Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “METHANATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Methane Hydrate Formation from Enhanced Organic Carbon Burial During Glacial Lowstands: Examples from the Gulf of Mexico

Methane hydrates in fine-grained marine sediments are often found within veins and fractures occupying discrete depth intervals that are surrounded by hydrate-free sediments. As they are not connected with gas sources beneath the base of the methane hydrate stability zone (MHSZ), these isolated hydrate-bearing intervals have been interpreted as formed by in situ microbial methane. We investigate here the hypothesis that these hydrate deposits form in sediments that were deposited during glacial lowstands and contain higher amounts of labile particulate organic carbon (POC), leading to enhanced microbial methanogenesis. During Pleistocene lowstands, river loads are deposited near the steep top of the continental slope and turbidity currents transport organic-rich, fine-grained sediments to deep waters. Faster sedimentation rates during glacial periods result in better preservation of POC because of decreased exposure times to oxic conditions. The net result is that more labile POC enters the methanogenic zone and more methane is generated in these sediments. To test this hypothesis, we apply an advection-diffusion-reaction model with a time-dependent deposition of labile POC at the seafloor controlled by glacioeustatic sea level variations in the last 250 kyr. The model is run for parameters estimated at three sites drilled by the 2009 Gulf of Mexico Joint Industry Project: Walker Ridge in the Terrebonne Basin (WR313-G and WR313-H) and Green Canyon near the canyon embayment into the Sigsbee Escarpment (GC955-H). In the model, gas hydrate forms in sediments with higher labile POC content deposited during the glacial cycle between 230 and 130 kyr (marine isotope stages 6 and 7). The corresponding depth intervals in the three sites contain hydrates, as shown by high bulk electrical resistivities and resistive subvertical fracture fills. This match supports the hypothesis that enhanced POC burial during glacial lowstands can result in hydrate formation from in situ microbial methanogenesis. Our results have implications for carbon cycling during glacial/interglacial cycles and for hydrate accumulation in the MHSZ. In particular, once hydrate-bearing intervals formed during glacial periods are buried beneath the MHSZ and dissociate, gas bubbles can rise and recycle microbial methane into the MHSZ.

Malinverno, Alberto↗

Smart Methane Emission Detection System Development (Final Report)

Working with the Department of Energy’s National Energy Technology Laboratory, Southwest Research Institute® (SwRI®) developed a system to identify methane leaks reliably, accurately, and autonomously at critical midstream sections of the natural gas distribution network in real- time for the purpose of mitigating methane emissions using Optical Gas Imaging (OGI) cameras. SwRI’s Smart Leak Detection – Methane (SLED/M) adds a high degree of automation to the process of methane leak detection to minimize sources of human error, minimize response time to a leak event, and maximize midstream visibility. Furthermore, SwRI has been working towards integrating Quantitative OGI (QOGI) capabilities into this existing technology. By leveraging Deep Learning, SwRI now has the capability to estimate fugitive emission leak rates quickly and reliably, which allows operators to detect emissions, quantify leak rate, prioritize repairs, and validate the repairs in a single instrument. The next generation QOGI technology leverages the same cameras used in Leak Detection and Repair (LDAR) programs, with improvements in safety and speed for traditional quantification-based repairs, ultimately leading to less overhead cost for the operators. The goals for this research were to develop two types of models with the following goals: 1. Run in real-time on the edge (≥ 12 Hz) 2. Classification: Achieve less than 5% false positive detection 3. Classification: Achieve ≥ 95% methane plume detection rate 4. Regression: achieve ≤ 10 standard cubic feet per hour (scfh) prediction > 70% of the time In order to achieve these results, multiple infrared (IR) and other sensors were investigated in tandem with the midwave IR (MWIR) OGI to provide additional information to train the underlying models. Information on atmospheric conditions including humidity, temperature, pressure, and solar radiation was provided by a weather station. Several machine learning and deep learning architectures and methods, including looking at quantized classification networks and regressions networks, were explored. As further data was collected, curated, and labeled, it allowed for more refined regressive networks to be adequately trained, leading to better insight into the true flow rates being observed. An important valuable deliverable of this research effort was the development of an advanced network which underwent multiple iterations capable of giving a continuous output. The current network has a predicted mean average percentage error (MAPE) of 12.3% just outside our target goal of 10.00%, but an accuracy of 97.78% at ±50 scfh, well within the overall goal for the Department of Energy (DOE) program. Upon closer inspection, it was observed that more than 10% of datapoints contributing to the MAPE predictions were the result of low flow rate predictions and are beyond the sensitivity of instrument measurement as a result of normal operational variation and noise.

