Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle shape”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Exploratory investigation on the use of low-cost alternative media for ultrafine grinding of coal

In this study, the energy efficiency of three alternative grinding media including, coarse silica beads, fine silica beads, and granular sand, were evaluated and compared against standard stainless steel. Stirred mill test results show that both silica beads and granular sand were more efficient than stainless steel in producing ultrafine particles following the order of coarse silica beads>granular sand>fine silica beads>stainless steel. The finest product size corresponding to a P 80 value of 2.33 μm was generated by coarse silica beads with a nominal size of 420×1190 μm, which also consumed the least amount of grinding energy. The specific energy input was reduced by almost 50% as opposed to that of stainless steel, while the operating work index was reduced by 87%. Overall, the test data indicate that grinding media density, media particle size and shape all play a role in determining the optimized grinding behavior of the coal material.

01 COAL, LIGNITE, AND PEAT↗

Lifetime measurements of 0 + states in Er 168 with the Doppler-shift attenuation method

Here, the lowest-lying shape oscillations of deformed nuclei have been described as quadrupole in nature (λ = 2), resulting in two types of vibrations or oscillations: β vibrations with oscillations along the symmetry axis (K π = 0 + ) and γ vibrations breaking axial symmetry with a projection of K π = 2 + on the symmetry axis. The γ vibration seems to be well characterized as the first K π = $2^+_1$ (or $2^+_γ$) band in deformed nuclei and exhibits a systematic behavior across the region. The nature of the K π = 0 + excitations, however, has remained poorly understood and has been open to debate for some decades. The goal of this work is to understand the nature of 0 + states observed in 168 Er through measurements of the lifetimes of these states and to determine if they are consistent with oscillations built on a deformed ground state, the minima of other coexisting shapes, single-particle states, or a mixture of effects. Lifetimes of excited states in the 168 Er nucleus were measured with the Doppler Shift Attenuation Method (DSAM) and the inelastic neutron scattering reaction, (n, n'γ), at the University of Kentucky Accelerator Laboratory. Numerous 0 + states had been observed by the (p, t) reaction. We confirm the 0 + states at 1217.2, 1421.5, 1833.6, 2364.9, 2392.1, and 2643.0 keV in 168 Er. We could not, however, support the previous assignments of 0 + levels at 2114.1, 2200.6, 2572.5, and 2617.4 keV. We report measured lifetimes for six confirmed 0 + excitations and additional members of 0 + bands. The results for 168 Er show that it is the third excited K π = 0 + ($0^+_4$) excitation that carries the collective strength and, therefore, the potential to be an oscillation on the ground state. This result is similar to the case in 166 Er, where it was also the $0^+_4$ state that exhibited greater collectivity than the first excited K π = 0 + band. The Delaroche et al. prediction for a collective K π = 0 + band is at E T =1.818 MeV which corresponds the third excited K π = 0 + band.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Tuning Stoichiometry to Promote Formation of Binary Colloidal Superlattices

The self-assembly of binary nanoparticle superlattices from colloidal mixtures is a promising method for the fabrication of complex colloidal cocrystal structures. However, binary mixtures often form amorphous or metastable phases instead of the thermodynamically stable phase. Here we show that in binary mixtures of differently sized spherical particles, an excess of the smaller component can promote—and, in some cases, may be necessary for—the self-assembly of a binary cocrystal. Using computer simulations, we identify two mechanisms responsible for this phenomenon. First, excess small particles act like plasticizers and enable systems to reach a greater supersaturation before kinetic arrest occurs. Second, they can disfavor competing structures that may interfere with the growth of the target structure. We find the phase behavior of simulated mixtures of nearly hard spheres closely matches published experimental results. We demonstrate the generality of our findings for mixtures of particles of arbitrary shape by presenting a binary mixture of hard shapes that only self-assembles with an excess of the smaller component.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulation of the shape of chaperonins using the small-angle x-ray scattering curves and torus form factor

The inverse scattering problem has been solved for protein complexes whose surfaces can be described by a set of the simplest doubly connected surfaces in the uniform approximation (a scattering potential inside the molecule is a constant). Solutions of two proteins-well-known GroEL bacterial chaperonin and poor-studied bacteriophage chaperonin, which is a product of 146 gene (gp146)-were taken for the experiment. The shapes of protein complexes have been efficiently reconstructed from the experimental scattering curves. The shell method, the method of the rotation of amino acid sequences with the use of the form factor of an amino acid, and the method of seeking the model parameters of a protein complex with the preliminarily obtained form factor of the model have been used to reconstruct the shape of these particles.

