Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Models, Structural”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Structure of Biodegradable Films at Aqueous Surfaces: X-ray Diffraction and Spectroscopy Studies of Polylactides and Tyrosine-Derived Polycarbonates

Three representative polymers of increasing modulus, poly(d,l-lactic acid), PDLLA, poly(desaminotyrosyl-tyrosine ethyl ester carbonate), PDTEC, and the same polymer with iodinated DTE segments, PI2DTEC, were characterized by surface-pressure versus area (Π–A) isotherms and surface sensitive X-ray diffraction techniques. Films of 10–100 Å thickness were prepared for these studies by spreading dilute polymer solutions at air–water interfaces. The general properties of the isotherms and the Flory exponents, determined from the isotherms, vary in accordance with the increasing modulus of PDLLA, PDTEC, PI2DTEC, respectively. The analysis of in situ X-ray reflectivity and grazing incidence X-ray diffraction (GIXD) measurements from films at aqueous surfaces provides a morphological picture that is consistent with the modulus of the polymers, and to a large extent, with their packing in their dry-bulk state. Large absorption of X-rays by iodine enabled X-ray spectroscopic studies under near-total-reflection conditions to determine the iodine distribution in the PI2DTEC film and complement the structural model derived from reflectivity and GIXD. These structural studies lay the foundation for future studies of polymer–protein interactions at aqueous interfaces.

36 MATERIALS SCIENCE↗

A Test of the Tropical 200- to 300-hPa Warming Rate in Climate Models

Overall climate sensitivity to CO 2 doubling in a general circulation model results from a complex system of parameterizations in combination with the underlying model structure. We refer to this as the model’s “major hypothesis” and we assume it to be testable. We explain four criteria a valid test should meet: measurability, specificity, independence and uniqueness. We argue that temperature change in the tropical 200-300 hPa layer meets these criteria. Comparing modeled to observed trends over the past 60 years using a persistence-robust variance estimator shows that all models warm more rapidly than observations and in the majority of individual cases the discrepancy is statistically significant. We argue that this provides informative evidence against the major hypothesis in most current climate models.

54 ENVIRONMENTAL SCIENCES↗

Structural phase diagram for Sm-substituted BiFeO 3 multiferroics

The structural evolution of Sm substituted BiFe⁢O 3 is studied by total x-ray scattering and structure modeling. It is shown that the crystal structure changes from polar to antipolar and then to nonpolar when the Sm to Bi ratio in the material approaches 20% and 40%, respectively, with no intermixing between the structure types. The evolution is driven by lattice strain induced by the difference in the size of Sm and Bi atoms, leading to changes in the pattern of octahedral tilts and Bi off-centering, which, in turn, induce changes in the multiferroic properties. Furthermore, the substitution ratio at which the different structure types emerge appears to be tied up with the average radius of the atomic species occupying the Bi sites in the perovskite lattice and volume occupied by a formula unit, rendering both quantities useful predictor variables for guiding computational searches for substituted BiFe⁢O 3 multiferroics with improved functional properties.

Ferroelectricity↗

A NuMAD Model of the Sandia CX-100 Blade

This report provides basic documentation of information used to create a CX-100 finite element model using NuMAD. The model is intended for use as a structural model. Use of this model for aerodynamic analyses is to be performed with caution. The CX-100 blade was designed to demonstrate the efficient use of carbon fiber in the spar cap of a wind turbine blade. Refer to the References at the end of this report for full and in-depth information on the CX-100 blade project.

17 WIND ENERGY↗

A NuMAD Model of the Sandia BSDS Blade

This report provides basic documentation of information used to create a BSDS finite element model using NuMAD. The model is intended for use as a structural model. Use of this model for aerodynamic analyses is to be performed with caution. The BSDS project successfully demonstrated the design and manufacturing of a wind turbine blade integrating several innovations including flatback airfoils on inboard blade stations, a carbon fiber spar cap and an iterative blade design process. Refer to the References at the end of this report for full and in-depth information on the BSDS blade project.

