Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEVEL WIDTHS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Molecular photoionization cross sections by Stieltjes-Chebyshev moment theory applied to Lanczos pseudospectra

Stieltjes imaging technique is widely used for the ab initio computation of photoionization cross sections and decay widths. The main problem hampering the application of the standard Stieltjes imaging algorithms in conjunction with high-level ab initio methods to polyatomic molecules is the requirement of full diagonalization of excessively large Hamiltonian matrices. Here we show that the full diagonalization bottleneck can be overcome by applying the Stieltjes imaging procedure to Lanczos pseudospectrum of the atomic or molecular Hamiltonian. Using the helium and neon atoms as examples, we demonstrate that the Lanczos pseudospectrum obtained after only a relatively small number of iterations can be used for Stieltjes-type calculations of photoionization cross sections essentially without loss of accuracy. The new technique is applied to the calculation of the total photoionization cross section of benzene within an ab initio approach explicitly taking into account single and double electronic excitations. Good agreement with experimental results is obtained.

74 ATOMIC AND MOLECULAR PHYSICS↗

Midinfrared intersubband absorption in GaN/AlGaN superlattices on Si(111) templates

We report on the observation of midinfrared intersubband absorption in Si-doped GaN/AlGaN superlattices grown by plasma-assisted molecular-beam epitaxy on semi-insulating GaN-on-Si(111) templates. TM-polarized absorption attributed to transition between the first two electronic levels in the quantum wells peaked in the range from 2 to 9 {mu}m. The relative spectral width remains around 20% in the whole midinfrared spectral range. Doping is predicted to have a large influence on the intersubband absorption energy due to screening of polarization-induced internal electric field.

36 MATERIALS SCIENCE↗

Measurement of transient atomic displacements in thin films with picosecond and femtometer resolution

We report measurements of the transient structural response of weakly photo-excited thin films of BiFeO 3 , Pb(Zr,Ti)O 3 , and Bi and time-scales for interfacial thermal transport. Utilizing picosecond x-ray diffraction at a 1.28 MHz repetition rate with time resolution extending down to 15 ps, transient changes in the diffraction angle are recorded. These changes are associated with photo-induced lattice strains within nanolayer thin films, resolved at the part-per-million level, corresponding to a shift in the scattering angle three orders of magnitude smaller than the rocking curve width and changes in the interlayer lattice spacing of fractions of a femtometer. The combination of high brightness, repetition rate, and stability of the synchrotron, in conjunction with high time resolution, represents a novel means to probe atomic-scale, near-equilibrium dynamics.

36 MATERIALS SCIENCE↗

X-ray characterization of the Icarus ultrafast x-ray imager

Ultrafast x-ray imagers developed at Sandia National Laboratories are a transformative diagnostic tool in inertial confinement fusion and high energy density physics experiments. The nanosecond time scales on which these devices operate are a regime with little precedent, and applicable characterization procedures are still developing. This paper presents pulsed x-ray characterization of the Icarus imager under a variety of illumination levels and timing modes. Results are presented for linearity of response, absolute sensitivity, variation of response with gate width, and image quality.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Study of transitions in thulium atoms in the 410-420-nm range for laser cooling

The possibility of laser cooling of thulium atoms is considered. The hyperfine structure of almost cyclic 4f{sup 13}6s{sup 2} (J{sub g} = 7/2) {r_reversible} 4f{sup 12}5d{sub 3/2}6s{sup 2} (J{sub e} = 9/2) and 4f{sup 13}6s{sup 2} (J{sub g} = 7/2) {r_reversible} 4f{sup 12}5d{sub 5/2}6s{sup 2} (J{sub e} = 9/2) transitions at 410.6 and 420.4 nm, respectively, is studied by the method of sub-Doppler saturation spectroscopy in counterpropagating laser beams. The hyperfine splitting of excited levels involved in these transitions is measured and the natural linewidths of these transitions are determined. The structure of the neighbouring 4f{sup 13}6s6p (J{sub e} = 5/2) and 4f{sup 12}5d{sub 5/2}6s{sup 2} (J{sub e} = 7/2) levels is studied for the first time by this method. The decay probabilities of the J{sub e} = 9/2 levels via channels removing atoms from the cooling cycle are calculated. It is found that the branching ratio for the strong transition at 410.6 nm (A = 6x10{sup 7} s{sup -1}) is smaller than 2x10{sup -5}, which makes this transition most promising for laser cooling. The laser cooling of atoms in a Zeeman cooler at this transition is simulated. The possibility of using a laser-cooled cloud of thulium atoms to study the metrological transition at 1.14 {mu}m is discussed. (laser cooling of atoms)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear magneto-optical resonances at D{sub 1} excitation of {sup 85}Rb and {sup 87}Rb in an extremely thin cell

