Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Irrigation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Radiation Crosslinking of Modifying Super Absorbent (Polyacrylamide/Gelatin) Hydrogel as Fertilizers Carrier and Soil Conditioner

A novel approach is developed for preparing a highly porous super absorbent hydrogel (SAH). Synthetic and natural hydrogel based acrylamide (Am) and gelatin (G) were polymerized and crosslinked by gamma radiation. Three hydrogels compositions have been prepared in weight ratio 1:2, 1.5:1.5 and 2:1 (wt:wt) for 30% PAAM/G and exposed to gamma radiation at dose of 30 kGy. The effect of chemical modifications on increasing the swelling power of polyacrylamide gelatin (PAAM/G) has been evaluated. The alkaline hydrolysis of PAAM/G hydrogel with concentrated NaOH converts amid groups CONH{sub 2} to carboxylic groups COONa. The modified hydrogels will take the codes PAAM-COOH/G, PAAM-COONa/G and PAAM-COOK/G that dramatically increased the degree of swelling from 220 to 720 (g/g). Furthermore, studies on the slow release ability of three kinds of fertilizer (K, P and urea) loaded on modified PAAM-COOH/G and evaluated the ability of SAH hydrogels to absorb and then gradually release water and fertilizer. A mathematical model for fertilizer release from PAAM-COOK/G was applied to calculate the diffusion coefficient D. The main aim of this article is performed the effect of soil amendment with PAAM-COOK/G on eliminating water stress was tested for bean plant (Vicia faba) irrigation cycles in drought-prone environments. The growth of bean plant was monitored by measuring the highest and size of leaves and bean seed. The effect of water stress was monitored also, by measuring the intensity of chlorophyll for both SAH and control soil. The results indicated that the chemical modification of (PAAM/G) into (PAAM-COOK/G) could greatly improve water absorbency. The experimental data indicated that the SAH has a positive effect to use as fertilizers carrier and soil conditioner.

36 MATERIALS SCIENCE↗

Water Footprints of Cassava- and Molasses-Based Ethanol Production in Thailand

The Thai government has been promoting renewable energy as well as stimulating the consumption of its products. Replacing transport fuels with bioethanol will require substantial amounts of water and enhance water competition locally. This study shows that the water footprint (WF) of molasses-based ethanol is less than that of cassava-based ethanol. The WF of molasses-based ethanol is estimated to be in the range of 1,510-1,990 L water/L ethanol, while that of cassava-based ethanol is estimated at 2,300-2,820 L water/L ethanol. Approximately 99% of the water in each of these WFs is used to cultivate crops. Ethanol production requires not only substantial amounts of water but also government interventions because it is not cost competitive. In Thailand, the government has exploited several strategies to lower ethanol prices such as oil tax exemptions for consumers, cost compensation for ethanol producers, and crop price assurances for farmers. For the renewable energy policy to succeed in the long run, the government may want to consider promoting molasses-based ethanol production as well as irrigation system improvements and sugarcane yield-enhancing practices, since molasses-based ethanol is more favorable than cassava-based ethanol in terms of its water consumption, chemical fertilizer use, and production costs.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Neutron Imaging Reveals Internal Plant Hydraulic Dynamics

Many terrestrial ecosystem processes are constrained by water availability and transport within the soil. Knowledge of plant water fluxes is thus critical for assessing mechanistic processes linked to biogeochemical cycles, yet resolution of root structure and xylem water transport dynamics has been a particularly daunting task for the ecologist. Through neutron imaging, we demonstrate the ability to non-invasively monitor individual root functionality and water fluxes within Zea mays L. (maize) and Panicum virgatum L. (switchgrass) seedlings growing in a sandy medium. Root structure and growth were readily imaged by neutron radiography and neutron computed tomography. Seedlings were irrigated with water or deuterium oxide and imaged through time as a growth lamp was cycled on to alter leaf demand for water. Sub-millimeter scale resolution reveals timing and magnitudes of root water uptake, redistribution within the roots, and root-shoot hydraulic linkages, relationships not well characterized by other techniques.

