Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Optical phonon lifetimes in sputtered AlN thin films

We study the vibrational properties of AlN thin films deposited on silicon (100) substrates by the reactive DC-pulsed magnetron sputtering. The frequencies and lifetimes of the E{sub 1}(TO) and A{sub 1}(LO) optical phonons are calculated from Fourier transform infrared spectra using the factorized model of a damped oscillator. We analyze the structural properties by the x-ray diffraction technique to correlate the elongation of phonon lifetimes with increasing film thickness. The lifetimes of the phonon modes in AlN thin films are compared to the values in a single crystal.

36 MATERIALS SCIENCE↗

Resputtering of zinc oxide films prepared by radical assisted sputtering

Sputtering losses of zinc oxide films prepared by radical assisted sputtering were studied. It was found that the sputtering loss can be very severe in oxygenous sputtering processes of zinc oxide films. In general, resputtering caused by negative oxygen ions dominates the sputtering loss, while diffuse deposition plays a minor role. Resputtering is strongly correlated with the sputtering threshold energy of the deposited films and the concentration of O{sup -} in the sputtering zone. The balance between the oxygen concentration in the sputtering zone and the oxidation degree of the growing films depends on the sputtering rate. Our research suggests that a lower oxygen concentration in the sputtering zone and a higher oxidation degree of the growing films are favorable for reducing the resputtering losses. The sputtering loss mechanisms discussed in this work are also helpful for understanding the deposition processes of other magnetron sputtering systems.

36 MATERIALS SCIENCE↗

Synthesis of c-axis oriented AlN thin films on different substrates: A review

Highly c-axis oriented AlN thin films have been deposited by reactive sputtering on different substrates. The crystallographic properties of layered film structures consisting of a piezoelectric layer, aluminum nitride (AlN), synthesized on a variety of substrates, have been examined. Aluminum nitride thin films have been deposited by reactive pulsed-DC magnetron sputtering using an aluminum target in an Ar/N{sub 2} gas mixture. The influence of the most critical deposition parameters on the AlN thin film crystallography has been investigated by means of X-ray diffraction (XRD) analysis of the rocking curve Full-Width at Half Maximum (FWHM) of the AlN-(0 0 0 2) peak. The relationship between the substrate, the synthesis parameters and the crystallographic orientation of the AlN thin films is discussed. A guide is provided showing how to optimize these conditions to obtain highly c-axis oriented AlN thin films on substrates of different nature.

36 MATERIALS SCIENCE↗

Structure and Optical properties of RF-Sputtered Mn-ZnO Nanocrystalline Thin Films

Zn{sub 0.95}Mn{sub 0.05}O thin films were deposited on quartz substrates by radio-frequency magnetron sputtering using ceramic target in pure oxygen gas environment.. The X-ray diffraction and atomic force microscopy (AFM) studies reveal the nanocrysttalline nature of the films. The average grain size of the film is found to increase with increase in process gas pressure. The optical transmission spectra show the films to be highly transparent (80-95%).The direct energy band gap of film decreases from 3.04-2.92 eV with the increase in working gas pressure.

36 MATERIALS SCIENCE↗

Structure and mechanical properties of 3dTM ion doped RF sputtered ZnO thin films on Si (100)

Mn, Fe and Mn-Fe doped ZnO thin films were deposited on Si (100) substrates by rf- magnetron sputtering using ceramic target in pure oxygen gas environment. The X-ray diffraction shows the polycrystalline wurtzite structure films. The average grain size varies from 32-50 nm, with lower grain size for Fe doped ZnO films. The room temperature loading and unloading curve are continuous without any pop-in. The Young's modulus and hardness are in the range 156-178 GPa and 14-15.5 GPa respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation and thermal desorption properties of dc sputtered zirconium-hydrogen-helium thin films

