Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MULTIPLICATION FACTORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

A theoretical index for understanding distinct land relative humidity trends in observations, reanalyses, and models

Land surface relative humidity (RH) is a key variable in the coupled land–atmosphere system that profoundly influences terrestrial hydroclimate and ecosystems. Yet historical changes in land RH are not well understood due to limited observations, biased reanalyses, and the lack of a framework for interpreting RH changes under multiple influencing factors. Here, we show that the spatiotemporal variability of land RH and its distinct historical trends among observations, reanalyses, and Earth system models are captured by a simple index based on the ratio of precipitation (P) to a modified potential evapotranspiration formulated independently of RH (PET°). The index provides a physical calibration of biased land RH in reanalyses and a quantitative framework for interpreting land RH changes. Over 1973–2024, land RH has decreased substantially, owing to the intrinsic rise in PET° with temperature and little increase in land precipitation. Reanalyses overestimate the observed RH decrease, consistent with exaggerated surface warming and precipitation decline. The index captures this coherent bias and enables a calibration using observed precipitation and temperature. Models simulate a wide range of land RH trends, but nearly all runs underrepresent the historical drying. The index captures the model spread and discrepancy and attributes them to contributions of precipitation and PET°. Weaker land RH decreases in models arise mainly from weaker subtropical precipitation declines, linked to muted intensification of subtropical highs and biased subtropical climatology. The model–observation discrepancy is unlikely explained by internal variability, implying model underestimation of forced RH decrease and a drier land future than current projections.

Earth system models↗

Low-energy magnons in the chiral ferrimagnet Cu 2 OSeO 3 : A coarse-grained approach

We report a comprehensive neutron scattering study of low energy magnetic excitations in the breathing pyrochlore helimagnetic Cu2OSeO3. Fully documenting the four lowest energy magnetic modes that leave the ferrimagnetic configuration of the “strong tetrahedra” intact (| ℏ ω| < 13 meV), we find gapless quadratic dispersion at the Γ point for energies above 0.2 meV, two doublets separated by 1.6(2) meV at the R point, and a bounded continuum at the X point. Our constrained rigid spin cluster model relates these features to Dzyaloshinskii-Moriya (DM) interactions and the incommensurate helical ground state. Combining conventional spin wave theory with a spin cluster form factor accurately reproduces the measured equal time structure factor through multiple Brillouin zones. An effective spin Hamiltonian describing complex anisotropic intercluster interactions is obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of neutron multiplication coefficients for fuel elements irradiated by spallation neutrons

A neutron multiplication coefficient, k{sub eff}, has been estimated for spallation neutron flux using the data of spectrum average cross sections of all absorption, fission, and nonelastic reaction channels of {sup 232}Th, {sup 238}U, {sup 235}U, and {sup 233}U fuel elements. It has been revealed that in spallation neutron flux (i) nonfission, nonabsorption reactions play an important role in the calculation of k{sub eff}, (ii) one can obtain a high value of k{sub eff} even for fertile {sup 232}Th fuel, which is hardly possible in a conventional fast reactor, and (iii) spectrum average absorption cross sections of neutron poisons of a conventional reactor are relatively very small.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Bose-Einstein correlations in $pp, p\mathrm{Pb}$, and PbPb collisions at $\sqrt{{s}_{NN}}=0.9-7$ TeV

Quantum-statistical (Bose-Einstein) two-particle correlations are measured in pp collisions at s=0.9, 2.76, and 7 TeV, as well as in pPb and peripheral PbPb collisions at nucleon-nucleon center-of-mass energies of 5.02 and 2.76 TeV, respectively, using the CMS detector at the Large Hadron Collider. Separate analyses are performed for same-sign unidentified charged particles as well as for same-sign pions and kaons identified via their energy loss in the silicon tracker. The characteristics of the one-, two-, and three-dimensional correlation functions are studied as functions of the pair average transverse momentum (kT) and the charged-particle multiplicity in the event. For all systems, the extracted correlation radii steadily increase with the event multiplicity, and decrease with increasing kT. The radii are in the range 1–5 fm, the largest values corresponding to very high multiplicity pPb interactions and to peripheral PbPb collisions with multiplicities similar to those seen in pPb data. It is also observed that the dependencies of the radii on multiplicity and kT largely factorize. At the same multiplicity, the radii are relatively independent of the colliding system and center-of-mass energy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Rv2969c, essential for optimal growth in Mycobacterium tuberculosis, is a DsbA-like enzyme that interacts with VKOR-derived peptides and has atypical features of DsbA-like disulfide oxidases

