Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mixture modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Volatility Basis Set Distributions and Viscosity of Organic Aerosol Mixtures: Insights from Chemical Characterization Using Temperature-Programmed Desorption–Direct Analysis in Real-Time High-Resolution Mass Spectrometry

Quantitative assessment of gas-particle partitioning of individual components within complex atmospheric organic aerosols (OA) mixtures is critical for predicting and comprehending the formation and evolution of OA particles in the atmosphere. This investigation leverages previously documented data obtained through a temperature programmed desorption - direct analysis in real time – high resolution mass spectrometry (TPD-DART-HRMS) platform. This methodology facilitates the bottom-up construction of volatility basis set (VBS) distributions for constituents found in three biogenic secondary organic aerosol (SOA) mixtures produced through the ozonolysis of a-pinene, limonene, and ocimene. The apparent enthalpies (ΔH*, kJ mol -1 ) and saturated vapor mass concentrations (C T *, µg∙m -3 ) of individual SOA components, determined as a function of temperature (T, K), facilitated an assessment of changes in VBS distributions and gas-particle partitioning with respect to T and atmospheric total organic mass loadings (tOM, µg∙m -3 ). Further, the VBS distributions reveal distinct differences in volatilities among monomers, dimers, and trimers, enabling their categorization into separate volatility bins. At the ambient temperature of T = 298 K, only monomers efficiently partition between gas and particle phases across a broad range of atmospherically relevant total organic mass loadings (tOM) values of 1–100 µg∙m -3 . Partitioning of dimers and trimers becomes notable only at T > 360 K and T > 420 K, respectively. The viscosity of SOA mixtures is assessed using a bottom-up calculation approach, incorporating the input of elemental formulas, ΔH*, C T *, and particle-phase mass fractions of the SOA components. Through this approach, we are able to accurately estimate the variations in SOA viscosity that result from the evaporation of its components. These variations are, in turn, influenced by atmospherically relevant changes in tOM and T. Comparison of the calculated SOA viscosity and diffusivity values with literature reported experimental results shows close agreement, thereby validating the employed calculation approach. These findings underscore the significant potential for TPD-DART-HRMS measurements in enabling the untargeted analysis of organic molecules within OA mixtures. This approach facilitates quantitative assessment of their gas-particle partitioning and allows for the estimation of their viscosity and condensed-phase diffusion, thereby contributing valuable insights to atmospheric models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A heat and mass transfer model for evaluation of damaged cesium chloride radiological sources

Radiological sources are vital to many applications, and typically contain byproducts from waste streams which decay over time to form complex mixtures of elements. Daughter products resulting from these decay processes can introduce complicating factors to the integrity and safety of the vessel that contains the radiological material. Sources containing cesium 137 ( 137 Cs) are of particular interest, because the decay of this isotope produces barium metal which reacts readily and exothermically with oxygen. This work employs physics-based numerical tools to examine the thermal response of a radiological source containing a mixture of cesium and barium in the event that vessel walls are damaged and atmospheric gases contact source material. A parametric study was conducted to determine the sensitivity of the response to various factors, including vessel geometry, source material age, the degree of vessel damage, and other parameters. Here, it was found that the peak temperatures that occurred within the source material strongly depend on these parameters, particularly vessel geometry and age, which determine whether a breach would be a relatively minor accident or a catastrophic incident. Finally, the model’s sensitivity to uncertain thermophysical properties is discussed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

Effects of fuel composition and octane sensitivity on polycyclic aromatic hydrocarbon and soot emissions of gasoline–ethanol blend surrogates

The sooting propensity of a fuel is closely coupled with the fuel composition and chemistry. A detailed understanding of their effects is, therefore, needed to develop next-generation fuels which can minimize particulate emissions. With this overarching goal, the present work numerically investigates the effects of fuel composition and octane sensitivity (S) on polycyclic aromatic hydrocarbons (PAH) and soot emissions, for four-component gasoline-ethanol blend surrogates comprising isooctane, n-heptane, toluene, and ethanol. A partially-premixed counterflow flame is chosen as the canonical configuration for this study and simulations are performed using CHEMKIN-Pro-employing a kinetic mechanism developed by Park et al. (2017). In addition, a, detailed soot model based on the sectional method is used to capture the spatial characteristics of soot emissions. The kinetic mechanism and soot model are validated using available experimental data for various targets. A total of 86 TPRF-E mixtures, spanning a wide range of concentration of each component, and a wide range of S are analyzed. The effect of each non-paraffinic fuel component on the resultant PAH and soot emissions is investigated. PAH and soot emissions are found to vary significantly depending upon the blend composition. Additionally, based on the parametric sweeps, a regression analysis is carried out to identify global parameters that govern the formation of PAHs and soot. The analysis shows that both toluene content and S have a prominent effect on the formation of PAHs and soot, with toluene content having a stronger impact. Moreover, larger PAHs have higher dependency on toluene content and S. Furthermore, a detailed analysis is carried out to understand the physical and chemical phenomena associated with the observed trends of PAH and soot emissions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Development of a Reactive Force Field for Simulating Photoinitiated Acrylate Polymerization

