Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Low Temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Characterization of Cosmic Grain Analogs Formed at Low Temperature from Small Hydrocarbon Precursors in the NASA Ames COSmIC Facility

Here, we present the results of the first solid-phase ex situ analysis of cosmic grain analogs produced at low temperature (<200 K) in the NASA Ames COsmic SImulation Chamber (COSmIC) from small hydrocarbon precursors, methane (CH4) and acetylene (C2H2), seeded in an argon supersonic jet expansion and submitted to a plasma discharge. The plasma-induced chemical reactions, initiated between the precursor molecules and their atomic and molecular fragments, radicals and ions, produce larger molecules and eventually solid particles that are collected in situ under controlled conditions. Scanning electron microscopy (SEM) imaging was used to provide insight on the morphology and growth structure of the grains produced in COSmIC, and to investigate how the precursors used to produce the grains affect these parameters. This SEM study has shown that under identical experimental conditions with fixed physical and chemical parameters (precursor density, temperature, energy, and reaction time), heavier precursors in the initial mixture produce larger grains and in larger quantity, most likely as a result of a more complex chemistry: most of the grains produced in the Ar/CH4 (95:5) gas mixture ranged from 15 to 385 nm in diameter with an average density of 2.1 grains per sq.μm, while the grains produced in the Ar/C2H2 (95:5) gas mixture ranged from 40 to 650 nm with a density of 3.5 grains per sq.μm. Changes in the morphology were also observed, with grains produced from acetylene (C2H2) precursors tending to be more spherical than grains produced from methane (CH4) precursors. This change in morphology could be associated with different stages of growth formation at low temperature from a more "planar" growth at first, followed by coagulation into more spherical particles. This study demonstrates that the COSmIC experimental setup can be used to investigate carbon grain formation from small gas-phase molecular precursors at low temperature (<200 K), i.e., under a temperature regime that is representative of the dust condensation zone and outer region of circumstellar envelopes.

Ella Sciamma-O'Brien↗

Increasing minority carrier lifetime in as-grown multicrystalline silicon by low temperature internal gettering

We report a systematic study into the effects of long low temperature (≤500 °C) annealing on the lifetime and interstitial iron distributions in as-grown multicrystalline silicon (mc-Si) from different ingot height positions. Samples are characterised in terms of dislocation density, and lifetime and interstitial iron concentration measurements are made at every stage using a temporary room temperature iodine-ethanol surface passivation scheme. Our measurement procedure allows these properties to be monitored during processing in a pseudo in situ way. Sufficient annealing at 300 °C and 400 °C increases lifetime in all cases studied, and annealing at 500 °C was only found to improve relatively poor wafers from the top and bottom of the block. We demonstrate that lifetime in poor as-grown wafers can be improved substantially by a low cost process in the absence of any bulk passivation which might result from a dielectric surface film. Substantial improvements are found in bottom wafers, for which annealing at 400 °C for 35 h increases lifetime from 5.5 μs to 38.7 μs. The lifetime of top wafers is improved from 12.1 μs to 23.8 μs under the same conditions. A correlation between interstitial iron concentration reduction and lifetime improvement is found in these cases. Surprisingly, although the interstitial iron concentration exceeds the expected solubility values, low temperature annealing seems to result in an initial increase in interstitial iron concentration, and any subsequent decay is a complex process driven not only by diffusion of interstitial iron.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Epitaxial low-temperature growth of In{sub 0.5}Ga{sub 0.5}As films on GaAs(100) and GaAs(111)A substrates using a metamorphic buffer