We developed a new approach for preparing hydrogen and helium co-containing zirconium films (Zr-H-He) to simulate aging metal tritides. We also studied the effect of hydrogen on helium behavior, in which we applied direct current magnetron sputtering in a mixture of working gases (helium, argon, and hydrogen). The amount and depth profile of helium and hydrogen trapped in the films were determined using the elastic recoil detection analysis. The microstructure and surface morphology of the Zr-H-He films were studied by x-ray diffraction, transmission electron microscopy, and atomic force microscopy. To investigate the effect of hydrogen on the thermal release behavior of helium in the Zr film, thermal desorption spectrometry (TDS) was used, which revealed a similar desorption behavior to aged tritides. TDS experiments showed that the spectra were constituted by low-temperature peaks around 300 deg. C and high temperature peaks above 750 deg. C. Furthermore, the solid-phase {alpha} to {delta} transformation changed the shapes of the high-temperature peaks related to microstates of helium bubbles and caused the peak with a massive helium release shift toward lower temperature obviously.

36 MATERIALS SCIENCE↗

Electrical properties of epitaxial SrTiO{sub 3} tunnel barriers on (001) Pt/SrTiO{sub 3} substrates

Coherent, epitaxial Pt films with root-mean-square surface roughness values of less than one unit cell were grown on (001) SrTiO{sub 3} substrates by dc sputtering. These Pt films served as bottom electrodes for epitaxial SrTiO{sub 3} tunnel barriers grown by rf magnetron sputtering. The SrTiO{sub 3} barriers were free of pinholes and showed mean surface roughness values of less than one unit cell. Barriers with a thickness of 4.5 nm showed excellent insulating properties and nonlinear current-voltage characteristics. At high bias fields, a reproducible hysteresis and deviation from the ideal tunneling behavior were observed.

36 MATERIALS SCIENCE↗

Growth, microstructure and electrical properties of sputter-deposited hafnium oxide (HfO2) thin films grown using HfO2 ceramic target

Hafnium oxide (HfO₂) thin films have been made by radio-frequency (rf) magnetron-sputtering onto Si(100) substrates under varying growth temperature (Ts). HfO₂ ceramic target has been employed for sputtering while varying the Ts from room temperature to 500⁰C during deposition. The effect of Ts on the growth and microstructure of deposited HfO₂ films has been studied using grazing incidence x-ray diffraction (GIXRD), X-ray photoelectron spectroscopy (XPS), and high-resolution scanning electron microscopy (HR-SEM) coupled with energy dispersive x-ray spectrometry (EDS). The results indicate that the effect of Ts is significant on the growth, surface and interface structure, morphology and chemical composition of the HfO₂ films. Structural characterization indicates that the HfO₂ films grown at Ts<200 ⁰C are amorphous while films grown at Ts>200 ⁰C are nanocrystalline. An amorphous-to-crystalline transition occurs at Ts=200 ⁰C. Nanocrystalline HfO₂ films crystallized in a monoclinic structure with a (-111) orientation. XPS measurements indicated the high surface-chemical quality and stoichiometric nature of the grown HfO₂ films. An interface layer (IL) formation occurs due to reaction at the HfO₂-Si interface for HfO₂ films deposited at Ts>200 ⁰C. The thickness of IL increases with increasing Ts. XPS and EDS at the HfO₂-Si cross-section indicate the IL is a (Hf, Si)-O compound. The electrical characterization using capacitance-voltage measurements indicate that the dielectric constant decreases from 25 to 16 with increasing Ts.

36 MATERIALS SCIENCE↗

Preparation and characterization of RF sputtered Ce-V mixed oxide thin films

Cerium-Vanadium mixed oxide thin films were deposited at room temperature by varying RF power in RF magnetron sputtering. The morphology and structural features were studied by taking FESEM and XRD and optical properties were analyzed by taking transmittance and absorption spectra. The crystalline film shows orthorhombic CeVO{sub 3} phase and the observed grain size varies from 89.4nm to 208.7nm. The transmission increases and the absorption edge at 330nm is blue shifted with increase in RF power. The optical band gap is found to increase from 1.59 to 1.94eV. The PL spectra shows blue shift in the emission peak centered at a wavelength of 495nm with increase in RF power.