Light-driven and photo-curable polymer based additive manufacturing (AM) has enormous potential due to its excellent resolution and precision. Acrylated radical chain-growth polymerized resins are widely used in photopolymer AM due to their fast kinetics, and often serve as a departure point for developing other resin materials for photopolymer-based AM technologies. For successful control of the photopolymer resins, the molecular basis of the acrylate free-radical polymerization has to be understood in detail. We present an optimized reactive force field (ReaxFF) for molecular dynamics (MD) simulations of acrylate polymer resins that captures radical polymerization thermodynamics and kinetics. The force field is trained against an extensive training set including density functional theory (DFT) calculations of reaction pathways along the radical polymerization from methyl acrylate to methyl butyrate, bond dissociation energies, and structures and partial charges of several molecules and radicals. We also found that it was critical to train the force field against an incorrect, nonphysical reaction pathway observed in simulations that used parameters not optimized for acrylate polymerization. As a result, the parameterization process utilizes a parallelized search algorithm, and the resulting model can describe polymer resin formation, crosslinking density, conversion rate, and residual monomers of the complex acrylate mixtures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The role of ionic blockades in controlling the efficiency of energy recovery in forward bias bipolar membranes

Limited understanding exists about the operation of bipolar membranes (BPMs) in forward bias to convert protonic gradients into electrical work, despite their emerging role in many electrochemical devices. In these device contexts, the BPM is typically exposed to complex electrolyte mixtures, but their impact on polarization remains poorly understood. Here, for this work, we develop a mechanistic model explaining the forward bias polarization behaviour of BPMs in mixed electrolytes with different acidities/basicities. This model invokes that weak acids/bases accumulate in the BPM and impose an ionic blockade that inhibits the recombination of stronger acids/bases, resulting in a substantial neutralization overpotential. We demonstrate the utility of our model for fuel cells and redox flow batteries and introduce two materials design strategies for mitigating this inhibition. Lastly, we apply our findings to enhance the energy efficiency of carbonate management in CO 2 electrolysers. This work highlights how non-equilibrium local environments at membrane–membrane interfaces can define the efficiency of protonic-to-electrical energy conversion.

25 ENERGY STORAGE↗
DOE OSTI2024

Microbial Communities in Model Seawater-Compensated Fuel Ballast Tanks: Biodegradation and Biocorrosion Stimulated by Marine Sediments

Some naval vessels add seawater to carbon steel fuel ballast tanks to maintain stability during fuel consumption. Marine sediments often contaminate ballast tank fluids and have been implicated in stimulating fuel biodegradation and enhancing biocorrosion. The impact of the marine sediment was evaluated in model ballast tank reactors containing seawater, fuel (petroleum-F76, Fischer–Tropsch F76, or a 1:1 mixture), and carbon steel coupons. Control reactors did not receive fuel. The marine sediment was added to the reactors after 400 days and incubated for another year. Sediment addition produced higher estimated bacterial numbers and enhanced sulfate reduction. Ferrous sulfides were detected on all coupons, but pitting corrosion was only identified on coupons exposed to FT-F76. Aerobic hydrocarbon-degrading bacteria increased, and the level of dissolved iron decreased, consistent with the stimulation of aerobic hydrocarbon degradation by iron. We propose that sediments provide an inoculum of hydrocarbon-degrading microbes that are stimulated by dissolved iron released during steel corrosion. Hydrocarbon degradation provides intermediates for use by sulfate-reducing bacteria and reduces the level of fuel components inhibitory to anaerobic bacteria. The synergistic effect of dissolved iron produced by corrosion, biodegradable fuels, and iron-stimulated hydrocarbon-degrading microbes is a poorly recognized but potentially significant biocorrosion mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A Simple Criterion for Feasibility of Heat Integration between Distillation Streams Based on Relative Volatilities

