Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Perovskite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Carboxyl-functionalized perovskite enables ALD growth of a compact and uniform ion migration barrier

Mixed-halide wide-band-gap perovskites are critical components of highly efficient tandem cells, but their operating stability is limited by halide migration. Metal oxides deposited via atomic layer deposition (ALD) have been shown to block halide migration; however, previously pursued methods result in inhomogeneous nucleation and growth. We hypothesized that functionalizing the perovskite surface with ALD-active carboxyl groups could promote nucleation and enable higher-temperature metal oxide growth. We find that 5-ammonium valeric acid iodide (5-AVAI) facilitates the formation of a compact and uniform aluminum oxide (Al 2 O 3 ) layer and allows growth at 100°C compared with the previous limit of 75°C. We demonstrate that halide migration into the C 60 electron transport layer is reduced by a factor of 10 compared with the reference case. Finally, Al 2 O 3 -capped perovskite solar cells with a band gap of 1.78 eV retain 90% of their initial power conversion efficiency after 1,000 h of continuous operation under 1-sun illumination at 55°C.

Al2O3↗
DOE OSTI2026

Electrochemical Reactions Under Reverse Bias Create Additional Mobile Ions That Enable Hole Tunneling in Metal Halide Perovskite Diodes

Gradual reverse-bias breakdown in metal-halide perovskite diodes and solar cells is thought to originate from hole tunneling through steep bands in an ionic depletion region near the electron-transport layer after positively charged iodine vacancies accumulate near the hole-transport layer (HTL). However, typical reported mobile-ion concentrations near 1 x 10^17 cm-3 are too small to quantitatively explain significant tunneling-current densities and (Zener) breakdown observed near -5 V. Here, we show that inferred mobile-ion concentrations increase by more than 100x, to over 1 x 10^18cm-3 , within just 3 min of reverse bias at -6.0 V in p-i-n perovskite diodes. We attribute this increase to iodide oxidation and coupled iodine vacancy creation that must be balanced by reduction reactions near the HTL. Sub-optimal HTL coverage leads to direct contact between the transparent conducting electrode and perovskite, facilitates reduction events, enables the creation of even larger inferred mobile-ion concentrations (~1 x 10^19cm-3 ), and leads to faster degradation under reverse bias. This explains previous work that showed increased breakdown voltages and improved reverse-bias stability by implementing thick, uniform HTLs.

14 SOLAR ENERGY↗
DOE OSTI2023

Enhancing the performance of the perovskite solar cells by modifying the SnO 2 electron transport layer

The tin oxide (SnO 2 ) electron transport layer (ETL) plays a vital role in the photo-conversion efficiency (PCE) and stability of organic-inorganic perovskite solar cells (PSCs). However, SnO 2 ETL-induced defects such as hydroxyl groups, oxygen vacancies, exposed Sn atoms, and dangling bonds hinder device performance. In this study, rubidium chloride (RbCl) has been used to modify the SnO 2 ETL. Perovskite film formed on the RbCl-modified SnO 2 ETL exhibits improved crystallinity with enlarged grain size and reduced grain boundaries and enhanced optical absorption. Further, the Hall-effect measurements indicate the improved carrier mobility, and the dark J-V curve shows the increment of electrical conductivity for the RbCl-modified SnO 2 ETL. X-ray photoelectron spectroscopy (XPS) results demonstrate the surface defects passivation of the perovskite layer by modifying the SnO 2 ETL. A champion PCE of 19.35% has been achieved for the RbCl-modified SnO 2 ETL-based devices with improved stability, while the control devices with unmodified SnO 2 ETL show a PCE of 17.18%.

14 SOLAR ENERGY↗
DOE OSTI2023

Water additives improve the efficiency of violet perovskite light-emitting diodes

High external quantum efficiencies (EQEs) have been achieved for blue, green, red, and near-infrared perovskite light-emitting diodes (PeLEDs), and their energy efficiencies are approaching the efficiencies of III-V-based LEDs. Beyond the visible regime, ultraviolet light offers great promise for many applications such as disinfection. However, PeLEDs demonstrate poor performance in the violet/ultraviolet region, with reports of violet PeLED performance hindered by poor thin-film quality. In this work, we improve the uniformity of perovskite films by adding water into the precursor solution to engineer the crystallization process of spin-coated 2D perovskites. The resulting improved film uniformity, coupled with the reduction in nanoplate size, reduces leakage current and promotes faster recombination rates. The fabricated PeLEDs deliver bright violet emission at 408 nm with a maximum external quantum efficiency of 0.41%, a 5-fold increase over control devices. Furthermore, this work demonstrates viable steps toward cost-effective, efficient ultraviolet PeLEDs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Open-air spray deposition of PCBM/BCP electron transport layer for inverted perovskite solar cells

