Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Waves generated in the vicinity of an argon plasma gun in the ionosphere

Wave and particle observations were made in the close vicinity of an argon plasma gun carned to over 600 km altitude on a sounding rocket. The gun was carned on a subpayload, separated from the main payload early in the flight. Twelve-second argon ion ejections were energized alternately with a peak energy of 100 or 200 eV. They produced waves, with multiple harmonics, in the range of ion cyclotron waves, 10 to 1000 Hz at rocket altitudes. Many of these waves could not be identified as corresponding to the cyclotron frequencies of any of the ions, argon or ambient, known to be present. In addition, the wave frequencies were observed to rise and fall and to change abruptly during a 12-s gun operation. The wave amplitudes, near a few hundred Hertz, were of the order of O. 1 V/m. Some of the waves may be ion-ion hybrid waves. Changes in ion populations were observed at the main payload and at the subpayload during gun operations. A gun-related, field-aligned, electron population also appeared.

Cahill, L. J., Jr.↗
NASA NTRS1973

Energetic particles as a source of flare energy

The production of solar flares by the reservoir of energy generated by sunspot magnetic fields is discussed. Electrons play an important part in the flare process since high energy electrons are responsible for X-ray and radio emission. The energy required in the form of protons trapped in sunspot magnetic fields to produce large solar flares is analyzed. A trigger mechanism is described where the particles can be rapidly dumped into the chromosphere when fast electrons are produced by Coulomb collisions and through pion production by the highest energy protons.

Elliot, H.↗
NASA NTRS1991

Randomization of particle motions and the observed morphology of cometary heads

A great diversity is known to exist in the coma morphology of comets. In particular, some comets show much structural detail in their heads (such as jets, halos, fans, plumes, streamers), while others have completely structureless comas. Obvious questions arise as to why is this so and what does the presence or absence of features tell us about the emission processes on cometary nuclei. In an effort to investigate these problems, a computer code that generates synthetic images of dust comets was modified by introducing random perturbations into motions of ejected particles. It is noted that the introduction of perturbations has made the computer generated images simulate the appearance of comets quite faithfully and that by increasing the perturbations beyond a certain limit it has been possible to erase the coma morphology diagnostic of the details of the ejection process. It is proposed that the degree of collimation of an ejecta flow from discrete active sources on the nucleus surface and possible emissions of dust coma. Molecules of comet gases that radiate in the spectral region employed (and whose velocity distribution is much more chaotic than that of dust particles) and limited atmospheric seeing likewise contribute to blurring structural detail in ground-based imaging observation of comets. The absence of discrete features in the coma does no means imply the absence of localized sources of activity on the nucleus.

Sekanina, Zdenek↗
NASA NTRS1991

Evaluation of an efficient statistical transport model for turbulent droplet dispersion in dilute combusting sprays

Evaluation of an efficient statistical transport model for turbulent droplet dispersion is made for a dilute spray of methanol droplets injected into a turbulent, axisymmnetric methane-fuelled diffusion flame burning in stagnant air. In the dispersion model, a computational parcel representing a group of physical particles (droplets) is considered to have a normal probability density function (pdf) in space. The mean is determined by Lagrangian tracking through a sequence of stochastically generated turbulent eddies and the variance is evaluated from a statistical formulation based on the linearized particle equations of motion. The basic validity of this model is established through comparison with available experimental data and with theoretical predictions using a conventional stochastic direct modeling approach. The conclusion of the evaluation is that the proposed dispersion model compares favorably with experimental data and provides a valid technique for simulating turbulent combusting sprays with significant computational savings over conventional methods.

Litchford, Ron J.↗
NASA NTRSDate not supplied

Measuring the Wear and Abrasive Resistance of Air Plasma Sprayed Aluminum Oxide for Lunar Exploration