In a multicomponent distillation configuration, there are numerous sources and sinks of heat, and a potential way to reduce the heat duty requirement is to perform heat integration. Unfortunately, an algorithmic search of the optimal heat integration opportunities is intractable when the required temperatures of intermediate streams are computed via complex models. Instead, in this work, we introduce pressure-scaled pseudo relative volatility, a new metric to compare stream temperatures. Here, we justify the use of pseudo relative volatility by proving that this variable is a monotonically increasing function of the liquid fraction in a saturated mixture stream. Using this metric, we derive a shortcut criterion to check the feasibility of various heat integration opportunities, such as thermal coupling via heat transfer (TCH). The advantage of this approach is that it circumvents the need for explicit temperatures and instead relies on composition, component relative volatilities, and pressure—quantities that are readily available in shortcut models for optimization of distillation configurations. Leveraging this fact, we propose a new optimization framework that identifies feasible TCHs that we consider within the formulation while minimizing the total heat duty of a distillation configuration. We demonstrate, on a few examples, that our formulation can identify heat duty efficient configurations, some of which are multieffect configurations. Using this methodology, we discover configurations that are not only simpler than the fully thermally coupled (FTC) configuration but also have a much lower heat duty.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

AGR-5/6/7 Thermal Model with Non-uniform Gas Gaps

The daily as-run thermal analysis for the Advanced Gas Reactor (AGR)-5/6/7 experiment was documented in ECAR-5633 (Hawkes 2021). A finite element model was created for the entire test train, which consisted of five capsules. The fuel compacts, graphite holders, stainless-steel capsule walls, and all other major components were individually modeled, including all thermocouples (TCs). Daily heat rates for each compact and component in the model were input from daily as-run physics analyses. Daily gas compositions for each capsule were also input. The thermal conductivity of the compacts and graphite holders varied with fast neutron fluence. Gas mixture thermal conductivity was implemented using experimentally attained values from the literature. Fluence and temperature-dependent thermal conductivity was used for the graphite components and the fuel compacts. Radiation heat transfer was implemented. The model was tuned in an attempt to match the TC readings during the first cycle by adjusting the Neolube (graphite lubricant) thickness.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

KCl-UCl 3 molten salts investigated by Ab Initio Molecular Dynamics (AIMD) simulations

Ab Initio Molecular Dynamics (AIMD) simulations are performed on molten KCl-UCl3 salt mixtures to determine energies, heat capacities, and densities. The density-dependent energy correction (DFT-dDsC), Grimme et al.'s DFT-D3, and Langreth & Lundqvist (vdW-cx) models are used for dispersion forces and combined with the Perdew-Burke-Ernzerhof (PBE) exchange-correlation potential with a Hubbard U parameter for the 5f electrons of uranium. After validating predictions for the end-member systems to literature data, KCl-UCl 3 mixtures are studied at select temperatures. Densities and energies both deviate from ideal solution behavior, with the maximum deviation occurring around 36% UCl 3 for mixing energies and slightly lower (29% UCl3) for densities. Compared to the NaCl-UCl 3 system, which was previously investigated using the same simulation methodologies, the KCl-UCl 3 density and mixing energy deviations from ideal solution behavior are larger by almost a factor of two. No deviation from ideal solution behavior for heat capacity was observed. The AIMD predictions for mixing energies and densities agree qualitatively with experimental data, though the spread in data obtained from the various dispersion force models utilized, measurements, and empirical estimates makes strong conclusions difficult. The dependence of thermodynamic and thermophysical properties on composition is correlated with the local chemistry of the solution phase, in particular, the tendency of UCl 3 to form network structures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A High-Pressure Shock Tube Study of Hydrogen and Ammonia Addition to Natural Gas for Reduced Carbon Emissions in Power Generation Gas Turbines