03 NATURAL GAS↗

Impacts of The Wetland Sedge Carex aquatilis on Microbial Community and Methane Metabolisms

Microbial activity in the soil of wetlands is responsible for the emission of more methane to the atmosphere than all other natural sources combined. This microbial activity is heavily impacted by plant roots, which influence the microbial community by exuding organic compounds and by leaking oxygen into an otherwise anoxic environment. This study compared the microbial communities of planted and unplanted wetland soil from an Alaskan bog to elucidate how plant growth influences populations and metabolisms of methanogens and methanotrophs. A common boreal wetland sedge, Carex aquatilis, was grown in the laboratory and DNA samples were sequenced from the rhizosphere, unplanted bulk soil, and a simulated rhizosphere with oxygen input but no organic carbon. The abundance of both methanogens and methanotrophs were positively correlated with methane emissions. Among the methanotrophs, both aerobic and anaerobic methane oxidizing microbes were more common in the rhizosphere of mature plants than in unplanted soil, while facultative methanotrophs capable of utilizing either methane or other molecules became relatively less common. Furthermore, these trends indicate that the roots in this experiment created an environment which favored highly specialized microbial metabolisms over generalist approaches. One aspect of this specialized microbiome is the presence of both aerobic and anaerobic metabolisms, which indicates that oxygen is present but is a limiting resource controlling competition.

54 ENVIRONMENTAL SCIENCES↗

A multiscale packed-bed reactor model for sustainable ethylene production via chemical looping oxidative coupling of methane

The rising global warming concerns and shale gas discovery have prompted research in the direction of greenhouse gas (GHG), such as methane, reduction and conversion. Oxidative coupling of methane (OCM) offers a pathway to low carbon-intense valorization of methane while producing ethylene, a chemical regarded as central to the petrochemical industry. Even after decades of OCM discovery, researchers keep understanding the process and underlying chemical reactions in a pursuit to achieve industrial viability for OCM. Here, in general, OCM suffers from low C 2 selectivity, yield and reactor temperature runaways due to highly exothermic nature of its reactions. Computational Fluid Dynamics (CFD) tools help analyze spatial gradients within the reactor to deeply understand the diffusion of species, mass and heat transfer phenomena. Furthermore, challenges associated with scaling up such as hot spot formation and parametric sensitivity can be addressed without having to expend on costly experiments. The current paper presents a multiscale packed-bed reactor CFD model coupled with a chemical kinetic model for the chemical looping OCM. The CFD model includes two scales i.e., macroscale for catalyst bed and microscale for individual pellets. Moreover, a chemical kinetic model based on 10 gas-phase reactions is integrated with the CFD model. An additional surface reaction for the formation of gas-phase oxygen from catalyst surface is added to account for the absence of feed oxygen. The model is calibrated against experimental results. The calibrated model captures trends in CH 4 conversion, C 2 selectivity and C 2 yield within a ± 4.35 % range across a temperature range of 700-900 °C. Moreover, model fidelity is evaluated by varying key computational parameters such as mesh resolution and time step size. The model is also verified by varying the inlet methane concentration and the gas hourly space velocity (GHSV) and comparing the results with literature. A sensitivity analysis and scale-up of the current model is undergoing.

