SEARCH · Engineering Papers

Results for “Level density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Effects of vibration and shock on the performance of gas-bearing space-power Brayton cycle turbomachinery. 2: Sinusoidal and random vibration

The vibration response of a gas-bearing rotor-support system was analyzed experimentally documented for sinusoidal and random vibration environments. The NASA Brayton Rotating Unit (BRU), 36,000 rpm; 10 KWe turbogenerator; was subjected in the laboratory to sinusoidal and random vibrations to evaluate the capability of the BRU to (1) survive the vibration levels expected to be encountered during periods of nonoperation and (2) operate satisfactorily (that is, without detrimental bearing surface contacts) at the vibration levels expected during normal BRU operation. Response power spectral density was calculated for specified input random excitation, with particular emphasis upon the dynamic motions of the thrust bearing runner and stator. A three-mass model with nonlinear representation of the engine isolator mounts was used to calculate axial rotor-bearing shock response.

Tessarzik, J. M.↗

NASA NTRS1973

Instabilities in fissioning plasmas as applied to the gas-core nuclear rocket-engine

The compressional wave spectrum excited in a fissioning uranium plasma confined in a cavity such as a gas cored nuclear reactor, is studied. Computer results are presented that solve the fluid equations for this problem including the effects of spatial gradients, nonlinearities, and neutron density gradients in the reactor. Typically the asymptotic fluctuation level for the plasma pressure is of order 1 percent.

Source record↗

NASA NTRS1974

On the upper atmosphere of Neptune

We have reanalyzed the Mount Stromlo observations of the occultation of BD 17 4388 by Neptune and find that the upper atmosphere is not isothermal as suggested by Freeman and Lynga. For a pure hydrogen atmosphere, our results give a temperature of 135 K at a number density of 1000 trillion per cu cm. Above this level, the possibility of a small overall positive temperature gradient is suggested by the data. The temperature structure is complicated in detail, with local 5 to 10 K fluctuations some 10 km in extent associated with the numerous spikes in the light curve. Concentrations of helium greater than 50 per cent can probably be ruled out.

Veverka, J.↗

NASA NTRS1977

Ionosphere/microwave beam interaction study

A solar power satellite microwave power density of 20mw sq cm was confirmed as the level where nonlinear interactions may occur in the ionosphere, particularly at 100 km altitude. Radio wave heating at this altitude, produced at the Arecibo Observatory, yielded negative results for radio wave heating of an underdense ionosphere. Overdense heating produced striations in the ionosphere which may cause severe radio frequency interference problems under certain conditions. The effects of thermal self-focusing are shown to be limited severely geographically. The aspect sensitivity of field-aligned striations makes interference-free regions above magnetic latitude about 60 deg. A test program is proposed to simulate the interaction of the SPS beam with the ionosphere, to measure the effects of the interaction on the ionosphere and on communication and navigation systems, and to interpret the results.

Duncan, L. M.↗

NASA NTRS1977

Phobos and Deimos

Ground-based and spacecraft observations of Phobos and Deimos are reviewed and the satellites' origin is discussed. The crater densities of both bodies are close to the saturation level. The largest impact events may have caused extensive fracturing of their surfaces. The surfaces are at least 1.5 billion years old and may date back to the early history of the solar system. The Martian satellites display large deviations from sphericity. As a result of tidal processes, they are in synchronous rotation. Several independent lines of evidence show that they have regoliths. Despite some provocative arguments, their internal strengths and the nature of their interior are poorly known at present. Photometric measurements suggest that they are made of either carbonaceous chondritic material or a basalt. Sinclair (1972), Born and Duxbury (1975) and Shor (1975) apparently have successfully determined Phobos' secular acceleration. Their value of approximately .001 deg/year/year implies that the interior of Mars has a low specific dissipation factor (about 100), may indicate that a portion of the Martian interior is experiencing partial melting. The low inclination of the satellites' orbits indicates that they were formed as part of the same process that resulted in Mars.