17 WIND ENERGY↗

A NuMAD Model of the Sandia TX-100 Blade

This report provides basic documentation of information used to create a TX-100 finite element model using NuMAD. The model is intended for use as a structural model. Use of this model for aerodynamic analyses is to be performed with caution. The TX-100 blade was designed to demonstrate the use of bend-twist coupled behavior for fatigue loads alleviation in a wind turbine blade. Refer to the References at the end of this report for full and in-depth information on the TX-100 blade project.

17 WIND ENERGY↗

Bayesian Spatial Models for Projecting Corn Yields

Climate change is predicted to impact corn yields. Previous studies analyzing these impacts differ in data and modeling approaches and, consequently, corn yield projections. We analyze the impacts of climate change on corn yields using two statistical models with different approaches for dealing with county-level effects. The first model, which is novel to modeling corn yields, uses a computationally efficient spatial basis function approach. We use a Bayesian framework to incorporate both parametric and climate model structural uncertainty. We find that the statistical models have similar predictive abilities, but the spatial basis function model is faster and hence potentially a useful tool for crop yield projections. We also explore how different gridded temperature datasets affect the statistical model fit and performance. Compared to the dataset with only weather station data, we find that the dataset composed of satellite and weather station data results in a model with a magnified relationship between temperature and corn yields. For all statistical models, we observe a relationship between temperature and corn yields that is broadly similar to previous studies. We use downscaled and bias-corrected CMIP5 climate model projections to obtain detrended corn yield projections for 2020–2049 and 2069–2098. In both periods, we project a decrease in the mean corn yield production, reinforcing the findings of other studies. However, the magnitude of the decrease and the associated uncertainties we obtain differ from previous studies.

54 ENVIRONMENTAL SCIENCES↗

The Fuzziness of Giant Planets’ Cores

Giant planets are thought to have cores in their deep interiors, and the division into a heavy-element core and hydrogen–helium envelope is applied in both formation and structure models. We show that the primordial internal structure depends on the planetary growth rate, in particular, the ratio of heavy elements accretion to gas accretion. For a wide range of likely conditions, this ratio is in one-to-one correspondence with the resulting post-accretion profile of heavy elements within the planet. This flux ratio depends sensitively on the assumed solid-surface density in the surrounding nebula. We suggest that giant planets’ cores might not be distinct from the envelope and includes some hydrogen and helium, and the deep interior can have a gradual heavy-element structure. Accordingly, Jupiter’s core may not be well defined. Accurate measurements of Jupiter’s gravitational field by Juno could put constraints on Jupiter’s core mass. However, as we suggest here, the definition of Jupiter’s core is complex, and the core’s physical properties (mass, density) depend on the actual definition of the core and on the planet’s growth history.

79 ASTRONOMY AND ASTROPHYSICS↗

HIMMELI v1.0: HelsinkI Model of MEthane buiLd-up and emIssion for peatlands

Wetlands are one of the most significant natural sources of methane (CH 4 ) to the atmosphere. They emit CH 4 because decomposition of soil organic matter in waterlogged anoxic conditions produces CH 4 , in addition to carbon dioxide (CO 2 ). Production of CH 4 and how much of it escapes to the atmosphere depend on a multitude of environmental drivers. Models simulating the processes leading to CH 4 emissions are thus needed for upscaling observations to estimate present CH 4 emissions and for producing scenarios of future atmospheric CH 4 concentrations. Aiming at a CH 4 model that can be added to models describing peatland carbon cycling, we composed a model called HIMMELI that describes CH 4 build-up in and emissions from peatland soils. It is not a full peatland carbon cycle model but it requires the rate of anoxic soil respiration as input. Driven by soil temperature, leaf area index (LAI) of aerenchymatous peatland vegetation, and water table depth (WTD), it simulates the concentrations and transport of CH 4 , CO 2 , and oxygen (O 2 ) in a layered one-dimensional peat column. Here, we present the HIMMELI model structure and results of tests on the model sensitivity to the input data and to the description of the peat column (peat depth and layer thickness), and demonstrate that HIMMELI outputs realistic fluxes by comparing modeled and measured fluxes at two peatland sites. As HIMMELI describes only the CH 4 -related processes, not the full carbon cycle, our analysis revealed mechanisms and dependencies that may remain hidden when testing CH 4 models connected to complete peatland carbon models, which is usually the case. Our results indicated that (1) the model is flexible and robust and thus suitable for different environments; (2) the simulated CH 4 emissions largely depend on the prescribed rate of anoxic respiration; (3) the sensitivity of the total CH 4 emission to other input variables is mainly mediated via the concentrations of dissolved gases, in particular, the O 2 concentrations that affect the CH 4 production and oxidation rates; (4) with given input respiration, the peat column description does not significantly affect the simulated CH 4 emissions in this model version.