Chemical looping↗

Revolutionizing Methane Transformation with the Dual Production of Aromatics and Electricity in a Protonic Ceramic Electrocatalytic Membrane Reactor

Reducing the energy and carbon intensity of the conventional chemical processing industry can be achieved by electrochemically transforming natural gases into higher-value chemicals with higher efficiency and near-zero emissions. In this work, the direct conversion of methane to aromatics and electricity has been achieved in a protonic ceramic electrocatalytic membrane reactor through the integration of a proton-conducting membrane assembly and a trimetallic Pt–Cu/Mo/ZSM-5 catalyst for the nonoxidative methane dehydro-aromatization reaction. In this integrated system, a remarkable 15.6% single-pass methane conversion with an 11.4% benzene yield has been demonstrated, while a peak power density of 276 mW cm –2 is obtained at 700 °C. The enhanced 15.7% increase in conversion and 16.0% improvement in the yield are observed when compared with the thermochemical process, which is attributed to the shift of reaction equilibrium by the removal of hydrogen through the protonic membrane. Concurrently, the faster H2 removal at a higher electrical current gave rise to a higher methane conversion and benzene yield. Furthermore, the catalyst can be efficiently regenerated by eliminating carbon deposition. A stable cell potential is maintained for 45 h under a constant current load of 0.13 A cm –2 . Lastly, the dual production of aromatics and electricity in the electrocatalytic membrane reactor has been demonstrated to be an attractive approach for decarbonizing chemical processing.

aromatic compounds↗

Reducing Reaction Temperature, Steam Requirements, and Coke Formation During Methane Steam Reforming Using Electric Fields: A Microkinetic Modeling and Experimental Study

In this study, we approach several common problems with the Ni-catalyzed methane steam reformation reaction (MSR) using a two-pronged approach combining density functional theory (DFT) calculations with experimental work. Specifically, we look at the deactivation of a Ni catalyst due to coke formation, its high operating temperature requirements, and the high steam-to-methane (H 2 O/CH 4 ) ratio needed for proper MSR operation. A DFT-based microkinetic model was developed in the presence and absence of electric fields and the results were compared with experimental results. The microkinetic model shows that under various electric fields, the most favorable MSR mechanism changed slightly. It also shows that the presence of a positive electric field decreases the surface coverage of carbon, increases the water coverage, accelerates the rate-limiting step of the C-H bond cleavage in methane, and increases the desorption rates of the syngas product (CO + H 2 ) during MSR. Consequently, for a given methane conversion, a positive electric field allows for significantly lower H 2 O/CH 4 ratio and operating temperatures as compared to systems without an electric field. These findings correspond well with experimental tests under a variety of operating conditions. In addition, improvement in the catalytic activity due to the presence of a positive electric field remained significant even at industrially relevant applied pressures improving the hydrogen yield greatly. Overall, we find that an applied electric field can play a significant role in improving the catalytic activity of heterogeneous reactions. Here, this information can guide the design of heterogeneous reactions in the presence of an electric field. By utilizing the electric field generated by various renewable energy sources, electric field assisted heterogeneous reactions can open up a paradigm in future energy research.

03 NATURAL GAS↗

Microbially induced precipitation of silica by anaerobic methane-oxidizing consortia and implications for microbial fossil preservation

