Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NEUTRON REACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Neutrons produced by known energies of ions abundant in space

Particle accelerator radiation measurements are applied to the problem of calculating biological dose from radiation produced in the walls of a spacecraft by various ions in space. Neutrons, one of the products of the interactions of energetic ions with matter, are usually quite penetrating and have large values of Q.F. or R.B.E. Ions of helium, boron, carbon, nitrogen, and oxygen were accelerated and directed onto target materials of copper or tantalum. The secondary neutron production was determined. Studies were made of the angular distribution and an inferred neutron spectrum was calculated from activities of threshold reaction detectors.

Wadman, W. W., III↗

Doping explosive materials for neutron radiographic enhancement.

Discussion of studies relating to the selection of doping materials of high neutron absorption usable for enhancing the neutron radiographic imaging of explosive mixtures, without interfering with the proper chemical reaction of the explosives. The results of the studies show that gadolinium oxide is an excellent material for doping explosive mixtures to enhance the neutron radiographic image.

Golliher, K. G.↗

Background estimation in a (gnu e)-diffusion detector

Background conditions for detecting (gamma e)-diffusion are discussed with reference to the utilization of a hodoscope system consisting of wide area flat Geiger counters connected for coincidence and of a controllable spark chamber. When calculating the background, any organic compounds synthesized from C, O2 and H2 with radioactive admixtures is presumed to be the preferrable material for the construction of the detector. The number of background events simulating the effect sought is estimated by analyzing the spectrum of the organic glass gamma radiation caused by disintegration and fission of long lived isotopes and by nuclear reactions with the participation of alpha particles and neutrons.

Glotov, V. I.↗

TCR Central Shutdown Rod Fine Motion Control

Transformational Challenge Reactor (TCR) is a Helium cooled 3 MWt test reactor that leverages advances in materials and manufacturing, computing, and AI in its design. Classical design of a shutdown rod uses either gravity, pneumatic, or springs to quickly release the Central Shutdown Rod (CSR) containing neutron absorber into the reactor core stopping nuclear reaction. Generally, the motor/actuator resides outside the reactor, but the motion is transmitted through a penetration into the pressure vessel. There are also designs where the control rod drive incorporates magnetic latches with coil residing outside the pressure boundary for precise position control of the rod. We are proposing a magnetic coupling to position the shutdown rod without any penetration into the pressure vessel for the entire drive length of TCR shutdown rod. Electromagnets are currently used in non-power nuclear reactors for shutdown rods, but these electromagnets are resident inside the reactor pressure vessel. This paper will describe the use of an electromagnet outside the pressure vessel to position and release the shutdown rod. A prototype was developed at ORNL to demonstrate the concept, and a design optimization of the ferritic core and material was conducted to maximize the lift force of the electromagnet. An elevated temperature testing was also performed to ensure that the system will perform under the temperature conditions inside an operating reactor.

Fountain, Eliott J.↗

Thin-film target for DT neutron production

A novel thin-film target can the life of tritium targets for the production of 14 MeV neutrons by the 3H(2H,n)4He nuclear reaction while using only a small fraction of the amount of tritium compared to a standard thick-film target. With the thin-film target, the incident deuterium is implanted through the front tritide film into the underlying substrate material. A thin permeation barrier layer between the tritide film and substrate reduces the rate of tritium loss from the tritide film. As an example, good thin-film target performance was achieved using W and Fe for the barrier and substrate materials, respectively.

Wampler, William R.↗

Analysis of SPND Material Candidates for Real-Time Neutron Spectrum Monitoring Poster

The future of the nuclear industry will be shaped by advanced reactor designs requiring innovative instrumentation for safe operation. A key area of innovation is the ability to accurately and reliably monitor the neutron energy spectrum during operations, which would also enhance the experimental capabilities of existing research reactors. To address this need, our research focuses on the potential use of Self-Powered Neutron Detectors (SPNDs) for real-time neutron spectrum monitoring. We investigated various candidate materials for SPNDs by evaluating their energy-dependent reaction rates. Promising materials were further modeled using MCNP to determine the free electron production per neutron across the neutron energy spectrum, approximating their energy-dependent signal sensitivity. Our findings identified Samarium (Sm) and Gadolinium (Gd) as top candidates for thermal neutrons, Hafnium (Hf) and Thulium (Tm) for epithermal neutrons, and Tantalum (Ta) for fast neutrons. These materials will undergo future experimental validation to confirm the modeled responses and assess their feasibility for real-time neutron spectrum measurements.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗

