Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIBS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Impact of Silicon Impurity on the Hydrometallurgical Recovery of NCM622 Cathode

Hydrometallurgy is one of the best approaches to date for recycling LIBs due to its high efficiency, low energy usage, and industrial scalability. However, impurities have always been a thorny issue because they could have unintended impacts on the recovered cathode materials. This research marks the first systematic investigation into the influence of silicon impurity on the LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) cathode obtained from hydrometallurgical recycling. Here we find that silicon nanoparticles will be nucleated at the center of the precursor particles during co-precipitation synthesis, and the silicon core will slowly dissolve in the surrounding ammonia, creating a special hollow structure in the particle. More importantly, the dissolution of silicon impurity will eventually lead to the deposition of silicates in the cathode material, which is an unfavorable result. Test data indicate that NCM622 cathode with 5 at% silicon has a capacity of 148.8 mAh g −1 after 100 cycles at 1/3 C, approximately 10 mAh g −1 lower than the virgin. Despite being relatively mild, the adverse influence of silicon impurity in hydrometallurgical recycling still requires attention.

25 ENERGY STORAGE↗
DOE OSTI2025

Electrolyte Compatible Separator Materials for Sodium-Ion Battery

Sodium-ion batteries (NIBs) have emerged as an alternative electrochemical energy storage to replace lithium-ion batteries (LIBs). Separator is one of the key components that dictates the cell performance of NIB. Significant progress has been made in electrolyte research, however for most cases glass fiber has been used as separator due to its remarkable electrolyte wettability despite its many disadvantages. In this study, we evaluated commercially available porous materials as separator material for NIB. Porous polyvinylidene fluoride (PVDF) membrane stands out as a universal separator which exhibits high compatibility with a wide range of electrolytes and electrodes and demonstrates high electrochemical stability evaluated in hard carbon/Na half cells and NaNi 1/3 Fe 1/3 Mn 1/3 O 2 (NFM111)/hard carbon full cells. This research highlights the PVDF membrane as a viable separator for advancing NIB research, enabling the development of new electrolyte materials without the separator constraints of wetting limitations or excessive electrolyte consumption.

Wostoupal, Owen S. [Argonne National Laboratory (A↗
DOE OSTI2025

Cycling Performance and Structure Evolution of Co-Free Lithium- and Manganese-Rich Layered Oxides in Lithium-Ion Batteries

Lithium- and manganese-rich (LMR) layered oxides are high-capacity cathode materials that are being considered for electric vehicle (EV) lithium-ion batteries (LIBs). Here, we investigate the electrochemical cycling behavior of cells containing a cobalt-free LMR oxide, 0.3Li 2 MnO 3 ·0.7LiMn 0.5 Ni 0.5 O 2 , paired with either Li or graphite anodes. Two- and three-electrode cells are cycled under varying conditions to examine the effects of oxide activation, upper cutoff voltage, separator type, and electrolyte composition. Post-cycling characterization of harvested electrodes, with electrochemical, X-ray absorption spectroscopy, and solid-state 6 Li nuclear magnetic resonance spectroscopy techniques, are used to correlate cell performance changes with redox state evolution in the oxide and Li inventory shifts in the cell. Our results show that capacity fade and impedance rise primarily originate at the graphite anode and LMR cathode, respectively. Notably, while Ni undergoes reversible redox, Mn shows no evidence of bulk redox activity even in highly-aged electrodes: only relithiated LMR electrodes show some reduction of Mn. Graphite electrodes degrade due to particle isolation and SEI growth, exacerbated by Mn dissolution and deposition on graphite anodes. These findings highlight the coupled structural and electrochemical degradation mechanisms in LMR/graphite cells and underscore lithium inventory retention and electrode interfacial stability as critical factors for enhancing long-term performance.

Badami, Pavan P. [Argonne National Laboratory (ANL↗
DOE OSTI2020

slaclab/atlas-rd53-fw-lib

This is the repository for "atlas-rd53-fw-lib" developed by SLAC National Accelerator Laboratory.