Authigenic carbonate minerals can preserve biosignatures of microbial anaerobic oxidation of methane (AOM) in the rock record. It is not currently known whether the microorganisms that mediate sulfate-coupled AOM—often occurring as multicelled consortia of anaerobic methanotrophic archaea (ANME) and sulfate-reducing bacteria (SRB)—are preserved as microfossils. Electron microscopy of ANME-SRB consortia in methane seep sediments has shown that these microorganisms can be associated with silicate minerals such as clays [Chen et al., Sci. Rep. 4, 1–9 (2014)], but the biogenicity of these phases, their geochemical composition, and their potential preservation in the rock record is poorly constrained. Long-term laboratory AOM enrichment cultures in sediment-free artificial seawater [Yu et al., Appl. Environ. Microbiol. 88, e02109-21 (2022)] resulted in precipitation of amorphous silicate particles (~200 nm) within clusters of exopolymer-rich AOM consortia from media undersaturated with respect to silica, suggestive of a microbially mediated process. The use of techniques like correlative fluorescence in situ hybridization (FISH), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS), and nanoscale secondary ion mass spectrometry (nanoSIMS) on AOM consortia from methane seep authigenic carbonates and sediments further revealed that they are enveloped in a silica-rich phase similar to the mineral phase on ANME-SRB consortia in enrichment cultures. Like in cyanobacteria [Moore et al., Geology 48, 862–866 (2020)], the Si-rich phases on ANME-SRB consortia identified here may enhance their preservation as microfossils. Finally, the morphology of these silica-rich precipitates, consistent with amorphous-type clay-like spheroids formed within organic assemblages, provides an additional mineralogical signature that may assist in the search for structural remnants of microbial consortia in rocks which formed in methane-rich environments from Earth and other planetary bodies.

54 ENVIRONMENTAL SCIENCES↗

Modeling of Pressurized Electrochemistry and Steam-Methane Reforming in Solid Oxide Fuel Cells and the Effects on Thermal and Electrical Stack Performance

Summarizes work done to extend the electrochemical performance and methane reforming submodels to include the effects of pressurization and to demonstrate this new modeling capability by simulating large stacks operating on methane-rich fuel under pressurized and non-pressurized conditions. Pressurized operation boosts electrochemical performance, alters the kinetics of methane reforming, and effects the equilibrium composition of methane fuels. This work developed constitutive submodels that couple the electrochemistry, reforming, and pressurization to yield an increased capability of the modeling tool for prediction of SOFC stack performance.

03 NATURAL GAS↗

Enhanced Coal Bed Methane Recovery and CO2 Sequestration in the Powder River Basin

Unminable coal beds are potentially large storage reservoirs for the sequestration of anthropogenic CO2 and offer the benefit of enhanced methane production, which can offset some of the costs associated with CO2 sequestration. The objective of this report is to provide a final topical report on enhanced coal bed methane recovery and CO2 sequestration to the U.S. Department of Energy in fulfillment of a Big Sky Carbon Sequestration Partnership milestone. This report summarizes work done at Idaho National Laboratory in support of Phase II of the Big Sky Carbon Sequestration Partnership. Research that elucidates the interaction of CO2 and coal is discussed with work centering on the Powder River Basin of Wyoming and Montana. Sorption-induced strain, also referred to as coal swelling/shrinkage, was investigated. A new method of obtaining sorption-induced strain was developed that greatly decreases the time necessary for data collection and increases the reliability of the strain data. As coal permeability is a strong function of sorption-induced strain, common permeability models were used to fit measured permeability data, but were found inadequate. A new permeability model was developed that can be directly applied to coal permeability data obtained under laboratory stress conditions, which are different than field stress conditions. The coal permeability model can be used to obtain critical coal parameters that can be applied in field models. An economic feasibility study of CO2 sequestration in unminable coal seams in the Powder River Basin of Wyoming was done. Economic analyses of CO2 injection options are compared. Results show that injecting flue gas to recover methane from CBM fields is marginally economical; however, this method will not significantly contribute to the need to sequester large quantities of CO2. Separating CO2 from flue gas and injecting it into the unminable coal zones of the Powder River Basin seam is currently uneconomical, but can effectively sequester over 86,000 tons (78,200 Mg) of CO2 per acre while recovering methane to offset costs. The cost to separate CO2 from flue gas was identified as the major cost driver associated with CO2 sequestration in unminable coal seams. Improvements in separations technology alone are unlikely to drive costs low enough for CO2 sequestration in unminable coal seams in the Powder River Basin to become economically viable. Breakthroughs in separations technology could aid the economics, but in the Powder River Basin, they cannot achieve the necessary cost reductions for breakeven economics without incentives.