36 MATERIALS SCIENCE↗

New oxygen radical source using selective sputtering of oxygen atoms for high rate deposition of TiO{sub 2} films

We have developed a new oxygen radical source based on the reactive sputtering phenomena of a titanium target for high rate deposition of TiO{sub 2} films. In this oxygen radical source, oxygen radicals are mainly produced by two mechanisms: selective sputter-emission of oxygen atoms from the target surface covered with a titanium oxide layer, and production of high-density oxygen plasma in the space near the magnetron-sputtering cathode. Compared with molecular oxygen ions, the amount of atomic oxygen radicals increased significantly with an increase in discharge current so that atomic oxygen radicals were mainly produced by this radical source. It should be noted that oxygen atoms were selectively sputtered from the target surface, and titanium atoms sputter-emitted from the target cathode were negligibly small. The amount of oxygen radicals supplied from this radical source increased linearly with increasing discharge current, and oxygen radicals of 1 Multiplication-Sign 10{sup 15} atoms/s/cm{sup 2} were supplied to the substrate surface at a discharge current of 1.2 A. We conclude that our newly developed oxygen radical source can be a good tool to achieve high rate deposition and to control the structure of TiO{sub 2} films for many industrial design applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In situ analyses on negative ions in the sputtering process to deposit Al-doped ZnO films

The origin of high energy negative ions during deposition of aluminum doped zinc oxide (AZO) films by dc magnetron sputtering of an AZO (Al{sub 2}O{sub 3}: 2.0 wt %) target was investigated by in situ analyses using the quadrupole mass spectrometer combined with the electrostatic energy analyzer. High energy negative oxygen (O{sup -}) ions which possessed the kinetic energy corresponding to the cathode sheath voltage were detected. The maximum flux of the O{sup -} ions was clearly observed at the location opposite to the erosion track area on the target. The flux of the O{sup -} ions changed hardly with increasing O{sub 2} flow ratio [O{sub 2}/(Ar+O{sub 2})] from 0% to 5%. The kinetic energy of the O{sup -} ions decreased with decreasing cathode sheath voltage from 403 to 337 V due to the enhancement of the vertical maximum magnetic field strength at the cathode surface from 0.025 to 0.100 T. The AZO films deposited with the lower O{sup -} bombardment energy showed the higher crystallinity and improved the electrical conductivity.

36 MATERIALS SCIENCE↗

Effect of Si additions on thermal stability and the phase transition sequence of sputtered amorphous alumina thin films

Si-alloyed amorphous alumina coatings having a silicon concentration of 0 to 2.7 at. % were deposited by combinatorial reactive pulsed DC magnetron sputtering of Al and Al-Si (90-10 at. %) split segments in Ar/O{sub 2} atmosphere. The effect of Si alloying on thermal stability of the as-deposited amorphous alumina thin films and the phase formation sequence was evaluated by using differential scanning calorimetry and X-ray diffraction. The thermal stability window of the amorphous phase containing 2.7 at. % of Si was increased by more than 100 °C compared to that of the unalloyed phase. A similar retarding effect of Si alloying was also observed for the α-Al{sub 2}O{sub 3} formation temperature, which increased by more than 120 °C. While for the latter retardation, the evidence for the presence of SiO{sub 2} at the grain boundaries was presented previously, this obviously cannot explain the stability enhancement reported here for the amorphous phase. Based on density functional theory molecular dynamics simulations and synchrotron X-ray diffraction experiments for amorphous Al{sub 2}O{sub 3} with and without Si incorporation, we suggest that the experimentally identified enhanced thermal stability of amorphous alumina with addition of Si is due to the formation of shorter and stronger Si–O bonds as compared to Al–O bonds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multilayer X-ray mirrors for the (4.4-5)-nm carbon-window spectral region