A complex investigation of epitaxial In{sub 0.5}Ga{sub 0.5}As films grown on GaAs substrates with crystallographic orientations of (100) and (111)A in the standard high- and low-temperature modes has been performed. The parameters of the GaAs substrate and In{sub 0.5}Ga{sub 0.5}As film were matched using the technology of step-graded metamorphic buffer. The electrical and structural characteristics of the grown samples have been studied by the van der Pauw method, atomic force microscopy, scanning electron microscopy, and transmission/ scanning electron microscopy. The surface morphology is found to correlate with the sample growth temperature and doping with silicon. It is revealed that doping of low-temperature In{sub 0.5}Ga{sub 0.5}As layers with silicon significantly reduces both the surface roughness and highly improves the structural quality. Pores 50–100 nm in size are found in the low-temperature samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Isolated and H 2 -reduced Anderson clusters catalyse low-temperature hydrogenation of CO 2 to methanol

CO 2 hydrogenation, especially to methanol, is crucial to establishing sustainable closed-loop systems for carbon utilization. However, the difficulties of CO 2 activation at low temperatures and the ambiguity of structure–activity correlations are obstacles to reducing the energy consumption of the hydrogenation process. Here we report that molecularly defined Anderson PtMo 6 O 24 clusters, sited within a robust metal–organic framework, are catalytic for low-temperature CO 2 hydrogenation. The performance of the cluster showed no signs of decay in either its activity or methanol selectivity over 3,600 h at 180 °C. It also achieves a per-pass yield exceeding that of state-of-the-art heterogeneous catalysts under similar conditions. Combined in situ spectroscopy and density functional theory calculations demonstrated that CH 3 OH formation is dominated by the reverse water–gas shift and subsequent CO* hydrogenation pathway, while the HCOO* pathway may serve as a supplementary route. The well-defined cluster structure offers an ideal model for elucidating structure–activity correlations and opens exciting avenues for the rational design of high-activity, low-temperature catalysts for CO 2 hydrogenation.

heterogeneous catalysis↗

Magnetic and Structural Phase Transitions in Thulium under High Pressures and Low Temperatures

The nature of 4f electrons in many rare earth metals and compounds may be broadly characterized as being either "localized" or "itinerant", and is held responsible for a wide range of physical and chemical properties. The pressure variable has a very dramatic effect on the electronic structure of rare earth metals which in turn drives a sequence of structural and magnetic transitions. We have carried out four-probe electrical resistance measurements on rare earth metal Thulium (Tm) under high pressures to 33 GPa and low temperatures to 10 K to monitor the magnetic ordering transition. These studies are complemented by angle dispersive x-ray diffraction studies to monitor crystallographic phase transitions at high pressures and low temperatures. We observe an abrupt increase in magnetic ordering temperature in Tm at a pressure of 17 GPa on phase transition from ambient pressure hcp-phase to α-Sm phase transition. In addition, measured equation of state (EOS) at low temperatures show anomalously low thermal expansion coefficients likely linked to magnetic transitions.

36 MATERIALS SCIENCE↗

Coupling of Adhesion and Anti-Freezing Properties in Hydrogel Electrolytes for Low-Temperature Aqueous-Based Hybrid Capacitors

Solid-state zinc-ion capacitors are emerging as promising candidates for large-scale energy storage owing to improved safety, mechanical and thermal stability and easy-to-direct stacking. Hydrogel electrolytes are appealing solid-state electrolytes because of eco-friendliness, high conductivity and intrinsic flexibility. However, the electrolyte/electrode interfacial contact and anti-freezing properties of current hydrogel electrolytes are still challenging for practical applications of zinc-ion capacitors. Here, we report a class of hydrogel electrolytes that couple high interfacial adhesion and anti-freezing performance. The synergy of tough hydrogel matrix and chemical anchorage enables a well-adhered interface between hydrogel electrolyte and electrode. Meanwhile, the cooperative solvation of ZnCl 2 and LiCl hybrid salts renders the hydrogel electrolyte high ionic conductivity and mechanical elasticity simultaneously at low temperatures. More significantly, the Zn||carbon nanotubes hybrid capacitor based on this hydrogel electrolyte exhibits low-temperature capacitive performance, delivering high-energy density of 39 Wh kg –1 at –60 °C with capacity retention of 98.7% over 10,000 cycles. With the benefits of the well-adhered electrolyte/electrode interface and the anti-freezing hydrogel electrolyte, the Zn/Li hybrid capacitor is able to accommodate dynamic deformations and function well under 1000 tension cycles even at –60 °C. This work provides a powerful strategy for enabling stable operation of low-temperature zinc-ion capacitors.