01 COAL, LIGNITE, AND PEAT↗

Hydrothermal but Not Mechanical Pretreatment of Wastewater Algae Enhanced Anaerobic Digestion Energy Balance due to Improved Biomass Disintegration and Methane Production Kinetics

This study used pilot-scale high-rate algae ponds to assess algal–bacteria biomass productivity and wastewater nutrient removal as well as the impact of mechanical and hydrothermal pretreatments on biomass disintegration, methane production kinetics, and anaerobic digestion (AD) energy balance. Mechanical pretreatment had a minor effect on biomass disintegration and methane production. By contrast, hydrothermal pretreatment significantly reduced particle size and increased the solubilized organic matter content by 3.5 times. The methane yield and production rate increased by 20–55% and 20–85%, respectively, with the highest values achieved after pretreatment at 121 °C for 60 min. While the 1st-order and pseudo-1st-order reaction equation models fitted methane production from untreated biomass best (R2 > 0.993), the modified Gompertz sigmoidal-type model provided a superior fit for hydrothermally pretreated algae (R2 ≥ 0.99). The AD energy balance revealed that hydrothermal pretreatment improved the total energy output by 25–40%, with the highest values for volume-specific and mass-specific total energy outputs reaching 0.23 kW per digester m3 and 2.3 MW per ton of biomass volatile solids. Additionally, net energy recovery (energy output per biomass HHV) increased from 20% for untreated algae to 32–34% for hydrothermally pretreated algae, resulting in net energy ratio and net energy efficiency of 2.14 and 68%, respectively.

09 BIOMASS FUELS↗

Utilizing Earth Observations of Soil Freeze/Thaw Data and Atmospheric Concentrations to Estimate Cold Season Methane Emissions in the Northern High Latitudes

The northern wetland methane emission estimates have large uncertainties. Inversion models are a qualified method to estimate the methane fluxes and emissions in northern latitudes but when atmospheric observations are sparse, the models are only as good as their a priori estimates. Thus, improving a priori estimates is a competent way to reduce uncertainties and enhance emission estimates in the sparsely sampled regions. Here, we use a novel way to integrate remote sensing soil freeze/thaw (F/T) status from SMOS satellite to better capture the seasonality of methane emissions in the northern high latitude. The SMOS F/T data provide daily information of soil freezing state in the northern latitudes, and in this study, the data is used to define the cold season in the high latitudes and, thus, improve our knowledge of the seasonal cycle of biospheric methane fluxes. The SMOS F/T data is implemented to LPX-Bern DYPTOP model estimates and the modified fluxes are used as a biospheric a priori in the inversion model CarbonTracker Europe-CH 4 . The implementation of the SMOS F/T soil state is shown to be beneficial in improving the inversion model’s cold season biospheric flux estimates. Our results show that cold season biospheric CH4 emissions in northern high latitudes are approximately 0.60 Tg lower than previously estimated, which corresponds to 17% reduction in the cold season biospheric emissions. This reduction is partly compensated by increased anthropogenic emissions in the same area (0.23 Tg), and the results also indicates that the anthropogenic emissions could have even larger contribution in cold season than estimated here.

54 ENVIRONMENTAL SCIENCES↗

Influence of Reduction Pretreatment and Methane Reforming on Nickel Solubility in YSZ Grains and Nickel Sintering within Ni-YSZ SOFC Anode Materials