High spatial resolution neutron imaging of lithium-ion batteries: Correlating microstructure and lithium transport

Thick electrodes for lithium-ion batteries can increase the overall energy density, but increasing the electrode thickness introduces charge transport limitations. These limitations may be mitigated through proper electrode structuring. Here, high spatial resolution neutron imaging was used to understand the correlation between microstructure and lithium transport in lithium-ion anodes. Batteries with distinct graphite anode microstructures were produced and studied with high spatial resolution in operando neutron radiography to observe the effects of structure on transport. High spatial resolution neutron computed tomography was performed following in operando neutron radiography. X-ray computed tomography and scanning electron microscopy were used to observe the finer scale anode structure to complement neutron imaging. Solvent-free anodes containing a tightly-packed layered structure confined lithium movement close to the separator. This structure limited capacity, but supported better rate capability. Conversely, a more open pore structure in the wet cast anodes yielded higher capacity with reduced rate capability. Together, these results show that lithium distributions can be controlled by the macroscopic structure of the electrodes, the microstructural pore network, and the microscale active areas that support electrochemical reactions. Furthermore, multimodal imaging applying the complementary strengths of neutron and X-ray methods is shown as a tool for advancing battery design.

25 ENERGY STORAGE↗

Nanoscale Structure and Dynamics in Geochemical Systems

Neutron scattering is a powerful tool to elucidate the structure and dynamics of systems that are important to geochemists, including ion association in complex aqueous solutions, solvent-exchange reactions at mineral–water interfaces, and reaction and transport of fluids in nanoporous materials. This article focusses on three techniques: neutron diffraction, which can reveal the atomic-level structure of aqueous solutions and solids; quasi-elastic neutron scattering, which measures the diffusional dynamics at mineral–water interfaces; and small-angle neutron scattering, which can show how properties of nanoporous systems change during gas, liquid, and solute imbibition and reaction. Furthermore, the usefulness and applicability of the experimental results are extended by rigorous comparison to computational simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relationship between magnetoresistance behavior and magnetic states in intercalated compounds Fe x TiS 2

Here, temperature and field-dependent neutron powder diffraction (NPD) measurements have been performed to reveal the nature of the unusual evolution of the magnetoresistance behavior with increasing Fe content in the intercalated compounds Fe x TiS 2 (with x=0.25,0.33,0.50,0.55) synthesized by solid-phase reaction method with prolonged homogenization heat treatment. As derived from neutron diffraction measurements, both the Fe 0.25 TiS 2 and the Fe 0.50 TiS 2 compound exhibit an antiferromagnetic (AFM) order below their respective Néel temperatures T N ≈52 K and T N ≈140K, which results in the presence of a large magnetoresistance accompanying the field-induced phase transition from AFM to the ferromagnetic (FM) state. At low temperatures, this AFM-FM transition is irreversible, confirmed by the irreversibility of changes in the NPD patterns and the presence of remnant magnetoresistance. In contrast, Fe 0.33 TiS 2 shows short-range magnetic order at T f ≈44 K due to a triangular network of intercalated Fe atoms and frustrations of exchange interactions with a field-induced FM alignment of Fe magnetic moments in an applied magnetic field as revealed by NPD measurements. The field-induced transformations of the cluster glass magnetic state in this compound lead to a significant decrease in electrical resistivity. According to NPD data, a reduced impact of an external magnetic field on the electrical resistivity of the compound Fe 0.55 TiS 2 can be ascribed to the presence of ferromagnetic or ferrimagnetic order in compounds with the Fe concentrations above x=0.50. The results obtained indicate that the distribution of the Fe atoms, along with their concentration in Fe x TiS 2 layered compounds, plays a decisive role in the formation of the magnetic state and the behavior of the magnetoresistance.

