Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POISONING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Alcohol Oxidation at Platinum–Gas and Platinum–Liquid Interfaces: The Effect of Platinum Nanoparticle Size, Water Coadsorption, and Alcohol Concentration

Platinum nanoparticles size range from 1 to 8 nm deposited on mesoporous silica MCF-17 catalyzed alcohol oxidations were studied in the gas and liquid phases. Among methanol, ethanol, 2- propanol and 2-butanol reactions, the turnover frequency increased with Pt nanoparticle size for all the alcohols utilized. The activation energies for the oxidations were almost same among all alcohol species, but higher in the gas phase than those in the liquid phase. Water coadsorption poisoned the reaction in the gas phase, while it increased the reaction turnover rates in the liquid phase. Sum frequency generation (SFG) vibrational spectroscopy studies and DFT calculations revealed that the alcohol molecules pack horizontally on the metal surface in low concentrations and stand up in high concentrations, which affect the dissociation of β-hydrogen of the alcohols as the critical step in alcohol oxidations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface Structure Dependence of the Dry Dehydrogenation of Alcohols on Cu(111) and Cu(110)

The non-oxidative dehydrogenation of alcohols is considered as an important method to produce aldehydes for the chemical industry and hydrogen gas. However, current industrial processes are oxidative, meaning that the aldehydes are formed along with water, which, in addition to being less energy efficient, poses separation problems. Herein the production of aldehydes from methanol and ethanol on clean and dry Cu(111) and Cu(110) surfaces was investigated in order to understand the catalytic anhydrous dehydrogenation of alcohols. We report both ethanol and methanol preferentially react under ultrahigh vacuum conditions at surface defects to yield acetaldehyde and formaldehyde, respectively, in the absence of surface oxygen and water. The amount of alkoxide reaction intermediates measured by scanning tunneling microscopy, and aldehyde and hydrogen products detected by temperature programmed reaction, are increased by inducing more defects in the Cu substrates with Ar ion sputtering. This work also reveals that the Cu model surfaces are not poisoned by the reaction and exhibit 100% selectivity for alcohol dehydrogenation to aldehyde and hydrogen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Acetylene and Ethylene Adsorption on a β-Mo 2 C(100) Surface: A Periodic DFT Study on the Role of C- and Mo-Terminations for Bonding and Hydrogenation Reactions

Mo 2 C catalysts are widely used in hydrogenation reactions; however, the role of the C and Mo terminations in these catalysts is not clear. Understanding the binding of adsorbates is key for explaining the activity of Mo 2 C. The adsorption of acetylene and ethylene, probe molecules representing alkynes and olefins, respectively, was studied in this paper on a β-Mo 2 C(100) surface with C and Mo terminations using calculations based on periodic density functional theory. Moreover, the role of the C/Mo molar ratio was investigated to compare the catalytic potential of cubic (δ-MoC) and orthorhombic (β-Mo 2 C) surfaces. The geometry and electronic properties of the clean δ-MoC(001) and β-Mo 2 C(100) surfaces have a strong influence on the binding of unsaturated hydrocarbons. The adsorption of ethylene is weaker than that of acetylene on the surfaces of the cubic and orthorhombic systems; adsorption of the hydrocarbons was stronger on β-Mo 2 C(100) than on δ-MoC(001). The C termination in β-Mo 2 C(100) actively participates in both acetylene and ethylene adsorption and is not merely a spectator. Finally, the results of this work suggest that the β-Mo 2 C(100)-C surface could be the one responsible for the catalytic activity during the hydrogenation of unsaturated C≡C and C=C bonds, while the Mo-terminated surface could be poisoned or transformed by the strong adsorption of C and CH x fragments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical Insights into Methane C–H Bond Activation on Alkaline Metal Oxides

