Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mg”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

On the elastic anisotropy of the entropy-stabilized oxide (Mg, Co, Ni, Cu, Zn)O compound

Herein, we study the elastic properties of the entropy-stabilized oxide (Mg, Co, Ni, Cu, Zn)O using experimental and first principles techniques. Our measurements of the indentation modulus on grains with a wide range of crystallographic orientations of the entropy-stabilized oxide revealed a high degree of elastic isotropy at ambient conditions. First principles calculations predict mild elastic anisotropy for the paramagnetic structure, which decreases when the system is considered to be non-magnetic. When the antiferromagnetic state of CoO, CuO, and NiO is accounted for in the calculations, a slight increase in elastic anisotropy is observed, suggesting a coupling between magnetic ordering and the orientation dependent elastic properties. Furthermore, an examination of the local structure reveals that the isotropy is favored through local ionic distortions of Cu and Zn—due to their tendencies to form tenorite and wurtzite phases. The relationships between the elastic properties of the multicomponent oxide and those of its constituent binary oxides are reviewed. These insights open up new avenues for controlling isotropy for technological applications through tuning composition and structure in the entropy-stabilized oxide or the high-entropy compounds in general.

Entropy↗

Lateral and vertical growth of Mg-doped GaN on trench-patterned GaN films

Growth of Mg-doped GaN on trench-patterned GaN films consists of competing lateral and vertical growth fronts that result in regions with different electronic properties. Under typical growth conditions, lateral growth from the trench sidewall occurs at a faster rate than vertical growth from the trench base. When the trench width is sufficiently narrow, the growth fronts from opposite sidewalls coalesce and lead to eventual planarization of the top surface. Secondary electron imaging and cathodoluminescence mapping are used to correlate the morphology and the optical properties of regions resulting from lateral and vertical growth. For our growth conditions, the lateral-to-vertical growth rate ratio is found to be about 2.

Su, Po-Yi (ORCID:000000018339783X)↗

Pressure-induced suppression of Jahn–Teller distortions and enhanced electronic properties in high-entropy oxide (Mg 0.2 Ni 0.2 Co 0.2 Zn 0.2 Cu 0.2 )O

Jahn–Teller distortions are often observed in Cu II -containing complex oxides resulting in remarkable changes of physical properties. Tuning the Jahn–Teller distortions with pressure has attracted considerable interest but is less studied in Cu II -containing high-entropy oxides (HEOs). We found that pressure can suppress the structural distortions originating from the Jahn–Teller effect of CuO 6 octahedra in the rock salt-type (Mg 0.2 Ni 0.2 Co 0.2 Zn 0.2 Cu 0.2 )O HEO and significantly modify its electronic properties. Synchrotron x-ray diffraction shows that the structural distortions arising from the Jahn–Teller effect of CuO 6 octahedra are progressively suppressed, and the distorted structure evolves into a nearly ideal form under compression. Alternating current impedance and ultraviolet-visible absorption measurements reveal a dramatic resistance drop by more than three orders of magnitude and an obvious bandgap decrease in ~0.1 eV, respectively, accompanied by the pressure-induced suppression of structural distortions. Our study presents a promising route for tuning the structural distortions and the electronic structures of Cu II -containing HEOs for optimizing materials functionalities.

36 MATERIALS SCIENCE↗

The many-body expansion for metals. I. The alkaline earth metals Be, Mg, and Ca

We examine the many-body expansion (MBE) for alkaline earth metal clusters, Be n , Mg n , Ca n ( n = 4, 5, 6), at the Møller–Plesset second order perturbation theory, coupled-cluster singles and doubles with perturbative triples, multi-reference perturbation theory, and multi-reference configuration interaction levels of theory. The magnitude of each term in the MBE is evaluated for several geometrical configurations. We find that the behavior of the MBE for these clusters depends strongly on the geometrical arrangement and, to a lesser extent, on the level of theory used. Another factor that affects the MBE is the in situ (ground or excited) electronic state of the individual atoms in the cluster. For most geometries, the three-body term is the largest, followed by a steady decrease in absolute energy for subsequent terms. Though these systems exhibit non-negligible multi-reference effects, there was little qualitative difference in the MBE when employing single vs multi-reference methods. Useful insights into the connectivity and stability of these clusters have been drawn from the respective potential energy surfaces and quasi-atomic orbitals for the various dimers, trimers, and tetramers. Through these analyses, we investigate the similarities and differences in the binding energies of different-sized clusters for these metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

