SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Cryogenic requirements are examined for new missions to the moon. A comparison is made with previous moon landings and a technology assessment investigates the new requirements for such missions. All of the material is presented in viewgraph format.
Total extrusive and intrusive magma generated on Mars over the last approximately 3.8 billion years is estimated at 654 x 10 exp 6 cubic kilometers, or 0.17 cubic kilometers per year, substantially less than rates for earth (26 to 34 cu/km yr) and Venus (less than 20 cu/km yr) but much more than for the moon (0.025 cu/km yr). When scaled to earth's mass the Martian rate is much smaller than that for earth or Venus and slightly smaller than for the moon.
The secular change in the mean motion of the moon, n, caused by the tidal dissipation in the ocean and solid earth is due primarily to the effect of the diurnal and semidiurnal tides. The long-period ocean tides produce an increase in n, but the effects are only 1 percent of the diurnal and semidiurnal ocean tides. In this investigation, expressions for these effects are obtained by developing the tidal potential in the ecliptic reference system. The computation of the amplitude of equilibrium tide and the phase corrections is also discussed. The averaged tidal deceleration of the moon's mean motion, n, from the most recent satellite ocean tide solutions is -25.25 +/- 0.4 arcseconds/sq century. The value for n inferred from the satellite-determined ocean-tide solution is in good agreement with the value obtained from the analysis of 20 years of lunar laser-ranging observations.
The cratering history of the moon is reexamined taking data acquired over the last decade into account along with a newly accepted concept concerning the moon's origin. It is found that predictions of a heavy bombardment are not fulfilled by lunar characteristics as understood from sample and remote sensing studies, nor by lunar accretion history. There is strong evidence for the reality for a short, intense, cataclysmic bombardment at about 3.85 Ga.
A geologic characterization is presented of 17 newly identified localized pyroclastic deposits on the western limb of the moon. The results show that lunar pyroclastic deposits are more pervasive on the western limb of the moon than once thought. The western limb dark-mantle deposits in the proximal zone are probably related to faults and fractures associated with the Cordillera ring of Orientale Basin. All the localized pyroclastic deposits on the western limb for which near-infrared reflectance spectra have been obtained exhibit parameter that allowed them to be assigned to the three spectral groups described elsewhere. Western limb pyroclastic deposits appear to represent various stages in a formational sequence in which an initial explosive phase is followed by varying amounts of mare flooding. In view of their sequential formation, both the pyroclastic and mare materials associated with individual volcanic complexes may be the products of the same parent magmas and have very similar compositions.
Theoretical considerations of vapor-rock interactions in the lunar environment are a useful supplement to petrologic studies of mineralization or alteration in rocks from the moon. They also provide insights into the potential for the existence of more extensive mineralization on the moon than is found in the limited sample set. Discussed in this paper are the coexistence and textural association in 66095 of the phases lawrencite, troilite, schreibersite, iron metal, and sphalerite; the replacement of olivine in certain clasts of 67016 by troilite and enstatite; and the existence of Zn + S deposits on the surfaces of volcanic glass beads. Particular attention is given in each case to whether the observed mineralization implies that metals, as well as S, P, or Cl, have been mobilized in the vapor. Vapor species that might mobilize metals in the absence of H2O are considered. Most importantly, the suggestion is made that in the dry lunar environment carbonyl species may be important carriers of S and metals. The implications of this possibility are discussed.
Four candidate imaging aperture synthesis concepts are described for possible emplacement on the moon beginning in the next decade. These include an optical interferometer with 10 microarcsec resolution, a submillimeter array with 6 milliarcsec resolution, a moon-earth VLBI experiment, and a very low frequency interferometer in lunar orbit.
The question is examined of whether it makes sense to believe that there will one day be an interferometric array of telescopes on the Moon. The question is really one of national commitment to a lunar base, since it is not likely that a scientific undertaking of this magnitude would occur in the absence of permanent human presence on the Moon. A discussion is also given of the real possibility if the exploration of space should be a multinational effort.
