Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAXED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Inferring fusion nuclear burnwidths with low gain photomultiplier impulse response functions

When an inertial confinement fusion implosion is compressed, it maintains thermonuclear density and temperatures for a very short time scale, about 100 ps. The Gamma Reaction History diagnostic measures the time evolution of the fusion burn, but its temporal resolution is limited by the use of a photomultiplier tube (PMT) to amplify the photon signal. Multichannel plate-based PMTs have a fast (~120 ps) full-width at half-max impulse response function (IRF), but the time scale is similar to the incoming physics signal. An analysis routine is used to remove the effect of the PMT IRF and infer the incident fusion burnwidth. With the National Ignition Facility achieving ignition and creating much brighter signals, the PMTs are run at gains three orders of magnitude lower than nominal operation. Calibration at these settings shows the PMT IRFs get ~15% wider. Taking the gain-dependent IRF can affect the inferred nuclear burnwidths by up to ~15%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Ferroelectric epitaxial Al(Sc/B)N/Mo/SiC heterostructures for high operating temperature devices

Advances in wurtzite nitride ferroelectrics of Al 1-x M x N (⁠ M = Sc or B) have led to novel capabilities, which must be integrated into existing fabrication processes. In the case of electronics operating > 200°C, a movement toward SiC-based platforms enables better performance over conventional Si, primarily due to the higher bandgap and lower intrinsic carrier concentration of SiC. Hence, the challenge is to develop a deposition process to integrate Al 1-x M x M x N ferroelectrics with elevated temperature-compatible materials for high temperature electronics such as the non-volatile memory component. We demonstrate epitaxial Al M N/Mo/SiC heterostructures, which provides both the crystalline and surface features that promote high-quality ferroelectric nitride film growth. Omega scans of the Mo (110) reflection exhibit a full width at half max of < 0.02° (40 arc sec) and the (0002) peak of the subsequently grown nitride film had a value of 1.1° for 160 nm thick Al 0.7 Sc 0.3 N and 1.3° for 400 nm thick Al 0.94 B 0.06 N. The crystallographic relationships found between the Al M N, Mo, and SiC layers indicate an advancement in sputter deposition of epitaxial films. Ferroelectric switching is also shown at 400 °C in both samples via polarization-electric field hysteresis and pulsed measurements, which exhibited P r values >100 μC cm -2 and E c between 3 and 4 M V cm -1 ⁠, despite a large presence of oxygen in both Al M N films ranging between 4 and 5 at.%, revealed by compositional analysis. This study demonstrates the process for synthesizing high-crystal quality ferroelectric nitride films, which can be used in extremely high temperature applications.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Planar shock-induced bubble collapse and jetting in water captured via X-ray phase contrast imaging

Shock wave–bubble interactions in water manifest rich dynamics driven by a combination of strong pressure and density mismatches. They have a wide variety of applications, including the injection of pharmaceuticals, and through scaling, enable the exploration of various aspects of high-energy-density systems such as inertial confinement fusion. In this work, the interaction between a micrometric nitrogen bubble and a planar shock wave, characterized by a Mach number of M = 1.24 and a peak pressure of p max = 0.57 , is experimentally recorded using ultra-high-speed x-ray phase contrast imaging. Highly resolved radiographs provide access to all phase discontinuities along the beam path, offering quantities such as the time-varying bubble size, the speed of a jet produced during the bubble collapse, and the time evolution of the shock wave front, which are critical benchmark data for numerical scheme validation. This study addresses the lack of well-characterized, repeatable, and high spatiotemporal resolution experiments at negative Atwood numbers by providing shock–bubble visualization and corresponding numerical simulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Laser wavelength dependence of particle acceleration mechanisms in high intensity laser–solid density plasma interactions

We investigate the generation of relativistic electrons and the subsequent ion acceleration due to target-normal sheath acceleration when ultra-intense (⁠ I > 10 18 W/cm 2 ⁠) short pulse (⁠ τ L < 10ps⁠) lasers are incident onto solid density targets as laser wavelength is varied. Scaling laws for the hot electron temperature, T hot ⁠, and the maximum ion energy, E max ⁠, are recast as a function of laser wavelength. These predictions are compared to results from particle-in-cell computer simulations in a variety of geometries, including cases where realistic plasma density profiles as determined by a radiation hydrodynamics code are used. It is found that the wavelength dependence observed in simulation is less pronounced than what is predicted from the well-established scaling laws. An assessment of how switching to longer laser wavelengths, specifically 2 μm Tm:YLF technology, would impact current high energy density science applications and diagnostics is made.