A [6,6]-phenyl C61 butyric acid methyl ester (PCBM) and bathocuproine (BCP) electron transport layer (ETL) is spray deposited in open air directly on top of a perovskite at linear speeds of 9 m/min. The PCBM precursor ink contains a binary mixture of 1:1 chlorobenzene:chloroform, which optimizes spray wettability on the perovskite surface and allows quick solvent evaporation. A near-infrared heating module additionally provides a flash cure (<5 s) for the formation of smooth, large-area PCBM films (∼20 cm 2 ). A BCP solution in isopropanol is subsequently sprayed to form an ultrathin (<5 nm) film and characterized with a suite of high-resolution metrologies. The spray-deposition processing and near-infrared treatment do not damage the underlying perovskite. Inverted architecture devices containing the sprayed ETL achieve a champion efficiency of 20.3% and demonstrate stable performance without additional interlayers or surface treatments. Here, the technoeconomic cost of the open-air spray process is compared against traditional vacuum-based evaporation, resulting in a decrease in manufacturing costs by 26%.

14 SOLAR ENERGY↗
DOE OSTI2023

A reversible perovskite air electrode for active and durable oxygen reduction and evolution reactions via the A-site entropy engineering

The performance of reversible solid oxide electrochemical cells (R-SOECs) is largely hindered by the insufficient electroactivity and poor durability of the bifunctional air electrodes, where the oxygen reduction and evolution reactions (ORR and OER) occur. Here, we report our findings in boosting the electrochemical activity and durability of an air electrode with Pr 0.2 Ba 0.2 Sr 0.2 La 0.2 Ca 0.2 CoO 3-δ (PBSLCC) via an A-site entropy engineering. The PBSLCC electrode shows enhanced oxygen reaction activity and excellent durability compared to binary and ternary double perovskites (PrBaCo 2 O 5+δ and Pr 0.8 Ba 0.8 Ca 0.4 Co 2 O 5+δ , respectively). A low and nearly unchanged area-specific resistance of 0.042Ωcm 2 is achieved at 750 °C during the 225-h stability test. La 0.9 Sr 0.1 Ga 0.8 Mg 0.2 O 3-δ electrolyte-supported cells with the PBSLCC air electrode show remarkable performance at 800 °C, demonstrating a peak power density of 1.2Wcm -2 in the fuel cell mode, and a current density of -1.1 Acm -2 at 1.3 V in the electrolysis mode while maintaining the excellent cycling durability of 228 h at ±0.5 Acm -2 under humidified H 2 (10% H 2 O). A bulk oxygen p-band center model is applied to verify that tailoring of the A-site entropy strongly influences the surface exchange coefficients (k* chem ), leading to higher oxygen reaction activity of PBSLCC than the binary and ternary perovskites. Finally, this study opens a new class of high-entropy perovskites for the rational design of air electrodes for R-SOECs with high activity and durability.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Chalcogenide perovskite BaZrS 3 thin-film electronic and optoelectronic devices by low temperature processing

Owing to its superior visible light absorption and high chemical stability, chalcogenide perovskite barium zirconium sulfide (BaZrS 3 ) has attracted significant attention in the past few years as a potential alternative to hybrid halide perovskites for optoelectronics. However, the high processing temperatures of BaZrS 3 thin films at above 1000 °C severely limits their potential for device applications. Herein, we report the synthesis of BaZrS 3 thin films at temperatures as low as 500 °C, by changing the chemical reaction pathway. The single phase BaZrS 3 thin film was confirmed by X-ray diffraction and Raman spectroscopy. Atomic force microscopy and scanning electron microscopy show that crystalline size and surface roughness were consistently reduced with decreasing annealing temperature. The lower temperatures further eliminate sulfur vacancies and carbon contaminations associated with high temperature processing. The ability to synthesize chalcogenide perovskite thin films at lower temperatures removes a major hurdle for their device fabrication. The photodetectors demonstrate fast response and an on/off ratio of 80. Finally, the fabricated field effect transistors show an ambipolar behavior with electron and hole mobilities of 16.8 cm 2 /Vs and 2.6 cm 2 /Vs, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tuning spin-orbit coupling towards enhancing photocurrent in hybrid organic-inorganic perovskites by using mixed organic cations