The rocks and minerals of the Moon will be included among the raw materials used to construct a lunar base. The lunar regolith, the fragmental material present on the surface of the Moon, is composed mostly of disaggregated rocks and minerals, but also includes glassy fragments fused together by meteorite impacts. The finer fraction of the regolith (i.e., less than 1 cm) is informally referred to as soil. The soil is probably the most important portion of the regolith for use at a lunar base. For example, soil can be used as insulation against cosmic rays, for lunar ceramics and abodes, or for growing plants. The soil contains abundant solar-wind-implanted elements as well as various minerals, particularly oxide phases, that are of potential economic importance. For example, these components of the soil are sources of oxygen and hydrogen for rocket fuel, helium for nuclear energy, and metals such as Fe, Al, Si, and Ti.
When a long-term lunar base is constructed, most of the materials for the construction will be natural resources on the Moon, mainly for economic reasons. In terms of economy and exploiting natural resources, concrete would be the most suitable material for construction. This paper describes the possibility of concrete production on the Moon. The possible production methods are derived from the results of a series of experiments that were carried out taking two main environmental features, low gravity acceleration and vacuum, into consideration.
Supporting any but the smallest lunar facility will require indigenous resources due to the extremely high cost of bringing material from Earth. The Moon has also attracted interest as a resource base to help support near-Earth space activities, because of the potential lower cost once the necessary infrastructure has been amortized. Obviously, initial lunar products will be high-volume, bulk commodities, as they are the only ones for which the economics of lunar production are conceivably attractive. Certain rarer elements, such as the halogens, C, and H, would also be extremely useful (for propellant, life support, and/or reagents), and indeed local sources of such elements would vastly improve the economics of lunar resource extraction. The economic geology of the Moon is discussed.
Recent ROSAT images reported by Schmitt et el. show that the sunlit part of the Moon is a significant source of very soft x rays. Stimulated by these observations, Edwards et al. have made an analysis of the response of the Moon to the solar soft x ray and EUV spectrum. They argue that much of the observed emission is in the form of discrete fluorescence lines in the energy range 25 to 100 eV, and that these lines are generally much stronger than the adjacent directly scattered solar background. On this basis they suggest that soft x ray fluorescence can be used to remotely obtain high-precision elemental maps of the lunar surface. Edwards et al. have continued to develop this idea and have suggested a system using soft x ray telescopes in lunar orbit, which could also obtain very good spatial resolution. This combination could be extremely valuable in furthering our understanding of lunar chemistry and potential resource distributions. High spatial resolution combined with the thin surface layer from which these soft x rays arise suggests the exciting possibility that x ray telescopes could map lunar volcanic volatiles from orbit.
A simplified computational model of low Earth orbit-Moon transportation system has been developed to provide insight into the benefits of new transportation technologies. A reference transportation infrastructure, based upon near-term technology developments, is used as a departure point for assessing other, more advanced alternatives. Comparison of the benefits of technology application, measured in terms of a mass payback ratio, suggests that several of the advanced technology alternatives could substantially improve the efficiency of low Earth orbit-Moon transportation.
The Moon is an excellent site for astronomical observations. This paper describes two geological aspects related to astronomy from the Moon. First it evaluates the sources of gases near a lunar base as input to calculations reported in a separate paper on the growth of an artificial lunar atmosphere. The results suggest that mining for He-3 could produce the most gas (1 kg/sec), but rocket exhaust (0.1 kg/sec) and habitat venting (0.5 kg/sec) are also important. Second, the paper discusses criteria that need to be considered when determining the site of a lunar astronomical facility. These are longitude and latitude (equatorial sites are favored), topography (important to be relatively flat for ease of installation), distance from a lunar base (to be free of seismic noise, dust, and gases), the site's value to lunar geoscience (other factors being equal, a geologically diverse site is better), and its value as a materials resource (mining and observatories are incompatible).