The gene product of M. tuberculosis Rv2969c is shown to be a disulfide oxidase enzyme that has a canonical DsbA-like fold with novel structural and functional characteristics. The bacterial disulfide machinery is an attractive molecular target for developing new antibacterials because it is required for the production of multiple virulence factors. The archetypal disulfide oxidase proteins in Escherichia coli (Ec) are DsbA and DsbB, which together form a functional unit: DsbA introduces disulfides into folding proteins and DsbB reoxidizes DsbA to maintain it in the active form. In Mycobacterium tuberculosis (Mtb), no DsbB homologue is encoded but a functionally similar but structurally divergent protein, MtbVKOR, has been identified. Here, the Mtb protein Rv2969c is investigated and it is shown that it is the DsbA-like partner protein of MtbVKOR. It is found that it has the characteristic redox features of a DsbA-like protein: a highly acidic catalytic cysteine, a highly oxidizing potential and a destabilizing active-site disulfide bond. Rv2969c also has peptide-oxidizing activity and recognizes peptide segments derived from the periplasmic loops of MtbVKOR. Unlike the archetypal EcDsbA enzyme, Rv2969c has little or no activity in disulfide-reducing and disulfide-isomerase assays. The crystal structure of Rv2969c reveals a canonical DsbA fold comprising a thioredoxin domain with an embedded helical domain. However, Rv2969c diverges considerably from other DsbAs, including having an additional C-terminal helix (H8) that may restrain the mobility of the catalytic helix H1. The enzyme is also characterized by a very shallow hydrophobic binding surface and a negative electrostatic surface potential surrounding the catalytic cysteine. The structure of Rv2969c was also used to model the structure of a paralogous DsbA-like domain of the Ser/Thr protein kinase PknE. Together, these results show that Rv2969c is a DsbA-like protein with unique properties and a limited substrate-binding specificity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cloning, expression, purification, crystallization and preliminary X-ray diffraction analysis of macrophage growth locus A (MglA) protein from Francisella tularensis

Francisella tularensis, a potential bioweapon, causes a rare infectious disease called tularemia in humans and animals. The macrophage growth locus A (MglA) protein from F. tularensis associates with RNA polymerase to positively regulate the expression of multiple virulence factors that are required for its survival and replication within macrophages. The MglA protein was overproduced in Escherichia coli, purified and crystallized. The crystals diffracted to 7.5 {angstrom} resolution at the Advanced Photon Source, Argonne National Laboratory and belonged to the hexagonal space group P6{sub 1} or P6{sub 5}, with unit-cell parameters a = b = 125, c = 54 {angstrom}.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Combined Effects of Electric Vehicle Charging and Rooftop Solar Integration on Voltage Imbalance in Residential Distribution Networks

Residential electric vehicle (EV) chargers, as single phase loads, contribute to unbalanced voltage drops across phases, while rooftop solar systems, as single phase generators, can exacerbate voltage imbalance by causing unbalanced voltage increases. This paper investigates combined effects of residential EV charging and rooftop solar generation on voltage imbalance in residential distribution grids. The study examines these simultaneous impacts using the IEEE 8500-node test system, enhanced with a secondary network to realistically model the EV chargers and rooftop solar integration. To account for the variability and uncertainty in the EV charging loads and solar generation, a Monte Carlo approach is employed to capture and quantify the simultaneous impact of the EV charging and rooftop solar integration. In this approach, multiple influencing factors are considered, including state-of-charge (SOC), maximum charging power levels, and geographic distribution of chargers. The results provide practical insights for utilities and stakeholders, offering expectations for planning and operating strategies that effectively manage the increasing adoption of EVs and solar power while maintaining grid reliability.

