Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Enhanced peak growth of global vegetation and its key mechanisms

The annual peak growth of vegetation is critical in characterizing the capacity of terrestrial ecosystem productivity and shaping the seasonality of atmospheric CO 2 concentrations. The recent greening of global lands suggests an increasing trend of terrestrial vegetation growth, but whether or not the peak growth has been globally enhanced still remains unclear. Here, we use two global datasets of gross primary productivity (GPP) and a satellite-derived Normalized Difference Vegetation Index (NDVI) to characterize recent changes in annual peak vegetation growth (that is, GPP max and NDVI max ). We demonstrate that the peak in the growth of global vegetation has been linearly increasing during the past three decades. About 65% of the NDVI max variation is evenly explained by expanding croplands (21%), rising CO 2 (22%) and intensifying nitrogen deposition (22%). The contribution of expanding croplands to the peak growth trend is substantiated by measurements from eddy-flux towers, sun-induced chlorophyll fluorescence and a global database of plant traits, all of which show that croplands have a higher photosynthetic capacity than other vegetation types. The large contribution of CO 2 is also supported by a meta-analysis of 466 manipulative experiments and 15 terrestrial biosphere models. Moreover, we show that the contribution of GPP max to the change in annual GPP is less in the tropics than in other regions. These multiple lines of evidence reveal an increasing trend in the peak growth of global vegetation. These results draw attention to the vital roles of agricultural intensification and atmospheric changes in reshaping the seasonality of global vegetation growth.

59 BASIC BIOLOGICAL SCIENCES↗

Allele-defined genome of the autopolyploid sugarcane Saccharum spontaneum L.

Modern sugarcanes are polyploid interspecific hybrids, combining high sugar content from Saccharum officinarum with hardiness, disease resistance and ratooning of Saccharum spontaneum. Sequencing of a haploid S. spontaneum, AP85-441, facilitated the assembly of 32 pseudo-chromosomes comprising 8 homologous groups of 4 members each, bearing 35,525 genes with alleles defined. The reduction of basic chromosome number from 10 to 8 in S. spontaneum was caused by fissions of 2 ancestral chromosomes followed by translocations to 4 chromosomes. Surprisingly, 80% of nucleotide binding site-encoding genes associated with disease resistance are located in 4 rearranged chromosomes and 51% of those in rearranged regions. Resequencing of 64 S. spontaneum genomes identified balancing selection in rearranged regions, maintaining their diversity. Introgressed S. spontaneum chromosomes in modern sugarcanes are randomly distributed in AP85-441 genome, indicating random recombination among homologs in different S. spontaneum accessions. The allele-defined Saccharum genome offers new knowledge and resources to accelerate sugarcane improvement.

09 BIOMASS FUELS↗

Robust surface coating for a fast, facile fluorine-18 labeling of iron oxide nanoparticles for PET/MR dual-modality imaging

Grafting a robust organic shell around inorganic nanoparticles can optimize their colloidal features to dramatically improve their physicochemical properties. Here, we have developed a polymer coating procedure for providing colloidal stability to the nanoparticles and, more importantly, for applying a fast, facile fluorine-18 labeling of iron oxide nanoparticles (IONPs) for positron emission tomography (PET)/magnetic resonance (MR) dual-modality imaging. The structure of the amphiphilic polymer is based on a backbone of polyacrylic acid, conjugated with multiple oleylamines to form a comb-like branched structure. The dense polymer shell provides high colloidal stability to the IONPs against harsh conditions such as high temperature, low pH value, and high ion strength. By incorporating a 1,4,7-triazacyclononane (NOTA) chelator to the comb-like amphiphilic polymer for the chelation of aluminum fluoride ions, we applied a one-step radiolabeling approach for a fast, facile radiofluorination of magnetic nanoparticles. The new strategy can significantly reduce the procedure time and radiation exposure. In conclusion, the PET/MR dual modality imaging was successfully achieved in living subjects by using 18 F labeled magnetic nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Formation of open ruthenium branched structures with highly exposed active sites for oxygen evolution reaction electrocatalysis

The formation of exposed active sites that have high activity and stability for oxygen evolution reaction (OER) catalysis is a significant opportunity for improving water electrolysers. Low-index facets surface Ru can achieve both high activity and stability for OER. Here, we present a new catalyst design where low-index faceted Ru branches are grown off the corners of Pt nanocubes, forming open Ru branched nanoparticles. This open branched structure, exposing low-index facets on its length-tunable branch, enables a high electrochemically active surface area (ECSA), achieving high activity and stability for OER. This design strategy and synthetic control provide a principle for achieving high-performance OER nanocatalysts.