Ignition delay times from undiluted mixtures of natural gas (NG)/H2/Air and NG/NH3/Air were measured using a high-pressure shock tube at the University of Central Florida. The combustion temperatures were experimentally tested between 1000-1500 K near a constant pressure of 25 bar. Mixtures were kept undiluted to replicate the same chemistry pathways seen in gas turbine combustion chambers. Recorded combustion pressures exceeded 200 bar due to the large energy release, hence why these were performed at the high-pressure shock tube facility. The data is compared to the predictions of the NUIGMech 1.1 mechanism for chemical kinetic model validation and refinement. An exceptional agreement was shown for stoichiometric conditions in all cases but strayed at lean and rich equivalence ratios, especially in the lower temperature regime of H2 addition and all temperature ranges of the baseline NG mixture. Hydrogen addition also decreased ignition delay times by nearly 90%, while NH3 fuel addition made no noticeable difference in ignition delay time. NG/NH3 exhibited similar chemistry to pure NG under the same conditions, which is shown in a sensitivity analysis, demonstrating hydrogen chemistry to be dominant in NG/H2 mixtures and hydrocarbon chemistry to be dominant in NG/NH3 mixtures. The reaction CH3 + O2 = CH3O + O is identified and suggested as a possible modification target to improve model performance. Increasing the robustness of chemical kinetic models via experimental validation will directly aid in designing next-generation combustion chambers for use in gas turbines, which in turn will greatly lower global emissions and reduce greenhouse effects.

Pierro, Michael↗
DOE OSTI2021

The Influence of the Instantaneous Collapse of Tailings Pond on Downstream Facilities

To evaluate the evolutionary processes guiding the formation of the tailings‐water mixtures produced by the instantaneous collapse of tailings ponds and the influence of these on downstream facilities, a 2D simulation model with reasonable boundary and working conditions derived from actual engineering practice was built in this study, and the relationship between dam‐break elevation and impact on downstream facilities was also analyzed to determine the relevant mechanism of influence. Computational results indicated that lowering the dam‐break elevation caused the maximum velocity and flooding depth, along with the flooded area at monitoring points, to gradually increase. The occurrence times of maximum velocity and flooding depth were also gradually moved forward as the breaking elevation was reduced; this effect is directly related to the increase in the total potential energy at the lower break elevations. Further simulations of sand‐prevent dams with different heights located downstream from a tailings pond were carried out to identify methods for mitigating the impact of dam failure. The results revealed that increasing the height of the sand‐prevent dam reduced the production of tailings mixtures. Based on the results, the construction of a sand‐prevent dam with a crest elevation equal to that of the starter dam was recommended.

Wang, Sha (ORCID:0000000324875445)↗
DOE OSTI2025

CFD modeling of non-catalytic, partial-oxidation engine reformer for flare mitigation

Flaring associated natural gas is commonly employed in the oil and gas industry to reduce methane (CH 4 ) emissions but generates carbon dioxide (CO 2 ) and harmful pollutants, significantly contributing to air pollution and posing risks to public health. To mitigate this impact, M2X Energy Inc. has developed a small-scale, modular gas-to-methanol system. This system features an engine reformer that performs fuel-rich partial oxidation of wellhead gas to produce syngas—a mixture of carbon monoxide (CO) and hydrogen (H 2 )—followed by a downstream reactor for methanol synthesis. This study focused on computational fluid dynamics (CFD) modeling of the engine reformer to simulate partial oxidation chemistry, predict the rich-burn operating limit, and assess syngas quality, ultimately aiding in design and operational optimization. The CFD model, developed within a Reynolds-Averaged Navier-Stokes (RANS) turbulence framework, incorporated sub-models for turbulent combustion, a chemical mechanism with polycyclic aromatic hydrocarbon (PAH) pathways, and soot emissions to accurately capture the fuel-rich, turbulent jet ignition and combustion processes. Model validation against experimental data showed good agreement across pre- and main-chamber pressures, apparent heat release rates, and exhaust gas concentrations of key species (H 2 , CO, CO 2 , CH 4 ) for varying intake equivalence ratios. Here, the model identified a rich-burn operating limit near a fuel-air equivalence ratio of 2.35, consistent with experimental observations. Furthermore, syngas quality analysis revealed that extending the rich-burn limit through engine reformer optimization could enhance syngas production, contributing to higher methanol synthesis efficiency.