60 APPLIED LIFE SCIENCES↗

A Study of Iron Phthalocyanine Pyrolyzate with Mössbauer Spectroscopy and Transmission Electron Microscopy

A pyrolyzate of iron phthalocyanine is studied by Mössbauer spectroscopy and transmission electron microscopy. The phase composition and magnetic state were found for pyrolysis products (α-Fe, γ-Fe, Fe{sub 3}C, and magnetite). Morphological features of carbon and iron-containing phases (metal particles of various shapes and sizes, as well as carbon nanotubes, carbon hollow nanopolihedra, and nongraphitized carbon) are determined. The morphology and structure of iron phthalocyanine pyrolyzates and diphthalocyanines of rare-earth elements are analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

WalkThrough Example Procedures for MAMA

This documentation is a growing set of walk through examples of analyses using the MAMA V2.0 software. It does not cover all the features or possibilities with the MAMA software, but will address using many of the basic analysis tools to quantify particle size and shape in an image. This document will continue to evolve as additional procedures and examples are added. The starting assumption is that the MAMA software has been successfully installed.

97 MATHEMATICS AND COMPUTING↗

Final Report for DOE Grant # DE-FG02-01ER45893

During the period July 1, 2001 to June 30, 2016, the DOE-supported research project covered a significant number of research topics, all of them related to the study of magnetic materials. Part of this work was experimental but the main focus was on theoretical analyses of magnetic materials characterization approaches, such as Lorentz transmission electron microscopy (LTEM) using phase reconstructions; vector field electron tomography (VFET); and in-depth analyses of the demagnetization tensor field for uniformly magnetized particles of arbitrary shape. A total of 39 papers were published in peer-reviewed journals over the 16 years of this research program. In the following sub-sections, we list the abstracts for all 33 journal papers; the interested reader may find more details in the actual publications. Conference papers are also listed in the list of publications at the end of this report, but are not covered in the following sections due to the fact that these papers typically do not have an abstract.

36 MATERIALS SCIENCE↗

Physics Division Strategic Plan Fiscal Years 2020-2024

The vision of the Physics Division (PHY) at Argonne National Laboratory is to continue enhancing its role as a world-leading institution in basic nuclear physics research and its applications. Key to this vision is for PHY to continue to safely and effectively operate and evolve the capabilities of the Argonne Tandem Linac Accelerator System (ATLAS) facility to best serve its users. ATLAS is the Department of Energy (DOE) accelerator facility for low-energy nuclear physics research. The research carried out by PHY covers many themes in contemporary science but can be distilled into five areas of focus. These themes are interconnected, with continuously evolving synergies between the various groups and facilities in PHY and the broader Laboratory. This five-year strategic plan serves to illustrate our current capabilities and new directions related to these five areas of focus (ATLAS also develops an independent strategic plan): Accelerator research and design. The goal of this theme is to design, fabricate, test, and implement novel accelerator systems, with a focus on high-intensity ion and electron systems. These R&D activities have led to enhancements in the ATLAS accelerator system. Among others, the division’s accelerator systems are in use or planned for use at Fermilab, the Advanced Photon Source, and in a broad variety of applications at the Facility for Rare Isotope Beams (FRIB). Atom trapping and fundamental symmetries. The goal of this theme is to explore and exploit the uses of advanced laser cooling and trapping techniques to manipulate atoms. There are three main areas of focus. First is in the application of the atom trap trace analysis (ATTA) technique for age determination of groundwater and ice by using radio-krypton dating. The next two trapping-based programs involve tests of fundamental symmetries in nature: the cooling and trapping of radium-225 with the aim of determining limits on an observation of its electric dipole moment and precision measurements of the beta decay properties of helium-6 to set limits on the tensor coupling constant. This is complemented by measurements of similar properties in lithium-8 and boron-8. Nuclear astrophysics. The goal of this theme is to enhance our understanding of how elements are created in the universe via explosive nucleosynthesis and how stars evolve. To meet the challenges of this theme, many of the capabilities of ATLAS are being enhanced, including the development of new beams through a new in-flight separator (RAISOR) and the anticipated neutron-generator upgrade of the Californium Rare Isotope Breeder Upgrade facility (nuCARIBU). These are coupled to state-of-the-art instruments such as the Canadian Penning Trap, Helical Orbit Spectrometer, Gammasphere, GRETINA, Multi-Sampling Ionization Chamber, the Fragment Mass Analyzer, and Argonne Gas-filled Fragment Analyzer, and a new low-background experimental area for decay studies. Nuclear structure. The goal of this theme is to understand the structure of nuclei, both stable and radioactive, in terms of single-particle properties, their shapes, and the dynamics governing reactions between them. These include questions such as what are the limits of nuclear stability and what are the properties of super heavy nuclei. As with the nuclear astrophysics theme, the capabilities of ATLAS, guided by the ATLAS user community, are continuously being enhanced to this end. The Division has strategic initiatives to play a leading role in the development of instrumentation and research programs at the FRIB. Quantum chromodynamics (QCD) and hadron physics. The goal of this theme is to lead major research programs focused on revealing the quark and gluon structure of protons, neutrons, nuclei, and short-lived mesons and baryons. These involve major programs at Jefferson Lab, Fermilab, and smaller facilities. They are complemented by theoretical endeavors centered on the question of how hadrons and their properties emerge from QCD. Out of these activities arise strategic initiatives to play a major role in the forthcoming Electron-Ion Collider (EIC).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Characterization of Orography-Influenced Riming and Secondary Ice Production and Their Effects on Precipitation Rates Using Radar Polarimetry and Doppler Spectra (CORSIPP-SAIL)