Xiao, Sa [The University of New South Wales, Sydne↗

Increased ferromagnetic resonance linewidth and exchange anisotropy in NiFe/FeMn bilayers

In the past investigations, the exchange-biased bilayers show much larger ferromagnetic resonance (FMR) linewidth than that of single ferromagnetic layer films. However, the mechanism of the large linewidth remains controversial. In this paper, the FMR linewidths of NiFe/FeMn bilayers prepared by dc magnetron sputtering system are systematically studied. Besides the intrinsic damping and magnetic inhomogeneity, the extrinsic relaxation based on two-magnon scattering process should be also considered to explain the strong in-plane angular dependence of the linewidths. The fitting of the out-of-plane angular dependence of the linewidths shows that the intrinsic Gilbert damping effect plays a major role in the increased linewidth in the bilayers. The value of the g factor increases due to the effect of the exchange coupling at the NiFe/FeMn interface, resulting in an enhancement in the Gilbert damping factor G. The fitting results indicate that the line broadening of the exchange-biased films is related to the exchange anisotropy. The effects of FeMn layer thickness, growth sequence of FeMn layer, and temperature on the linewidths further approve this interpretation.

36 MATERIALS SCIENCE↗

Demonstration of Flying Mirror with Improved Efficiency

A strongly nonlinear wake wave driven by an intense laser pulse can act as a partially reflecting relativistic mirror (the flying mirror)[S. V. Bulanov, et al., Bulletin of the Lebedev Physics Institute, No. 6, 9 (1991); S. V. Bulanov, et al., Phys. Rev. Lett. 91, 085001 (2003)]. Upon reflection from such mirror, a counter-propagating optical-frequency laser pulse is directly converted into high-frequency radiation, with a frequency multiplication factor approx4gamma{sup 2}(the double Doppler effect). We present the results of recent experiment in which the photon number in the reflected radiation was at least several thousand times larger than in our proof-of-principle experiment [M. Kando, et al., Phys. Rev. Lett. 99, 135001 (2007); A. S. Pirozhkov, et al., Phys. Plasmas 14, 123106 (2007)]. The flying mirror holds promise of generating intense coherent ultrashort XUV and x-ray pulses that inherit their temporal shape and polarization from the original optical-frequency (laser) pulses. Furthermore, the reflected radiation bears important information about the reflecting wake wave itself, which can be used for its diagnostics.

07 ISOTOPE AND RADIATION SOURCES↗

Measurement of the electron density in a microwave plasma torch at atmospheric pressure

The electron density in a microwave plasma torch at atmospheric pressure was measured with a Mach-Zehnder interferometer. The electron density is on the order of 10{sup 17}/cm{sup 3}, one order higher than that deduced from the Stark broadening of spectral lines, and increases with the increase in the microwave power. The spatial distribution of the electron density was obtained. The highest electron density locates at the symmetrical axis of the plasma torch and decreases radially. It was found that the electron density fluctuates within a range of 0.3 with the time under the same experimental conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Recovery of gas density in a nitrogen gap after breakdown

The recovery of the gas density and the hold-off voltage of a spark gap after breakdown were investigated with Mach-Zehnder interferometry and two-pulse method, respectively. It was shown that the gas density in a 2.7 mm gap filled with atmospheric nitrogen almost fully recovers at t=50 ms but the breakdown voltage of the gap only recovers to its static hold-off voltage, about 21.4% of its original overvolted breakdown voltage. The mechanisms for the delayed recovery of the ability to be overvolted were discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Micro focusing of fast electrons with opened cone targets

Using opened reentrant cone silicon targets, we have demonstrated the effect of micro focusing of fast electrons generated in intense laser-plasma interactions. When an intense femtosecond laser pulse is focused tightly onto one of the side walls of the cone, fast electron beam emitted along the side wall is observed. When a line focus spot, which is long enough to irradiate both of the side walls of the cone simultaneously, is used, two electron beams emitted along each side wall, respectively, are observed. The two beams should cross each other near the open tip of the cone, resulting in micro focusing. We use a two-dimensional Particle-In-Cell code to simulate the electron emission both in opened and closed cone targets. The simulation results of the opened cone targets are in agreement with the experimental observation while the results of the closed cone targets do not show the micro focusing effect.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical studies of third-harmonic generation in laser filament in air perturbed by plasma spot