Choi, Jongchan [ORNL] (ORCID:000000025952455X)↗

Historical Power Outages of the United States and the Social Vulnerability Index

Several works have been documented in the literature to study the societal effect of power outages and to analyze their correlation with the Social Vulnerability Index (SVI). Because the SVI is calculated based on the summed rank of multiple vulnerability factors for environmental hazards, it can include factors irrelevant to power outages caused by extreme events. This work performs a detailed correlation analysis for social vulnerability and power outages by considering different SVI themes (e.g., socioeconomic status, household composition, racial and ethnic minority status, and housing and transportation) and power outages with and without a threshold for extreme weather events. Although there is some relation between specific themes and aspects of power outages and the SVI in the results, there is no strong distinction between power outage durations and low vs. high SVI values. These results point to the need for further research that grounds the specific factors and methods used to develop SVI and related indices to energy services and power systems disruptions.

Bhusal, Narayan↗

Root responses to elevated CO 2 , warming and irrigation in a semi-arid grassland: Integrating biomass, length and life span in a 5-year field experiment

Plant roots mediate the impacts of environmental change on ecosystems, yet knowledge of root responses to environmental change is limited because few experiments evaluate multiple environmental factors and their interactions. Inferences about root functions are also limited because root length dynamics are rarely measured. Using a 5-year experiment in a mixed-grass prairie, we report the responses of root biomass, length and life span to elevated carbon dioxide (CO 2 ), warming, elevated CO 2 and warming combined, and irrigation. Root biomass was quantified using soil cores and root length dynamics were assessed using minirhizotrons. By comparing root dynamics with published results for soil resources and above-ground productivity, we provide mechanistic insights into how climate change might impact grassland ecosystems. In the upper soil layer, 0–15 cm depth, both irrigation and elevated CO 2 alone increased total root length by twofold, but irrigation decreased root biomass and elevated CO 2 had only small positive effects on root biomass. The large positive effects of irrigation and elevated CO 2 alone on total root length were due to increases in both root length production and root life span. The increased total root length and life span under irrigation and elevated CO 2 coincided with apparent shifts from water limitation of plant growth to nitrogen limitation. Warming alone had minimal effects on root biomass, length and life span in this shallow soil layer. Warming and elevated CO 2 combined increased root biomass and total root length by c. 25%, but total root length in this treatment was lower than expected if the effects of CO 2 and warming alone were additive. Treatment effects on total root length and root life span varied with soil depth and root diameter. Synthesis. Sub-additive effects of CO 2 and warming suggest studies of elevated CO 2 alone might overestimate the future capacity of grassland root systems to acquire resources. In this mixed-grass prairie, elevated CO 2 with warming stimulated total root length and root life span in deeper soils, likely enhancing plant access to more stable pools of growth-limiting resources, including water and phosphorus. Therefore, these root responses help explain previous observations of higher, and more stable, above-ground productivity in these projected climate conditions.

59 BASIC BIOLOGICAL SCIENCES↗

Parametric Modeling and Economic Analysis of a 2MW th 3-Stream sCO 2 Heat Exchanger

Here, this paper presents the design and cost optimization of a novel 2MW th 3-stream sCO2 plate-fin heat exchanger. This heat exchanger design is unique in that it uses reduced metal oxide particle-to-sCO2 heat exchanger for cost-effective energy storage applications. The design uses low velocity, laminar air as the re-oxidizing reactant to transfer the heat of the re-oxidizing reaction to a sCO2 power loop. The design of the heat exchanger is based on a 2-D, 3-fluid plate/fin heat transfer model. The model parameterizes the size, shape, and number of passages of the heat exchanger to calculate the temperature profile, pressure drop, and fluid velocities of all three fluids. Global heat exchanger parameters such as the effectiveness and total heat transferred to the sCO2 are then calculated for overall performance. Due to the value and increased use of sCO2 heat exchangers in power cycles, a cost model of the system based on the unique high temperature/high pressure operating conditions was created using quotes from reference projects and market analysis. These quoted air-to-sCO2 heat exchangers are then processed using multiple weighting factors pertinent to heat exchanger design, including heat exchanger type, maximum temperature, differential pressures, fluids, duty, and more. These factors are then used in an exponential function in order to generate a parameterized cost curve. The design and cost of the heat exchanger are then optimized using the SMPSO genetic algorithm in Python. The optimization objectives for the system are to maximize the overall system effectiveness, including an air recuperator for preheating, and to minimize unit costs. Additional constraints are added to the system for the sCO2 and air pressure drops, air velocity to reduce particle entrainment, and the length and volume of the heat exchanger.