The Characterization of Orography-Influenced Riming and Secondary Ice Production and Their Effects on Precipitation Rates Using Radar Polarimetry and Doppler Spectra (CORSIPP) project was conducted to help improve the understanding of precipitation formation in orographically influenced terrain. Special focus is put on the two processes of riming and secondary ice production and their external drivers. Two instruments, a polarimetric W-band simultaneous transmission simultaneous reception (STSR) Doppler cloud radar manufactured by Radiometer Physics GmbH (RPG, instrument type RPG-FMCW-94-DP), from now on named LIMRAD94, and the video in situ snowfall sensor (VISSS), were deployed at the U. S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s Surface Atmosphere Integrated Field Laboratory (SAIL) site in Gothic, Colorado between November 2022 and June 2023 during the second SAIL winter. Note that the exact dates of data availability differ between the instruments. Both instruments arrived at Gothic on November 2, 2022, 09:20 local time. VISSS, described by Maahn et al., is equipped with two camera systems with telecentric lenses. The two cameras are at a 90° angle to each other. This configuration allows for size-independent measurements by capturing images of hydrometeors from two sides at a high frame rate of 250 Hz. With a minimum detection size of 200 μm, VISSS provides valuable insights into particle size, number, shape, complexity, and fall velocity. The VISSS was deployed on the grassland next to the ARM facility with the amazing help of the ARM employees on site. The setup started on November 2, 2022, and was finished on November 5, 2022, without major problems. VISSS measurements were started on November 6, 2022. LIMRAD94 was installed on a scaffolding platform near Orehouse (Gothic) on November 9, 2022, with the great help of RMBL staff. LIMRAD94 was mounted on a cold temperature scanner prototype. After a short test of the setup on November 9, 2022, the digital control of the scanner elevation stopped working for (at that time) unknown reasons. All attempts to resolve the problem failed. This malfunction made it impossible to operate LIMRAD94 in scanning mode. The scanner was then manually moved to zenith pointing mode and between November 10 and November 15, 2022, vertical observations for polarimetric calibration were performed. On November 15, 2022, after the polarimetric calibration was applied, the scanner was manually moved to 40° elevation with azimuthal view towards the Ka-band ARM Zenith Radar (KAZR) and measurements were continued at constant elevation. Investigation of the scanner malfunction on February 6, 2023, by Benn Schmatz revealed a disengagement between the cogwheel of the elevation motor and the cogwheel moving the scanner in elevation. This mechanical issue was temporarily solved by re-engaging the cogwheels. This made the scanner operational again for about four weeks, until mechanical force disengaged the cogwheels again on March 15, 2023. This repeated scanner failure remained undetected for about three weeks until April 8, 2023; during this time the scanner was stuck at 72° elevation. However, the radar software continued to produce data files falsely indicating that the scanner was still operational. After the scanner failure was noticed, scanning was stopped again, and we returned to constant elevation measurements. On May 15, 2023, the cogwheels of the elevation motor were secured with additional screws sent by the manufacturer. At some point in May, the cogwheels of the azimuth motor were also disengaged by mechanical force, which still allowed for range height indicator (RHI) but no plan position indicator (PPI) scans in the last weeks of the campaign. The azimuth motor was repaired in Germany after the end of the campaign. Throughout the campaign, RMBL and ARM staff kept the radar and the VISSS free of snow.

