SEARCH · Engineering Papers

Results for “Matched”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Minimum Bayes risk image correlation

In this paper, the problem of designing a matched filter for image correlation will be treated as a statistical pattern recognition problem. It is shown that, by minimizing a suitable criterion, a matched filter can be estimated which approximates the optimum Bayes discriminant function in a least-squares sense. It is well known that the use of the Bayes discriminant function in target classification minimizes the Bayes risk, which in turn directly minimizes the probability of a false fix. A fast Fourier implementation of the minimum Bayes risk correlation procedure is described.

Minter, T. C., Jr.↗

NASA NTRS1980

Simulation of spacecraft charging environments by monoenergetic beams

To simulate the distributed spectra of plasmas in space, the differential current density spectrum of the plasma was divided into a number of energy bands and the beam energy and current were calculated for each band to provide a piecewise reproduction of the distributed spectrum. Beam energies and current densities were chosen to match the velocity moments of the plasma distribution function. The velocity moments are averages related to physical quantities such as particle density, flux, pressure, and energy flux, and have been used extensively to characterize the measured properties of plasmas in space. Combinations of one, two, and three beams were found to match two to six velocity moments of Maxwellian distributions. A computational model was used to compare the charging of a spacecraft by plasmas with distributed spectra and by monoenergetic beams.

Halverson, W.↗

NASA NTRS1982

Research in millimeter wave techniques

Subharmonically pumped mixers were ascended and tested. A computerized version of the automatic noise figure measurement system was developed. Impedance matching techniques suitable for these types of mixers were investigated. Narrow and broadband (one octave) matching networks for the subharmonic mixers were designed. The automatic mixer noise figure test facility was completed. Subharmonic mixers and the systems that use them at 183 and 220 GHz were evaluated and characterized.

Forsythe, R. E.↗

NASA NTRS1982

Applications of perturbation techniques

Two perturbation techniques were applied to two singular perturbation problems in heat transfer to obtain uniformly valid solutions which can serve as benchmarks for finite difference and finite element techniques. In the first problem, the method of strained parameters coupled with the application of a solvability condition is used to obtain a uniform solution for the problem of unsteady heat conduction in a long nearly circular cylinder. In the second problem, the method of matched asymptotic expansion coupled with Van Dyke's matching principle is used to obtain a uniform solution for the problem of one dimensional conduction-convection heat transfer of a uniform fluid flow.

Kandil, O. A.↗

NASA NTRS1982

An adaptive tracking observer for failure-detection systems

The design problem of adaptive observers applied to linear, constant and variable parameters, multi-input, multi-output systems, is considered. It is shown that, in order to keep the observer's (or Kalman filter) false-alarm rate (FAR) under a certain specified value, it is necessary to have an acceptable proper matching between the observer (or KF) model and the system parameters. An adaptive observer algorithm is introduced in order to maintain desired system-observer model matching, despite initial mismatching and/or system parameter variations. Only a properly designed adaptive observer is able to detect abrupt changes in the system (actuator, sensor failures, etc.) with adequate reliability and FAR. Conditions for convergence for the adaptive process were obtained, leading to a simple adaptive law (algorithm) with the possibility of an a priori choice of fixed adaptive gains. Simulation results show good tracking performance with small observer output errors and accurate and fast parameter identification, in both deterministic and stochastic cases.

Sidar, M.↗

NASA NTRS1981

Geological and geothermal investigations for HCMM-derived data

An attempt was made to match HCMM- and U2HCMR-derived temperature data over two test sites of very local size to similar data collected in the field at nearly the same times. Results indicate that HCMM investigations using resolutions cells of 500 m or so are best conducted with areally-extensive sites, rather than point observations. The excellent quality day-VIS imagery is particularly useful for lineament studies, as is the DELTA-T imagery. Attempts to register the ground observed temperatures (even for 0.5 sq mile targets) were unsuccessful due to excessive pixel-to-pixel noise on the HCMM data. Several computer models were explored and related to thermal parameter value changes with observed data. Unless quite complex models, with many parameters which can be observed (perhaps not even measured (perhaps not even measured) only under remote sensing conditions (e.g., roughness, wind shear, etc) are used, the model outputs do not match the observed data. Empirical relationship may be most readily studied.