25 ENERGY STORAGE↗

Rate Controlling in Low-Temperature Standard NH 3 -SCR: Implications from Operando EPR Spectroscopy and Reaction Kinetics

Here, a series of seven Cu/SSZ-13 catalysts with Si/Al = 6.7 are used to elucidate key rate-controlling factors during low-temperature standard ammonia-selective catalytic reduction (NH 3 -SCR), via a combination of SCR kinetics and operando electron paramagnetic resonance (EPR) spectroscopy. Strong Cu-loading-dependent kinetics, with Cu atomic efficiency increasing nearly by an order of magnitude, is found when per chabazite cage occupancy for Cu ion increases from ~0.04 to ~0.3. This is due mainly to the release of intercage Cu transfer constraints that facilitates the redox chemistry, as evidenced from detailed Arrhenius analysis. Operando EPR spectroscopy studies reveal strong connectivity between Cu-ion dynamics and SCR kinetics, based on which it is concluded that under low-temperature steady-state SCR, kinetically most relevant Cu species are those with the highest intercage mobility. Transient binuclear Cu species are mechanistically relevant species, but their splitting and cohabitation are indispensable for low-temperature kinetics.

catalytic reactions↗

Analysis of formability of Ca-added magnesium alloy sheets at low temperatures

The formability of sheets of the Ca-added magnesium alloy AZX311 was analyzed. The parameters affecting the sheet formability, such as the strain-hardening rate and the strain-rate sensitivity, did not seem to be higher in the alloy AZX311 at temperatures of room temperature (RT) and 200 °C. In addition, the critical stress for fracture at RT was lower in AZX311 than in AZ31. However, AZX311 exhibited higher stretchability and formability at low temperatures than AZ31. Electron back-scattered diffraction microscopy revealed that AZX311 had a weaker basal texture as well as broadened basal poles along the transverse direction. Polycrystal plasticity simulations confirmed that this weaker basal texture increases the activity of basal slip over thickness strain, resulting in the higher formability of AZX311. - Highlights: • A weak basal texture with broadening basal poles along the TD in AZX311 • Lower critical stress for fracture at RT in AZX311 than in AZ31 • Lower strain-hardening rates at low temperatures in the AZX311 than in the AZ31 • Higher formability at low temperatures in AZX311 because of the weak basal texture.

36 MATERIALS SCIENCE↗

Advanced Low Temperature Geothermal Power Cycles (The ENTIV Organic Project) Final Report

Feasibility study of advanced low temperature thermal power cycles for the Entiv Organic Project. Study evaluates amonia-water mixed working fluid energy conversion processes developed and licensed under Kalex in comparison with Kalina cycles. Both cycles are developed using low temperature thermal resource from the Lower Klamath Lake Geothermal Area. An economic feasibility evaluation was conducted for a pilot plant which was deemed unfeasible by the Project Sponsor (Entiv).

15 GEOTHERMAL ENERGY↗

A Tunable Optimized Low-Temperature Sensor Based on the Hybrid Photonic Crystals (F{sub 4}/Bg{sub 5}/F{sub 4}) and (Bg{sub 5}/F{sub 4}/Bg{sub 5})