36 MATERIALS SCIENCE↗

First JSNS 2 measurement of the electron neutrino flux using the 12 C⁡(𝜈 𝑒 ,𝑒 − )⁢ 12 N g.s. reaction

JSNS2 (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) is an experiment searching for sterile neutrinos through the observation of ν¯μ→ν¯e appearance oscillations, using neutrinos produced by muon decay-at-rest. A key aspect of the experiment involves accurately understanding the neutrino flux and the quantities of pions and muons, which are progenitors of (anti)neutrinos, given that their production rates have yet to be measured. We present the first electron-neutrino flux measurement using C12(νe,e−)12Ng.s. reaction in JSNS2, yielding a flux of (6.7±1.6(stat)±1.7(syst))×10−9 cm−2 proton−1 at the JSNS2 detector location, located at 24 meters distance from the mercury target. This flux measurement is consistent with predictions from simulations based on hadron models.

Particle decays↗

Inverse kinematics study of the energy levels of 21 Ne populated with the 20 Ne +𝑑 reaction

In recent years there has been significant experimental effort aimed at studying the impact of 16 O neutron poisoning on the weak 𝑠 process in rotating massive stars. Improving the understanding of energy levels in 21 Ne is crucial to reducing uncertainties in the rates of the 𝛼-induced reactions on 17 O that determine the overall efficiency of the weak 𝑠 process. This paper reports on one such experiment: a study of the 20 Ne (𝑑,𝑝)⁢ 21 Ne reaction in inverse kinematics. Deduced spin-parity assignments were made based on adiabatic distorted-wave approximation analysis and neutron partial widths were estimated by comparison with a previous experiment. Of particular significance for nuclear astrophysics is the resulting neutron partial width for the 7820-keV energy level, estimated to be 12 200 ⁢(2900)⁢ eV, and an upper limit of ≤ 9300 eV for that of the 7749-keV energy level. These results are in tension with previous studies and therefore this paper also discusses the current state of the research into the astrophysically relevant energy levels and highlights both areas of agreement and areas of disagreement between this and various other studies that have investigated this nucleus.

direct reactions↗

Probing Thermal Stability of Li-Ion Battery Ni-Rich Layered Oxide Cathodes by means of Operando Gas Analysis and Neutron Diffraction

Thermal stability is a crucial parameter that must be considered within the overall performance metrics of Ni-rich layered oxide cathodes. While the intrinsic structural stability of the cathode materials under thermal conditions is important, it is also critical to consider their reaction with electrolytes. In this study, operando gas analysis, ex situ neutron diffraction, and differential scanning calorimetry were combined to give a broader picture of the thermal stability of Ni-rich NMC cathodes. Li 1– x Ni 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) composite materials with four different states of charge were investigated with and without the presence of an electrolyte. It has been found that electrolyte can greatly accelerate both the structural and thermal decomposition of the cathode materials. A higher state of charge will also make cathode materials more susceptible to thermal shock. Without an electrolyte, O 2 release inducing a structural change from layered to rock salt was the major observation during thermal runaway. However, all samples retained some levels of layered structure after annealing up to 300 °C without the electrolyte. In comparison, almost all the O3-type layered phase transformed to the rock-salt phase for the cathode materials heated with the electrolyte at the same experimental conditions. Moreover, the amount of CO 2 increased by nearly two orders of magnitude when annealing cathode materials with electrolyte in operando gas analysis experiments. More delithiated NMC811 samples released larger amounts of CO 2 at earlier onset temperatures, resonating well with the differential scanning calorimetry (DSC) results showing that more delithiated samples release more heat during thermal shock.