Pollack, J. B.↗

NASA NTRS1978

Development and evaluation of die materials for use in the growth of silicon ribbons by the inverted ribbon growth process, task 2. LSSA project

The results of emission spectroscopic analysis indicate that molten silicon can remain in contact with hot-pressed Si3N4 (99.2 percent theoretical density) for prolonged periods without attaining the impurity content level of the nitride. Although MgO was used as binder, Mg was not found present in the silicon sessile drop in quantities much above the level initially present in the silicon source material. Preliminary experiments with EFG-type dies coated with CVD Si3N4 or CVD SiOxNy indicate that capillary rise does not occur readily in these dies. The same was found to be true of hot-pressed and reaction-sintered Si3N4 obtained commercially. However, when dies were formed by depositing CVD layers on shaped silicon slabs, a column of molten silicon was maintained in each CVD die while being heated in contact with a crucible of molten silicon. Preliminary wetting of dies appears necessary for EFG growth. Several ribbon growth experiments were performed from V-shaped dies.

Duffy, M. T.↗

NASA NTRS1982

A determination of the current density in electron beams

Current gathering rotating probe techniques were used to examine the envelope shape and power density profile of electron beams used in electron beam welding devices. The electron power density contours which determine the shape of the weld vapor cavity, penetration, and local heat distribution were considered. A mathematical analysis consistent with a rotating probe technique necessary to determine the current density distribution (assumed symmetrically radial) in a cross-section of the beam is provided. An explanation of the experimental technique for obtaining data, a BASIC language computer program to determine the current density from the data, and a study indicating the level of confidence to be associated with results obtained are also provided. An example of the application of the analysis to some experimental electron beam data is included.

Beil, R. J.↗

NASA NTRS1980

Preliminary results of mapping urban land cover with Seasat SAR imagery

The detectability of urban land cover types is explored using digitally processed Seasat SAR imagery of the Denver, Colorado area. Test sites within the metropolitan area were selected to include a cross section of Anderson, et. al. Level II land cover classes and cover types representative of the urban area growth stages. Using the Image 100 interactive processing system each test site was level sliced in an attempt to define specific reflectance boundaries for each cover type and to determine the spectral and spatial characteristics of homogeneous response regions. The rural-urban fringe boundary was readily definable, but a precise Level I and Level II land cover classification was not possible. High density housing could be separated from low density housing and from parks, but reflectance values were often look angle dependent. Confusion between some water and vegetation responses also posed problems.

Henderson, F. M.↗

NASA NTRS1983

Shock compaction of molybdenum powder

Shock recovery experiments which were carried out in the 9 to 12 GPa range on 1.4 distension Mo and appear adequate to compact to full density ( 45 (SIGMA)m) powders were examined. The stress levels, however, are below those calculated to be from 100 to approx. 22 GPa which a frictional heating model predicts are required to consolidate approx. 10 to 50 (SIGMA)m particles. The model predicts that powders that have a distension of m=1.6 shock pressures of 14 to 72 GPa are required to consolidate Mo powders in the 50 to 10 (SIGMA)m range.

Ahrens, T. J.↗

NASA NTRS1983

Characterization of grain boundaries in silicon

Zero-bias conductance and capacitance measurements at various temperatures were used to study trapped charges and potential barrier height at the boundaries. Deep-level transient spectroscopy (DLTS) was applied to measure the density of states at the boundary. A study of photoconductivity of grain boundaries in p-type silicon demonstrated the applicability of the technique in the measurement of minority carrier recombination velocity at the grain boundary. Enhanced diffusion of phosphorus at grain boundaries in three cast polycrystalline photovoltaic materials was studied. Enhancements for the three were the same, indicating that the properties of boundaries are similar, although grown by different techniques. Grain boundaries capable of enhancing the diffusion were found always to have strong recombination activities; the phenomena could be related to dangling bonds at the boundaries. Evidence that incoherent second-order twins of (111)/(115) type are diffusion-active is presented.

Cheng, L. J.↗

NASA NTRS1984

Transparent arrays: Progress toward higher efficiency

Principles and design considerations of IR transparent solar arrays are discussed. Optimization of performance of flexible solar arrays was studied. Measured solar absorptance as low as alpha s = 0.59 was achieved which leads to a predicted BOL power density of 182.7 = W/square meters. Advanced array concepts, system level cascaded panels, and transparent rigid panels are proposed and expected benefits discussed.

Pack, G. J.↗

NASA NTRS1986

S V line ratios in the sun

In the present prediction of level populations and emission line intensity ratios for electron densities and temperatures appropriate to the sun, on the basis of new atomic data for S V, the electron impact collision rates for spin-forbidden transitions, and the intercombination transition spontaneous radiative rate, are noted to be substantially larger than previously ascertained. The S V intensity ratio is shown to be a useful electron density diagnostic for log N(e) greater than 11.5 ratios deduced from observations obtained with a slit spectrograph aboard Skylab generally agree with the theoretical values presented.