Here, we investigate the role of alkaline metal oxides (AMO) (MgO, CaO, and SrO) in activating the C–H bond in methane. We also use Density Functional Theory (DFT) and microkinetic modeling to study the catalytic elementary steps in breaking the C–H bond in methane and creating the methyl radical, a precursor prior to creating C2 products. We also study the effects of surface geometry on the catalytic activity of AMO by examining terrace and step sites. We observe that the process of activating methane depends strongly on the structure of the AMO. When the AMO surface is doped with an alkali metal, the transition state (TS) structure has a methyl radical-like behavior, where the methyl radical interacts weakly with the AMO surface. In this case, the TS energy scales with the hydrogen binding energy. On pure AMO, the TS interacts with AMO surface oxygen as well as the metal atom on the surface, and consequently the TS energy scales with the binding energy of hydrogen and methyl. We study the activity of AMO using a mean-field microkinetic model. The results indicate that terrace sites have similar catalytic activity, with the exception of MgO(100). Step sites bind hydrogen more strongly, making them more active, and this confirms previously reported experimental results. We map the catalytic activity of AMO using a volcano plot with two descriptors: the methyl and the hydrogen binding energies, with the latter being a more significant descriptor. The microkinetic model results suggest that C–H bond dissociation is not always the rate-limiting step. At weak hydrogen binding, the reaction is limited by C–H bond activation. At strong hydrogen binding, the reaction is limited due to poisoning of the active site. We found an increase in activity of AMO as the basicity increased. Finally, the developed microkinetic model allows screening for improved catalysts using simple calculations of the hydrogen binding energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Graphene-Directed Formation of a Nitrogen-Doped Porous Carbon Sheet with High Catalytic Performance for the Oxygen Reduction Reaction

In this paper, a nitrogen (N)-doped porous carbon sheet is prepared by in situ polymerization of pyrrole on both sides of graphene oxide, following which the polypyrrole layers are then transformed to the N-doped porous carbon layers during the following carbonization, and a sandwich structure is formed. Such a sheet-like structure possesses a high specific surface area and, more importantly, guarantees the sufficient utilization of the N-doping active porous sites. The internal graphene layer acts as an excellent electron pathway, and meanwhile, the external thin and porous carbon layer helps to decrease the ion diffusion resistance during electrochemical reactions. As a result, this sandwich structure exhibits prominent catalytic activity toward the oxygen reduction reaction in alkaline media, as evidenced by a more positive onset potential, a larger diffusion-limited current, better durability and poison-tolerance than commercial Pt/C. Finally, this study shows a novel method of using graphene to template the traditional porous carbon into a two-dimensional, thin, and porous carbon sheet, which greatly increases the specific surface area and boosts the utilization of inner active sites with suppressed mass diffusion resistance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning Methane Activation Chemistry on Alkaline Earth Metal Oxides by Doping

Here, we study oxidative coupling of methane (OCM) on alkaline earth metal oxides (AEMOs) doped with either a transition metal (TM) or an alkaline earth metal (AEM) different from that of the host oxide. We assess whether doping can lead to new materials that are better than the pure oxides or deviate from the limitations of the scaling relations. Density functional theory (DFT) calculations show that doped AEMO surfaces follow similar linear scaling relations as observed on pure AEMO; however, doped surfaces bind the adsorbates, hydrogen, and methyl more strongly. Both TM- and AEM-doped AEMOs show that methane activation mostly occurs through a surface-mediated pathway, where at the transition state the methane C–H bond is stretched, and the methyl interacts mostly with the dopant atom and the hydrogen with the lattice oxygen. The stronger hydrogen binding in the doped surfaces leads to a lower methane activation barrier; however, in some cases, the catalyst surface binds the hydrogen too strongly, poisoning the active site and making the catalyst inactive. The doped systems are largely constrained by the scaling relations, but sites closer to the optimum of the volcano plot exist, suggesting room for improvement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An In Situ Surface-Enhanced Infrared Absorption Spectroscopy Study of Electrochemical CO 2 Reduction: Selectivity Dependence on Surface C-Bound and O-Bound Reaction Intermediates