25 ENERGY STORAGE↗

Correcting the PFNS for more consistent fission modeling

For FY20, we had a deliverable to write a report detailing efforts to simultaneously evaluate both the prompt neutron multiplicity, $\overline{ν}$, and the prompt neutron fission neutron spectrum, PFNS, using CGMF. CGMF is the LANL-developed fission fragment decay code that consistently evaporates prompt neutrons and γ rays using the Hauser-Feshbach statistical theory of compound reactions. The decay begins by constructing the initial conditions of the fission fragments, then decaying each one from the excited state by neutrons and γ rays, conserving energy, momentum, spin, and parity in each step of the emission. The initial conditions of the fragments, along with the multiplicity, energy, and direction of each emitted neutron or γ ray, are recorded, allowing for the full reconstruction of the fission event. These event histories allow us to reconstruct average quantities, as well as correlations between observables, that can be compared with experimental or evaluated data. In that initial report, although there was already a favorable comparison between $\overline{ν}$ from CGMF, experiment, and the current ENDF/B-VIII.0 evaluation, we showed that there was still significant work to be done to improve the PFNS from CGMF. Historically, the PFNS is calculated too soft by Hauser-Feshbach fission models, and CGMF is no exception. The incorrect shape presents a significant challenge in fission modeling, including for our understanding of the fission process and for our ability to consistently calculate and predict a variety of prompt fission observables (such as fission fragment initial conditions, neutron and γ-ray multiplicities and energies, and the correlations between all observables). In our companion report, we detail our success in using CGMF to evaluate $\overline{ν}$. Although not included in the optimization explicitly, we also keep the initial conditions of the fission fragments physical, along with reproducing reasonably well the neutron multiplicity distribution. As we would expect from the sensitivities calculations from, the average neutron energies change very little from the $\overline{ν}$ optimization along with the PFNS (as will be shown in Sec. 2.6). The conclusion was that the global and statistical models would have to be investigated instead of just the fission fragment initial conditions (as is sufficient for $\overline{ν}$). This report details those efforts.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

First (p,n) reaction measurement in inverse kinematics with SECAR

Nucleosynthesis in the νp-process occurs in regions of slightly proton-rich nuclei in the neutrino-driven wind of core-collapse supernovae. The process proceeds via a sequence of (p,γ) and (n,p) reactions, and depending on the conditions, may produce elements between Ni and Sn. Recent studies show that a few key (n,p) reactions regulate the efficiency of the neutrino-p process (νp-process). We performed a study of one of such (n,p) reactions via the measurement of the reverse (p,n) in inverse kinematics with SECAR at NSCL/FRIB.Such proton-induced reaction measurements are particularly challenging, as the recoils and the unreacted projectiles have nearly identical masses. An appropriate separation level can be achieved with SECAR, and along with the incoincidence detection of neutrons these measurements become attainable. The preparation of the SECAR system for accommodating its first (p,n) reaction measurement, including the development of alternative ion beam optics, and the setup of the in-coincidence neutron detection, along with discussion on preliminary results from the p(58Fe,n)58Co reaction measurement are presented and discussed.

Tsintari, P↗

Mass measurement of 27 P to constrain type-I x-ray burst models and validate the isobaric multiplet mass equation for the $A = 27, T = \frac{3}{2}$ isospin quartet

Background: Light curves are the primary observable of type-I x-ray bursts. Computational x-ray burst models must match simulations to observed light curves. Most of the error in simulated curves comes from uncertainties in rp process reaction rates, which can be reduced via precision mass measurements of neutron-deficient isotopes in the rp process path. Purpose: Perform a precise atomic mass measurement of 27 P. Use this new measurement to calculate rp process reaction rates and input these rates into an x-ray burst model to reduce simulated light curve uncertainty. Use the mass measurement of 27 P to validate the isobaric multiplet mass equation (IMME) for the A = 27 T = 3/2 isospin quartet which 27 P belongs to. Method: High-precision Penning trap mass spectrometry utilizing the time-of-flight ion cyclotron resonance technique was used to determine the atomic mass of 27 P. The MESA code (Modules for Experiments in Stellar Astrophysics) was then used to simulate x-ray bursts using a one-dimensional multizone model to produce updated light curves. Results: The mass excess of 27 P was measured to be –670.7(6) keV, a 14-fold precision increase over the mass reported in the 2020 Atomic Mass Evaluation (AME2020). The 26 Si(p, $γ$) 27 P– 27 P($γ$, p) 26 Si rate equilibrium has been determined to a higher precision based on the precision mass measurement of 27 P. x-ray burst light curves were produced with the MESA code using the new reaction rates. Changes in the mass of 27 P seem to have minimal effect on light curves, even in burster systems tailored to maximize impact. Conclusion: The mass of 27 P does not play a significant role in x-ray burst light curves. It is important to understand that more advanced models do not just provide more precise results, but often qualitatively different ones. This result brings us a step closer to being able to extract stellar parameters from individual x-ray burst observations. In addition, the IMME has been validated for the A = 27, T = 3/2 quartet. The normal quadratic form of the IMME using the latest data yields a reduced $χ$ 2 of 2.9. Finally, the cubic term required to generate an exact fit to the latest data matches theoretical attempts to predict this term.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Godiva IV central cavity neutron environment characterization with threshold neutron detectors