Electromagnetism↗
DOE OSTI2024

Bi-modal particle size distribution for high energy product hybrid Nd–Fe–B—Sm–Fe–N bonded magnets

In this work, we have demonstrated high energy product bonded magnet by leveraging the variation in sizes between Nd-Fe-B and Sm-Fe-N, as well as their hard magnetic properties. The hybrid anisotropic bonded magnets contain 70 vol% of magnet powder (Dy-free Nd-Fe-B and Sm-Fe-N) and 30 vol% of nylon. The objective of the work was to create bi-modal and bi-compositional bonded magnets in which the fine (3μm) particles of Sm-Fe-N would be used to fill the voids between the bigger Nd-Fe-B (105μm) particles, thus improve packing density. The magnetic hysteresis loop did not show significant signs of decoupled interactions between the magnetic phases. It was also found that the performance of the bonded magnet was most enhanced at 1:4 ratio of Nd-Fe-B and Sm-Fe-N. At that ratio, maximum density of 5 g/cm 3 and the highest (BH) max value of 18.5 MGOe were obtained, although the intrinsic coercivity decreased, relative to the trend seen for other ratios. This work advances the opportunity to expand the use of Sm-Fe-N in bonded magnet applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Carbonate-hosted microbial communities are prolific and pervasive methane oxidizers at geologically diverse marine methane seep sites

At marine methane seeps, vast quantities of methane move through the shallow subseafloor, where it is largely consumed by microbial communities. This process plays an important role in global methane dynamics, but we have yet to identify all of the methane sinks in the deep sea. Here, we conducted a continental-scale survey of seven geologically diverse seafloor seeps and found that carbonate rocks from all sites host methane-oxidizing microbial communities with substantial methanotrophic potential. In laboratory-based mesocosm incubations, chimney-like carbonates from the newly described Point Dume seep off the coast of Southern California exhibited the highest rates of anaerobic methane oxidation measured to date. After a thorough analysis of physicochemical, electrical, and biological factors, we attribute this substantial metabolic activity largely to higher cell density, mineral composition, kinetic parameters including an elevated V max , and the presence of specific microbial lineages. Our data also suggest that other features, such as electrical conductance, rock particle size, and microbial community alpha diversity, may influence a sample’s methanotrophic potential, but these factors did not demonstrate clear patterns with respect to methane oxidation rates. Based on the apparent pervasiveness within seep carbonates of microbial communities capable of performing anaerobic oxidation of methane, as well as the frequent occurrence of carbonates at seeps, we suggest that rock-hosted methanotrophy may be an important contributor to marine methane consumption.

58 GEOSCIENCES↗
DOE OSTI2023

A forward modeling approach to analyzing galaxy clustering with S IM BIG

We present cosmological constraints from a simulation-based inference (SBI) analysis of galaxy clustering from the SimBIG forward modeling framework. SimBIG leverages the predictive power of high-fidelity simulations and provides an inference framework that can extract cosmological information on small nonlinear scales. In this work, we apply SimBIG to the Baryon Oscillation Spectroscopic Survey (BOSS) CMASS galaxy sample and analyze the power spectrum, P ℓ (k), to k max = 0.5 h/Mpc. We construct 20,000 simulated galaxy samples using our forward model, which is based on 2,000 high-resolution Quijote N -body simulations and includes detailed survey realism for a more complete treatment of observational systematics. We then conduct SBI by training normalizing flows using the simulated samples and infer the posterior distribution of ΛCDM cosmological parameters: Ω m , Ω b , h, n s , σ 8 . We derive significant constraints on Ω m and σ 8 , which are consistent with previous works. Our constraint on σ 8 is 27% more precise than standard P ℓ analyses because we exploit additional cosmological information on nonlinear scales beyond the limit of current analytic models, k > 0.25 h/Mpc. This improvement is equivalent to the statistical gain expected from a standard P ℓ analysis of galaxy sample ~ 60% larger than CMASS. While we focus on P ℓ in this work for validation and comparison to the literature, SimBIG provides a framework for analyzing galaxy clustering using any summary statistic. We expect further improvements on cosmological constraints from subsequent SimBIG analyses of summary statistics beyond P ℓ .