The presence of the heavy elements leads to strong spin-orbit coupling (SOC) in hybrid organic-inorganic perovskites (HOIPs), which plays an important role in the photovoltaic performance of HOIPs by changing the populations between bright and dark states. The organic cation is a critical composition and affects SOC via the interaction with the inorganic cage. In this work, we use magneto-photocurrent measurement to explore the SOC effect upon using mixed organic cations (methylammonium (MA) and formamidinium (FA)) with different dipole moments in Pb based perovskites. Magneto-photocurrent measurements showed that the internal magnetic parameter B0 is decreased from 402.41 mT to 180.18 mT and 104.58 mT with decreasing the MA/FA ratio. This provides evidence that changing the internal dipole moment by using mixed organic cations can essentially change the SOC in HOIPs. Simultaneously, the photocurrent is increased from 21.46 mA/cm 2 to 22.60 mA/cm 2 and 23.08 mA/cm 2 when the MA/FA ratio is changed from 1:0 to 0.9:0.1 and 0.7:0.3. Above all, our results indicate that the change in SOC by different organic cations can also be a factor affecting the performance of perovskite solar cells.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effects of potassium treatment on SnO 2 electron transport layers for improvements of perovskite solar cells

SnO 2 has been studied intensively as an electron transport layer (ETL) for highly efficient metal halide perovskite solar cells. However, SnO 2 ETL frequently exhibits defect-related issues associated with the bulk SnO 2 and the perovskite/SnO 2 interface, and to passivate the defect states potassium ion has been used. In order to investigate the passivation effect of potassium ion, we carried out KCl treatment on the solution-processed SnO 2 ETL. It was found that KCl-treatment shifted up conduction band maximum and Fermi energy of SnO 2 , and reduced the band gap of perovskite absorber by K + diffusion, which resulted in a better conduction band alignment at perovskite/SnO 2 . Admittance spectroscopy revealed that diffused K + ions can passivate defects of the perovskite absorber layer. With the improvement of band alignment and defect passivation via the KCl treatment, the J-V hysteresis was almost eliminated and power conversion efficiency was much enhanced with improved open-circuit voltage and fill factor.

14 SOLAR ENERGY↗
DOE OSTI2021

Radiation Stability of Mixed Tin-Lead Halide Perovskites: Implications for Space Applications

Mixed organic-inorganic halide perovskite solar cells (PSCs) have received considerable attention in recent years for their impressive solar to electrical power efficiency gains and potentially lower material and processing costs for optoelectronic applications. In addition to terrestrial applications, PSCs are of interest to the space power markets for their low cost, low weight, adaptability to flexible architectures, and tolerance to high energy particle irradiation (mainly protons and electrons). Here we investigate the properties of mixed formamidinium-methylammonium tin-lead iodide (FASn)0.6(MAPb)0.4I3 perovskites which lower the lead content as well as the bandgap, making them attractive for the low bandgap absorber material in tandem PSCs. Through current density-voltage (JV) characterization at lower temperatures, majority carrier transport is hindered and a barrier to photogenerated carrier extraction is evident. This is attributed to the thermally induced change of the bandgap of the absorber layer relative to the energy selective contacts in the device. We find that although the architecture used here hinders the performance at temperatures below 225 K, the tolerance to high energy (3.7 MeV) protons is impressive, considerably out-performing commercially available thin-film CIGS. These results suggest further improvements to structural and interface stability as well as lightweight encapsulation could lead to all perovskite flexible tandem arrays deployed for power generation on missions to low Earth orbit, the moon, Mars, and beyond.

perovskite solar cells↗
DOE OSTI2020

Digital alloy contact layers for perovskite solar cells

Thin film optoelectronic devices commonly require an individual material to perform multiple functions, but the physical properties of single-composition materials often cannot be tuned to optimize these diverse requirements. The electron selective contact layer in perovskite solar cells is a prime example. The material must simultaneously have optimal conduction band alignment, facilitate carrier extraction, prevent recombination, and provide a chemically stable interface with the notoriously volatile perovskite semiconductor. The pulse-by-pulse nature of the thin-film deposition method pulsed laser deposition (PLD) provides an opportunity to form material alloys where the chemical composition is controlled at the nanometer scale. These digital alloys may prove to be a powerful materials class to meet some of the multifunctional needs of thin film devices. Using PLD to make electron transport layers from ZnO and MgZnO targets, we demonstrate in this paper that digital alloy gradients can be tuned to significantly outperform either of the parent materials in perovskite solar cells.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Mitigating ion migration in perovskite solar cells