The CO2 electroreduction reaction (CO2RR) is a promising avenue to convert greenhouse gases into high-value fuels and chemicals, in addition to being an attractive method for storing intermittent renewable energy. Although polycrystalline Cu surfaces have long been known to be unique in their capabilities of catalyzing the conversion of CO2 to higher-order C1 and C2 fuels, such as hydrocarbons (CH4, C2H4, etc.) and alcohols (CH3OH, C2H5OH), product selectivity remains a challenge. Rational design of more selective catalysts would greatly benefit from a mechanistic understanding of the complex, multiproton, and multielectron conversion of CO2. In this study, we select three metal catalysts (Pt, Au, Cu) and apply in situ surface enhanced infrared absorption spectroscopy (SEIRAS) and ambient-pressure X-ray photoelectron spectroscopy (APXPS), coupled to density-functional theory (DFT) calculations, to get insight into the reaction pathway for the CO2RR. We present a comprehensive reaction mechanism for the CO2RR and show that the preferential reaction pathway can be rationalized in terms of metal–carbon (M–C) and metal–oxygen (M–O) affinity. We show that the final products are determined by the configuration of the initial intermediates, C-bound and O-bound, which can be obtained from CO2 and (H)CO3, respectively. C1 hydrocarbons are produced via OCH3,ad intermediates obtained from O-bound CO3,ad and require a catalyst with relatively high affinity for O-bound intermediates. Additionally, C2 hydrocarbon formation is suggested to result from the C–C coupling between C-bound COad and (H)COad, which requires an optimal affinity for the C-bound species, so that (H)COad can be further reduced without poisoning the catalyst surface. It is suggested that the formation of C1 alcohols (CH3OH) is the most challenging process to optimize, as stabilization of the O-bound species would both accelerate the formation of key intermediates (OCH3,ad) but also simultaneously inhibit their desorption from the catalyst surface. Our findings pave the way toward a design strategy for CO2RR catalysts with improved selectivity, based on the experimental/theoretical reaction mechanisms that have been identified. These results also suggest that designing the electronic structure of the catalyst is not the sole determining factor to achieve highly selective CO2RR catalysis; rather, tuning additional experimental reaction conditions such as electrolyte–intermediate interactions also become critical.

Katayama, Yu↗

Constructing a Tandem Mass Spectral Library for Forensic Ricin Identification

Ricin, a protein found in castor seeds, is a lethal toxin that is designated as a category 2 select agent. Because castor seeds are easy to obtain and the toxin can be easily extracted, cases of attempted ricin poisoning are relatively common. A shotgun proteomics method for ricin identification has recently been developed (manuscript in preparation), in which ricin peptides are identified by liquid chromatography-tandem mass spectrometry (LC-MS/MS) followed by proteomics database search, and peptide-spectrum matches are verified and compared to standard spectra by a human expert. To make this process more reproducible, objective, and high-throughput, we have created a ricin spectral library for peptide identification to supplement the human review step. To construct these spectral libraries, two pure ricin samples (from a proposed standard reference material) and crude castor seed extracts were digested with trypsin and analyzed using a standard shotgun LC-MS/MS protocol. Spectral libraries were created from the filtered search results from four database search tools. The library was then used in a search using SpectraST on samples from castor seeds. Analysis showed that the spectral library search resulted in more peptides identified from crude castor seed samples compared to MS-GF+ and Sequest plus Percolator. These results suggest that computational comparison of putative ricin peptide spectra to library spectra can be an effective method of confirming the presence of ricin, and that spectral library search may be suitable to augment the more manual and subjective aspects of the currently recommended human expert review.

Spectral Library, Ricin, forensic, proteomic↗

High-Performance Pt–Co Nanoframes for Fuel-Cell Electrocatalysis

Pt-based alloy catalysts are promising candidates for fuel-cell applications, especially for cathodic oxygen reduction reaction (ORR) and anodic methanol oxidation reaction (MOR). The rational design of composition and morphology is crucial to promoting catalytic performances. Here, we report the synthesis of Pt–Co nanoframes via chemical etching of Co from solid rhombic dodecahedra. The obtained Pt–Co nanoframes exhibit excellent ORR mass activity in acidic electrolyte, which is as high as 0.40 A mg Pt –1 initially and 0.34 A mg Pt –1 after 10 000 potential cycles at 0.95 V RHE . Furthermore, their MOR mass activity in alkaline media is up to 4.28 A mg Pt –1 and is 4-fold higher than that of commercial Pt/C catalyst. Furthermore, experimental studies indicate that the weakened binding of intermediate carbonaceous poison contributes to the enhanced MOR behavior. More impressively, the Pt–Co nanoframes also demonstrate remarkable stability under long-term testing, which could be attributed to the negligible electrochemical Co dissolution.