Ruckman, Larry↗
DOE OSTI2023

Tokenized Data for FORGE Foundation Models

This dataset comprises a vast corpus of 257 billion tokens, accompanied by the corresponding vocabulary file employed in the pre-training of FORGE foundation models. The primary data source for this corpus is scientific documents derived from diverse origins, and they have been tokenized using the Hugging Face BPE tokenizer. Further details about this research can be found in the publication titled FORGE: Pre-Training Open Foundation Models for Science authored by Junqi Yin, Sajal Dash, Feiyi Wang, and Mallikarjun (Arjun) Shankar, presented at SC'23. The data tokenization pipeline and resulting artifacts use CORE data [Ref: Knoth, P., and Zdrahal, Z. (2012). CORE: three access levels to underpin open access. D-Lib Magazine, 18(11/12)]. For use of these data sets for any purpose, please follow the guidelines provided in https://core.ac.uk/terms .

Yin, Junqi↗
DOE OSTI2025

Application of deep learning to single-shot gas-phase laser-induced breakdown spectroscopy

Single-shot fs laser-induced breakdown spectroscopy (LIBS) has the potential to capture ns-scale electrode desorption phenomena in pulsed power fusion drivers. However, the successful implementation of the diagnostic for this purpose is challenging, as it requires interpreting single-shot measurements collected from low-density gas mixtures. In this work, we demonstrate the efficacy of a Bayesian-optimized convolutional neural network (CNN) to interpret these measurements. We generated 256 distinct measurement conditions at relevant gas pressures ranging from 80–530 mTorr by mixing 100–250 sccm H 2 and 50–200 sccm CH 4 in increments of 10 sccm. Despite the considerable overlap between signals separated by 20 sccm, the CNN is able to predict the H 2 flow rate with a root-mean-square error (RMSE) of 15.9 sccm and the CH 4 flow rate with an RMSE of 12.0 sccm. The average relative prediction error is <9% for each gas and largely remains below or near 10%.

Brown, Nathan Parnell [Sandia National Lab. (SNL-N↗
DOE OSTI2026

Forensic characterization of surrogate nuclear explosion debris: radiochemical and spectroscopic strategies for method validation

Surrogate nuclear explosion debris (SNED) has emerged as a critical platform for advancing post-detonation nuclear forensic analysis in the absence of readily accessible historic materials. SNED enables controlled investigation and validation of analytical methodologies used to interrogate the chemical, isotopic, radiological, and microstructural signatures preserved in nuclear explosion debris. This review presents an integrated assessment of destructive and non-destructive analytical techniques commonly employed within decision-driven nuclear forensic workflows. Each technique is discussed individually while highlighting how it contributes to different stages of post-detonation analysis. Core methods – including gamma and alpha spectrometry, ICP-MS, TIMS, SIMS, SEM-EDS, XRF, LIBS, vibrational spectroscopy, and X-ray absorption spectroscopy – are critically evaluated with respect to forensic maturity, information content, and matrix limitations. Emphasis is placed on the role of SNED in benchmarking multi-modal workflows and identifying gaps in reproducing heterogeneity, fractionation, and radiation-driven evolution relevant to forensic attribution.

X-ray spectroscopic methods↗
DOE OSTI2025

Enhancement of the electrochemical performance of LiFePO 4 cathode material by nanosecond laser annealing

Pulsed laser annealing of LiFePO 4 can improve conductivity by increasing oxygen vacancy-related defect concentration; this approach can improve the current carrying capacity of LIB cathodes from 135 to 145 mAh g −1 under optimized conditions. Since the depth of the laser annealing region is less than 1 µm, the increase is equivalent to a 125% overall improvement in the charge capacity if the entire thickness of the LiFePO 4 region is treated by pulsed laser annealing. Pulsed laser annealing has two primary effects on the atomic structure of LiFePO 4 , namely an increase in anionic vacancy concentration and antisite defect concentration.

25 ENERGY STORAGE↗
DOE OSTI2024

cppTPSA/pyTPSA: a C++/Python package for truncated power series algebra

The truncated power series algebra (TPSA), also referred to as differential algebra (DA), is a well-established and widely used method in particle accelerator physics and astronomy. The most straightforward usage of TPSA/DA is to calculate the Taylor expansion of a given function at a specific point up to order ?. In recent years, as the application of TPSA/TA has been extended to other fields, a reusable implementation of TPSA/DA as a modern C++ library or other high level programming language like Python has become desirable. The cppTPSA package implements TPSA/DA in C++11 and provides developers a convenient library with which to build advanced TPSA/DA-based methods. A Python 3 library, pyTPSA, has also been developed based on the C++ lib.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Fundamental Investigations of Mechanical and Chemical Degradation Mechanisms in Lithium Ion Battery Materials (Final Technical Report)