(Cd,Mg)Te crystals for picosecond-response optical-to-x-ray radiation detectors

We demonstrate a photodetector sensitive to both optical and x-ray picosecond pulses based on our in-house grown cadmium magnesium telluride (Cd,Mg)Te single crystal. Specifically, we developed In-doped Cd0.96Mg0.04Te material and discuss its femtosecond optical photoresponse, as well as the detector performance, such as <100-pA dark current and up to 0.22-mA/W responsivity for 780-nm wavelength optical radiation. The detector exposed to Ti fluorescence (K alpha) x-ray pulses at 4.5 keV, generated by a free-electron laser beam with the central energy of 9.8 keV and <100 fs pulse width, exhibited readout-electronics-limited 200-ps full-width-at-half-maximum photoresponse, demonstrating that it is suitable for coarse timing in free-electron laser x-ray/optical femtosecond pump–probe spectroscopy applications.

Instruments & Instrumentation↗

Vascular K ATP channel structural dynamics reveal regulatory mechanism by Mg-nucleotides

Vascular tone is dependent on smooth muscle K ATP channels comprising pore-forming Kir6.1 and regulatory SUR2B subunits, in which mutations cause Cantú syndrome. Unique among K ATP isoforms, they lack spontaneous activity and require Mg-nucleotides for activation. Structural mechanisms underlying these properties are unknown. Here, we determined cryogenic electron microscopy structures of vascular K ATP channels bound to inhibitory ATP and glibenclamide, which differ informatively from similarly determined pancreatic K ATP channel isoform (Kir6.2/SUR1). Unlike SUR1, SUR2B subunits adopt distinct rotational “propeller” and “quatrefoil” geometries surrounding their Kir6.1 core. The glutamate/aspartate-rich linker connecting the two halves of the SUR-ABC core is observed in a quatrefoil-like conformation. Molecular dynamics simulations reveal MgADP-dependent dynamic tripartite interactions between this linker, SUR2B, and Kir6.1. The structures captured implicate a progression of intermediate states between MgADP-free inactivated, and MgADP-bound activated conformations wherein the glutamate/aspartate-rich linker participates as mobile autoinhibitory domain, suggesting a conformational pathway toward K ATP channel activation.

59 BASIC BIOLOGICAL SCIENCES↗

An idealized model for the crystal structure of intermetallic compounds isostructural with Mg 3 Cr 2 Al 18

Mg 3 Cr 2 Al 18 (abbreviated in this report as MCA) is the parent phase for a large class of intermetallic compounds that belong to the cubic crystal space group, $Fd\overline{3}m$. The purpose of this paper is to introduce an ideal, unrelaxed crystal structure for compounds isostructural with MCA. There are five distinct atomic sublattices in MCA compounds, which can be denoted, $A, B, C, D,$ and $E$. With this, a general description for MCA structures can be written as $A^{8a}_{1}B^{16c}_{2}C^{16d}_{2}D^{48f}_{6}E^{96g}_{12}$, where the superscripts represent the Wyckoff special equipoints associated with the various sublattices in MCA, and the subscripts indicate the contributions of each sublattice to the stoichiometry of one formula unit in an any given MCA structured compound. Sublattices D and E are where deviations from ideality occur in real, MCA-like compounds. This paper examines MCA bond lengths, nearest-neighbour polyhedral arrangements, 3-D sublattice crystal structures, 2-D atom tessellation patterns, and crystal chemical effects associated with atomic relaxations on the $D$ and $E$ sublattices. The ideal MCA crystal structure developed in this report provides an appropriate initial structure for use as input to crystal structure refinements of diffraction data for MCA-like phases being examined experimentally, or as input for computational, atomistic simulations of the structures of such compounds.

36 MATERIALS SCIENCE↗

Mg x Zn 1−x O contact to CuGa 3 Se 5 absorber for photovoltaic and photoelectrochemical devices

Abstract CuGa 3 Se 5 is a promising candidate material with wide band gap for top cells in tandem photovoltaic and photoelectrochemical (PEC) devices. However, traditional CdS contact layers used with other chalcopyrite absorbers are not suitable for CuGa 3 Se 5 due to the higher position of its conduction band (CB) minimum. Mg x Zn 1− x O (MZO) is a transparent oxide with adjustable band gap and CB position as a function of magnesium composition, but its direct application is hindered by CuGa 3 Se 5 surface oxidation. Here, MZO is investigated as a contact (n-type ‘buffer’ or ‘window’) material to CuGa 3 Se 5 absorbers pretreated in Cd 2+ solution, and an onset potential close to 1 V vs reversible hydrogen electrode in 10 mM hexaammineruthenium (III) chloride electrolyte is demonstrated. The Cd 2+ surface treatment changes the chemical composition and electronic structure of the CuGa 3 Se 5 surface, as demonstrated by photoelectron spectroscopy measurements. The performance of CuGa 3 Se 5 absorber with Cd 2+ treated surface in the solid-state test structure depends on the Zn/Mg ratio in the MZO layer. The measured open circuit voltage of 925 mV is promising for tandem PEC water splitting with CuGa 3 Se 5 /MZO top cells.