25 ENERGY STORAGE↗

Exploring the Alcohol Stability of Bis(phosphine) Cobalt Dialkyl Precatalysts in Asymmetric Alkene Hydrogenation

Here, cobalt complexes bearing enantiopure, bidentate bis(phosphine) ligands exhibit extraordinary activity and stereoselectivity for the hydrogenation of enamides. Optimal performance was observed in polar protic solvents such as methanol, an industrially preferred green solvent but a medium that is often a poison for reduced Earth abundant metals. The interaction of the low spin cobalt(II) dialkyl complex, ( R,R )-( i Pr-DuPhos)Co(CH 2 SiMe 3 ) 2 with alcohols including: 4-methoxyphenol, pinacol, and CH 3 OH was studied. With the alcohols lacking beta-hydrogens, cobalt bis(alkoxide) complexes were isolated and structurally characterized. With methanol, protonolysis of the alkyl ligands was again observed followed by dehydrogenation of the alcohol and [( R,R )-( i Pr-DuPhos)Co] 2 (mu-CO) 2 was isolated. Both solid-state and solution EXAFS studies were conducted to establish the spectroscopic signatures of bis(phosphine)cobalt(II) and cobalt(0) complexes relevant to catalytic hydrogenation and also to probe the role of phosphine dissociation in methanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Air-Stable Calcium Cyanamide-Supported Ruthenium Catalyst for Ammonia Synthesis and Decomposition

Efficient ammonia synthesis and decomposition processes under mild conditions are important to meet the expanding demand in major applications of ammonia as the energy carrier and to provide feedstock for chemical industry. In this study, we report that air-stable calcium cyanamide-supported ruthenium (Ru/CaCN 2 ) works as an efficient and stable catalyst for ammonia synthesis and decomposition. Ru/CaCN 2 exhibits greater catalytic performances for both reactions than Ru/Ca 2 N electride and Ru–Cs/MgO. The kinetic analysis for ammonia synthesis suggests that Ru/CaCN 2 exhibits low apparent activation energy and high resistance to hydrogen poisoning, which has characteristics similar to the kinetic parameters of Ru-supported electride catalyst. H 2 -temperature programmed reaction and temperature programmed desorption revealed that Ru promoted the formation of CN 2 vacancies on the CaCN 2 surface which in turn capture hydrogen as H – ions during the reaction. Density functional theory calculations provide insights into how the formation of CN 2 vacancies is promoted by Ru, which leads to the decrease in the work function of the CaCN 2 surface and the hydrogen capture at the Ru-support interface. These results suggest that the high catalytic performance of Ru/CaCN 2 can be attributed to the formation of a quasi-electride structure at the Ru–CaCN 2 interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assessment of Protective Coatings for Metal-Supported Solid Oxide Electrolysis Cells

Green hydrogen is essential to achieving carbon neutrality, and solid oxide electrolysis cells can produce hydrogen using renewable power and waste heat. Insufficient long-term durability of solid oxide electrolysis cells has impeded their commercialization. Here, coatings in the porous stainless steel support of metal-supported solid oxide electrolysis cells (MS-SOECs) are used to dramatically improve their performance and durability. The long-term degradation rate of uncoated MS-SOECs is highly dependent on the current density, with the fastest degradation occurring at the highest current density tested, 0.5 A cm -2 . At this current density, coatings are quite effective. Three protective coatings, Co 3 O 4 deposited by atomic layer deposition (ALD), Co 3 O 4 deposited by electroplating deposition (ED), and CuMn 1.8 O 4 (CMO) deposited by electrophoretic deposition (EPD), are explored to enhance the performance of MS-SOECs with La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 -Sm 0.2 Ce 0.8 O 3 (LSCF-SDC) as the oxygen catalyst and SDC-Ni as the fuel catalyst. The initial average current density at 1.4 V is increased with coatings. It is 0.83 mA cm -2 for the ALD cells, 1.05 mA cm -2 for the ED cells, and 1.13 mA cm -2 for the EPD cells, compared to 0.65 mA cm -2 for the bare cells at 700 °C with 50% H 2 -50% H 2 O. The degradation rate over 1000 h of continuous operation is reduced from 36% to 26%, 27%, and 19% kh -1 with the three coatings, respectively. Furthermore, these improvements are ascribed to reduced Cr poisoning on the oxygen catalyst, which is one of the primary degradation modes for this type of MS-SOEC.