In this paper, we present a novel type of low-temperature sensor based precisely on the symmetrical hybrid photonic crystals. Thanks to the two-fluid model and the transfer matrix method, we study the temperature sensitivity of the hybrid multilayers (F{sub 4}/Bg{sub 5}/F{sub 4}) and (Bg{sub 5}/F{sub 4}/Bg{sub 5}) where F{sub 4} represents the fourth iteration of the quasi-periodic Fibonacci sequence and Bg5 designates the multilayer Bragg mirror (HLS){sub 5}. We assume that the layers H, L, and S indicate precisely the dielectric materials of Bi{sub 4}Ge{sub 3}O{sub 12}, SiO{sub 2}, and YaBO{sub 2}CuO{sub 7} superconductor one. The analysis of the transmittance spectra shows that the hybrid photonic crystal is more sensitive to the temperature than the periodic one. A higher sensibility value is reached due to the possible combination of the periodic and quasi-periodic sequences. Our investigation reveals that the photonic crystal (F{sub 4}/Bg{sub 5}/F{sub 4}) is more sensitive to low temperature compared to (Bg{sub 5}/F{sub 4}/Bg{sub 5}). The sensitivity is significantly affected by the position of quasi-periodic sequences. The sensitivity of such photonic crystals can be adequately controlled by applying a symmetrical chirping. The designed structures pave the way toward the achievement of a potential low-temperature sensor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low temperature circulating fluidized bed gasification and co-gasification of municipal sewage sludge. Part 2: Evaluation of ash materials as phosphorus fertilizer

Highlights: • Thermal gasification and co-gasification of sewage sludge and wheat straw is tested. • Two low-temperature-circulating-fluidized-bed gasifiers (100 kW and 6 MW) are used. • Influence of fuel type on ash P fertilizer quality and heavy metal fate is assessed. • Incubation study and plant pot experiment applied to examine ash fertilizer effect. - Abstract: The study is part 2 of 2 in an investigation of gasification and co-gasification of municipal sewage sludge in low temperature gasifiers. In this work, solid residuals from thermal gasification and co-gasification of municipal sewage sludge were investigated for their potential use as fertilizer. Ashes from five different low temperature circulating fluidized bed (LT-CFB) gasification campaigns including two mono-sludge campaigns, two sludge/straw mixed fuels campaigns and a straw reference campaign were compared. Experiments were conducted on two different LT-CFBs with thermal capacities of 100 kW and 6 MW, respectively. The assessment included: (i) Elemental composition and recovery of key elements and heavy metals; (ii) content of total carbon (C) and total nitrogen (N); (iii) pH; (iv) water extractability of phosphorus after incubation in soil; and (v) plant phosphorus response measured in a pot experiment with the most promising ash material. Co-gasification of straw and sludge in LT-CFB gasifiers produced ashes with a high content of recalcitrant C, phosphorus (P) and potassium (K), a low content of heavy metals (especially cadmium) and an improved plant P availability compared to the mono-sludge ashes, thereby showing the best fertilizer qualities among all assessed materials. It was also found that bottom ashes from the char reactor contained even less heavy metals than cyclone ashes. It is concluded that LT-CFB gasification and co-gasification is a highly effective way to purify and sanitize sewage sludge for subsequent use in agricultural systems.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Diastereomers and Low-Temperature Oxidation

Diastereomers have historically been ignored when building kinetic mechanisms for combustion. Low-temperature oxidation kinetics, which continues to gain interest in both combustion and atmospheric communities, may be affected by the inclusion of diastereomers in radical chain-branching pathways. In this work, key intermediates and transition states lacking stereochemical specification in an existing diethyl ether low-temperature oxidation mechanism were replaced with their diastereomeric counterparts. Rate coefficients for reactions involving diastereomers were computed with ab initio transition state theory master equation calculations. The presence of diastereomers increased rate coefficients by factors of 1.2-1.6 across various temperatures and pressures. Ignition delay simulations incorporating these revised rate coefficients indicate that the diastereomers enhanced the overall reactivity of the mechanism by almost 15% and increased the peak ketohydroperoxide concentration by 30% in the negative temperature coefficient region at combustion-relevant pressures. Furthermore, these results provide an illustrative indication of the important role of stereomeric effects in oxidation kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel Low-Temperature Electrolyte Using Isoxazole as the Main Solvent for Lithium-Ion Batteries

