals are to gain practical experience with state-of-the-art reusable components, methods, and tools and to capture the lessons learned in the application of reuse technology. In addition the project will assess the impact of reuse on the software development process and products and will identify and validate the information that facilities software reuse during system development. The project includes two tasks - a reuse experiment and a redevelopment effort. The reuse experiment will define a life cycle and a methodology for reuse-based development, and define and implement a data collection mechanism for measuring the development. The redevelopment effort will construct a reuse test bed and will redevelop and realistically test subsystems from an embedded mission-critical real-time application. The reuse experiment will produce several products including a tested real-time application, reuse-based components and tools evaluation, a reuse-based development method, a framework for data collection, a framework for measuring productivity, and lessons learned data. Successful development with reusable components will require a rich set of components and an integrating methodology. The Tomahawk Land Attack Missile system is the application for the redevelopment effort.

Holibaugh, Robert↗
NASA NTRS1990

Space Station Freedom Data Assessment Study

The SSF Data Assessment Study was initiated to identify payload and operations data requirements to be supported in the Space Station era. To initiate the study payload requirements from the projected SSF user community were obtained utilizing an electronic questionnaire. The results of the questionnaire were incorporated in a personal computer compatible database used for mission scheduling and end-to-end communications analyses. This paper discusses data flow paths and associated latencies, communications bottlenecks, resource needs versus availability, payload scheduling 'warning flags' and payload data loading requirements for each major milestone in the Space Station buildup sequence. This paper also presents the statistical and analytical assessments produced using the data base, an experiment scheduling program, and a Space Station unique end-to-end simulation model. The modeling concepts and simulation methodologies presented in this paper provide a foundation for forecasting communication requirements and identifying modeling tools to be used in the SSF Tactical Operations Planning (TOP) process.

Johnson, Anngienetta R.↗
NASA NTRS1993

Optimization of knowledge-based systems and expert system building tools

The objectives of the NASA-AMES Cooperative Agreement were to investigate, develop, and evaluate, via test cases, the system parameters and processing algorithms that constrain the overall performance of the Information Sciences Division's Artificial Intelligence Research Facility. Written reports covering various aspects of the grant were submitted to the co-investigators for the grant. Research studies concentrated on the field of artificial intelligence knowledge-based systems technology. Activities included the following areas: (1) AI training classes; (2) merging optical and digital processing; (3) science experiment remote coaching; (4) SSF data management system tests; (5) computer integrated documentation project; (6) conservation of design knowledge project; (7) project management calendar and reporting system; (8) automation and robotics technology assessment; (9) advanced computer architectures and operating systems; and (10) honors program.

Yasuda, Phyllis↗
NASA NTRS1995

Manufacturing waste disposal practices of the chemical propulsion industry

The waste production, mitigation and disposal practices of the United States chemical propulsion industry have been investigated, delineated, and comparatively assessed to the U.S. industrial base. Special emphasis has been placed on examination of ozone depleting chemicals (ODC's). The research examines present and anticipated future practices and problems encountered in the manufacture of solid and liquid propulsion systems. Information collected includes current environmental laws and regulations that guide the industry practices, processes in which ODC's are or have been used, quantities of waste produced, funding required to maintain environmentally compliant practices, and preventive efforts.

Goldberg, Benjamin E.↗
NASA NTRS2003

Martian Atmospheric Circulation and Climate

This proposal is focused on using Mars Global Surveyor (MGS) data and numerical models to address issues of atmospheric mixing of volatiles and aerosols, on defining the mean state of the atmosphere and the degree of variability, and on the processes which exchange volatiles and aerosols between the surface and atmosphere. Specifically, five areas of research were defined: In the first, we proposed to use TES data to examine the general circulation of the atmosphere both through retrieval of the residual circulation, and by comparison of the TES data with a Mars General Circulation Model (GCM). In the second, we proposed to look at synoptic and mesoscale atmospheric mixing processes (baroclinic storms, etc.) by combining TES and MOC Wide Angle data, and by employing a Mars Mesoscale Model. In the third section, we proposed to examine the record of the Martian atmospheric state provided by MGS, Viking, and Mariner 9 - as well as published ground-based observations - in order to assess the nature of interannual variability. In the forth section, we proposed to compare numerical models of the Martian water and dust cycles with TES and MOC data, specifically looking at water ice cloud distributions, dust distribution, etc. In the fifth section, we propose to use the mesoscale model to study the Mars Pathfinder Lander data. This work has now concluded its final of three years.