Internal reforming of hydrocarbon fuels (e.g. methane or natural gas) can improve the thermal efficiency of solid oxide fuel cells (SOFC) by balancing exothermic electrochemical oxidation of H2 and CO at the anode/cathode interface with endothermic steam reforming reactions on the anode1. Generally the rate of reforming is much greater than the rate of H2 and CO oxidation leading to extensive thermal gradients across the cell that can compromise the physical integrity of the cell. Therefore, methods to control reformation activity and predict thermal gradients are needed. Computational modeling is used to predict thermal gradients and fuel conversion profiles across the cell, thus accurate and predictable methane reforming kinetics are required. Significant discrepancies in activation energy, rate expressions, and rate constants for methane reforming over nickel-yttria stabilized zirconia (Ni-YSZ) are reported in the open literature1-4. The objective of this work is to provide clarity on factors leading to discrepancies in kinetic information reported in the literature and identify potential methods to control reforming rates over NiYSZ anodes. Effects of pretreatment and reforming on Ni microstructure and activity of NiYSZ anodes for methane reforming were examined under open-circuit conditions.

03 NATURAL GAS↗

In situ Investigation of Methane Dry Reforming on M-CeO 2 (111) {M= Co, Ni, Cu} Surfaces: Metal-Support Interactions and the activation of C-H bonds at Low Temperature

Studies with a series of M-CeO 2 (111) {M= Co, Ni, Cu} surfaces indicate that metal-oxide interactions can play a very important role for the activation of methane and its reforming with CO 2 at relatively low temperatures (600-700 K). Among the systems examined, Co-CeO 2 (111) exhibits the best performance and Cu-CeO 2 (111) has negligible activity. Experiments using ambient pressure XPS indicate that methane dissociates on Co-CeO2(111), at temperatures as low as 300 K, generating CH x and CO x species on the catalyst surface. The results of density-functional calculations show a reduction in the methane activation barrier from 1.07 eV on Co(0001) to 0.87 eV on Co 2+ /CeO 2 (111), and to only 0.05 eV on Co 0 /CeO 2-x (111). At 700 K, under methane dry reforming conditions, CO 2 dissociates on the oxide surface and a catalytic cycle is established without coke deposition. In conclusion, a significant part of the CH x formed on the Co 0 /CeO 2-x (111) catalyst recombines to yield ethane or ethylene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Partial Oxidation of Methane to Synthesis Gas Using Supported Ga-Containing Bimetallic Catalysts and a Ti-Promoter

A series of bimetallic Ga-containing materials using TiO 2 and TiO 2 -promoted SiO 2 supports have been prepared. Rhodium, palladium, and platinum have been used as additional metals in this system. The materials are characterized and used as catalysts for the partial oxidation of methane into synthesis gas (H 2 and CO). The presence of a low quantity of titanium in the form of anatase TiO 2 was shown to improve the overall activity of catalytic methane oxidation and to strongly increase the selectivity of partial oxidation products over the total oxidation of methane to carbon dioxide and water. Here, particular attention is paid to the formation of gallium-metal alloys on the surface of the catalyst supports. Rh-Ga-Ti-SiO 2 was found to be the most active and selective catalyst, giving 89 % conversion of methane and 99 % selectivity to synthesis gas at 750 °C, as well as exhibiting catalytic activity and preferential conversion to partial oxidation products at temperatures as low as 350 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bioconversion of Methane for Value-Added Products

This chapter will briefly summarize the background of methane production from natural gas and biogas together with an introduction to the biomolecular basis of methanotrophy and the actual and potential commercial applications. This chapter also discusses the safety considerations for using methane in laboratory and safe development of methane-based bioprocesses. In the end, this chapter will focus on the process development for biological conversion of methane into desired products with attention to the enhancement of mass transfer efficiency and the development of bioreactor designs.

