Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA DRIFT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

CME stimulated by eruptive prominence

A model of CME arising due to drift motion in the corona in the presence of an eruptive prominence is presented. Magnetic field configuration is in accordance with a model of inverse polarity. In a region where a magnetic pressure of the filament magnetic field is greater than a gas pressure, plasma motion can be assumed as a drift motion. Its characteristic is such that the further one gets from the filament, the higher is drift velocity of a plasma. That sort of motion leads to a rarefaction of plasma and formation of a cavity around the filament. But a current strength in eruptive prominences estimated from observations is such that the region b is less than 1 has a limited size. Near the boundary b = 1 plasma deceleration is occurred and as a result of it coronal density is increasing. Plasma condensation near the surface b = 1 leads to formation of a dense envelope which can be collated with an outer loop of CME. Two dimensional numerical MHD simulation displays a process of cavity and loop formation. If a current is large enough, two compact regions of compressed dense matter arise at both sides of the rising filament and two narrow jets are developed. This scenario, perhaps, corresponds to CMEs in which a top of the loop is faint or it is absent at all.

Filippov, B. P.↗

Instrument for differential on flux vector measurements on Spacelab 2

The DIF (differential ion flux) probe used on the Spacelab-2 mission as part of the PDP (plasma diagnostic package) as well as the DIF design, operational characteristics and data reduction procedures required to obtain plasma properties are described. The basic principles, the sensor head design, and the electronics design are discussed. Plasma properties such as ion drift energy and temperature, ion flow direction, and ion flux density are explained, and in addition, calibration procedures and calibration data on detection of multiple ion streams and detection of ion streams superimposed on an isotropic plasma are analyzed. Finally, the mounting and role of the DIF probe on the PDP are briefly reviewed. Schematics of the instrument and of its control logic are included.

Stone, N. H.↗

Potential structure around the Cassini spacecraft near the orbit of Enceladus

We present the results of numerical simulations of the potential structure around an object in a streaming plasma with parameters relevant for the Cassini spacecraft passing through Saturn's plasma disk near the orbit of Enceladus. Two- and three-dimensional particle-in-cell codes have been used allowing the potential of the simulated spacecraft body to develop self-consistently through the collection of charge by its surface. The dependence of the density and potential profiles on ambient plasma density, electron temperature, and ion drift speed is discussed. The spacecraft floating potential values, found in the simulations, are compared to those deduced from the analysis of Cassini Langmuir probe characteristics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nighttime sporadic-E.

At night, internal atmospheric gravity waves are able to induce drift instabilities in the ionospheric plasma. Nighttime constant height type sporadic-E(Esc) may then be explained as an effect due to the combined effect of ionization movement due to the wind shear mechanism and due to the cross-field gradient drifts. This combined concept provides a qualitative explanation of the rocket observed nighttime electron density profiles, of the speeds of the Esc irregularities and of the variations of Esc with latitude and electric field strength.-

Beer, T.↗

Nonlinear modeling of the scaling law for the m/n = 3/2 error field penetration threshold