Godiva IV is a cylindrical fast burst reactor comprised of approximately 65 kg of highly enriched uranium that is operated by Los Alamos National Laboratory and sited at the National Criticality Experiments Research Center at the Nevada National Security Site in Nevada in the United States. Godiva IV is typically operated at delayed critical and in the regime spanning from sub-prompt to super-prompt bursts. Godiva IV is used for sample irradiations, criticality safety demonstrations, dosimetry studies, and for studying super-prompt behavior. In preparation for both an upcoming experiment to reduce uncertainties in the prompt fission spectrum for 235U using threshold neutron detectors, and for future research using Godiva IV, it was desired to exercise the process of the selection of threshold neutron detectors/activation foils, radiation metrology, and the subsequent adjustment of the neutron spectrum. For this exercise, nine high purity threshold neutron detectors/activation foils were irradiated in a Godiva IV burst. The foils were then analyzed using a high-purity germanium detector in the NCERC counting laboratory to determine end of irradiation specific activities for available IRDFF-II reactions. This work summarizes the Godiva IV foil irradiation, radiation metrology results, and adjusted neutron spectrum. The results of this exercise ultimately characterized the neutron environment inside the sample irradiation cavity inside Godiva IV to a higher degree than previously performed, informed decisions for the upcoming larger scale experiment, and will inform future neutron spectrum characterizations at NCERC.

Whitman, Nicholas H.↗

Thermonuclear processes and accretion onto neutron star envelopes - X-ray burst and transient sources

A Lagrangian, fully implicit, one-dimensional hydrodynamic computer code is used to investigate the evolution of thermonuclear runaways in the thick accreted hydrogen-rich envelopes of 1.0-solar-mass neutron stars having radii of 10 km and 20 km. The simulations produce outbursts that range in time scale from about 2000 seconds to more than a day. For the 10-km study, the peak effective temperature is 3.3 x 10 to the 7th K, and the peak luminosity is 2 x 10 to the 5th solar luminosities. The 20-km neutron star produces a peak effective temperature and luminosity of 5.3 x 10 to the 6th K and 5.9 x 10 to the 2nd solar luminosities. Also investigated are the effects of changes in the rates of the O-14(alpha, proton) and O-15(alpha, gamma) reactions on the evolution. Hydrodynamic expansion on the 10-km neutron star produces a precursor lasting about 10 to the -6th sec. The evolution of a gas cloud impacting the surface of a 20-km, 1-solar-mass neutron star is studied in an attempt to simulate the magnetospheric gate model of the X-ray burst sources.

Starrfield, S.↗

H 2 generation by the 10 B(n,α) 7 Li reaction in high temperature water

H 2 produced in water from the 10 B(n,α) 7 Li fission reaction has been measured up to 300 °C. Thermal energy neutrons from the Rhode Island Nuclear Science Center's 2 MW reactor interact with boric acid-containing water in temperature-controlled high-pressure cells made from tubing of either titanium or zirconium alloy. After exposure for a minimum of 1 h, the solution sample is extracted and sparged with argon. The H 2 entrained by the sparging gas is sampled with a small mass spectrometer. A small amount of sodium is included in the boric acid solution so that after sparging, samples can be collected for 24 Na activation measurements in a gamma spectrometer to determine the neutron exposure and thus the total energy deposited in solution. The G-value (μmol/J) for H 2 production is obtained for water at a pressure of 25 MPa, over a temperature range from 20 °C to 300 °C. The weak temperature dependence of this yield between 150 °C and 200 °C demonstrates that the bimolecular reaction of pairs of e$^{–}_{aq}$ is a very minor source of H 2 in high LET tracks.

10B↗