25 ENERGY STORAGE↗

Effect of Surface Ligands on CoP for the Hydrogen Evolution Reaction

The activity of colloidally synthesized CoP for the hydrogen evolution reaction (HER) was studied to determine the impact of surface ligand on catalysis. The as-synthesized CoP nanocrystals were stripped with trialkyloxonium tetrafluoroborate (Meerwein’s reagent) to create a “blank template” that was then religated with carboxylates (oleate, octanoate, acetate) and amines (oleylamine, octylamine, dioctylamine, trioctylamine butylamine). Carboxylates and amines were chosen due to their prevalence in colloidal syntheses, and the range of ligands was chosen to study the impact of sterics and hydrophobicity of the surface ligands on catalysis. Long chain carboxylates were found to result in a larger increase in overpotential when compared to the equivalent amine (e.g., oleate vs oleylamine), due to higher ligand density and stronger coordination with carboxylates. Increased carbon chain length resulted in increased overpotential with carboxylates; however, the range of 1° amines studied had similar overpotentials. This is due to the lower ligand density and therefore sparse ligand packing for the 1° amines. These results suggest that the mechanism by which surface ligands impede catalysis on CoP for HER is primarily through inhibiting substrate access to surface active sites rather than poisoning the active sites.

cobalt phosphide, hydrogen evolution reaction, lig↗

Graphitized Mesoporous Engineered Carbon Support for Fuel Cell Applications

As proton exchange membrane fuel cells mature into commercial devices capable of powering a wide range of stationary and automotive applications, they need materials with tunable properties to improve their performance and durability. Carbon supports used for platinum (Pt) nanoparticle dispersion is typically based on a furnace black-type material with a random structure, thereby hindering progress in catalyst development. To address this challenge, engineered carbons with a tunable mesoporous structure offer an opportunity to maximize catalyst performance and durability. In this article, we report on the development of a graphitized, mesoporous carbon support with a high degree of ordering, labeled here as ECS4005, for the dispersion of Pt nanoparticles. Pt/ECS4005 shows significantly improved kinetic activity due to its mesoporous structure that mitigates Pt poisoning by sulfonate functional groups in the ionomer while simultaneously enabling favorable accessibility to reactants.

25 ENERGY STORAGE↗

Improved Rate for the Oxygen Reduction Reaction in a Sulfuric Acid Electrolyte using a Pt(111) Surface Modified with Melamine

The feasible commercialization of alkaline, phosphoric acid and polymer electrolyte membrane fuel cells depends on the development of oxygen reduction reaction (ORR) electrocatalysts with improved activity, stability, and selectivity. The rational design of surfaces to ensure these improved ORR catalytic requirements relies on the so-called "descriptors" (e.g., the role of covalent and noncovalent interactions on platinum surface active sites for ORR). Here, we demonstrate that through the molecular adsorption of melamine onto the Pt(111) surface [Pt(111)-M ad ], the activity can be improved by a factor of 20 compared to bare Pt(111) for the ORR in a strongly adsorbing sulfuric acid solution. Additionally, the M ad moieties act as "surface-blocking bodies," selectively hindering the adsorption of (bi)sulfate anions (well-known poisoning spectator of the Pt(111) active sites) while the ORR is unhindered. This modified surface is further demonstrated to exhibit improved chemical stability relative to Pt(111) patterned with cyanide species (CN ad ), previously shown by our group to have a similar ORR activity increase compared to bare Pt(111) in a sulfuric acid electrolyte, with Pt(111)-M ad retaining a greater than ninefold higher ORR activity relative to bare Pt(111) after extensive potential cycling as compared to a greater than threefold higher activity retained on a CN ad -covered Pt(111) surface. We suggest that the higher stability of the Pt(111)-M ad interface stems from melamine's ability to form intermolecular hydrogen bonds, which effectively turns the melamine molecules into larger macromolecular entities with multiple anchoring sites and thus more difficult to remove.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Significant Role of Oxygen Dopants in Photocatalytic PFCA Degradation over h-BN