The scaling law for the m/n=3/2 error field (EF) penetration threshold is predicted numerically based on nonlinear single-fluid and two-fluid modeling using the TM1 code. The simulated penetration threshold of radial magnetic field b r at the plasma edge is scaled to the electron density n e , temperature T e , viscous time τ μ , toroidal field B t and the natural frequency ω in the form of b r /B t ∝n e αn T e αT τ μ αμ B t αB ω αω by scanning these parameters separately. Here, α n , α T , α μ , α B and α ω are the scaling coefficients on n e , T e , τ μ , B t and ω, respectively. Single-fluid modeling shows that the 3/2 EF threshold scales as b r /B t ∝n e 0.56 T e 0.6 τ μ -0.59 B t -1.15 ω, which is similar with the analytical scaling law in both the Rutherford and visco-resistive regimes. Yet, two-fluid modeling shows that the scaling law differs significantly in particular regarding the dependence on plasma rotation. In detail, the scaling coefficient α n on density decreases from 0.67 to 0.56 and α T on temperature decreases from 0.67 to 0.32, while α μ on viscous time is around -0.45 and α B on toroidal field decreases slightly from -1.15 to -1, when the ratio |ω E /ω *e | between plasma rotation frequency ω E and diamagnetic drift frequency ω *e varies from 0 to 10. Scans of the plasma rotation reveals that the penetration threshold linearly depends on the perpendicular rotation frequency (or natural frequency) ω ⊥e =ω E +ω *e , and there is a minimum in the required field amplitude when ω ⊥e 0. In addition, the enduring mystery of non-zero penetration threshold at zero plasma natural frequency in EF experiments is resolved by two-fluid simulations. We report that the very small island and smooth bifurcation in EF penetration near zero frequency is hard to detect in the experiment, leading to a finite penetration threshold within the capability of the experimental measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Progress from ASDEX Upgrade experiments in preparing the physics basis of ITER operation and DEMO scenario development

An overview of recent results obtained at the tokamak ASDEX Upgrade (AUG) is given. A work flow for predictive profile modelling of AUG discharges was established which is able to reproduce experimental H-mode plasma profiles based on engineering parameters only. In the plasma center, theoretical predictions on plasma current redistribution by a dynamo effect were confirmed experimentally. For core transport, the stabilizing effect of fast ion distributions on turbulent transport is shown to be important to explain the core isotope effect and improves the description of hollow low-Z impurity profiles. The L–H power threshold of hydrogen plasmas is not affected by small helium admixtures and it increases continuously from the deuterium to the hydrogen level when the hydrogen concentration is raised from 0 to 100%. One focus of recent campaigns was the search for a fusion relevant integrated plasma scenario without large edge localised modes (ELMs). Results from six different ELM-free confinement regimes are compared with respect to reactor relevance: ELM suppression by magnetic perturbation coils could be attributed to toroidally asymmetric turbulent fluctuations in the vicinity of the separatrix. Stable improved confinement mode plasma phases with a detached inner divertor were obtained using a feedback control of the plasma β. The enhanced D α H-mode regime was extended to higher heating power by feedback controlled radiative cooling with argon. The quasi-coherent exhaust regime was developed into an integrated scenario at high heating power and energy confinement, with a detached divertor and without large ELMs. Small ELMs close to the separatrix lead to peeling-ballooning stability and quasi continuous power exhaust. Helium beam density fluctuation measurements confirm that transport close to the separatrix is important to achieve the different ELM-free regimes. Based on separatrix plasma parameters and interchange-drift-Alfvén turbulence, an analytic model was derived that reproduces the experimentally found important operational boundaries of the density limit and between L- and H-mode confinement. Feedback control for the X-point radiator (XPR) position was established as an important element for divertor detachment control. Stable and detached ELM-free phases with H-mode confinement quality were obtained when the XPR was moved 10 cm above the X-point. Investigations of the plasma in the future flexible snow-flake divertor of AUG by means of first SOLPS-ITER simulations with drifts activated predict beneficial detachment properties and the activation of an additional strike point by the drifts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MARS-F/K modeling of plasma response and fast ion losses due to RMP in KSTAR