Nonlinear magneto-optical resonances have been measured in an extremely thin cell (ETC) for the D{sub 1} transition of rubidium in an atomic vapor of natural isotopic composition. All hyperfine transitions of both isotopes have been studied for a wide range of laser power densities, laser detunings, and ETC wall separations. Dark resonances in the laser induced fluorescence (LIF) were observed as expected when the ground-state total angular momentum F{sub g} was greater than or equal to the excited-state total angular momentum F{sub e}. Unlike the case of ordinary cells, the width and contrast of dark resonances formed in the ETC dramatically depended on the detuning of the laser from the exact atomic transition. A theoretical model based on the optical Bloch equations was applied to calculate the shapes of the resonance curves. The model, which had been developed previously for ordinary vapor cells, averaged over the contributions from different atomic velocity groups, considered all neighboring hyperfine transitions, took into account the splitting and mixing of magnetic sublevels in an external magnetic field, and included a detailed treatment of the coherence properties of the laser radiation. Such a theoretical approach had successfully described nonlinear magneto-optical resonances in ordinary vapor cells. However, to describe the resonances in the ETC, key parameters such as the ground-state relaxation rate, excited-state relaxation rate, Doppler width, and Rabi frequency had to be modified significantly in accordance with the ETC's unique features. The level of agreement between the measured and calculated resonance curves achieved for the ETC was similar to what could be accomplished for ordinary cells. However, in the case of the ETC, it was necessary to fine-tune parameters such as the background and the Rabi frequency for different transitions, whereas for the ordinary cells, these parameters were identical for all transitions.

74 ATOMIC AND MOLECULAR PHYSICS↗

All-optical production of a lithium quantum gas using narrow-line laser cooling

We have used the narrow 2S{sub 1/2}{yields}3P{sub 3/2} transition in the ultraviolet (uv) to laser cool and magneto-optically trap (MOT) {sup 6}Li atoms. Laser cooling of lithium is usually performed on the 2S{sub 1/2}{yields}2P{sub 3/2} (D2) transition, and temperatures of {approx}300 {mu}K are typically achieved. The linewidth of the uv transition is seven times narrower than the D2 line, resulting in lower laser cooling temperatures. We demonstrate that a MOT operating on the uv transition reaches temperatures as low as 59 {mu}K. Furthermore, we find that the light shift of the uv transition in an optical dipole trap at 1070 nm is small and blueshifted, facilitating efficient loading from the uv MOT. Evaporative cooling of a two spin-state mixture of {sup 6}Li in the optical trap produces a quantum degenerate Fermi gas with 3x10{sup 6} atoms in a total cycle time of only 11 s.

74 ATOMIC AND MOLECULAR PHYSICS↗

TU-H-CAMPUS-JeP1-05: Dose Deformation Error Associated with Deformable Image Registration Pathways

Purpose: To evaluate errors associated with using different deformable image registration (DIR) pathways to deform dose from planning CT (pCT) to cone-beam CT (CBCT). Methods: Deforming dose is controversial because of the lack of quality assurance tools. We previously proposed a novel metric to evaluate dose deformation error (DDE) by warping dose information using two methods, via dose and contour deformation. First, isodose lines of the pCT were converted into structures and then deformed to the CBCT using an image based deformation map (dose/structure/deform). Alternatively, the dose matrix from the pCT was deformed to CBCT using the same deformation map, and then the same isodose lines of the deformed dose were converted into structures (dose/deform/structure). The doses corresponding to each structure were queried from the deformed dose and full-width-half-maximums were used to evaluate the dose dispersion. The difference between the FWHM of each isodose level structure is defined as the DDE. Three head-and-neck cancer patients were identified. For each patient, two DIRs were performed between the pCT and CBCT, either deforming pCT-to-CBCT or CBCT-to-pCT. We evaluated the errors associated by using either of these pathways to deform dose. A commercially available, Demons based DIR was used for this study, and 10 isodose levels (20% to 105%) were used to evaluate the errors in various dose levels. Results: The prescription dose for all patients was 70 Gy. The mean DDE for CT-to-CBCT deformation was 1.0 Gy (range: 0.3–2.0 Gy) and this was increased to 4.3 Gy (range: 1.5–6.4 Gy) for CBCT-to-CT deformation. The mean increase in DDE between the two deformations was 3.3 Gy (range: 1.0–5.4 Gy). Conclusion: The proposed DDF was used to quantitatively estimate dose deformation errors caused by different pathways to perform DIR. Deforming dose using CBCT-to-CT deformation produced greater error than CT-to-CBCT deformation.