Lyon, R. J. P.↗

NASA NTRS1982

Design of analytical failure detection using secondary observers

The problem of designing analytical failure-detection systems (FDS) for sensors and actuators, using observers, is addressed. The use of observers in FDS is related to the examination of the n-dimensional observer error vector which carries the necessary information on possible failures. The problem is that in practical systems, in which only some of the components of the state vector are measured, one has access only to the m-dimensional observer-output error vector, with m or = to n. In order to cope with these cases, a secondary observer is synthesized to reconstruct the entire observer-error vector from the observer output error vector. This approach leads toward the design of highly sensitive and reliable FDS, with the possibility of obtaining a unique fingerprint for every possible failure. In order to keep the observer's (or Kalman filter) false-alarm rate under a certain specified value, it is necessary to have an acceptable matching between the observer (or Kalman filter) models and the system parameters. A previously developed adaptive observer algorithm is used to maintain the desired system-observer model matching, despite initial mismatching or system parameter variations. Conditions for convergence for the adaptive process are obtained, leading to a simple adaptive law (algorithm) with the possibility of an a priori choice of fixed adaptive gains. Simulation results show good tracking performance with small observer output errors, while accurate and fast parameter identification, in both deterministic and stochastic cases, is obtained.

Sisar, M.↗

NASA NTRS1982

Radiation from an open-ended waveguide with beam equalizer - A spectral domain analysis

A septum and an impedance matching post are used as a beam equalizer in an open-ended waveguide feed for reflectors used in satellite communications systems. The performance of this design over a frequency band is evaluated using a spectral domain approach. The computed radiation patterns in the E- and H-planes, as well as the results for the impedance match are presented.

Ko, W. L.↗

NASA NTRS1982

When are spectral reflectance curves comparable

Spectral reflectance curves of flat laboratory samples of the carbonaceous chondrite Allende, a basalt, and the ordinary chondrite Bruderheim measured in a bidirectional geometry are shown to differ from those measured using an integrating sphere. In general, reflectance curves obtained by the bidirectional method are redder than those obtained with an integrating sphere. The degree of difference increases with increasing absolute reflectance. When spectral reflectance curves obtained by the two methods are compared to the reflectance curves expected for spherical and aspherical planets covered with the same materials, it is found that in general the integrating sphere measurements provide a better match to a planet at small phase angles. As the phase angle increases, bidirectional reflectance curves provide a closer match.

Gradie, J.↗

NASA NTRS1982

Acoustic propagation in a rigid torus

The acoustic propagation in a rigid torus is analyzed using a Green's function method. Three types of surface elements are developed; a flat quadrilateral element used in modeling polygonal cavities, a curved conical element appropriate for surfaces with one curvature, and a toroidal element developed for such doubly curved surfaces as the torus. Curved elements are necessary since the acoustic pressure is sensitive to slope discontinuities between consecutive surface elements especially near cavity resonances. The acoustic characteristics of the torus are compared to those of a bend of square cross section for a frequency range that includes the transverse acoustic resonance. Two equivalences between the different sections are tested; the first conserves curvature and cross-sectional dimension while the second matches transverse resonance and duct volume. The second equivalence accurately matches the acoustic characteristics of the torus up to the cutoff frequency corresponding to a mode with two circumferential waves.

El-Raheb, M.↗

NASA NTRS1982

Phase shift errors in the theory and practice of surface intensity measurements

The surface acoustical intensity method (sometimes known as the microphone-accelerometer cross-spectral method) is a relatively new noise source/path identification tool. Several researchers have had difficulties implementing this method because of instrumentation phase mis-match. A simple technique for measuring and correcting instrumentation phase mis-match has been developed. This new technique has been tested recently on a noise source identification problem of practical interest. The results of the experiments indicate that the surface acoustic intensity method produces reliable data and can be applied to a variety of noise source/path problems.

Mcgary, M. C.↗

NASA NTRS1982

Fabrication of advanced composites

Fabrication techniques for manufacturing advanced composite structures with continuous and short filaments in desired orientations and consolidation within the plies of the structure are described and analyzed. Attention is given to vacuum bag molding, autoclave molding, matched die consolidation of B/Al, B/epoxy, and graphite/epoxy composites, matched die molding of chopped fiber prepregs, thermal expansion molding, braiding, filament winding, sandwich fabrication, and pultrusions. Step-by-step preparation of resin-matrix composites is detailed, including automatic and semiautomatic lay-ups, and problems of quality control are discussed. The review is intended as an engineering aid for choices between competitive designs, and comprises factors other than technical features alone, such as cost effectiveness, ease of inspection, and economics of maintenance.