The objective of our effort under the DOE EPSCoR Implementation grant is to establish a comprehensive and internationally recognized research program at Brown University and University of Rhode Island in understanding degradation mechanisms and to improve the cycle and calendar life of lithium ion battery (LIB) materials. A series of basic investigations are undertaken to characterize the mechanical and chemical degradation mechanisms, which can help enable new higher capacity and longer lasting electrode designs. Controlling mechanical and chemical degradation is the primary challenge in developing the next generation of higher energy density batteries. The development of failure resistant battery microstructures will require a fundamental understanding of the evolution of stress, deformation, damage, and electrochemistry in battery materials during cyclic charging and discharging. In addition, controlling the reactions at the electrode/electrolyte interface is critical for the formation of a stable SEI layer. We address these issues through a combination of controlled experiments on model battery materials and practical composite electrodes, together with multi-scale computations. Our effort is organized into three focus areas that encompass many critical challenges in Lithium Ion Battery Technologies: (i) Mechanical properties, fracture and damage in electrode materials; (ii) Chemistry and Mechanics of Solid Electrolyte Interphase (SEI); (iii) Mechanical and Chemical Integrity of Solid-Solid Interfaces in Practical Electrodes.

25 ENERGY STORAGE↗
DOE OSTI2020

Housedon-Hill - A ChemCam/RMI mega mosaic to investigate distant features

The ChemCam Remote Microscopic Imager (RMI) onboard Curiosity was originally designed to document the tiny areas analyzed by ChemCam’s laser-induced breakdown spectroscopy (LIBS) technique on rocks at few meters distance around the rover. The RMI produces 1024 x 1024 pixel black and white images directly from ChemCam’s telescope focal plane. Early in the mission, it was recognized that, thanks to its powerful optics, RMI could also play a role as a long-distance reconnaissance tool, complementing other cameras on the remote sensing mast, and taking advantage of its very long 700 mm focal length. Imaging areas several kilometers from the rover provides pictures that are very complementary to orbital observations and gives a more human-like, ground-based perspective. Between sols 2878 and 2921, Curiosity stayed parked at the same place to perform various rock sampling analyses. This opportunity was used to target very distant areas of interest, daily building an RMI mosaic of 216 overlapping images covering an area ranging from the bottom layers of Mount Sharp to the edge of Vera Rubin Ridge. This product is so far the largest RMI mosaic acquired during the entire mission.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Cooperative Research and Development Agreement between National Energy Technology Laboratory and Ohio University [Abstract]

Ohio University and NETL will collaborate in the area of hydraulic fracturing and chemical treatment of gas and oil producing subsurface formations. The collaboration will provide Ohio University access to the J200 LIBS measurement machine, as well as training, facilities, and experts at NETL. NETL will gain access to Ohio University’s Point Pleasant formation shale samples and analysis results. The goal of this project is to determine the effects of chemical exposure on the face of the shale samples and how this exposure may affect hydrocarbon production. This work could help bring understanding to hydrocarbon movement within this formation and the effect hydraulic fracturing and other chemical treatments have on long-term hydrocarbon production. During this project the two parties will work together to generate and analyze experimental data from shale samples to develop a journal paper co-authored by both parties.

02 PETROLEUM↗
DOE OSTI2021

Cold Testing for Characterization of Oxide Feed Impurities in Support of the ARIES Program