54 ENVIRONMENTAL SCIENCES↗

Grinding and Pelleting Characteristics of Municipal Solid Waste Fractions

The efficient utilization of low-cost carbon feedstocks, such as municipal solid waste (MSW), in biorefineries has become increasingly important for reducing GHG emissions and meeting the growing demand for renewable energy sources. However, MSW as a feedstock presents several challenges, including high moisture content, compositional variability, particle size and shape, density, and ash content. To address these challenges, the potential of mechanical dewatering and high-moisture pelleting processes for densifying MSW fractions, such as paper, cardboard, thin plastic, and thick plastic, into low-cost carbon feedstocks with improved handling and conversion properties were investigated. The effect of these preprocessing technologies on the critical quality attributes (CQAs) of the resulting pellets, including bulk density, durability, and size uniformity, were evaluated. The results showed that with these preprocessing technologies, the paper and cardboard fractions could be pelleted at moisture contents over 40% (w.b.) while achieving >99% durability and >300 kg/m3, while the high moisture plastic fractions were not suitable for pelleting. The thick plastic fraction processed in a screw press was shown to remove up to 30% of the moisture content in a single pass. These findings suggest that these mechanical preprocessing technologies can improve the physical properties of low-cost municipal solid waste fractions for biofuels production.

09 BIOMASS FUELS↗

Moving the Plasmon of LaB 6 from IR to Near-IR via Eu-Doping

Lanthanum hexaboride (LaB 6 ) has become a material of intense interest in recent years due to its low work function, thermal stability and intriguing optical properties. LaB 6 is also a semiconductor plasmonic material with the ability to support strong plasmon modes. Some of these modes uniquely stretch into the infrared, allowing the material to absorb around 1000 nm, which is of great interest to the window industry. It is well known that the plasmon of LaB 6 can be tuned by controlling particle size and shape. In this work, we explore the options available to further tune the optical properties by describing how metal vacancies and Eu doping concentrations are additional knobs for tuning the absorbance from the near-IR to far-IR in La 1-x Eu x B 6 (x = 0, 0.2, 0.5, 0.8, and 1.0). We also report that there is a direct correlation between Eu concentration and metal vacancies within the Eu 1-x La x B 6 .

36 MATERIALS SCIENCE↗

Mass and density of individual frozen hydrometeors

A new precipitation sensor, the Differential Emissivity Imaging Disdrometer (DEID), is used to provide the first continuous measurements of the mass, diameter, and density of individual hydrometeors. The DEID consists of an infrared camera pointed at a heated aluminum plate. It exploits the contrasting thermal emissivity of water and metal to determine individual particle mass by assuming that energy is conserved during the transfer of heat from the plate to the particle during evaporation. Particle density is determined from a combination of particle mass and morphology. A Multi-Angle Snowflake Camera (MASC) was deployed alongside the DEID to provide refined imagery of particle size and shape. Broad consistency is found between derived mass–diameter and density–diameter relationships and those obtained in prior studies. However, DEID measurements show a generally weaker dependence with size for hydrometeor density and a stronger dependence for aggregate snowflake mass.

47 OTHER INSTRUMENTATION↗

Laser-assisted additive manufacturing

Laser additive manufacturing apparatus, systems, and methods for the fabrication of high quality freeform high value structures. The apparatus, systems, and methods utilize a material powder having varying particle size and shape as raw material. It can also be adopted to use a wire as the feed material.

36 MATERIALS SCIENCE↗

Catalysts, catalyst supports and methods of making the same

The present disclosure relates to a composition that includes a core in the shape of a particle having a characteristic length between about one micron and about one millimeter, an active material that includes a noble metal deposited on a surface of the core, and a coating that includes a first metal-oxide, where the active material is positioned between the core and the coating, the active material has a diameter between about one nanometer and about 20 nanometers, and the coating has a thickness between greater than zero nanometers and about 20 nanometers.