Dufton, P. L.↗

NASA NTRS1985

Mass fluxes and magnetic structures in the chromosphere and the transition region - Canopies

Preliminary results of applying a model of canopy-type magnetic lines to account for observed mass fluxes in the chromosphere and transiton region are presented. A set of center-to-limb data obtained in H-alpha and C IV, and to which the model is applied, is reported. The C IV line is assumed to form everywhere at the same height, and the H-alpha formation height is derived by assuming that the absorption coefficient is proportional to the local density. The density ratio between H-alpha and C IV levels is taken to be 100. From the results, it is concluded that the model accounts for the low ratio of radial velocities C IV/H-alpha at r = 0, the increase of H-alpha velocity near the limb, and the general center-to-limb behavior in both lines.

Mein, P.↗

NASA NTRS1989

Formaldehyde absorption toward W51

Formaldehyde (H2CO) absorption toward the H II region complex W51A (G49.5 - 0.4) in the 6 cm and 2 cm wavelength rotational transitions has been measured with angular resolution of about 0.15 pc. The continuum H II region shows a large, previously undetected shell structure 5.5 pc along the major axis. The absorption, converted to optical depth, shows a higher degree of clumping throughout the map than previous maps at lower resolution; in particular, two narrow regions of enhanced opacity are observed. The absorption in the velocity range 64-67 km/s LSR extends over most of the region, with an observed velocity gradient of 5.2 km/s pc. The opacity structure largely parallels the velocity structure, with a ridge of enhanced opacity to the north of the highest velocity feature. The S/N of the maps allows accurate modeling of the spectral profiles. Nine distinct clumps in the foreground clouds have been identified and parametrized, and column densities for the 1(11) and 2(12) rotational levels of orthoformaldehyde have been derived.

Kogut, A.↗

NASA NTRS1991

Comparison of VLBI radio-core and X-ray flux densities of extragalactic radio sources

The relation between compact radio core and X-ray emission in extragalactic radio sources, suggested by Worral et al. (1987) and Kembhavi et al. (1986), is investigated by comparing the X-ray flux densities observed in 56 extragalactic radio sources with the Einstein Observatory with the compact radio-core flux densities derived from published VLBI maps for these radio sources. It was found that the radio to X-ray spectral index distribution had a small dispersion, whereas the log-log plot of the flux densities showed no correlation. This implies that the basic level of X-ray emission is determined by the radio-core emission, but that the exact value depends on other parameters.

Bloom, Steven D.↗

NASA NTRS1991

Seasonal variations in the subauroral electron temperature enhancement

A statistical study of the seasonal variations of the subauroral electron temperature enhancement was undertaken using data from the Langmuir probe experiment on the DE 2 satellite throughout most of the mission (1981-1982). In the winter hemisphere the nighttime background electron temperature is the highest and the magnitude of the peak Te responds most weakly to the geomagnetic activity. This behavior can be explained by seasonal trends in the nighttime downward heat flux due to conjugate photoelectrons. Moreover, model results indicate that a factor of about three increase in heat inflow during equinox relative to solstice is required to raise the electron temperature to a given level. This is a consequence of the higher electron densities at the Te peak near equinox. The Te peak occurs on field lines which thread the outer plasmasphere in the vicinity if the plasmapause and thus can be used as a tracer of the plasmapause position.

Fok, M.-C.↗

NASA NTRS1991

Evolution of optical coatings in earth orbit

High-resolution medium-energy backscattering analyses have been performed on SiO and SiO2 optical coatings that were exposed to the space environment aboard the NASA long-duration experiment module flight. The data show an increase in areal density of 1 percent (resolved at the 10 sigma level) in the SiO film as a result of this exposure. It appears that this effect has been produced by the incorporation of atomic oxygen from the ambient environment. Data on the SiO2 film are less compelling but are consistent with some loss of material from the surface. These analyses set a new standard for profiling film thicknesses by ion backscattering.

Mendelhall, Marcus H.↗

NASA NTRS1992

Molybdenum In Cathodes Of Sodium/Metal Chloride Cells

Cyclic voltammetric curves of molybdenum wire in NaAlCl4 melt indicate molybdenum chloride useful as cathode material in rechargeable sodium/metal chloride electrochemical cells. Batteries used in electric vehicles, for electric-power load leveling, and other applications involving high energy and power densities.

Bugga, Ratnakumar V.↗