The feasibility of recovering helium (He) from the Moon as a source of fusion energy on Earth is currently being studied at the University of Wisconsin. Part of this study is selection and evaluation of potential sites for lunar He mining. Selection and evaluation of potential mining sites are based on four salient findings by various investigators of lunar samples: (1) Regoliths from areas underlain by highland materials contain less than 20 wppm He; (2) Certain maria regoliths contain less than 20 wppm He, but other contain 25 to 49 wppm; (3) The He content of a mare regolith is a function of its composition; regoliths rich in Ti are relatively rich in He; and (4) He is concentrated in the less than 100-micron size fractions of regoliths. The first three findings suggest that maria are the most promising mining sites, specifically, those that have high-Ti regoliths. Information on the regional distribution and extent of high-Ti regoliths comes mainly from two sources: direct sampling by various Apollo and Luna missions, and remote sensing by gamma-ray spectroscopy and Earth-based measurements of lunar spectral reflectance. Sampling provides essential control on calibration and interpretation of data from remote sensing. These data indicate that Mare Tranquillitatis is the principal area of high-Ti regolith of the eastern nearside, but large areas of high-Ti regolith are indicated in the Imbrium and Procellarum regions. Recovery of significant amounts of He-3 will require mining billions of tonnes of regolith. Large individual areas suitable for mining must therefore be delineated. The concentration of He in the finer size fractions and considerations of ease of mining mean that mining areas must be as free as possible of sizable craters and blocks of rock. Pending additional lunar missions, information regarding these features must be obtained from lunar photographs, photogeologic maps, and radar surveys. The present study is decidedly preliminary; available information is much to limited to permit even a close approach to final evaluations. As a prelude to recovery of He from the Moon, systematic exploration and sampling of high-Ti regoliths should therefore have a high priority in future lunar missions.
The manned exploration of Mars is a massive undertaking which requires careful consideration. A mission to the moon of Mars called Phobos as a prelude to manned landings on the Martian surface offers some advantages. One is that the energy requirements, in terms of delta 5, is only slightly higher than going to the Moon's surface. Another is that Phobos is a potential source of water and carbon which could be extracted and processed for life support and cryogenic propellants for use in future missions; thus, Phobos might serve as a base for extended Mars exploration or for exploration of the outer planets. The design of a vehicle for such a mission is the subject of our Aerospace System Design course this year. The materials and equipment needed for the processing plant would be delivered to Phobos in a prior unmanned mission. This study focuses on what it would take to send a crew to Phobos, set up the processing plant for extraction and storage of water and hydrocarbons, conduct scientific experiments, and return safely to Earth. The size, configuration, and subsystems of the vehicle are described in some detail. The spacecraft carries a crew of five and is launched from low Earth orbit in the year 2010. The outbound trajectory to Mars uses a gravitational assisted swing by of Venus and takes eight months to complete. The stay at Phobos is 60 days at which time the crew will be engaged in setting up the processing facility. The crew will then return to Earth orbit after a total mission duration of 656 days. Both stellar and solar observations will be conducted on both legs of the mission. The design of the spacecraft addresses human factors and life science; mission analysis and control; propulsion; power generation and distribution; thermal control; structural analysis; and planetary, solar, and stellar science. A 0.5 g artificial gravity is generated during transit by spinning about the lateral body axis. Nuclear thermal rockets using hydrogen as fuel are selected to reduce total launch mass and to shorten the duration of the mission. The nuclear systems also provide the primary electrical power via dual mode operation. The overall spacecraft length is 110 meters and the total mass departing from low Earth orbit is 900 metric tons.
In response to the Report of the Advisory Committee on the future of the U.S. Space Program and a request from NASA's Exploration Office, the MIT Hunsaker Aerospace Corporation (HAC) conducted a feasibility study, known as Project Columbiad, on reestablishing human presence on the Moon before the year 2000. The mission criteria established were to transport a four person crew to the lunar surface at any latitude and back to Earth with a 14-28 day stay on the lunar surface. Safety followed by cost of the Columbiad Mission were the top level priorities of HAC. The resulting design has a precursor mission that emplaces the required surface payloads before the piloted mission arrives. Both the precursor and piloted missions require two National Launch System (NLS) launches. Both the precursor and piloted mission have an Earth orbit rendezvous (EOR) with a direct transit to the Moon post-EOR. The piloted mission returns to Earth via a direct transit. Included among the surface payloads preemplaced are a habitat, solar power plant (including fuel cells for the lunar night), lunar rover, and mechanisms used to cover the habitat with regolith (lunar soil) in order to protect the crew members from severe solar flare radiation.
Our present understanding of the tectonic history of the Moon has been shaped in large measure by the Apollo Program, and particularly the Apollo 17 Mission. I attempt to summarize some of the interpretations that have emerged since Apollo 17, focusing on some of the problems and uncertainties that remain to stimulate future exploration of the Moon. The topics covered include: (1) Taurus-Littrow Valley; (2) origin of mare ridges; and (3) nature and timing of tectonic rille formation.