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Myosin in autoinhibited off state(s), stabilized by mavacamten, can be recruited in response to inotropic interventions

Mavacamten is a FDA-approved small-molecule therapeutic designed to regulate cardiac function at the sarcomere level by selectively but reversibly inhibiting the enzymatic activity of myosin. It shifts myosin toward ordered off states close to the thick filament backbone. It remains elusive whether these myosin heads in the off state(s) can be recruited in response to physiological stimuli when required to boost cardiac output. We show that cardiac myosins stabilized in these off state(s) by mavacamten are recruitable by 1) Ca 2+ , 2) increased chronotropy [heart rate (HR)], 3) stretch, and 4) β-adrenergic (β-AR) stimulation, all known physiological inotropic interventions. At the molecular level, we show that Ca 2+ increases myosin ATPase activity by shifting mavacamten-stabilized myosin heads from the inactive super-relaxed state to the active disordered relaxed state. At the myofilament level, both Ca 2+ and passive lengthening can shift mavacamten-ordered off myosin heads from positions close to the thick filament backbone to disordered on states closer to the thin filaments. In isolated rat cardiomyocytes, increased stimulation rates enhanced shortening fraction in mavacamten-treated cells. This observation was confirmed in vivo in telemetered rats, where left-ventricular dP/dt max , an index of inotropy, increased with HR in mavacamten-treated animals. Finally, we show that β-AR stimulation in vivo increases left-ventricular function and stroke volume in the setting of mavacamten. Our data demonstrate that the mavacamten-promoted off states of myosin in the thick filament are at least partially activable, thus preserving cardiac reserve mechanisms.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Wave function analysis with a maximum flow algorithm

An efficient algorithm for computing the maximum-flow path in a network is applied to the identification of the dominant configuration state functions (CSFs) in a graphically contracted function (GCF), configuration interaction, wave function. The flow network is a space of spin-adapted CSFs represented by a Shavitt graph, wherein the nodes correspond to orbital occupations and spin quantum numbers. The graph nodes are connected by arcs, and an arc density is defined as sums of the associated squared CSF coefficients. A max-min approach determines an upper bound to the maximum possible incoming flow for each graph node. A backtracking step generates a candidate walk and is followed by a limited search of alternative branching paths for the dominant CSF. The arc density contributions are removed from the graph, and the algorithm is reapplied to the updated graph. This list of generated walks can be partitioned in order to guarantee that the dominant CSFs have been identified. All of the steps in this algorithm are computationally efficient and do not depend on the potentially large dimension of the underlying linear CSF expansion space. An analysis of low-lying valence states of C-2 illustrates the method.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Sheath constraints on turbulent magnetised plasmas

Abstract A solid target in contact with a plasma charges (negatively) to reflect the more mobile species (electrons) and thus keep the bulk plasma quasineutral. To shield the bulk plasma from the charged target, there is an oppositely (positively) charged sheath with a sharp electrostatic potential variation on the Debye length scale λ D . In magnetised plasmas where the magnetic field is inclined at an oblique angle α with the target, some of the sheath potential variation occurs also on the ion sound gyroradius length scale ρ S cos ⁡ α , caused by finite ion gyro-orbit distortion and losses. We consider a collisionless and steady-state magnetised plasma sheath whose thickness l ms ∼ max ( λ D , ρ S cos ⁡ α ) is smaller than the characteristic length scale L of spatial fluctuations in the bulk plasma, such that the limit l ms / L → 0 is appropriate. Spatial structures are assumed to be magnetic field-aligned. In the case of small magnetic field angle α ∼ δ ≡ ρ S / L ≪ 1 , electric fields tangential to the target transport ions towards the target via E × B drifts at a rate comparable to the one from parallel streaming. A generalised form of the kinetic Bohm–Chodura criterion at the sheath entrance is derived by requiring that the sheath electric field have a monotonic spatial decay far from the target. The criterion depends on tangential gradients of potential and ion distribution function, with additional nontrivial conditions.

kinetic Bohm–Chodura condition↗
DOE OSTI2023

Variation of effective filament diameter, irreversibility field, anisotropy, and pinning efficiency in Bi-2212 round wires