The activation of the C(sp 3 )–F bond is extremely difficult due to its unreactive nature. The importance of this bond activation is recently highlighted because extensive distribution of perfluorocarboxylic acids (PFCAs) (C n F 2n+1 COOH) has emerged as a challenging environmental issue. Photocatalytic degradation of PFCAs over a few semiconducting light absorbers is known to remove these water and soil resilient contaminants but with limited efficiency. This work reports density functional theory calculations, through which we present a detailed mechanistic study of photocatalytic degradation of CF 3 COOH (the shortest member of the PFCA family) over hexagonal boron nitride (h-BN). Here, our results clearly demonstrate that the existence of point defects is necessary to activate the h-BN plane for photocatalytic dissociation of the C–F bond. Specifically, we show that vacancies create strong Lewis acid or base sites (B or N vacancy, respectively) that facilitate the activation of the C(sp 3 )–F bond considerably. Furthermore, this study presents vivid theoretical evidence for the significant role of oxygen dopants, which mitigate the strength of the active sites and promote PFCA degradation over h-BN. Our calculations suggest that while the very stable intermediates generated during the reaction, in the case of h-BN with B or N vacancies, practically poison the catalyst, oxygen dopants make the degradation much more plausible and controllable. This work thus provides both an explanation for recently observed photocatalytic activity of h-BN to decompose PFCAs and valuable insights for exploring defected two-dimensional materials for activating and removing the fluorine-containing contaminants from water and soil.

54 ENVIRONMENTAL SCIENCES↗

Yttrium-based Double Perovskite Nanorods for Electrocatalysis

In this work, we investigate the effect of chemical composition of double perovskite nanorods on their versatile electrocatalytic activity not only as supports for the oxidation of small organic molecules but also as catalysts for the oxygen evolution reaction. Specifically, Y 2 CoMnO 6 and Y 2 NiMnO 6 nanorods with average diameters of 300 nm were prepared by a two-step hydrothermal method, in which the individual effects of synthetic parameters, such as the pH, annealing temperature, and precursor ratios on both the composition and morphology, were systematically investigated. When used as supports for Pt nanoparticles, Y 2 CoMnO 6 /Pt catalysts exhibited an electrocatalytic activity for the methanol oxidation reaction, which is 2.1 and 1.3 times higher than that measured for commercial Pt/C and Y 2 NiMnO 6 /Pt. Similarly, the Co-based catalyst support material displayed an ethanol oxidation activity, which is 2.3 times higher than both Pt/C and Y 2 NiMnO 6 /Pt. This clear enhancement in the activity for Y 2 CoMnO 6 can largely be attributed to strong metal-support interactions, as evidenced by a downshift in the binding energy of the Pt 4f bands, measured by XPS, which is often correlated not only with a downshift in the d-band center but also to a decreased adsorption of poisoning adsorbates. Moreover, when used as catalysts for the oxygen evolution reaction, Y 2 CoMnO 6 displayed a much greater activity as compared with Y 2 NiMnO 6 . This behavior can largely be attributed not only to a preponderance of comparatively more favorable oxidation states and electronic configurations but also to the formation of an active layer on the surface of the Y 2 CoMnO 6 catalyst, which collectively give rise to improved performance metrics and greater stability as compared with both IrO 2 and Y 2 NiMnO 6 . Overall, these results highlight the importance of both the chemical composition and the electronic structure of double perovskites, especially when utilized in multi-functional roles as either supports or catalysts.

30 DIRECT ENERGY CONVERSION↗

Alkyl-Cyclens as Effective Sulfur- and Phosphorus-Free Friction Modifiers for Boundary Lubrication

Modern automotive engines operate at higher power densities than ever before, driving a need for new lubricant additives capable of reducing friction and wear further than ever before while not poisoning the catalytic converter. Reported in this paper is a new class of molecular friction modifier (FM), represented by 1,4,7,10-tetradodecyl-1,4,7,10-tetraazacyclododecane (1a), designed to employ thermally stable, sulfur- and phosphorus-free alkyl-substituted nitrogen heterocycles with multiple nitrogen centers per molecule. The multiple nitrogen centers enable cooperative binding to a surface which provides strong surface adsorption and lubricant film durability in the boundary lubrication (BL) regime. A 1 wt % loading of the cyclen FM 1a in Group III base oil exhibits strong surface adsorption, leading to excellent reductions in friction (70%) and wear (95%) versus the pure Group III oil across a wide temperature range. The lubricant with the new FM additive also outperforms two commercially available noncyclic amine-based FMs and a fully formulated commercial 5W30 motor oil.

Desanker, Michael↗