Computational Fluid Dynamics↗
DOE OSTI2021

The interpenetration polymer network in a cement paste–waterborne epoxy system

The formation of the interpenetrating polymer network (IPN) structure within the cement-polymer system has been revealed by experiments from 2 dimensional to 3-dimensional scales. However, the microstructure design and performance prediction of IPN as a function of specific C-S-H/polymer components or ingredients' parameters e.g. water to cement ratios (w/c), polymer to cement ratios (p/c), monomer components, degree of polymerization (DP), etc. is by far not available. Here we developed a mesoscale model for IPN visualization based on the Flory-Huggins interaction theory which was applied to cement science for the first time. All the ingredients in the micro-structure were considered as soluble beads with rational sizes based on their properties obtained by molecular dynamic methods. The interaction parameters of each bead were then determined based on their element ratios and chemical backbones. The model was validated with the waterborne epoxy-cement material (WECM) in which a novel waterborne epoxy resin (WEP) was prepared and impregnated. The verification results on the 2D-3D scale show that the developed model predicts the WECM's IPN structures by rule and line concerning DP, w/c, and p/c in the mixture. The C-S-H beads were progressively scaled in size which alters the C-S-H texture to have completely different dissolution characteristics. Beads of diameter ~6 Å are more unstable and soluble which enable them to form a continuous phase in water or a composite structure with WEP. In contrast, beads with diameters larger than 10 Å have different properties with stronger nucleation effects. The results also suggest the impregnation content of WEP in cement-based material should be limited to 10% vol. to prevent the polymer IPN from decomposing into discrete clusters. The application of Flory-Huggins theory in cement-based composites demonstrates great potential in performance prediction and microstructure design.

36 MATERIALS SCIENCE↗
DOE OSTI2021

An experimental and kinetic modeling study of NO x sensitization on methane autoignition and oxidation

An experimental and kinetic modeling study of the influence of NO x (i.e. NO 2 , NO and N 2 O) addition on the ignition behavior of methane/‘air’ mixtures is performed. Ignition delay time measurements are taken in a rapid compression machine (RCM) and in a shock tube (ST) at temperatures and pressures ranging from 900–1500 K and 1.5–3.0 MPa, respectively for equivalence ratios of 0.5–2.0 in ‘air’. The conditions chosen are relevant to spark ignition and homogeneous charge compression ignition engine operating conditions where exhaust gas recirculation can potentially add NO x to the premixed charge. The RCM measurements show that the addition of 200 ppm NO 2 to the stoichiometric CH 4 /oxidizer mixture results in a factor of three increase in reactivity compared to the baseline case without NOx for temperatures in the range 600–1000 K. However, adding up to 1000 ppm N 2 O does not show any appreciable effect on the measurements. The promoting effect of NO 2 was found to increase with temperature in the range 950–1150 K, while the sensitization effect decreases at higher pressures. The experimental results measured are simulated using NUIGMech1.2 comprising an updated NO x sub-chemistry in this work. A kinetic analysis indicates that the competition between the reactions ĊH 3 + NO 2 ↔ CH 3 Ȯ + NO and ĊH 3 + NO 2 (+M) ↔ CH 3 NO 2 (+M), the former being a propagation reaction and the latter being a termination reaction governs NO x sensitization on CH 4 ignition. Recent calculations by Matsugi and Shiina (A. Matsugi, H. Shiina, J. Phys. Chem. A. 121 (2017) 4218–4224) for the nitromethane formation reaction CH 3 + NO 2 (+M) ↔ CH 3 NO 2 (+M), together with the recently calculated rate constants for HONO/HNO 2 reactions significantly improve ignition delay time predictions in the temperature range 600–1000 K. Furthermore, the experiments with NO addition reveal a non-monotonous sensitization impact on CH 4 ignition at lower temperatures with NO initially acting as an inhibitor at low NO concentrations and then as a promoter as NO concentrations increase in the mixture. This non-monotonous trend is attributed to the role of the chain-termination reaction ĊH 3 + NO 2 (+M) ↔ CH 3 NO 2 (+M) and the impact of NO on the transition to the chain-branching steps CH 2 O + HȮ 2 ↔ HĊO + H 2 O 2 , H 2 O 2 (+M) ↔ ȮH + ȮH (+M), HĊO ↔ CO + Ḣ followed by CO + O 2 ↔ CO 2 + Ö and Ḣ + O 2 ↔ Ö + ȮH. NUIGMech1.2 is systematically validated against the new ignition delay measurements taken here together with species measurements and high temperature ignition delay time data available in the literature for CH 4 /oxidizer mixtures diluted with NO 2 /N 2 O/NO and is observed to accurately capture the sensitization trends.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Thermophysical Properties of NaCl–UCl 3 –PuCl 3 Molten Salts: A Combined Computational and Experimental Study