Third-harmonic emission from laser filament intercepted by plasma spot is studied by numerical simulations. Significant enhancement of the third-harmonic generation is obtained due to the disturbance of the additional plasma. The contribution of the pure plasma effect and the possible plasma-enhanced third-order susceptibility on the third-harmonic generation enhancement are compared. It is shown that the plasma induced cancellation of destructive interference [Y. Liu et al., Opt. Commun. 284, 4706 (2011)] of two-colored filament is the dominant mechanism of the enhancement of third-harmonic generation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Upper limit power for self-guided propagation of intense lasers in plasma

It is shown that there is an upper-limit laser power for self-focusing of a laser pulse in plasma in addition to the well-known lower-limit critical power set by the relativistic effect. This upper limit is caused by the transverse ponderomotive force of the laser, which tends to expel plasma electrons from the laser propagating area. Furthermore, there is a lower-limit plasma density for a given laser spot size, below which self-focusing does not occur for any laser power. Both the lower-limit density and the upper-limit power are derived theoretically and verified by two-dimensional and three-dimensional particle-in-cell simulations. It is also found that plasma channels may be unfavorable for stable guiding of lasers above the upper-limit power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quasimonoenergetic collimated electron beams from a laser wakefield acceleration in low density pure nitrogen

A laser wakefield acceleration (LWFA) experiment is performed using 30 TW, 30 fs, and 800 nm laser pulses, focused onto pure nitrogen plasma having relatively low densities in the range of 0.8×10{sup 18} cm{sup −3} to 2.7×10{sup 18} cm{sup −3}. Electron beams having a low divergence of ∼3 mrad (full-width at half-maximum) and quasi-monoenergetic peak energies of ∼105 MeV are achieved over 4-mm interaction length. The total electron beam charge reached to 2 nC, however, only 1%–2% of this (tens of pC) had energies >35 MeV. We tried different conditions to optimize the electron beam acceleration; our experiment verifies that lower nitrogen plasma densities are generating electron beams with high quality in terms of divergence, charge, pointing stability, and maximum energy. In addition, if LWFA is to be widely used as a basis for compact particle accelerators in the future, therefore, from the economic and safety points of view we propose the use of nitrogen gas rather than helium or hydrogen.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An efficient gigawatt level X-band Cerenkov type oscillator without guiding magnetic field

This paper presents a novel modification of gigawatt level X-band Cerenkov type high power microwave oscillator without guiding magnetic field. A confining cathode is put forward to suppress the radial dispersion of the annular relativistic electron beam and accordingly improve its axial transportation to ensure further beam-wave interaction. An overmoded nonuniform slow wave structure is adopted in order to increase the power capacity of the oscillator and the efficiency of beam-wave interaction. A tapered collector is used to collect the beam, increase the Q-factor, and extract the microwave favorably. The simulation results indicate that a microwave is generated by the proposed oscillator with output power of 1.9 GW and frequency of 9.02 GHz, when the diode voltage and beam current are 620 kV and 9 kA, respectively. The corresponding power conversion efficiency is 34%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Generation of electron beams from a laser wakefield acceleration in pure neon gas

We report on the generation of quasimonoenergetic electron beams by the laser wakefield acceleration of 17–50 TW, 30 fs laser pulses in pure neon gas jet. The generated beams have energies in the range 40–120 MeV and up to ∼430 pC of charge. At a relatively high density, we observed multiple electron beamlets which has been interpreted by simulations to be the result of breakup of the laser pulse into multiple filaments in the plasma. Each filament drives its own wakefield and generates its own electron beamlet.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhanced Raman scattering assisted by ultrahigh order modes of the double metal cladding waveguide

Distinguished from the usual strategy to enhance the Raman scattering such as creating hot spots in the surface-enhanced Raman scattering, this paper takes a quite different approach based on the double metal cladding waveguide. The target analyte is located in the guiding layer of sub-millimeter scale, where several ultrahigh order modes with high intensity are simultaneously excited via a focused laser beam. The experimental setup is simple, and both simulation and experimental results confirm the enhancement mechanism of these oscillating modes. Other appealing features include the large detection area and the ability to excite guided modes via both polarizations. This scheme can be applied to large molecules detection and readily integrated with other Raman enhancement techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