Abstract The toroidal single-fluid magnetohydrodynamic (MHD) code MARS-F (Liu et al 2000 Phys. Plasmas 7 3681) and the MHD-kinetic hybrid code MARS-K (Liu et al 2008 Phys. Plasmas 15 112503) are utilized to study the plasma response to the n = 1 ( n is the toroidal mode number) resonant magnetic perturbation (RMP), applied to suppress the type-I edge localized mode (ELM) in a KSTAR discharge. Both the resistive-rotating and ideal-static plasma models identify strong screening of the resonant radial field harmonics of the applied RMP due to the plasma response, and predict a strong edge-peeling response of the plasma which is consistent with the optimal ELM control coil current configuration adopted in experiment. The RMP-induced radial displacement of the plasma, computed by the resistive-rotating plasma model, agrees reasonably well with that reconstructed from the measured data in the plasma core. Taking into account the drift kinetic response of fast ions, MARS-K hybrid modeling also finds quantitative agreement of the plasma core fluid pressure perturbation with experiment. Based on the MARS-F computed plasma response, a guiding-center orbit-tracing simulation finds about 0.3% of fast ion losses due the n = 1 RMP in the KSTAR ELM control experiment considered. Most losses are associated with counter-current fast ions located near the plasma edge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation of the Plasma Afterglow in the Discharge Gap of a Subnanosecond Switch Based on an Open Discharge in Helium

The phenomenon of subnanosecond electrical breakdown in a strong electric field observed in an open discharge in helium at pressures of 6–20 Torr can be used to create ultrafast plasma switches triggering into a conducting state for a time shorter than 1 ns. To evaluate the possible repetition rate of such a subnanosecond switch, it is interesting to study the decay dynamics of the plasma remaining in the discharge gap after ultrafast breakdown. In this paper, a kinetic model based on the particle-in-cell Monte Carlo collision method is used to study the dynamics of the plasma afterglow in the discharge gap of a subnanosecond switch operating with helium at a pressure of 6 Torr. The simulation results show that the radiative, collisional-radiative, and three-body collision recombination mechanisms significantly contribute to the afterglow decay only while the plasma density remains higher than 10{sup 12} cm{sup −3}; the main mechanism of the further plasma decay is diffusion of plasma particles onto the wall. Therefore, the effect of recombination in the plasma bulk is observed only during the first 10–20 μs of the afterglow. Over nearly the same time, plasma electrons become thermalized. The afterglow time can be substantially reduced by applying a positive voltage U{sub c} to the cathode. Since diffusive losses are limited by the ion mobility, the additional ion drift toward the wall significantly accelerates plasma decay. As U{sub c} increases from 0 to +500 V, the characteristic time of plasma decay is reduced from 35 to 10 μs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Predict-first experimental analysis using automated and integrated magnetohydrodynamic modeling

An integrated-modeling workflow has been developed in this paper for the purpose of performing predict-first analysis of transient-stability experiments. Starting from an existing equilibrium reconstruction from a past experiment, the workflow couples together the EFIT Grad-Shafranov solver [L. Lao et al., Fusion Sci. Technol. 48, 968 (2005)], the EPED model for the pedestal structure [P. B. Snyder et al., Phys. Plasmas 16, 056118 (2009)], and the NEO drift-kinetic-equation solver [E. A. Belli and J. Candy, Plasma Phys. Controlled Fusion 54, 015015 (2012)] (for bootstrap current calculations) in order to generate equilibria with self-consistent pedestal structures as the plasma shape and various scalar parameters (e.g., normalized β, pedestal density, and edge safety factor [q 95 ]) are changed. These equilibria are then analyzed using automated M3D-C1 extended-magnetohydrodynamic modeling [S. C. Jardin et al., Comput. Sci. Discovery 5, 014002 (2012)] to compute the plasma response to three-dimensional magnetic perturbations. This workflow was created in conjunction with a DIII-D experiment examining the effect of triangularity on the 3D plasma response. Several versions of the workflow were developed, and the initial ones were used to help guide experimental planning (e.g., determining the plasma current necessary to maintain the constant edge safety factor in various shapes). Subsequent validation with the experimental results was then used to revise the workflow, ultimately resulting in the complete model presented here. We show that quantitative agreement was achieved between the M3D-C1 plasma response calculated for equilibria generated by the final workflow and equilibria reconstructed from experimental data. A comparison of results from earlier workflows is used to show the importance of properly matching certain experimental parameters in the generated equilibria, including the normalized β, pedestal density, and q 95 . On the other hand, the details of the pedestal current did not significantly impact the plasma response in these equilibria. A comparison to the experimentally measured plasma response shows mixed agreement, indicating that while the equilibria are predicted well, additional analysis tools may be needed. In conclusion, we note the implications that these results have for the success of future predict-first studies, particularly the need for scans of uncertain parameters and for close collaboration between experimentalists and theorists.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