Abstract In recent years Bi 2 Sr 2 CaCu 2 O x (Bi-2212) received increasing attention due to its round wire multifilamentary architecture, a unique feature in high- T c superconductor. In fact, round wires are preferable for magnet designs, including solenoids for nuclear magnetic resonance (NMR) or research purpose and accelerator magnets. However, due to the narrow over-pressure heat treatment conditions necessary to obtain high J c and to the peculiar microstructure of Bi-2212 wires, a full understanding of the correlations between the different properties has not yet been developed. In this paper we investigate the effect of a vital part of Bi-2212 optimization, the maximum heat-treatment temperature T max in the range of 885 °C–896 °C, on the variations of J c , effective filament diameter d eff , anisotropy γ , INTER- and intra-grain irreversibility fields and pinning energies U 0 , all critical parameters in unravelling the complex mix of vortex pinning and connectivity that ultimately determines the critical current density. We found that d eff of the higher J c wires heat-treated at lower temperature is much smaller than for the lower J c wires. Moreover, a systematic increase of the irreversibility field and a decrease of the intrinsic Bi-2212 anisotropy underpins the higher J c . The analysis of the pinning energies reveals that there is little sample-to-sample variation in the INTER-grain pinning, whereas in all samples the intra-grain pinning has an enhancement below ∼40–45 K becoming more and more evident with increasing J c . These results suggest that the overall J c performance are not only related to the wire microstructure and connectivity, which obviously affect the INTER-grain properties, but they are also intimately related to the intrinsic and intra-grain properties such as γ and U 0 .

Physics↗
DOE OSTI2023

Evidence for current suppression in superconductor–superconductor bilayers

Superconducting radio frequency (SRF) cavities, which are critical components in many particle accelerators, need to be operated in the Meissner state to avoid strong dissipation from magnetic vortices. For a defect-free superconductor, the maximum attainable magnetic field for operation is set by the superheating field, B sh , which directly depends on the surface current. In heterostructures composed of different superconductors, the current in each layer depends not only on the properties of the individual material, but also on the electromagnetic response of the adjacent layers through boundary conditions at the interfaces. Three prototypical bilayers [Nb 1–x Ti x N (50 nm)/Nb, Nb 1–x Ti x N (80 nm)/Nb, and, Nb 1–x Ti x N (160 nm)/Nb] are investigated here by depth-resolved measurements of their Meissner screening profiles using low energy muon spin rotation (LE-µSR). From fits to a model based on London theory (with appropriate boundary and continuity conditions), a magnetic penetration depth for the thin Nb 1–x Ti x N layers of λ Nb 1–x Ti x N = 182.5(31) nm is found, in good agreement with literature values for the bulk alloy. Using the measured λ Nb 1–x Ti x N , the maximum vortex-free field, B max , of the superconductor-superconductor (SS) bilayer structure was estimated to be 610(40) mT. The strong suppression of the surface current in the Nb 1–x Ti x N layer suggests an optimal thickness of ~ 1.4λ Nb 1–x Ti x N = 261(14) nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Tomographic galaxy clustering with the Subaru Hyper Suprime-Cam first year public data release

We analyze the clustering of galaxies in the first public data release of the HSC Subaru Strategic Program. Despite the relatively small footprints of the observed fields, the data are an excellent proxy for the deep photometric datasets that will be acquired by LSST, and are therefore an ideal test bed for the analysis methods being implemented by the LSST DESC. We select a magnitude limited sample with i<24.5 and analyze it in four redshift bins covering 0.15≲z≲1.5. We carry out a Fourier-space analysis of the two-point clustering of this sample, including all auto- and cross-correlations. We demonstrate the use of map-level deprojection methods to account for fluctuations in the galaxy number density caused by observational systematics. Through an HOD analysis, we place constraints on the characteristic halo masses of this sample, finding a good fit up to scales k max = 1Mpc –1 , including both auto- and cross-correlations. Our results show monotonically decreasing average halo masses, which can be interpreted in terms of the drop-out of red galaxies at high redshifts for a flux-limited sample. In terms of photometric redshift systematics, we show that additional care is needed in order to marginalize over uncertainties in the redshift distribution in galaxy clustering, and that these uncertainties can be constrained by including cross-correlations. We are able to make a ~3σ detection of lensing magnification in the HSC data. Our results are stable to variations in σ 8 and Ω c and we find constraints that agree well with measurements from Planck and low-redshift probes. Lastly, we use our pipeline to study the clustering of galaxies as a function of limiting flux, and provide a simple fitting function for the linear galaxy bias for magnitude limited samples as a function of limiting magnitude and redshift.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