Vardon, Derek Richard↗

Laser-assisted additive manufacturing

Laser additive manufacturing apparatus, systems, and methods for the fabrication of high quality freeform high value structures. The apparatus, systems, and methods utilize a material powder having varying particle size and shape as raw material. It can also be adopted to use a wire as the feed material.

Demos, Stavros G.↗

Time at Temperature Abstract and Intern Poster

Current NRC regulations for BWR operations dictate that any occurrence reaching the point of Departure from Nucleate Boiling (DNB) disqualifies the use of the fuel rod for further reactor operation. That criteria does not account for duration of rate of the power increase, the corresponding effects on material properties or rewetting that may occur. Previous Anticipated Operational Occurrences (AOOs) show short durations power increase that may require limited amounts of heat removal. Industrial experience has shown evidence that fuel can reach dryout yet continue to safely operate in regular reactor conditions. The gap in research into such occurrences is the motivation for a series of experiments, including this current work. Time-at-Temperature experiments aim to identify and characterize the microstructural changes in Zircaloy-2 under oxygen-free high temperatures. This work uses the FlashDSC instrument to rapidly ramp up and down the temperature of a focus ion beam (FIB) prepared large area lift-out (LALO) of Zircaloy-2 at a rate of 10,000 K/s to desired values. The focus is to characterize the microstructure evolution, if any, of Zircaloy-2 that may impact its performance under typical BWR conditions. This characterization includes analyzing grain structure and size, secondary phase particle (SPPs) size, shape, composition, and location using Transmission Electron Microscopy (TEM). Further data collection and analysis is in progress including diffraction pattern indexing and 4D STEM processing. While current results focus on the testing and characterizing unirradiated material, future plans include expansion to irradiated material to explore the effects of rapid transition rates seen in DNB and dryout conditions on irradiationg damage and defect annealing.

36 - MATERIALS SCIENCE↗

High-Energy X-ray Tomographic Analysis of Precursor Metal Powders (Ti-6Al-4V) Used for Additive Manufacturing

We utilized high-energy x-ray tomography to characterize Ti-6Al-4V metal powders (both as-received and recycled) used in powder-bed additive manufacturing process. The image processing workflow was developed to process and analyze large amount of data objectively by computer program. The distribution of size and shape of the metal particles as well as defect (mainly porosity) inside the particles was analyzed with the statistical representation and resolution in micrometer. The result revealed that circular-shaped porosity with various sizes could be embedded in the powder particles. These porosities could potentially be transferred to the 3D printed part and critically affect the mechanical performance of the component. The present study shows the effectiveness of characterizing metal powders using x-ray imaging techniques where sufficient number of particles can be sampled within tens of minutes with a minimum sample preparation and high accuracy. Clear structural differences in the as-received and recycled powders were delineated that helps in determining the feasibility of using the recycled powders.

36 MATERIALS SCIENCE↗

A numerical method for fully resolved simulation (FRS) of rigid particle-flow interactions in complex flows

A fictitious-domain based formulation for fully resolved simulations of arbitrary shaped, freely moving rigid particles in unsteady flows is presented. The entire fluid-particle domain is assumed to be an incompressible, but variable density, fluid. The numerical method is based on a finite-volume approach on a co-located, Cartesian grid together with a fractional step method for variable density, low-Mach number flows. The flow inside the fluid region is constrained to be divergence-free for an incompressible fluid, whereas the flow inside the particle domain is constrained to undergo rigid body motion. In this approach, the rigid body motion constraint is imposed by avoiding the explicit calculation of distributed Lagrange multipliers and is based upon the formulation developed by Patankar [N. Patankar, A formulation for fast computations of rigid particulate flows, Center for Turbulence Research Annual Research Briefs 2001 (2001) 185-196]. The rigidity constraint is imposed and the rigid body motion (translation and rotational velocity fields) is obtained directly in the context of a two-stage fractional step scheme. The numerical approach is applied to both imposed particle motion and fluid-particle interaction problems involving freely moving particles. Grid and time-step convergence studies are performed to evaluate the accuracy of the approach. Finally, simulation of rigid particles in a decaying isotropic turbulent flow is performed to study the feasibility of simulations of particle-laden turbulent flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