Cost Model↗

Fundamental Behavior of ENSO Phase Locking

El Niño–Southern Oscillation (ENSO) events tend to peak at the end of the calendar year, a phenomenon called ENSO phase locking. This phase locking is a fundamental ENSO property that is determined by its basic dynamics. The conceptual ENSO recharge oscillator (RO) model is adopted to examine the ENSO phase-locking behavior in terms of its peak time, strength of phase locking, and asymmetry between El Niño and La Niña events. The RO model reproduces the main phase-locking characteristics found in observations, and the results show that the phase locking of ENSO is mainly dominated by the seasonal modulation of ENSO growth/decay rate. In addition, the linear/nonlinear mechanism of ENSO phase preference/phase locking is investigated using RO model. The difference between the nonlinear phase-locking mechanism and linear phase-preference mechanism is largely smoothed out in the presence of noise forcing. Further, the impact on ENSO phase locking from annual cycle modulation of the growth/decay rate, stochastic forcing, nonlinearity, and linear frequency are examined in the RO model. The preferred month of ENSO peak time depends critically on the phase and strength of the seasonal modulation of the ENSO growth/decay rate. Furthermore, the strength of phase locking is mainly controlled by the linear growth/decay rate, the amplitude of seasonal modulation of growth/decay rate, the amplitude of noise, the SST-dependent factor of multiplicative noise, and the linear frequency. The asymmetry of the sharpness of ENSO phase locking is induced by the asymmetric effect of state-dependent noise forcing in El Niño and La Niña events.

54 ENVIRONMENTAL SCIENCES↗

Taguchi Design of Experiment Enabling the Reduction of Spikes on the Sides of Patterned Thin Films for Tunnel Junction Fabrication

Photolithographically patterned thin films often possess unwanted spikes along the side edges. These spikes are a significant issue for the development of spinvalve memory, tunnel junction based molecular devices, and micro-electromechanical systems. Here, we report a very simple, economical, and fast way of creating an optimum photoresist profile for the production of spike-free patterned films. This approach is based on performing a soaking step in the positive-photoresist’s developer solution before the UV exposure. However, the success of this method depends on multiple photolithography factors: photoresist thickness (governed by spin speed), soft baking temperature, soaking time in developer, and exposure time. In this paper, we report our systematic experiments to study the effect of these factors by following the L9 experimental scheme of the Taguchi Design of experiment (TDOE) approach. The L9 experiment scheme effectively accommodated the study of four photolithography factors, each with three levels. After performing photolithography as per L9 TDOE scheme, we sputter deposited 20 nm Tantalum to check the side edge profile of the patterned film by atomic force microscope (AFM). We measured the heights of the spikes along the thin film edges. We utilized spike height as the desired property and chose “smaller the better” criteria for the TDOE analysis. TDOE enabled us to understand the relative importance of the parameters, relationship among the parameters, and impact of the various levels of the parameters on the thin film edge profile. TDOE analysis yielded an optimum combination of levels for the four photolithography factors. The optimum combination of photolithography factors included spin speed 4000 rpm, 100 °C soft baking temperature, 60 sec pre-soaking in the developer solution, and 15 sec UV exposure. We validated the TDOE by AFM and observed spike free patterned films. Here, we also made complete tunnel junction devices by utilizing the optimized photolithography factors for the bottom electrode and obtained excellent tunneling behavior. In summary, this study provides a very simple, economical, and fast photolithography approach for creating optimum photoresist profile for the micro-nano scale devices and electromechanical structures.