Cr/C-based multilayer X-ray mirrors intended for the reflection of X-ray radiation in the 'carbon-window' spectral region ({lambda} = 4.4-5 nm) are fabricated and studied. The structures are formed by magnetron sputtering at different deposition parameters. Under normal incidence, record reflection coefficients up to 15% are reached. The structural parameters of the mirrors are investigated by reflectometry at wavelengths of 0.154 and 4.47 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of gas ratio on tribological properties of sputter deposited TiN coatings

Titanium nitride (TiN) coatings were deposited on Si, corning glass, pins of mild steel (MS, ϕ3mm), aluminium (Al, ϕ4mm) and brass (ϕ6mm) substratesby DC magnetron sputtering. The argon and nitrogen (Ar:N{sub 2})gas ratio was precisely controlled by Mass Flow Controller (MFC) and was varied systematically at diffract values of 10:10,12:08, 16:04 and 18:02sccm. The structural properties of TiN coatings were characterized by X-ray diffraction (XRD) and its surface topography was studied using field emission scanning electron microscopy (FE-SEM). The tribological properties of TiN coatings were investigated using pin-on-disc tribometer.

36 MATERIALS SCIENCE↗

Nitrogen stabilized reactive sputtering of optimized TiO{sub 2-x} photocatalysts with visible light reactivity

Photoreactive and visible light responsive nonstoichiometric mixed-phase titania was prepared by reactive direct current magnetron sputtering. Trace amounts of nitrogen were added for process stabilization without being incorporated into the films. Based on the CO{sub 2} photoreduction tests and structural and optical characterization, the influence of the trace nitrogen on the sputtered nonstoichiometric TiO{sub 2} was studied and was compared to nitrogen-doped titania.

36 MATERIALS SCIENCE↗

Note: Ion-induced secondary electron emission from oxidized metal surfaces measured in a particle beam reactor

The secondary electron emission of metals induced by slow ions is characterized in a beam chamber by means of two coaxial semi-cylindrical electrodes with different apertures. The voltages of the outer electrode (screening), inner electrode (collector), and sample holder (target) were set independently in order to measure the effective yield of potential and kinetic electron emissions during ion bombardment. Aluminum samples were exposed to quantified beams of argon ions up to 2000 eV and to oxygen atoms and molecules in order to mimic the plasma-surface interactions on metallic targets during reactive sputtering. The variation of electron emission yield was correlated to the ion energy and to the oxidation state of Al surfaces. This system provides reliable measurements of the electron yields in real time and is of great utility to explore the fundamental surface processes during target poisoning occurring in reactive magnetron sputtering applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Mg doping of thermochromic VO{sub 2} films enhances the optical transmittance and decreases the metal-insulator transition temperature

Thermochromic films of Mg{sub x}V{sub 1-x}O{sub 2} were made by reactive dc magnetron sputtering onto heated glass. The metal-insulator transition temperature decreased by {approx}3 K/at. %Mg, while the optical transmittance increased concomitantly. Specifically, the transmittance of visible light and of solar radiation was enhanced by {approx}10% when the Mg content was {approx}7 at. %. Our results point at the usefulness of these films for energy efficient fenestration.

36 MATERIALS SCIENCE↗

Effect of Enhanced Thermal Stability of Alumina Support Layer on Growth of Vertically Aligned Single-Walled Carbon Nanotubes and Their Application in Nanofiltration Membranes

We investigate the thermal stability of alumina supporting layers sputtered at different conditions and its effect on the growth of aligned single-walled carbon nanotube arrays. Radio frequency magnetron sputtering of alumina under oxygen–argon atmosphere produces a Si-rich alumina alloy film on a silicon substrate. Atomic force microscopy on the annealed catalysts reveals that Si-rich alumina films are more stable than alumina layers with low Si content at the elevated temperatures at which the growth of single-walled carbon nanotubes is initiated. The enhanced thermal stability of the Si-rich alumina layer results in a narrower (< 2.2 nm) diameter distribution of the single-walled carbon nanotubes. Thanks to the smaller diameters of their nanotube pores, membranes fabricated with vertically aligned nanotubes grown on the stable layers display improved ion selectivity.

36 MATERIALS SCIENCE↗