The intrinsic ion migration in the metal halide perovskite absorber layer and its interfaces seriously limits the device stability of perovskite solar cells (PSCs). Despite considerable efforts to mitigate the ion migration issue, it remains a formidable challenge in the commercialization of PSCs. In this paper, we provide a short review of the device failure mechanisms induced by intrinsic ion migration and discuss the detrimental effects of ion migration on different component layers of PSCs. We outline the corresponding strategies to mitigate ion migration in PSCs and provide an insight on materials engineering to attain long-term stabilized perovskite photovoltaics.

14 SOLAR ENERGY↗
DOE OSTI2021

Epitaxial Thin Films of a Chalcogenide Perovskite

Chalcogenide perovskites have emerged as a new class of optoelectronic materials, especially for photovoltaic applications, but fundamental properties and applications of chalcogenide perovskites remain limited due to the lack of high-quality thin films. In this paper, we report direct epitaxial thin film growth of BaZrS 3 , a prototypical chalcogenide, by pulsed laser deposition. X-ray diffraction studies show that the films are strongly textured out-of-plane and have a clear in-plane epitaxial relationship with the substrate. Electron microscopy studies confirm the presence of epitaxy for the first few layers of the film at the interface, even though away from the interface, the films are polycrystalline with many extended defects, suggesting the potential for further improvement in growth. X-ray reflectivity and atomic force microscopy show smooth film surfaces and interfaces between the substrate and the film. The films show strong light absorption near the band edge and photoluminescence in the visible region, validating BaZrS 3 as a suitable candidate for ultrathin front absorbers in tandem solar cells. The photodetector devices show fast and efficient photo response with the highest ON/OFF ratio reported for BaZrS 3 films thus far. Our study opens up opportunities to use high quality thin films of chalcogenide perovskites to probe fundamental physical phenomena in thin films and heterostructures and also in photovoltaic and optoelectronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Influence of Annealing and Composition on the Crystal Structure of Mixed-Halide, Ruddlesden–Popper Perovskites

Mixed-halide two-dimensional (2D) hybrid organic–inorganic perovskites offer an important opportunity to control the band gap for applications in optoelectronic devices. In this study, we focus on phenethylammonium lead halide [(PEA) 2 Pb(I 1– x Br x ) 4 ] films, the pure iodide form of which is one of the most widely studied optically active 2D perovskite systems. Resonant infrared, matrix-assisted pulsed laser evaporation is used to grow films to explore the effects of post-growth annealing and mixed-halide composition. The composition, crystal structure, and optical properties are studied for as-grown and annealed films of (PEA) 2 Pb(I 1– x Br x ) 4 for x = 0, 0.25, 0.5, 0.75, and 1. First-principles calculations are used in conjunction with the experimental data to explain the mixed-halide behavior that does not trend monotonically with the bromide content. Important results of this work are as follows: (i) X-ray diffraction reveals evidence for halide phase separation around x = 0.25, consistent with first-principles calculations, whereas no phase separation is observed for x = 0.5 and above and (ii) a unique photoluminescence (PL) peak splitting is observed for x = 0.75, a composition for which no compositional phase separation is observed. The PL splitting is tentatively explained by the coexistence of two distinct types of halide short-range ordering at x = 0.75. Overall, this study demonstrates that mixed-halide n = 1 Ruddlesden–Popper perovskites are not simple random alloys but that instead, they display distinct sites and ordering preferences of the different halide anions. These preferences are critical to understand and rationally tune the properties of the materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Isoconversional Kinetic Analysis of Oxygen Desorption for Sr 0.75 Ca 0.25 FeO 3-δ Perovskite in Dry and Steam-Based Environments