Actinide-bearing molten salts for use as fuels are an essential part of next generation molten salt reactors. Yet, numerous multicomponent salt mixtures are underdeveloped or have not been investigated. Here, this study, based on a combination of experimental and modeling techniques, is dedicated to determining and understanding a variety of properties of the ternary system of NaCl–UCl 3 –PuCl 3 , which represents a scenario for burnup of NaCl–UCl 3 fuel, at two compositions (∼10 and 5 mol % PuCl 3 in eutectic NaCl–UCl 3 pseudobinary) and a range of temperatures. Evaluation of the heat flow and mass loss data showed the 0.61NaCl–0.30UCl 3 –0.09PuCl 3 salt had a melting temperature of 551 ± 5 °C. Two additional thermal effects were observed occurring at approximately 410 and 494 °C. The transition occurring at 410 °C may be due to the presence of oxide in the salt. Extrapolation of thermodynamic data indicates the transition occurring at 494 °C is due to the formation of a liquid phase. Experimental testing determined the density of this system is a linear function of temperature and can be represented by the equation ρ = 4.014–0.0010T(°C), R 2 = 0.992. Additionally, by using atomistic modeling, we found that increasing the PuCl 3 content from 5 to 10 mol % led to the formation of larger Pu 3+ clusters and slower transport of ions.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Second-generation dust in planetary systems: the case of HD 163296

Observations indicate that large, dust-laden protoplanetary discs are common. Some features, like gaps, rings, and spirals, suggest they may host young planets, which can excite the orbits of nearby leftover planetesimals. Energetic collisions among these bodies can lead to the production of second-generation dust. Grains produced by collisions may have a dynamical behaviour different from that of first-generation, primordial dust out of which planetesimals and planets formed. Here, we aim to study these differences for the HD 163296 system and determine whether dynamical signatures in the mixture of the two dust populations can help separate their contributions. We use three-dimensional (3D) hydrodynamic models to describe the gaseous disc with three, Saturn- to Jupiter-mass, embedded planets. Dust grains, of sizes $1\, \mu \mathrm{m}$–$1\, \mathrm{mm}$, are treated as Lagrangian particles with resolved thermodynamics and mass-loss. Initial disc and planet configurations are derived from observation-based work, which indicates low gas viscosity. The 3D approach also allows us to detect the formation of vortices induced by Rossby waves, where dust becomes concentrated and may contribute to planetesimal formation. We find that the main differences in the dynamical behaviour of first- and second-generation dust occur in the vertical distribution. The two populations have similar distributions around the disc mid-plane, although second-generation dust shows longer residence times close to the radial locations of the planets’ gas gaps. Sedimentation rates of $\mu$m-sized grains are comparable to or lower than the production rates by planetesimals’ collisions, making this population potentially observable. These outcomes can be extended to similar systems harbouring giant planets.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Large spin splittings due to the orbital degree of freedom and spin textures in a ferroelectric nitride perovskite

First-principles simulations are conducted to predict that ferroelectric nitride perovskite LaWN 3 not only exhibits large spin splittings (2.7 eV Å) but also possesses unique spin textures for some of its conduction levels. Such spin splittings around the Γ and L points cannot be interpreted as a typical mixture of Rashba or Dresselhaus configurations but rather require the development of four-band $\textit{k ∙ p}$ models with high-order terms. We further identify that, for some bands, spin splittings can be greatly contributed by the pure orbital degree of freedom (PODF), a unique character of our four-band Hamiltonian compared to the traditional two-band version. The concept of PODF-enhanced spin splittings paves a way for designing materials with large spin splittings. Moreover, the energy levels possessing such large splittings and complex spin textures can be brought close to the conduction-band minimum by applying epitaxial strain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Polymers in Deep Eutectic Solvents

The project investigated the behavior of polymers in ionic liquids such as deep eutectic solvents using an array of techniques. These included the development of atomistic force fields, coarse graining these force fields to the united atom level, large scale molecular dynamics (MD) simulations using new thermostat algorithms, and machine learning (ML) methods for the phase behavior. The project demonstrated the feasibility and accuracy of first principles force fields for ionic liquids, deep-eutectic solvents, and urea-water mixtures. A novel hierarchical coarse graining method was then used to develop accurate and efficient united-atom models, using which microsecond simulations were performed for polymers in ionic liquids. These simulations were in quantitative agreement with experiment, thus resolving previous controversies. Methods were also developed to obtain the potential of mean force between complex ions in solution. Finally, supervised ML methods were developed for the phase behavior of polymers in ionic liquids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