60 APPLIED LIFE SCIENCES↗

Electron in the field of flexural vibrations of a membrane: Quantum time, magnetic oscillations, and coherence breaking

We have studied the motion of an electron in a membrane under the influence of flexural vibrations with a correlator that decreases upon an increase in the distance in accordance with the law r–{sup 2η}. We have conducted a detailed consideration of the case with η < 1/2, in which the perturbation theory is inapplicable, even for an arbitrarily weak interaction. It is shown that, in this case, reciprocal quantum time 1/τ{sub q} is proportional to g{sup 1/(1–η)}T{sup (2–η)/(2–2η)}, where g is the electron–phonon interaction constant and T is the temperature. The method developed here is applied for calculating the electron density of states in a magnetic field perpendicular to the membrane. In particular, it is shown that the Landau levels in the regime with ω{sub c}τ{sub q} » 1 have a Gaussian shape with a width that depends on the magnetic field as B{sup η}. In addition, we calculate the time τ{sub φ} of dephasing of the electron wave function that emerges due to the interaction with flexural phonons for η < 1/2. It has been shown that, in several temperature intervals, quantity 1/τ{sub φ} can be expressed by various power functions of the electron–phonon interaction constant, temperature, and electron energy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Influence of Shear on Deep Convection Initiation. Part II: Simulations

Abstract This study evaluates a hypothesis for the role of vertical wind shear in deep convection initiation (DCI) that was introduced in Part I by examining behavior of a series of numerical simulations. The hypothesis states, “Initial moist updrafts that exceed a width and shear threshold will ‘root’ within a progressively deeper steering current with time, increase their low-level cloud-relative flow and inflow, widen, and subsequently reduce their susceptibility to entrainment-driven dilution, evolving toward a quasi-steady self-sustaining state.” A theoretical model that embodied key elements of the hypothesis was developed in Part I, and the behavior of this model was explored within a multidimensional environmental parameter space. Remarkably similar behavior is evident in the simulations studied here to that of the theoretical model, both in terms of the temporal evolution of DCI and in the sensitivity of DCI to environmental parameters. Notably, both the simulations and theoretical model experience a bifurcation in outcomes, whereby nascent clouds that are narrower than a given initial radius R 0 threshold quickly decay and those above the R 0 threshold undergo DCI. An important assumption in the theoretical model, which states that the cloud-relative flow of the background environment V CR determines cloud radius R , is scrutinized in the simulations. It is shown that storm-induced inflow is small relative to V CR beyond a few kilometers from the updraft edge, and V CR therefore plays a predominant role in transporting conditionally unstable air to the updraft. Thus, the critical role of V CR in determining R is validated.

58 GEOSCIENCES↗

Dc and microwave characteristics of a high current double interface GaAs/InGaAs/AlGaAs pseudomorphic modulation-doped field-effect transistor

Extremely large current double interface GaAs/In(0.15)Ga(0.85)As/Al(0.15)Ga(0.85)As pseudomorphic modulation-doped field-effect transistors (MODFET's) grown by molecular beam epitaxy were achieved. The 1-micron gate devices studied have peak current levels (430 mA/mm at 300 K and 483mA/mm at 77 K) roughly one and a half to two times that found in single interface pseudomorphic MODFET's. These devices also retain high transconductances over a broad range of gate voltage, peaking at 312 mS/mm at 300 K and 362 mS/mm at 77 K. Excellent microwave performance is also obtained with a maximum frequency of oscillation (f-max) of 37 GHz and a current gain cut-off frequency of as high as 23 GHz at 300 K. An output power level of 14 dBm (1 dB gain compression) was obtained at 6 GHz for a 290-micron gate width. This double interface single quantum well MODFET may be of great importance in millimeter wave power amplifiers.