The desorption kinetics of Sr 0.75 Ca 0.25 FeO 3-δ perovskite material are examined in both dry and steam-based environments using redox gaseous products of a laboratory-scale fixed bed. First, desorption kinetics associated with the dry environment are proposed based on Friedman’s isoconversional method. It is found from the reconstructed reaction model that the desorption kinetics of this perovskite are controlled by a three-step mechanism, where hypothetically, the phase-boundary reaction rapidly prevails first, followed by diffusion and/or nucleation, and finally, unimolecular decay or random nucleation-controlled reaction. Subsequent analyses of the Arrhenius parameters indicated that both the early and later desorption stages, respectively, controlled by the phase boundary and unimolecular/random nucleation reactions, are associated with low energetic demand. In contrast, a high energetic penalty is required for the diffusion/nucleation reaction. Further, a satisfactory a priori verification of the proposed kinetics suggested that the three-step reaction mechanism reasonably describes the desorption of this perovskite in a dry environment. With the presence of steam in the desorption environment, oxygen production is substantially inhibited, but the hypothetical three-step mechanism is still found to control the desorption. Meanwhile, the primary effects of the steam on these mechanisms include the widening of the conversion extent associated with the diffusion/nucleation reaction, along with a higher energetic demand compared to the dry environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Crystal and Electronic Structures of A 2 NaIO 6 Periodate Double Perovskites (A = Sr, Ca, Ba): Candidate Wasteforms for I-129 Immobilization

The synthesis, structure, and thermal stability of the periodate double perovskites A 2 NaIO 6 (A= Ba, Sr, Ca) were investigated in the context of potential application for the immobilization of radioiodine. A combination of X-ray diffraction and neutron diffraction, Raman spectroscopy, and DFT simulations were applied to determine accurate crystal structures of these compounds and understand their relative stability. The compounds were found to exhibit rock-salt ordering of Na and I on the perovskite B-site; Ba 2 NaIO 6 was found to adopt the Fm- 3 m aristotype structure, whereas Sr 2 NaIO 6 and Ca 2 NaIO 6 adopt the P 2 1 / n hettotype structure, characterized by cooperative octahedral tilting. DFT simulations determined the Fm- 3 m and P 2 1 / n structures of Ba 2 NaIO 6 to be energetically degenerate at room temperature, whereas diffraction and spectroscopy data evidence only the presence of the Fm- 3 m phase at room temperature, which may imply an incipient phase transition for this compound. The periodate double perovskites were found to exhibit remarkable thermal stability, with Ba 2 NaIO 6 only decomposing above 1050 °C in air, which is apparently the highest recorded decomposition temperature so far recorded for any iodine bearing compound. As such, these compounds offer some potential for application in the immobilization of iodine-129, from nuclear fuel reprocessing, with an iodine incorporation rate of 25–40 wt%. The synthesis of these compounds, elaborated here, is also compatible with both current conventional and future advanced processes for iodine recovery from the dissolver off-gas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Shining Light on Halide Perovskites: Teaching Analytical Chemistry Using Flexible, Inquiry-Based Experiments

Two-dimensional (2D) metal halide perovskites are promising next generation semiconducting materials at the forefront of research in solar cells, LEDs, and other devices. Here, we report on an undergraduate intermediate analytical chemistry laboratory experience where students were taught fundamental chemistry concepts, including solubility, complexation, spectroscopy, and microscopy, through the introduction and study of 2D halide perovskite materials. Students explore multiple facets of perovskite synthesis, structure, and properties through a modular set of experiments that students used to form a holistic picture of this material. Importantly, this inquiry-based lab supports students through a guided research process, and students report high interest and learning gains from an end of the semester survey. We further discuss ways to adapt this lab to course, student, equipment, and budget needs. Overall, this laboratory experience teaches and applies the fundamental concepts and tools of analytical chemistry to the contemporary materials research field.

Analytical Chemistry↗
DOE OSTI2020

Stable Surface Terminations of a Perovskite Oxyhydride from First-Principles

Successful synthesis of some perovskite oxyhydrides and their unique catalytic properties have recently attracted researchers’ attention. However, their surface structure remains unclear. Here we identify stable surface terminations of a prototypical perovskite oxyhydride, BaTiO 2.5 H 0.5 , under catalytically relevant temperatures and pressures by using first-principles thermodynamics based on density functional theory. Five low-index facets, including (100), (010), (210), (011), and (211), and their various terminations for a total of 47 different surfaces have been examined for relative stability at different temperatures (700, 500, 300 K) and gas environments (10 –15 ≤ P O2 ≤ 1 atm, 10–15 ≤ PH2 ≤ 100 atm). The most stable ones are found to be (010)-Ba 2 O 2 , (210)-Ti 2 O 2 , and (211)-Ba 2 O 4 H surface terminations. These polar surfaces are stabilized by charge compensation. This work provides important insights into the stable surfaces of perovskite oxyhydrides for future studies of their catalytic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