THE DEPENDENCE OF MAGNETIC RECONNECTION ON PLASMA {beta} AND MAGNETIC SHEAR: EVIDENCE FROM SOLAR WIND OBSERVATIONS

We address the conditions for the onset of magnetic reconnection based on a survey of 197 reconnection events in solar wind current sheets observed by the Wind spacecraft. We report the first observational evidence for the dependence of the occurrence of reconnection on a combination of the magnetic field shear angle, {theta}, across the current sheet and the difference in the plasma {beta} values on the two sides of the current sheet, {Delta}{beta}. For low {Delta}{beta}, reconnection occurred for both low and high magnetic shears, whereas only large magnetic shear events were observed for large {Delta}{beta}: Events with shears as low as 11{sup 0} were observed for {Delta}{beta} < 0.1, but for {Delta}{beta} > 1.5 only events with {theta} > 100{sup 0} were detected. Our observations are in quantitative agreement with a theoretical prediction that reconnection is suppressed in high {beta} plasmas at low magnetic shears due to super-Alfvenic drift of the X-line caused by plasma pressure gradients across the current sheet. The magnetic shear-{Delta}{beta} dependence could account for the high occurrence rate of reconnection observed in current sheets embedded within interplanetary coronal mass ejections, compared to those in the ambient solar wind. It would also suggest that reconnection could occur at a substantially higher rate in solar wind current sheets closer to the Sun than at 1 AU and thus may play an important role in the generation and heating of the solar wind.

79 ASTRONOMY AND ASTROPHYSICS↗

Simulations of the Stable Expansion of a Monoelement Three-Component Explosive-Emission Plasma

The results of numerical simulations of the stable expansion stage of a micro explosive plasma plume are presented. A three-liquid hydrodynamic model was used with corrections allowing its application to the consistent description of the transfer of particles in a monoelement plasma with ions with two different charges and of the electron transfer in a changing plasma–collector vacuum gap. The evolution of concentration profiles, the drift velocity, and electron and ion temperatures in plasma are analyzed depending on conditions of a collector. It is shown in the model that the velocity separation of ions with different charges occurs efficiently in the absence of an external electric field, whereas in a current-carrying plasma, the ions with different charges move with almost identical velocities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of resonant helical magnetic fields on plasma rotation

The effect of a resonant helical magnetic field on plasma rotation is investigated numerically based on the two fluid equations. It is found that depending on the frequency and the direction of the original plasma rotation, a static helical field of a small amplitude can either increase or decrease the rotation speed. With increasing the field amplitude, the plasma rotation frequency approaches the electron diamagnetic drift frequency but rotates in the ion drift direction. These results provide a new understanding of the recent experimental observations of TEXTOR [K. H. Finken et al., Phys. Rev. Lett. 94, 015003 (2005)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Heuristic Drift-based Model of the Power Scrape-off width in H-mode Tokamaks

An heuristic model for the plasma scrape-off width in H-mode plasmas is introduced. Grad B and curv B drifts into the SOL are balanced against sonic parallel flows out of the SOL, to the divertor plates. The overall particle flow pattern posited is a modification for open field lines of Pfirsch-Shlüter flows to include sinks to the divertors. These assumptions result in an estimated SOL width of ~ 2aρp/R. They also result in a first-principles calculation of the particle confinement time of H-mode plasmas, qualitatively consistent with experimental observations. It is next assumed that anomalous perpendicular electron thermal diffusivity is the dominant source of heat flux across the separatrix, investing the SOL width, defined above, with heat from the main plasma. The separatrix temperature is calculated based on a two-point model balancing power input to the SOL with Spitzer-Härm parallel thermal conduction losses to the divertor. This results in a heuristic closed-form prediction for the power scrape-off width that is in reasonable quantitative agreement both in absolute magnitude and in scaling with recent experimental data from deuterium plasmas. Further work should include full numerical calculations, including all magnetic and electric drifts, as well as more thorough comparison with experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Drift modes of a quasi-two-dimensional current sheet