36 MATERIALS SCIENCE↗

Evidence for C and Mg variations in the GD-1 stellar stream

ABSTRACT Dynamically cold stellar streams are the relics left over from globular cluster dissolution. These relics offer a unique insight into a now fully disrupted population of ancient clusters in our Galaxy. Using a combination of Gaia eDR3 proper motions, optical and near-UV colours, we select a sample of likely Red Giant Branch stars from the GD-1 stream for medium-low resolution spectroscopic follow-up. Based on radial velocity and metallicity, we are able to find 14 new members of GD-1, 5 of which are associated with the spur and blob/cocoon off-stream features. We measured C-abundances to probe for abundance variations known to exist in globular clusters. These variations are expected to manifest in a subtle way in globular clusters with such low masses ($\sim 10^4\,{\rm ~\textrm {M}_\odot }$) and metallicities ([Fe/H] ∼ −2.1 dex). We find that the C-abundances of the stars in our sample display a small but significant (3σ level) spread. Furthermore, we find ∼3σ variation in Mg-abundances among the stars in our sample that have been observed by APOGEE. These abundance patterns match the ones found in Galactic globular clusters of similar metallicity. Our results suggest that GD-1 represents another fully disrupted low-mass globular cluster where light-element abundance spreads have been found.

79 ASTRONOMY AND ASTROPHYSICS↗

OzDES Reverberation Mapping Program: Stacking analysis with Hβ, Mg ii , and C iv

ABSTRACT Reverberation mapping is the leading technique used to measure direct black hole masses outside of the local Universe. Additionally, reverberation measurements calibrate secondary mass-scaling relations used to estimate single-epoch virial black hole masses. The Australian Dark Energy Survey (OzDES) conducted one of the first multi-object reverberation mapping surveys, monitoring 735 AGN up to z ∼ 4, over 6 years. The limited temporal coverage of the OzDES data has hindered recovery of individual measurements for some classes of sources, particularly those with shorter reverberation lags or lags that fall within campaign season gaps. To alleviate this limitation, we perform a stacking analysis of the cross-correlation functions of sources with similar intrinsic properties to recover average composite reverberation lags. This analysis leads to the recovery of average lags in each redshift-luminosity bin across our sample. We present the average lags recovered for the Hβ, Mg ii, and C iv samples, as well as multiline measurements for redshift bins where two lines are accessible. The stacking analysis is consistent with the Radius–Luminosity relations for each line. Our results for the Hβ sample demonstrate that stacking has the potential to improve upon constraints on the R–L relation, which have been derived only from individual source measurements until now.

79 ASTRONOMY AND ASTROPHYSICS↗

Preliminary Thermoluminescent Dosimeter Glow Curve Analysis with Automated Glow Peak Identification for LiF Mg,Ti

When appropriately analyzed, thermoluminescent dosimeter glow curve analysis allows for improved quantification of thermoluminescent material behavior while flagging abnormalities. The mathematical separation of a glow curve into contributions from energetically unique trap states, or glow curve analysis, may be used to remove undesired effects of signal fading for complex materials. A generalized glow curve analysis software for the separation of glow curves is presented in this paper. Written in C ++ , the software uses the first-order kinetics model with automatic peak identification. The automatic identification of peaks is achieved through a unique peak-finding algorithm. Here, the program was performance tested using experimental glow curve data from LiF:Mg,Ti, and comparative results are presented.

47 OTHER INSTRUMENTATION↗

Shock melting and the hcp-bcc phase boundary of Mg under dynamic loading

The high-temperature and high-pressure response of magnesium has been investigated through shock-release experiments performed up to shock melting. The longitudinal and bulk sound speeds of Mg are reported along the Hugoniot from 25 to 56 GPa and used to determine the elastic properties and Grüneisen parameter. The hexagonal close-packed (hcp)–body-centered cubic (bcc) phase transition is marked by a reduction in the determined shear wave speed. Thermal softening is observed to begin between 40 and 44 GPa, with incipient melt at 55.5 GPa, in close agreement with previous diffraction measurements under laser shock loading. Examination of the release profiles showed that two different responses were observed, depending on the peak stress. When plotted in a stress-energy phase diagram, the two responses are observed to form separate lines that intersect the static hcp-bcc phase transition and incipient melt. The results indicate that the hcp-bcc transition occurs on the Hugoniot at 28.4 GPa and place the hcp-bcc-liquid triple point ~20 GPa. In conclusion, a multiphase equation of state is developed which places the melt boundary below the previously reported static measurements.