54 ENVIRONMENTAL SCIENCES↗

Process-level model evaluation: a snow and heat transfer metric

Land models require evaluation in order to understand results and guide future development. Examining functional relationships between model variables can provide insight into the ability of models to capture fundamental processes and aid in minimizing uncertainties or deficiencies in model forcing. This study quantifies the proficiency of land models to appropriately transfer heat from the soil through a snowpack to the atmosphere during the cooling season (Northern Hemisphere: October–March). Using the basic physics of heat diffusion, we investigate the relationship between seasonal amplitudes of soil versus air temperatures due to insulation from seasonal snow. Observations demonstrate the anticipated exponential relationship of attenuated soil temperature amplitude with increasing snow depth and indicate that the marginal influence of snow insulation diminishes beyond an effective snow depth of about 50 cm. A snow and heat transfer metric (SHTM) is developed to quantify model skill compared to observations. Land models within the CMIP5 experiment vary widely in SHTM scores, and deficiencies can often be traced to model structural weaknesses. The SHTM value for individual models is stable over 150 years of climate, 1850–2005, indicating that the metric is insensitive to climate forcing and can be used to evaluate each model's representation of the insulation process.

58 GEOSCIENCES↗

Experimental evidence of homonuclear bonds in amorphous GaN

Although GaN is an important semiconductor material, its amorphous structures are not well understood. Currently, theoretical atomistic structural models which contradict each other, are proposed for the chemical short-range order of amorphous GaN: one characterizes amorphous GaN networks as highly chemically ordered, consisting of heteronuclear Ga-N atomic bonds; and the other predicts the existence of a large number of homonuclear bonds within the first coordination shell. In the present study, we examine amorphous structures of GaN via radial distribution functions obtained by electron diffraction techniques. The experimental results demonstrate that amorphous GaN networks consist of heterononuclear Ga-N bonds, as well as homonuclear Ga-Ga and N-N bonds.

36 MATERIALS SCIENCE↗

Constrained Block Nonlinear Neural Dynamical Models

Neural network modules conditioned by known priors can be effectively trained and combined to represent systems with nonlinear dynamics. This work explores a novel formulation for data-efficient learning of deep control-oriented nonlinear dynamical models by embedding local model structure and constraints. The proposed method consists of neural network blocks that represent input, state, and output dynamics with constraints placed on the network weights and system variables. For handling partially observable dynamical systems, we utilize a state observer neural network to estimate the states of the system's latent dynamics. We evaluate the performance of the proposed architecture and training methods on system identification tasks for three nonlinear systems: a continuous stirred tank reactor, a two tank interacting system, and an aerodynamics body. Models optimized with a few thousand system state observations accurately represent system dynamics in open loop simulation over thousands of time steps from a single set of initial conditions. Experimental results demonstrate an order of magnitude reduction in open-loop simulation mean squared error for our constrained, block-structured neural models when compared to traditional unstructured and unconstrained neural network models.