Lunar regolith, especially finer dust particles traveling at high velocities, can cause significant wear and abrasive damage to structural components that ensure a prolongated presence on the surface of the Moon. With the absence of an atmosphere and lower gravity than on Earth, regolith particles maintain high velocities at large distances from where they were generated, for example next to lunar landers. Wear-resistant ceramic and ceramic composite materials can improve the durability of spacecraft components during long missions on the Moon’s surface. Aluminum oxide coatings are lightweight, have multifunctional properties, and have high strength including high hardness and wear resistance. These properties can help improve the durability of structures used in space exploration. Air plasma sprayed (APS) aluminum oxide coatings have demonstrated the potential to protect critical structures. This study investigated the abrasive wear resistance of APS aluminum oxide coatings via Taber abrasion experiments. Taber abrasion offers the advantage of quantifying the abrasive wear behavior of particles with different shapes on a surface. In this work, an abrasive wheel made of silicon carbide was utilized to evaluate wear properties of specimens progressively over 5000 cycles. This experiment focused on testing two series of specimens to determine whether a bond coat composed of nickel, chromium, aluminum, and yttrium (NiCrAlY) improved the protective behavior of the APS aluminum oxide coating. The specimens varied in topcoat thickness and were made with and without an approximately 100 µm bond coat layer. The mass of the specimens was measured at 400 cycles, 800 cycles, 3800 cycles, and 5000 cycles. Increasing thickness was found to result in higher wear for samples with and without a bond coat. Increased mass loss in samples with a bond coat was observed indicating a need for further studies on the overall impact of the use of a bond coat on the protective behavior of the coatings. To continue designing wear resistant coatings for structural protection in space missions, the multifunctional properties of the APS aluminum oxide coating will be studied. Future experiments will determine whether the APS aluminum oxide coating can protect the structures from other aspects of the harsh space environment, such as extreme temperature variations and ionizing radiation.

aluminum oxide↗
NASA NTRS1975

Installation for the study of the angular distribution of cosmic muons with super-high energies at large zenith angles

An installation consisting of an ionization calorimeter and a counter hodoscope can be used to record cascade showers caused by the electromagnetic interactions of muons with superhigh energies in the cosmic ray horizontal flux. The direction of the muons is determined by a hodoscope consisting of 2196 counters. The information obtained makes it possible to restore the angular and energy distribution of the cosmic muons, which, in turn, makes it possible to determine the mechanism of their generation. The accuracy with which the angle of the passing particle is determined is discussed in detail in addition to the causes which can introduce distortions, such as shower accompaniment of neutrons, escape of shower electrons from the calorimeter, random coincidences, etc.

Borog, V. V.↗
NASA NTRS1974

Suprathermal particles

Recent observations of suprathermal particles in the interplanetary medium in the energy range from solar wind (above about 1 keV) to low energy solar cosmic rays (about 1 MeV) are reviewed. A crude classification of the types of observed fluxes is given, and the sources of the suprathermal particle populations and energy contained in them are discussed. Among the possible interactions of these particles with the solar wind plasma, the particular interaction which generates type III solar radio bursts is analyzed.

Lin, R. P.↗
NASA NTRS1976

Stratospheric aerosols and climatic change

Generated primarily by volcanic explosions, a layer of submicron silicate particles and particles made of concentrated sulfuric acids solution is present in the stratosphere. Flights through the stratosphere may be a future source of stratospheric aerosols, since the effluent from supersonic transports contains sulfurous gases (which will be converted to H2SO4) while the exhaust from Space Shuttles contains tiny aluminum oxide particles. Global heat balance calculations have shown that the stratospheric aerosols have made important contributions to some climatic changes. In the present paper, accurate radiative transfer calculations of the globally-averaged surface temperature (T) are carried out to estimate the sensitivity of the climate to changes in the number of stratospheric aerosols. The results obtained for a specified model atmosphere, including a vertical profile of the aerosols, indicate that the climate is unlikely to be affected by supersonic transports and Space Shuttles, during the next decades.

Baldwin, B.↗
NASA NTRS1983

A study of the surface deterioration due to erosion

It is pointed out that materials exposed to particle impacts are eroded and subjected to deterioration of their surface quality. In the case of turbomachinery, this surface deterioration can lead to a significant decrease in engine performance. Tabakoff and Balan (1981) have conducted experiments on the erosion related performance changes in two-dimensional airfoil cascades. It was found that the increase in surface roughness associated with erosion is a major factor in the performance decrease of the cascades. Attention is given to experiments which were conducted on 6061 T6 flat plate aluminum specimens. A series of experiments were carried out in an erosion wind tunnel using a collimated beam of particles. In agreement with existing theories and experiments, erosion ripple generation was observed for the angles of attack up to 60 degrees.