36 MATERIALS SCIENCE↗

Angular-momentum projection in coupled-cluster theory: Structure of 34 Mg

Single- reference coupled-cluster theory is an accurate and affordable computational method for the nuclear many-body problem. For open-shell nuclei, the reference state typically breaks rotational invariance and angular momentum must be restored as a good quantum number. We perform angular-momentum projection after variation and employ the disentangled coupled-cluster formalism and a Hermitian approach. We compare our results with benchmarks for 8 Be and 20 Ne using a two-nucleon interaction from chiral effective field theory and for pf-shell nuclei within the traditional shell model. We compute the rotational band in the exotic nucleus 34 Mg and find agreement with data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Revised decay properties of the key 93-keV resonance in the Mg 25 ( p , γ ) reaction and its influence on the MgAl cycle in astrophysical environments

The γ-decay properties of an excited state in 26 Al at 6398.3(8) keV have been reexamined using the 11 B+ 16 O fusion-evaporation reaction. This level represents a key 93.1(8)-keV resonance in the 25 Mg+p system and its relative branching to the 26 Al ground state, f 0 , has been determined to be 0.76 ± 0.03 (stat.) ± 0.10 (syst.). Furthermore, this is a significantly higher value than the most recent evaluation and implies a considerable increase in the production of cosmic γ rays from 26 Al radioactivity.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

𝛽 decay of 36 Mg and 36 Al: Identification of a 𝛽-decaying isomer in 36 Al

The level structure of 36 Al has been studied via 𝛽 decay of 36 Mg at the Facility for Rare Isotope Beams (FRIB) and the National Superconducting Cyclotron Laboratory (NSCL). A long-lived isomer in 36 Al was identified which decays by 𝛽 to an excited state of 36 Si. The ground state and the isomeric state of 36 Al were found to populate different energy levels of 36 Si. Furthermore, the results from the two data sets in the present work complement each other. Configuration interaction calculations performed with the FSU shell-model Hamiltonians provide reasonable descriptions to the experimental observations and offer insight into future improvements of the theoretical interpretation.

20 ≤ A ≤ 38↗

Structure of odd-mass Ne, Na, and Mg nuclei

The island of inversion is a region of neutron-rich nuclei around 31 Na that are deformed in their ground states. In this region, less is known about the energy levels of odd-mass nuclei, how they evolve with increasing neutron numbers, and how they can be organized into rotational bands. We perform ab initio coupled-cluster calculations of spectra in odd-mass Ne, Na, and Mg nuclei based on an interaction of chiral effective field theory. In conclusion, our results confirm some tentative spin and parity assignments, predict the structure of nuclei near the neutron dripline, and inform us about rotational bands in this region of the nuclear table.

20 ≤ A ≤ 38↗

Quadratic Zeeman effect in hydrogen at 2–3 MG magnetic fields

The Zeeman effect is used for measurement of magnetic fields in astrophysical and laboratory plasmas. Magnetic fields in atmospheres of magnetic white dwarf stars are in the range 40 kG–1 GG. The quadratic Zeeman effect results in the additional split and shift of lines for magnetic fields >2 MG. Hydrogen Balmer lines were studied in magnetic fields delivered by a 1 MA pulse power generator. The magnetic field was generated by rod loads 0.8–1 mm in diameter. A droplet of CH oil on the load center was the source of hydrogen. A low ionized oil layer was backlit by blackbody emission from the rod with a temperature of 0.5–0.6 eV. Zeeman splitting of H-alpha and H-beta absorption lines were with a grating spectrometer. A spectral shift of the central component of the triplet indicated the quadratic Zeeman effect in hydrogen lines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dielectronic satellite emission from a solid-density Mg plasma: Relationship to models of ionization potential depression

Here, we report on experiments where solid-density Mg plasmas are created by heating with the focused output of the Linac Coherent Light Source x-ray free-electron laser. We study the K-shell emission from the helium- and lithium-like ions using Bragg crystal spectroscopy. Observation of the dielectronic satellites in lithium-like ions confirms that the M-shell electrons appear bound for these high charge states. An analysis of the intensity of these satellites indicates that when modeled with an atomic-kinetics code, the ionization potential depression model employed needs to produce depressions for these ions which lie between those predicted by the well known Stewart-Pyatt and Ecker-Kroll models. These results are largely consistent with recent density functional theory calculations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