Meade, L. E. R.↗

NASA NTRS1981

Near optimum delay-line detection filters for serial detection of MSK signals

A method for designing transversal delay-line filter approximations to the matched filter for the serial detection of minimum-shift keyed (MSK) modulated signals is given. Two configurations are characterized in terms of signal-to-noise ratio degradation at a bit error rate (BER) of 10 to the -6th. One is shown to depart less than 0.3 dB from the ideal matched filter performance when its parameter values are optimized. A lumped-element equivalent is also given and shown to provide a degradation of less than 0.4 dB at a BER of 10 to the -6th

Ziemer, R. E.↗

NASA NTRS1982

The Delta-K ocean wave spectrometer - Aircraft measurements and theoretical system analysis

Measurements of the relative strength of ocean surface wave spectral components have been made from an aircraft using the two-frequency microwave resonance technique. A coherent Ku-band radar was used to study the Bragg type resonance matching (at the difference frequency Delta-f) to the surface wave components. The spatial spectrum of the surface reflectivity modulation was then computed as the value of Delta-f was varied over a matching range of approximately 15 150 m in surface wavelength. This paper contains experimental results from flights conducted during the 1979 MARSEN project and the 1980 ARSLOE project, and the objective here is to present the radar results in terms of the variety of surface illumination geometries encountered. It will be shown that the MARSEN results, with the narrow footprint, are consistent with a one-dimensional theoretical approach and that the ARSLOE results, with a symmetric beam pattern, agree well with the existing two-dimensional theory.

Weissman, D. E.↗

NASA NTRS1985

Equation for Electrolyte Viscosity

Equation agrees with measurements over wide concentration range. Plot of calculated values from equation and measured values show close match except at extremely low concentrations of electrolyte. Other equations do not match data as well and limited to dilute solutions.

Fedors, R. F.↗

NASA NTRS1983

Study of LANDSAT-D thematic mapper performance as applied to hydrocarbon exploration

Activities in support of thematic mapper "A'-tape analysis, field work in the Cement-Velma, Oklahoma areas, and continued interpretation and assessment of imagery of various test sites are reported. The objectives of the A-tape analysis are: (1) to examine the radiometric loss of data quality introduced by resampling to P-tape format; (2) to seek a better distriping of the image by replacing the NASA matching of radiometry to on-board calibration data with an EarthSat matching of the histograms for each of the sixteen detectors, processing separately for forward and backward scanner sweeps; and (3) to produce an image with improved appearance and improved radiometeric qualities.

Source record↗

NASA NTRS1984

Two dimensional nonlinear analysis of sound transmission through a near-sonic throat flow

A two-dimensional nonlinear theory of sound transmission through a nonuniform duct carrying a near-sonic throat flow is described. The mean flow in the duct is treated according to a generalized quasi-one dimensional model, and the analysis of the unsteady perturbations is carried out using the Method of Matched Asymptotic Expansions. The linearized acoustic field in the subsonic regions of the duct is approximated by a Wave Envelope model which is matched asymptotically with a nonlinear inner solution valid in the near-sonic throat region. Numerical results are presented to illustrate the predictions of the theory. It is found that, in general, shock waves develop in the acoustic field during transmission through the near-sonic flow. Unlike previous one-dimensional theories, the current study shows that dispersion can play a major role in the propagation process.

Myers, M. K.↗

NASA NTRS1982

Validating CAR - A comparison study of experimentally-derived and computer-generated reach envelopes

In the present investigation, Crewstation Assessment of Reach (CAR) results in the form of male hand reach envelopes were generated and compared with an anthropometric survey performed by Kennedy (1978) to determine the extent of the validity of the CAR model with respect to experimentally-derived anthropometric data. The CAR-generated reach envelopes extensively matched the Kennedy envelopes. The match was particularly good in the areas to the front and side from which the reach originated. Attention is given to the crewstation model, the operator sample population, the CAR analysis, aspects of validation methodology, and the modeling of experimental parameters.

Harris, R.↗