36 MATERIALS SCIENCE↗

Recipes for a Successful Exit for Clean- and Hard-tech Startups

This study demonstrates the combinations of multiple causal factors that formulate a startup’s strategy to successfully “exit”, namely “recipes for a successful exit,” in the clean- and hard-tech sector. We identify seven key causal factors (i.e., causal conditions) that impact startup success, including commercial readiness, investor interactions, favorable industry, non-financial support, straightforward development path, experienced team, and visibility to investors. We also investigate the combinations of selective causal conditions that can provide further synergetic impact. We conduct the fuzzy-set qualitative comparative analysis (fsQCA) on seven US clean and hard-tech startups that exited between 2005 and 2016. The successful companies all demonstrate distinctive characteristics based on three general categories (1) robust ecosystem; (2) heavy-lifting team; or (3) external opportunity. Across these three categories, commercial readiness and strong investor interactions are necessary conditions for all exit cases. But there are important differences that drive success in each category, such as the interaction with non-financial support (in the robust ecosystem case), experienced team (in the heavy-lifting team case), and favorable industry (in the external opportunity case). Furthermore, our findings are meant to support entrepreneurs in reaching an exit by optimizing the given internal and external circumstances, and policymakers to build a robust ecosystem that can increase the success rate of the clean- and hardtech development.

99 GENERAL AND MISCELLANEOUS↗

FY2012 summary of tasks completed on PROTEUS-thermal work

PROTEUS is a suite of the neutronics codes, both old and new, that can be used within the SHARP codes being developed under the NEAMS program. Discussion here is focused on updates and verification and validation activities of the SHARP neutronics code, DeCART, for application to thermal reactor analysis. As part of the development of SHARP tools, the different versions of the DeCART code created for PWR, BWR, and VHTR analysis were integrated. Verification and validation tests for the integrated version were started, and the generation of cross section libraries based on the subgroup method was revisited for the targeted reactor types.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Characterization of the NPOD3 Detectors in MCNP5 and MCNP6

Researchers performed a series of measurements in May 2012 to characterize the NPOD3 detector systems. The detectors were placed in varying states of disassembly to determine the effect of individual components on detection efficiency. A 4.5 kg α-phase Pu sphere known as the Los Alamos BeRP Ball was used as the SNM source in both a bare configuration and reflected by varying thicknesses of polyethylene. A set of simulations matching the experimental setups were run and the data were compared to the measured data. The total and leakage multiplication and the inferred k values were determined for both the simulations and the measurements. Table 3 shows a comparison of the results from MCNP6 and MCNP5 with the list-mode patch to the measured results. The count rates for the calculated results were obtained by dividing the total line count in the list-mode file (equivalent to the total number of absorptions in the NPOD detectors) by the total run time. The count rates are identical for both codes, and they both produce the same multiplicity and inferred k values regardless of measurement time as expected.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Critical and Subcritical 0-Power Experiment at Rensselaer (CaSPER)

This report discusses the 0-power experiment at Rensselaer Polytechnic Institute (CaSPER). K eff simulation results, list-mode multiplication results, and related work are included. The aim of the work is subcritical measurements for code and nuclear data validation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Signatures of Extended Storage of Used Nuclear Fuel in Casks

As the amount of used nuclear fuel continues to grow, more and more used nuclear fuel will be transferred to storage casks. A consolidated storage facility is currently in the planning stages for storing these casks, where at least 10,000 MTHM of fuel will be stored. This site will have potentially thousands of casks once it is operational. A facility this large presents new safeguards and nuclear material accounting concerns. A new signature based on the distribution of neutron sources and multiplication within casks was part of the Department of Energy Office of Nuclear Energy’s Material Protection, Account and Control Technologies (MPACT) campaign. Under this project we looked at fingerprinting each cask's neutron signature. Each cask has a unique set of fuel, with a unique spread of initial enrichment, burnup, cooling time, and power history. The unique set of fuel creates a unique signature of neutron intensity based on the arrangement of the assemblies. The unique arrangement of neutron sources and multiplication produces a reliable and unique identification of the cask that has been shown to be relatively constant over long time periods. The work presented here could be used to restore from a loss of continuity of knowledge at the storage site. This presentation will show the steps used to simulate and form this signature from the start of the effort through its conclusion in September 2016.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