The neutrino gravitational memory from a core collapse supernova: phenomenology and physics potential

General Relativity predicts that the passage of matter or radiation from an asymmetrically-emitting source should cause a permanent change in the local space-time metric. This phenomenon, called the gravitational memory effect, has never been observed, however supernova neutrinos have long been considered a promising avenue for its detection in the future. With the advent of deci-Hertz gravitational wave interferometers, observing the supernova neutrino memory will be possible, with important implications for multimessenger astronomy and for tests of gravity. In this work, we develop a phenomenological (analytical) toy model for the supernova neutrino memory effect, which is overall consistent with the results of numerical simulations. This description is then generalized to several case studies of interest. We find that, for a galactic supernova, the dimensionless strain, h(t), is of order ~ 10 -22 - 10 -21 , and develops over a typical time scale that varies between ~ 0.1 - 10 s, depending on the time-evolution of the anisotropy of the neutrino emission. The characteristic strain, h c (f), has a maximum at a frequency f max ~ Script $\mathcal{O}$(10 -1 ) - Script $\mathcal{O}$(1) Hz. The detailed features of the time- and frequency-structure of the memory strain will inform us of the matter dynamics near the collapsed core, and allow to distinguish between different stellar collapse scenarios. Next generation gravitational wave detectors like DECIGO and BBO will be sensitive to the neutrino memory effect for supernovae at typical galactic distances and beyond; with Ultimate DECIGO exceeding a detectability distance of 10 Mpc

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Hi-COLA: fast, approximate simulations of structure formation in Horndeski gravity

We introduce Hi-COLA, a code designed to run fast, approximate N-body simulations of non-linear structure formation in reduced Horndeski gravity. Given an input Lagrangian, Hi-COLA dynamically constructs the appropriate field equations and consistently solves for the cosmological background, linear growth, and screened fifth force of that theory. Hence Hi-COLA is a general, adaptable, and useful tool that allows the mildly non-linear regime of many Horndeski theories to be investigated for the first time, at low computational cost. In this work, we first describe the screening approximations and simulation setup of Hi-COLA for theories with Vainshtein screening. We validate the code against traditional N-body simulations for cubic Galileon gravity, finding 2.5% agreement up to k max = 1.2 h/Mpc. To demonstrate the flexibility of Hi-COLA, we additionally run the first simulations of an extended shift-symmetric gravity theory. We use the consistency and modularity of Hi-COLA to dissect how the modified background, linear growth, and screened fifth force all contribute to departures from ΛCDM in the non-linear matter power spectrum. Hi-COLA can be found at https://github.com/Hi-COLACode/Hi-COLA.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Galaxy bias in the era of LSST: perturbative bias expansions

Upcoming imaging surveys will allow for high signal-to-noise measurements of galaxy clustering at small scales. In this work, we present the results of the Rubin Observatory Legacy Survey of Space and Time (LSST) bias challenge, the goal of which is to compare the performance of different nonlinear galaxy bias models in the context of LSST Year 10 (Y10) data. Specifically, we compare two perturbative approaches, Lagrangian perturbation theory (LPT) and Eulerian perturbation theory (EPT) to two variants of Hybrid Effective Field Theory (HEFT), with our fiducial implementation of these models including terms up to second order in the bias expansion as well as nonlocal bias and deviations from Poissonian stochasticity. Here, we consider a variety of different simulated galaxy samples and test the performance of the bias models in a tomographic joint analysis of LSST-Y10-like galaxy clustering, galaxy-galaxy-lensing and cosmic shear. We find both HEFT methods as well as LPT and EPT combined with non-perturbative predictions for the matter power spectrum to yield unbiased constraints on cosmological parameters up to at least a maximal scale of k max = 0.4 Mpc -1 for all samples considered, even in the presence of assembly bias. While we find that we can reduce the complexity of the bias model for HEFT without compromising fit accuracy, this is not generally the case for the perturbative models. We find significant detections of non-Poissonian stochasticity in all cases considered, and our analysis shows evidence that small-scale galaxy clustering predominantly improves constraints on galaxy bias rather than cosmological parameters. These results therefore suggest that the systematic uncertainties associated with current nonlinear bias models are likely to be subdominant compared to other sources of error for tomographic analyses of upcoming photometric surveys, which bodes well for future galaxy clustering analyses using these high signal-to-noise data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