09 BIOMASS FUELS↗

A Microbial Link between Elevated CO 2 and Methane Emissions that is Plant Species-Specific

Rising atmospheric CO 2 levels alter the physiology of many plant species, but little is known of changes to root dynamics that may impact soil microbial mediation of greenhouse gas emissions from wetlands. We grew co-occurring wetland plant species that included an invasive reed canary grass (Phalaris arundinacea L.) and a native woolgrass (Scirpus cyperinus L.) in a controlled greenhouse facility under ambient (380 ppm) and elevated atmospheric CO 2 (700 ppm). We hypothesized that elevated atmospheric CO 2 would increase the abundance of both archaeal methanogen and bacterial methanotroph populations through stimulation of plant root and shoot biomass. We found that methane levels emitted from S. cyperinus shoots increased 1.5-fold under elevated CO 2 , while no changes in methane levels were detected from P. arundincea. The increase in methane emissions was not explained by enhanced root or shoot growth of S. cyperinus. Principal components analysis of the total phospholipid fatty acid (PLFA) recovered from microbial cell membranes revealed that elevated CO 2 levels shifted the composition of the microbial community under S. cyperinus, while no changes were detected under P. arundinacea. More detailed analysis of microbial abundance showed no impact of elevated CO 2 on a fatty acid indicative of methanotrophic bacteria (18:2ω6c), and no changes were detected in the terminal restriction fragment length polymorphism (T-RFLP) relative abundance profiles of acetate-utilizing archaeal methanogens. Plant carbon depleted in 13C was traced into the PLFAs of soil microorganisms as a measure of the plant contribution to microbial PLFA. The relative contribution of plant-derived carbon to PLFA carbon was larger in S. cyperinus compared with P. arundinacea in four PLFAs (i14:0, i15:0, a15:0, and 18:1ω9t). The δ13C isotopic values indicate that the contribution of plant-derived carbon to microbial lipids could differ in rhizospheres of CO 2 -responsive plant species, such as S. cyperinusin this study. The results from this study show that the CO 2 –methane link found in S. cyperinus can occur without a corresponding change in methanogen and methanotroph relative abundances, but PLFA analysis indicated shifts in the community profile of bacteria and fungi that were unique to rhizospheres under elevated CO 2 .

59 BASIC BIOLOGICAL SCIENCES↗

Impact of methane and black carbon mitigation on forcing and temperature: a multi-model scenario analysis

The relatively short atmospheric lifetimes of methane (CH 4 ) and black carbon (BC) have focused attention on the potential for reducing anthropogenic climate change by reducing Short-Lived Climate Forcer (SLCF) emissions. This paper examines radiative forcing and global mean temperature results from the Energy Modeling Forum (EMF)-30 multi-model suite of scenarios addressing CH 4 and BC mitigation, the two major short-lived climate forcers. Central estimates of temperature reductions in 2040 from an idealized scenario focused on reductions in methane and black carbon emissions ranged from 0.18–0.26 °C across the nine participating models. Reductions in methane emissions drive 60% or more of these temperature reductions by 2040, although the methane impact also depends on auxiliary reductions that depend on the economic structure of the model. Climate model parameter uncertainty has a large impact on results, with SLCF reductions resulting in as much as 0.3–0.7 °C by 2040. We find that the substantial overlap between a SLCF-focused policy and a stringent and comprehensive climate policy that reduces greenhouse gas emissions means that additional SLCF emission reductions result in, at most, a small additional benefit of ~ 0.1 °C in the 2030–2040 time frame.

54 ENVIRONMENTAL SCIENCES↗

A single external cavity laser-based sensor for simultaneous detection and quantification of atmospheric methane and water vapor

A single external cavity diode laser (ECDL)-based sensor system was developed for simultaneous measurements of methane and water vapor in the atmospheric air. A home-made continuous wave (CW) ECDL with a wavelength of ∼ 1325 nm was employed to cover two absorption lines for different gas species. A high-finesse optical cavity composed of two high-reflectivity mirrors (R=0.99927) was used to enhance the gas absorption in a space of 0.5 l. An isolated methane absorption line at 7552.74 cm{sup −1} and a common (non-isolated) absorption line of water vapor and methane 7552.81cm{sup −1} were utilized for simultaneous detection. A method was developed to calculate the water vapor concentration from these lines. To our knowledge, the method and the absorption lines used in the present paper were used for the first time for simultaneous measurement of the concentrations of atmospheric methane and water vapor.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