Tabakoff, W.↗
NASA NTRS1984

Experimental determination of single-event upset (SEU) as a function of collected charge in bipolar integrated circuits

Single-Event Upset (SEU) in bipolar integrated circuits (ICs) is caused by charge collection from ion tracks in various regions of a bipolar transistor. This paper presents experimental data which have been obtained wherein the range-energy characteristics of heavy ions (Br) have been utilized to determine the cross section for soft-error generation as a function of charge collected from single-particle tracks which penetrate a bipolar static RAM. The results of this work provide a basis for the experimental verification of circuit-simulation SEU modeling in bipolar ICs.

Zoutendyk, J. A.↗
NASA NTRS1985

The galactic cosmic ray intensity minimum in the inner and outer heliosphere in solar cycle 21

The occurrence of the cosmic ray intensity minimum during solar cycle 21 at widely separated locations in the heliosphere is investigated. The data include in situ measurements by cosmic-ray detectors on the earth-orbiting satellite IMP 8, on the Voyagers 1 and 2 spacecraft, and on the Pioneers 10 and 11 spacecraft, located at distances from 1 to 27 AU. It is noted that Pioneer 10 and the other three spacecraft (Pioneer 11 and Voyagers 1 and 2) are on the opposite sides of the sun, with the latter moving toward the tail of the heliosphere. The data used in the study have been suitably corrected by removing solar flare particle contributions, Forbush decreases, and contamination by the radioisotope thermoelectric generator. It is evident that there exists a time delay in the occurrence of the cosmic ray intensity minimum registered by the IMP 8 and Pioneer 10 detectors, the latter being located at approximately 27 AU. It is shown that the data from the four spacecraft in deep space are on an average consistent with the IMP 8 data at 1 AU when suitably corrected, using 3 percent/AU for the radial gradient and 500 km/s for the average speed of propagation. An overview of the intensity profiles reveals reasonable agreement among them. However, specific intensity features appear at times to propagate with speeds in excess of the average value of about 500 km/s.

Venkatesan, D.↗
NASA NTRS1986

Space station contamination considerations

The external induced environment generated by space station activity, or more specifically by gases, particles, and light background is discussed. These contaminant species must be controlled if sensitive systems, such as solar energy collectors or science experiments exposed to the external environment are to function properly. The requirements generally set limits on the level of gas species, matter deposited on surfaces and light background levels over various spectral regions. They also address environment monitoring and contamination controls during manufacturing. Limits on effluent release and system leakages are in turn derived from these requirements.

Leger, L.↗
NASA NTRS1990

The photochemistry of methane in the atmosphere of Triton

The model of Summers and Strobel (1989) for photochemical reactions in the Uranus atmosphere was modified and used for quantitative calculations of methane in the atmosphere of Triton. The principal adjustable parameters in the new model are the surface CH4 concentrations and the vigor of vertical mixing in Triton's lower atmosphere. It is shown the rate of methane photolysis that was calculated is sufficient to generate a smog of condensed C2H2, C2H4, C2H6, and C4H2 particles in the lowest 30 km of Triton's atmosphere, with an optical depth consistent with the Voyager imaging results.

Strobel, Darrell F.↗
NASA NTRS1992

Physics issues associated with low-beta plasma generators

Kinetic aspects of MHD generators are explored by examining the propagation of dense, low-beta streams of plasma. Three situations are considered: the basic principles of plasma-stream propagation, the propagation of plasma streams into vacuum, and the propagation of plasma streams into ambient plasmas. These three situations are analogous to plasma generators, plasma generators with vacuum loads, and plasma generators with plasma loads. Kinetic (microphysics) aspects include oscillations of the generator plasma, the effects of diocotron instabilities, the acceleration of particles, the starvation of current systems, and plasma-wave production.

Borovsky, Joseph E.↗
NASA NTRS2004

Non-Ballistic Vapor-Driven Ejecta

Impact-induced vaporization is a key component of early-time cratering mechanics. Previous experimental [1,2] and computational [e.g., 3] studies focused on the generation and expansion of vapor clouds in an attempt to better understand vaporization in hypervelocity impacts. Presented here is a new experimental approach to the study of impact-induced vaporization. The three-dimensional particle image velocimetry (3D PIV) system captures interactions between expanding vapor phases and fine particulates. Particles ejected early in the cratering process may be entrained in expanding gas phases generated at impact, altering their otherwise ballistic path of flight. 3D PIV allows identifying the presence of such non-ballistic ejecta from very early times in the cratering process.

Wrobel, K. E.↗