Henderson, T.↗

Strong-field cyclotron scattering. I - Scattering amplitudes and natural line width

The introduction of resonance line width into the QED cyclotron scattering amplitudes is considered. It is shown that the width arises from loop corrections to the electron propagator, which also bring about shifts in the Landau energy levels. A formalism is developed that allows the dressed electron propagator to be derived. It is shown that the states of Herold et al. (1982) and of Sokolov and Ternov (1968), which diagonalize the component of the magnetic moment operator parallel to the external magnetic field, are appropriate for calculation of the scattering amplitudes, whereas the states of Johnson and Lippmann (1949) are not. In addition, it is shown that the Breit-Wigner broadening approximation E tends to E - i(Gamma)/2 is consistent with the perturbation-theoretic order of the calculation, if the former basis states are chosen, but not the latter.

Graziani, Carlo↗

Influence of recreational activity and muscle strength on ulnar bending stiffness in men

Bone bending stiffness (modulus of elasticity [E] x moment of inertia [I]), a measure of bone strength, is related to its mineral content (BMC) and geometry and may be influenced by exercise. We evaluated the relationship of habitual recreational exercise and muscle strength to ulnar EI, width, and BMC in 51 healthy men, 28-61 yr of age. BMC and width were measured by single photon absorptiometry and EI by mechanical resistance tissue analysis. Maximum biceps strength was determined dynamically (1-RM) and grip strength isometrically. Subjects were classified as sedentary (S) (N = 13), moderately (M) (N = 18), or highly active (H) (N = 20) and exercised 0.2 +/- 0.2; 2.2 +/- 1.3; and 6.8 +/- 2.3 h.wk-1 (P < 0.001). H had greater biceps (P < 0.0005) and grip strength (P < 0.05), ulnar BMC (P < 0.05), and ulnar EI (P = 0.01) than M or S, who were similar. Amount of activity correlated with grip and biceps strength (r = 0.47 and 0.49; P < 0.001), but not with bone measurements, whereas muscle strength correlated with both EI and BMC (r = 0.40-0.52, P < 0.005). EI also correlated significantly with both BMC and ulnar width (P < 0.0001). Ulnar width and biceps strength were the only independent predictors of EI (r2 = 0.67, P < 0.0001). We conclude that levels of physical activity sufficient to increase arm strength influence ulnar bending stiffness.

NASA Discipline Musculoskeletal↗

Assessing Eruption Column Height in Ancient Flood Basalt Eruptions

A buoyant plume model is used to explore the ability of flood basalt eruptions to inject climate-relevant gases into the stratosphere. An example from the 1986 Izu-Oshima basaltic fissure eruption validates the model's ability to reproduce the observed maximum plume heights of 12-16 km above sea level, sustained above fire-fountains. The model predicts maximum plume heights of 13-17 km for source widths of between 4-16 m when 32% (by mass) of the erupted magma is fragmented and involved in the buoyant plume (effective volatile content of 6 wt%). Assuming that the Miocene-age Roza eruption (part of the Columbia River Basalt Group) sustained fire-fountains of similar height to Izu-Oshima (1.6 km above the vent), we show that the Roza eruption could have sustained buoyant ash and gas plumes that extended into the stratosphere at approximately 45 deg N. Assuming 5 km long active fissure segments and 9000 Mt of SO2 released during explosive phases over a 10-15 year duration, the approximately 180 km of known Roza fissure length could have supported approximately 36 explosive events/phases, each with a duration of 3-4 days. Each 5 km fissure segment could have emitted 62 Mt of SO2 per day into the stratosphere while actively fountaining, the equivalent of about three 1991 Mount Pinatubo eruptions per day. Each fissure segment could have had one to several vents, which subsequently produced lava without significant fountaining for a longer period within the decades-long eruption. Sensitivity of plume rise height to ancient atmospheric conditions is explored. Although eruptions in the Deccan Traps (approximately 66 Ma) may have generated buoyant plumes that rose to altitudes in excess of 18 km, they may not have reached the stratosphere because the tropopause was substantially higher in the late Cretaceous. Our results indicate that some flood basalt eruptions, such as Roza, were capable of repeatedly injecting large masses of SO2 into the stratosphere. Thus sustained flood basalt eruptions could have influenced climate on time scales of decades to centuries but the location (i.e., latitude) of the province and relevant paleoclimate is important and must be considered.