Ingersoll, Andrew P.↗
NASA NTRS2005

Lunar and Planetary Science XXXVI, Part 18

Topics discussed include: PoDS: A Powder Delivery System for Mars In-Situ Organic, Mineralogic and Isotopic Analysis Instruments Planetary Differentiation of Accreting Planetesimals with 26Al and 60Fe as the Heat Sources Ground-based Observation of Lunar Surface by Lunar VIS/NIR Spectral Imager Mt. Oikeyama Structure: First Impact Structure in Japan? Central Mounds in Martian Impact Craters: Assessment as Possible Perennial Permafrost Mounds (Pingos) A Further Analysis of Potential Photosynthetic Life on Mars New Insight into Valleys-Ocean Boundary on Mars Using 128 Pixels per Degree MOLA Data: Implication for Martian Ocean and Global Climate Change; Recursive Topography Based Surface Age Computations for Mars: New Insight into Surficial Processes That Influenced Craters Distribution as a Step Toward the Formal Proof of Martian Ocean Recession, Timing and Probability; Laser-induced Breakdown Spectroscopy: A New Method for Stand-Off Quantitative Analysis of Samples on Mars; Milk Spring Channels Provide Further Evidence of Oceanic, >1.7-km-Deep Late Devonian Alamo Crater, Southern Nevada; Exploration of Martian Polar Residual Caps from HEND/ODYSSEY Data; Outflow Channels Influencing Martian Climate: Global Circulation Model Simulations with Emplaced Water; Presence of Nonmethane Hydrocarbons on Pluto; Difference in Degree of Space Weathering on the Newborn Asteroid Karin; Circular Collapsed Features Related to the Chaotic Terrain Formation on Mars; A Search for Live (sup 244)Pu in Deep-Sea Sediments: Preliminary Results of Method Development; Some Peculiarities of Quartz, Biotite and Garnet Transformation in Conditions of Step-like Shock Compression of Crystal Slate; Error Analysis of Remotely-Acquired Mossbauer Spectra; Cloud Activity on Titan During the Cassini Mission; Solar Radiation Pressure and Transient Flows on Asteroid Surfaces; Landing Site Characteristics for Europa 1: Topography; and The Crop Circles of Europa.

Source record↗
NASA NTRS2009

Developing a Model-based Capability to Analyze Requirements for the Climate Observing System

Models are foundational for estimating states of the earth's climate system, both as tools to extrapolate information in time and space, and as observation 'operators' used to relate what is analyzed and predicted to what is observed. Expanding the simulation approach further, observing system simulation experiments (OSSEs) are designed to mimic the complete process of analyzing the climate state by replacing real observations with entirely simulated ones determined from a model-based depiction of nature. OSSEs provide a framework to 'fly' simulated satellite instruments through a synthetic atmosphere and investigate the trade-spaces of measurements for various satellite configurations and sampling strategies, and assess their measurement impact on modeling and forecasting capabilities. Such a tool is a crucial but as yet unfulfilled need for future mission selection and design. The components of a state-of-the-art OSSE system are being assembled at the Global Modeling and Assimilation Office (GMAO, Code 610.1) at NASA/GSFC, leveraging on the GMAO's existing modeling and data assimilation infrastructure for numerical weather prediction (NWP). The OSSE framework is based on the GMAO's Goddard Earth Observing System atmospheric general circulation model, version 5 (GEOS-5) and the Gridpoint Statistical Interpolation (GSI) observational analysis scheme, combined with the Goddard Chemistry, Aerosol, Radiation, and Transport (GOCART) model developed by the Atmospheric Chemistry and Dynamics Branch (Code 613.3). This system is an evolving, key component of Goddard's planned development of an Integrated Earth System Analysis (IESA) capability, which will bring together into a single, fully interactive system Goddard's modeling and assimilation efforts in atmosphere, ocean and chemistry and aerosols to provide a comprehensive analysis and prediction system for weather and climate In addition to providing a state-of-the-art capability for assimilating current observation types, GEOS-5, and the future IESA, provide the capability to identify the need for, and assess the potential impact of, future observing systems under consideration for improving weather and climate prediction.

Gelaro, Ronald↗
NASA NTRS2015

Fracture Toughness of Carbon Fiber Composites Containing Various Fiber Sizings and a Puncture Self-Healing Thermoplastic Matrix

Ongoing efforts at NASA Langley Research Center (LaRC) have resulted in the identification of several commercially available thermoplastic resin systems which self-heal after ballistic impact and through penetration. One of these resins, polybutylene graft copolymer (PBg), was selected as a matrix for processing with unsized carbon fibers to fabricate reinforced composites for further evaluation. During process development, data from thermo-physical analyses was utilized to determine a processing cycle to fabricate laminate panels, which were analyzed by photo microscopy and acid digestion. The process cycle was further optimized based on these results to fabricate panels for mechanical property characterization. The results of the processing development effort of this composite material, as well as the results of the mechanical property characterization, indicated that bonding between the fiber and PBg was not adequate. Therefore, three sizings were investigated in this work to assess their potential to improve fiber/matrix bonding compared to previously tested unsized IM7 fiber. Unidirectional prepreg was made at NASA LaRC from three sized carbon fibers and utilized to fabricate test coupons that were tested in double cantilever beam configurations to determine GIc fracture toughness.

Cano, Roberto J.↗