A novel electrolyte system with an excellent low temperature performance for lithium-ion batteries (LIBs) has been developed and studied. It was discovered for the first time, in this work, that when isoxazole (IZ) was used as the main solvent, the ionic conductivity of the electrolyte for LIBs is more than doubled in a temperature range between -20 and 20 °C compared to the baseline electrolyte using ethylene carbonate–ethyl methyl carbonate as solvents. To solve the problem of solvent cointercalation into the graphite anode and/or electrolyte decomposition, the lithium difluoro(oxalato)borate (LiDFOB) salt and fluoroethylene carbonate (FEC) additive were used to form a stable solid electrolyte interphase on the surface of the graphite anode. Benefitting from the high ionic conductivity at low temperature, cells using a new electrolyte with 1 M LiDFOB in FEC/IZ (1:10, vol %) solvents demonstrated a very high reversible capacity of 187.5 mAh g -1 at -20 °C, while the baseline electrolyte only delivered a reversible capacity of 23.1 mAh g -1 .

25 ENERGY STORAGE↗

Data Needs for Modeling Low-Temperature Non-Equilibrium Plasmas: The LXCat Project, History, Perspectives and a Tutorial

Technologies based on non-equilibrium, low-temperature plasmas are ubiquitous in today’s society. Plasma modeling plays an essential role in their understanding, development and optimization. An accurate description of electron and ion collisions with neutrals and their transport is required to correctly describe plasma properties as a function of external parameters. LXCat is an open-access, web-based platform for storing, exchanging and manipulating data needed for modeling the electron and ion components of non-equilibrium, low-temperature plasmas. The data types supported by LXCat are electron- and ion-scattering cross-sections with neutrals (total and differential), interaction potentials, oscillator strengths, and electron- and ion-swarm/transport parameters. Online tools allow users to identify and compare the data through plotting routines, and use the data to generate swarm parameters and reaction rates with the integrated electron Boltzmann solver. In this review, the historical evolution of the project and some perspectives on its future are discussed together with a tutorial review for using data from LXCat.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling of Work Hardening During Hot Rolling of Vanadium and Niobium Microalloyed Steels in the Low Temperature Austenite Region

This work extends the application of the well-established Estrin and Mecking (EM) work-hardening model in unstable low temperature austenite region. The interaction between work hardening, recovery and softening attributed to recrystallization and transformation to ferrite under dynamic conditions is considered. Experimental parameters were varied to study the effects of strain, strain rate and temperature during hot rolling in the low temperature austenite region. Hot compression tests were performed two microalloyed steels—one containing V and the other Nb—at strain rates between 0.1 and 10 s{sup −1} over a temperature range of 750-1000 °C. A model is presented that describes the influence of dynamic recovery on flow behavior in the unstable austenite region. The modified work-hardening model incorporates an additional fitting parameter to the EM model and is dependent on the recovery and softening rates. The new model improved prediction in the unstable austenite region, while the original EM model gave better correlation at relatively higher temperatures when dynamic recrystallization is dominant or at relatively lower temperatures when only dynamic recrystallization to ferrite was the softening mechanism.

36 MATERIALS SCIENCE↗

Low-Temperature Solution-Phase Growth of Silicon and Silicon-Containing Alloy Nanowires

Low-temperature synthesis of crystalline silicon and silicon-containing nanowires remains a challenge in synthetic chemistry due to the lack of sufficiently reactive Si precursors. We report that colloidal Si nanowires can be grown using tris(trimethylsilyl)silane or trisilane as the Si precursor by a Ga-mediated solution-liquid-solid (SLS) approach at temperatures of about 200 °C, which is more than 200 °C lower than that reported in the previous literature. We further demonstrate that the new Si chemistry can be adopted to incorporate Si atoms into III-V semiconductor lattices, which holds promise to produce a new Si-containing alloy semiconductor nanowire. This development represents an important step toward low-temperature fabrication of Si nanowire-based devices for broad applications.

36 MATERIALS SCIENCE↗