Stability of a plasma configuration consisting of a thin one-dimensional current sheet embedded into a two-dimensional background current sheet is studied. Drift modes developing in plasma as unstable waves along the current direction are considered. Dispersion relations for kink and sausage perturbation modes are obtained depending on the ratio of parameters of thin and background current sheets. It is shown that the existence of the background sheet results in a decrease in the instability growth rates and a significant increase in the perturbation wavelengths. The role of drift modes in the excitation of oscillations observed in the current sheet of the Earth's magnetotail is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the correlation between ‘non-local’ effects and intrinsic rotation reversals in Alcator C-Mod

Contemporary predictive models for heat and particle transport in tokamak plasmas are based on the assumption that local fluxes can be described in terms of local plasma parameters, where electromagnetic drift-wave-type turbulence is driven by local gradients and results in cross-field transport. The question of whether or not transport could be dominated by non-local terms in certain circumstances is essential for our understanding of transport in magnetically confined plasmas, and critical for developing predictive models for future tokamaks, such as ITER. Perturbative transport experiments using cold-pulse injections at low density seem to challenge the local closure of anomalous transport: a rapid temperature increase in the core of the plasma following a sharp edge cooling is widely observed in tokamaks and helical devices. Past work in Ohmic plasmas in Alcator C-Mod and in ECH plasmas in KSTAR found that the temperature inversions disappear at higher densities, above the intrinsic toroidal rotation reversal density. These observations suggested that the so-called 'non-local' heat transport effects were related to the intrinsic rotation reversal, and therefore to changes in momentum transport. In this work, new experiments and analysis at Alcator C-Mod show that intrinsic rotation reversals and disappearance of temperature inversions are not concomitant in Ohmic plasmas at high plasma current and in ICRH L-modes. This new data set shows that the correlation between transient temperature inversions and intrinsic rotation reversals is not universal, suggesting that 'non-local' heat transport and momentum transport effects may be affected by different physical mechanisms.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the correlation between ‘non-local’ effects and intrinsic rotation reversals in Alcator C-Mod

Contemporary predictive models for heat and particle transport in tokamak plasmas are based on the assumption that local fluxes can be described in terms of local plasma parameters, where electromagnetic drift-wave-type turbulence is driven by local gradients and results in cross-field transport. The question of whether or not transport could be dominated by non-local terms in certain circumstances is essential for our understanding of transport in magnetically confined plasmas, and critical for developing predictive models for future tokamaks, such as ITER. Perturbative transport experiments using cold-pulse injections at low density seem to challenge the local closure of anomalous transport: a rapid temperature increase in the core of the plasma following a sharp edge cooling is widely observed in tokamaks and helical devices. Past work in Ohmic plasmas in Alcator C-Mod and in ECH plasmas in KSTAR found that the temperature inversions disappear at higher densities, above the intrinsic toroidal rotation reversal density. These observations suggested that the so-called 'non-local' heat transport effects were related to the intrinsic rotation reversal, and therefore to changes in momentum transport. In this work, new experiments and analysis at Alcator C-Mod show that intrinsic rotation reversals and disappearance of temperature inversions are not concomitant in Ohmic plasmas at high plasma current and in ICRH L-modes. This new data set shows that the correlation between transient temperature inversions and intrinsic rotation reversals is not universal, suggesting that 'non-local' heat transport and momentum transport effects may be affected by different physical mechanisms.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