climate↗

X-ray and gamma ray detector readout system

A readout electronics scheme is under development for high resolution, compact PET (positron emission tomography) imagers based on LSO (lutetium ortho-oxysilicate, Lu.sub.2SiO.sub.5) scintillator and avalanche photodiode (APD) arrays. The key is to obtain sufficient timing and energy resolution at a low power level, less than about 30 mW per channel, including all required functions. To this end, a simple leading edge level crossing discriminator is used, in combination with a transimpedance preamplifier. The APD used has a gain of order 1,000, and an output noise current of several pA/ Hz, allowing bipolar technology to be used instead of CMOS, for increased speed and power efficiency. A prototype of the preamplifier and discriminator has been constructed, achieving timing resolution of 1.5 ns FWHM, 2.7 ns full width at one tenth maximum, relative to an LSO/PMT detector, and an energy resolution of 13.6% FWHM at 511 keV, while operating at a power level of 22 mW per channel. Work is in progress towards integration of this preamplifier and discriminator with appropriate coincidence logic and amplitude measurement circuits in an ASIC suitable for a high resolution compact PET instrument. The detector system and/or ASIC can also be used for many other applications for medical to industrial imaging.

Tumer, Tumay O↗

Firm spin and parity assignments for high-lying, low-spin levels in stable Si isotopes

A natural silicon target was investigated in a nat Si(γ,γ') photon-scattering experiment with fully linearly-polarised, quasi-monochromatic γ rays in the entrance channel. The mean photon energies used were < E γ >= 9.33, 9.77, 10.17, 10.55, 10.93, and 11.37 MeV, and the relative energy spread (full width at half maximum) of the incident beam was ΔE γ /< E γ >≈ 3.5–4 %. The observed angular distributions for the ground-state decay allow firm spin and parity assignments for several levels of the stable even-even silicon isotopes.

74 ATOMIC AND MOLECULAR PHYSICS↗

Search for a resonance decaying to a W boson and a photon in proton-proton collisions at $\sqrt{s}$ = 13 TeV using leptonic W boson decays

A search for a new charged particle X with mass between 0.3 and 2.0 TeV decaying to a W boson and a photon is presented, using proton-proton collision data at a center-of-mass energy of 13 TeV, collected by the CMS experiment and corresponding to an integrated luminosity of 138 fb$^{-1}$. Particle X has electric charge $\pm$ 1 and is assumed to have spin 0. The search is performed using the electron and muon decays of the W boson. No significant excess above the predicted background is observed. The upper limit at 95% confidence level on the product of the production cross section of the X and its branching fraction to a W boson and a photon is found to be 94 (137) fb for a 0.3 TeV resonance and 0.75 (0.81) fb for a 2.0 TeV resonance, for an X width-to-mass ratio of 0.01% (5%). This search presents the most stringent constraints to date on the existence of such resonances across the probed mass range. A statistical combination with an earlier study based on the hadronic decay mode of the W boson is also performed, and the upper limit at 95% confidence level for a 2.0 TeV resonance is reduced to 0.50 (0.63) fb for an X width-to-mass ratio of 0.01% (5%).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Optically Addressable Light Valve Based on a GaN:Mn Photoconductor

Semi-insulating manganese-doped gallium nitride (GaN:Mn) layers epitaxially grown on unintentionally doped GaN substrates were used as photoconductors in optically addressable light valves (OALVs) to withstand higher operational laser fluences compared to current state-of-the-art OALVs where bismuth silicon oxide (BSO; Bi 12 SiO 20 ) layers are used as photoconductors. GaN:Mn promises to be an exciting material for optoelectronic operations due to its large laser fluence handling capability and photoresponsivity near the band edge. The laser damage thresholds for the semi-insulating epitaxial GaN:Mn layer and the n-type substrate layer were measured to be 2.4 and 4.2 J/cm 2 , respectively. These are 6–10 times higher than that of BSO (0.4 J/cm 2 ). These measurements were performed by exposing ~200 sites on the samples to increasing fluence levels from a Gaussian pulsed Nd:YAG laser system (1064 nm) operating at a 5 Hz repetition rate with a 3 ns pulse width. Photoresponsivity of the GaN:Mn material was investigated at discrete wavelengths of 447, 405, and 380 nm. Further, the peak photoresponsivity was observed under an illumination wavelength of 380 nm and is attributed to stronger absorption. The OALV was fabricated by attaching a 110-μm-thick GaN:Mn layer grown on a 280-μm-thick n-GaN layer to a 3-mm-thick BK7 optical window. A twisted nematic E7 liquid crystal was introduced to the 5 μm gap between the two components. Transmission levels of >90% were achieved for the fabricated OALVs for a peak voltage of 40 V, constrained by transmission “bleed-through”.

36 MATERIALS SCIENCE↗