Skomski, Elliott↗

BioRT-Flux-PIHM v1.0: a biogeochemical reactive transport model at the watershed scale

Watersheds are the fundamental Earth surface functioning units that connect the land to aquatic systems. Many watershed-scale models represent hydrological processes but not biogeochemical reactive transport processes. This has limited our capability to understand and predict solute export, water chemistry and quality, and Earth system response to changing climate and anthropogenic conditions. Here we present a recently developed BioRT-Flux-PIHM (BioRT hereafter) v1.0, a watershed-scale biogeochemical reactive transport model. The model augments the previously developed RT-Flux-PIHM that integrates land-surface interactions, surface hydrology, and abiotic geochemical reactions. It enables the simulation of (1) shallow and deep-water partitioning to represent surface runoff, shallow soil water, and deeper groundwater and of (2) biotic processes including plant uptake, soil respiration, and nutrient transformation. The reactive transport part of the code has been verified against the widely used reactive transport code CrunchTope. BioRT-Flux-PIHM v1.0 has recently been applied in multiple watersheds under diverse climate, vegetation, and geological conditions. This paper briefly introduces the governing equations and model structure with a focus on new aspects of the model. It also showcases one hydrology example that simulates shallow and deep-water interactions and two biogeochemical examples relevant to nitrate and dissolved organic carbon (DOC). These examples are illustrated in two simulation modes of complexity. One is the spatially lumped mode (i.e., two land cells connected by one river segment) that focuses on processes and average behavior of a watershed. Another is the spatially distributed mode (i.e., hundreds of cells) that includes details of topography, land cover, and soil properties. Whereas the spatially lumped mode represents averaged properties and processes and temporal variations, the spatially distributed mode can be used to understand the impacts of spatial structure and identify hot spots of biogeochemical reactions. The model can be used to mechanistically understand coupled hydrological and biogeochemical processes under gradients of climate, vegetation, geology, and land use conditions.

54 ENVIRONMENTAL SCIENCES↗

Diffusion Paths for Interstitial Impurities in Different Polymorphic Modifications of Niobium Silicide Nb{sub 5}Si{sub 3}

Structural models of the α, β, and γ modifications of Nb{sub 5}Si{sub 3} silicides, which are used as a reinforcing phase in composites obtained in situ based on the Nb‒Si system, have been constructed by computer simulation methods. A geometric analysis of unit cells is performed using the H-poisk program to estimate the voids existing in the structures. The results of measuring the number of voids and their sizes are reported. A conclusion about possible diffusion paths of interstitial boron, carbon, nitrogen and oxygen atoms is drawn based on the calculation results, and the solubility of these impurities in the structure of each Nb{sub 5}Si{sub 3} modification is estimated.

36 MATERIALS SCIENCE↗

Synthesis and crystal structure of RMgSi{sub 2} compounds (R=La, Ce, Pr, Nd), a particular example of linear intergrowth

A new series of rare earth compounds with stoichiometry RMgSi{sub 2} (R=La, Ce, Pr, Nd) is reported. The single crystal X-ray diffraction showed that CeMgSi{sub 2}, which melts congruently at 1200 deg. C, crystallizes in a new tetragonal structure type (I4{sub 1}/amd, tI32, a=4.2652(4) A, c=36.830(4) A, Z=8; wR{sub 2}=0.042 (19 parameters, 393F{sub 0}{sup 2}), R{sub 1}=0.018 (297F{sub 0}>4sigmaF{sub 0}). The crystal structure of CeMgSi{sub 2} can be formally built up by alternating along the z direction four CeMg{sub 2}Si{sub 2}-type CeMg{sub 2}Si{sub 2} slabs with four AlB{sub 2}-type CeSi{sub 2} slabs, one after the other. The structural model obtained from a CeMgSi{sub 2} single crystal has been confirmed for the La, Pr and Nd homologous compounds by means of Rietveld refinement. The trend of the unit-cell parameters, plotted versus the R{sup 3+} ionic radius, shows a linear behaviour, which strongly suggests a trivalent state for the Ce atoms. An analysis of the features of this new structure is reported, in comparison with the other known CeMg{sub 2}Si{sub 2}/AlB{sub 2}-type linear intergrowth compounds. - Graphical abstract: The new crystal structure of CeMgSi{sub 2} can be formally built up by alternating along the z direction, four CeMg{sub 2}Si{sub 2}-type CeMg{sub 2}Si{sub 2} slabs with four AlB{sub 2}-type CeSi{sub 2} slabs, one after the other. A close symmetry relationship holds between the ThSi{sub 2} and CeMgSi{sub 2} structure types, as shown in the figure.

36 MATERIALS SCIENCE↗