The anomaly of the CMB power with the latest Planck data

Abstract The lack of power anomaly is an unexpected feature observed at large angular scales in the maps of Cosmic Microwave Background (CMB) produced by the COBE, WMAP andPlancksatellites. This signature, which consists in a missing of power with respect to that predicted by the ΛCDM model, might hint at a new cosmological phase before the standard inflationary era.The main point of this paper is taking into account the latestPlanckpolarisation data to investigate how the CMB polarisation improves the understanding of this feature. With this aim, we apply to the latestPlanckdata, both PR3 (2018) and PR4 (2020) releases, a new class of estimators capable of evaluating this anomaly by considering temperature and polarisation data both separately and in a jointly way. This is the first time that the PR4 dataset has been used to study this anomaly. To critically evaluate this feature, taking into account the residuals of known systematic effects present in thePlanckdatasets, we analyse the cleaned CMB maps using different combinations of sky masks, harmonic range and binning on the CMB multipoles.Our analysis shows that the estimator based only on temperature data confirms the presence of a lack of power with a lower-tail-probability (LTP), depending on the component separation method, ≤ 0.33% and ≤ 1.76% for PR3 and PR4, respectively. To our knowledge, the LTP≤ 0.33% for the PR3 dataset is the lowest one present in the literature obtained fromPlanck2018 data, considering thePlanckconfidence mask. We find significant differences between these two datasets when polarisation is taken into account most likely due to a different level of systematics. Especially, the analysis with PR3 data, unlike that with PR4, seems to point towards a lack of power at large scales also for polarisation.Moreover, we also show that for the PR3 dataset the inclusion of the subdominant polarisation information provides estimates that are less likely accepted in a ΛCDM cosmological model than the only-temperature analysis over the entire harmonic-range considered. In particular, at ℓ max = 26, we found that no simulation has a value as low as the data for all the pipelines.

Astronomy & Astrophysics↗
DOE OSTI2024

The Atacama Cosmology Telescope DR6 and DESI: structure formation over cosmic time with a measurement of the cross-correlation of CMB lensing and luminous red galaxies

We present a high-significance cross-correlation of CMB lensing maps from the Atacama Cosmology Telescope (ACT) Data Release 6 (DR6) with luminous red galaxies (LRGs) from the Dark Energy Spectroscopic Instrument (DESI) Legacy Survey spectroscopically calibrated by DESI. We detect this cross-correlation at a significance of 38σ; combining our measurement with the Planck Public Release 4 (PR4) lensing map, we detect the cross-correlation at 50σ. Fitting this jointly with the galaxy auto-correlation power spectrum to break the galaxy bias degeneracy with σ 8 , we perform a tomographic analysis in four LRG redshift bins spanning 0.4 ≤ z ≤ 1.0 to constrain the amplitude of matter density fluctuations through the parameter combination S 8 × = σ 8 (Ω m / 0.3) 0.4 . Prior to unblinding, we confirm with extragalactic simulations that foreground biases are negligible and carry out a comprehensive suite of null and consistency tests. Using a hybrid effective field theory (HEFT) model that allows scales as small as k max = 0.6 h/ Mpc, we obtain a 3.3% constraint on S 8 × = σ 8 (Ω m / 0.3) 0.4 = 0.792 +0.024 -0.028 from ACT data, as well as constraints on S 8 × (z) that probe structure formation over cosmic time. Our result is consistent with the early-universe extrapolation from primary CMB anisotropies measured by Planck PR4 within 1.2σ. Jointly fitting ACT and Planck lensing cross-correlations we obtain a 2.7% constraint of S 8 × = 0.776 +0.019 -0.021 , which is consistent with the Planck early-universe extrapolation within 2.1σ, with the lowest redshift bin showing the largest difference in mean. The latter may motivate further CMB lensing tomography analyses at z < 0.6 to assess the impact of potential systematics or the consistency of the ΛCDM model over cosmic time.

79 ASTRONOMY AND ASTROPHYSICS↗