The Advanced Recovery and Integrated Extraction System (ARIES) Program converts surplus plutonium metal components into an oxide powder form and packages the material for final disposition. In support of the ARIES program, over a metric ton (MT) of plutonium has been removed from surplus nuclear weapons since 1998 and packaged for long-term storage in 3013 cans. The oxide production rate is anticipated to increase substantially over the next decade in support of dilute and dispose goals. Analytical chemistry data from destructive analysis of the resulting 70+ blend lots to date has been reported for contaminants in the product oxide. Changes in the Pu product specification for Pu oxide product, induced by a different pit mix, the LANL swap program and processing Alternate (non-Pit Pu) Feed Stock (AFS) metals, will affect the level and the mix of these contaminants in the upcoming years. With these changes in feed material, it will be important to provide fast and efficient measurement of elemental impurities in the oxide to be certain that the process is under control and to monitor the anticipated changes from the historical blend lot data. Non-destructive methods need to be evaluated for the characterization of the plutonium oxide product and the quantification of the impurities at the current and anticipated levels. A feasibility study has begun to investigate the applicability of new spectroscopic methods for oxide impurity characterization. To this end, here we describe the preparation of surrogate materials to support these investigations, and the results of a feasibility study investigating the use of LIBS (Laser Induced Breakdown Spectroscopy) to characterize the surrogate materials as calibration standards.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Cooperative Research and Development Agreement between National Energy Technology Laboratory and University of Texas at Austin [Abstract]

The project is a collaboration in the area of water filtration, including for produced waters from subsurface formations. The collaboration will provide University of Texas at Austin access to the J200 LIBS measurement machine, as well as training, facilities, and experts at NETL. NETL will gain access to UTA’s proprietary membrane samples and analysis results. The goal of this project is to determine the effects of ion depth penetration as a function of exposure on the face of the membrane samples and how this exposure may affect overall filtration efficiency. This work could help bring understanding to improved water filtration for contaminated produced waters. During this project the two parties will work together to generate and analyze experimental data from the novel filter samples to develop a journal paper co-authored by both parties.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Lithium-Ion Battery Supply Chain for E-Drive Vehicles in the United States: 2010–2020

Understanding the battery supply chain is particularly important for the strategic planning and development of a battery recycling infrastructure to secure critical materials supply and enable a circular economy. Argonne has been tracking plug-in electric vehicle (PEV) sales in the United States (U.S.) by make and model since December 2010, when the Chevrolet Volt and Nissan Leaf were first sold in the U.S. Building on detailed monthly sales data, this report summarizes the manufacturing and production locations of lithium-ion (Li-ion, or LIB) battery cells and packs by make and model for PEVs sold in the U.S. from 2010 to 2020. It also summarizes the annual and cumulative Li-ion battery capacity installed in hybrid electric vehicles (HEVs) sold in the U.S. Overall, there are about 20 different battery cell and pack manufacturers, which are currently supplying about 20 gigawatt-hours (GWh) of batteries annually for the U.S. PEV market. Panasonic and LG Chem are the largest cell suppliers to the U.S. market. Beyond the U.S, South Korea and Japan are major countries supplying PEV batteries to the U.S. market.

25 ENERGY STORAGE↗
DOE OSTI2021

Neural Density Estimation and Uncertainty Quantification for ChemCam Spectra [Slides]

The ChemCam instrument of Curiosity uses laser-induced breakdown spectroscopy (LIBS). It fires a laser at target and vaporizes rock surfaces, creating a plasma. Three spectrographs divide the plasma light into wavelengths for chemical analysis: ultraviolet, violet, and visible near-infrared. Regression methods (SVR, PCR, CNN) have been employed for calibration (prediction of the elemental composition of samples); however, labeled ChemCam samples are limited. Here, we focus on unsupervised learning and employ generative models from ChemCam analysis. Further, we use labels (supervised) in combination to the generative model to compute uncertainties related to predictions. We report generative modeling can be successfully applied to model real-world data. Normalizing flow models can be efficiently constructed on latent spaces for fast downstream inference. Unsupervised and supervised learning can be combined to form an uncertainty quantification framework.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Solid State Ionics: Materials Development by Multiscale Modeling and Advanced Manufacturing Techniques

Solid-state ionic materials are an important enabling technology for energy conversion and storage. Solid-state batteries would be a safer and higher energy density alternative to commercially available lithium ion batteries (LIB), however their implementation requires ion conduction in solids at room temperature to occur on the same level as the current generation of liquid electrolytes. Microstructural modifications have been demonstrated to play a major role on ion transport through the control of grain boundary interfaces, which traditionally serve as “blocking” layers. Ultimately, these materials will be fabricated in thin films form as electrolytes in order to minimize ohmic losses in electrochemical devices. This work uses advanced manufacturing techniques in combination with theoretical modeling to implement a science-based approach in the deposition of thin films ion conductors with controlled microstructures used in ceramic energy conversion and storage devices.

25 ENERGY STORAGE↗