Warren, Jeffrey↗

Drought conditioning of rhizosphere microbiome influences maize water use traits

Background and Aims: Beneficial plant–microbe interactions can improve plant performance under drought; however, we know less about how drought-induced shifts in microbial communities affect plant traits. Methods: We cultivated Zea mays in fritted clay with soil microbiomes originating from contrasting environments (agriculture or forest) under two irrigation treatments (well-watered or water limited). Using this design, we investigated whether water conditioning was carried forward through the microbiome to affect a subsequent plant cohort that was subjected to either a well-watered or water limited treatment. Results: Regardless of the microbiome-origin, plants inoculated with a microbiome from a water limited legacy had traits that allowed them to avoid stress but conserve water. They produced longer roots to explore soil, generated greater soil dissolved organic carbon, potentially stimulating the microbiome, and slower soil water content loss during drought. A well-watered legacy resulted in plants that delayed permanent stomatal closure and higher photosynthetic nitrogen use efficiency. In plants with a forest-originated microbiome, a well-watered legacy and water treatment also resulted in higher rates of photosynthesis and stomatal conductance. Conclusion: These results demonstrate that soil microbiomes can be developed to influence plant drought performance, impacting crop resilience, using short-term microbial conditioning.

60 APPLIED LIFE SCIENCES↗

Shallow-Water Habitat in the Lower Columbia River Estuary: A Highly Altered System

Abstract Decreases in shallow-water habitat area (SWHA) in the Lower Columbia River and Estuary (LCRE) have adversely affected salmonid populations. We investigate the causes by hindcasting SWHA from 1928 to 2004, system-wide, based on daily higher high water (HHW) and system hypsometry. Physics-based regression models are used to represent HHW along the system as a function of river inflow, tides, and coastal processes, and hypsometry is used to estimate the associated SWHA. Scenario modeling is employed to attribute SWHA losses to levees, flow regulation, diversion, navigational development, and climate-induced hydrologic change, for subsidence scenarios of up to 2 m, and for 0.5 m fill. For zero subsidence, the system-wide annual-average loss of SWHA is 55 ± 5%, or 51 × 10 5 ha/year; levees have caused the largest decrease ( $${54}_{-14}^{+5}$$ 54 - 14 + 5 %, or ~ 50 × 10 5 ha/year). The loss in SWHA due to operation of the hydropower system is small, but spatially and seasonally variable. During the spring freshet critical to juvenile salmonids, the total SWHA loss was $${63}_{-3}^{+2}$$ 63 - 3 + 2 %, with the hydropower system causing losses of 5–16% (depending on subsidence). Climate change and navigation have caused SWHA losses of $${5}_{-5}^{+16}$$ 5 - 5 + 16 % and $${4}_{-6}^{+14}$$ 4 - 6 + 14 %, respectively, but with high spatial variability; irrigation impacts have been small. Uncertain subsidence causes most of the uncertainty in estimates; the sum of the individual factors exceeds the total loss, because factors interact. Any factor that reduces mean or peak flows (reservoirs, diversion, and climate change) or alters tides and along-channel slope (navigation) becomes more impactful as assumed historical elevations are increased to account for subsidence, while levees matter less.

59 BASIC BIOLOGICAL SCIENCES↗

Uncertainties in estimating global potential yields and their impacts for long-term modeling

Estimating realistic potential yields by crop type and region is challenging; such yields depend on both biophysical characteristics (e.g., soil characteristics, climate, etc.), and the crop management practices available in any site or region (e.g., mechanization, irrigation, crop cultivars). A broad body of literature has assessed potential yields for selected crops and regions, using several strategies. In this study we first analyze future potential yields of major crop types globally by two different estimation methods, one of which is based on historical observed yields (“Empirical”), while the other is based on biophysical conditions (“Simulated”). Potential yields by major crop and region are quite different between the two methods; in particular, Simulated potential yields are typically 200% higher than Empirical potential yields in tropical regions for major crops. Applying both of these potential yields in yield gap closure scenarios in a global agro-economic model, GCAM, the two estimates of future potential yields lead to very different outcomes for the agricultural sector globally. In the Simulated potential yield closure scenario, Africa, Asia, and South America see comparatively favorable outcomes for agricultural sustainability over time: low land use change emissions, low crop prices, and high levels of self-sufficiency. In contrast, the Empirical potential yield scenario is characterized by a heavy reliance on production and exports in temperate regions that currently practice industrial agriculture. At the global level, this scenario has comparatively high crop commodity prices, and more land allocated to crop production (and associated land use change emissions) than either the baseline or Simulated potential yield scenarios. This study highlights the importance of the choice of methods of estimating potential yields for agro-economic modeling.

60 APPLIED LIFE SCIENCES↗

Born from a flood: The Salton Sea and its story of survival

The Salton Sea is a terminal lake located in the deepest point of the topographically closed Salton Trough in southeastern California. It is currently the largest lake in area in the state. It was created by a flooding event along the Colorado River in 1905–1907, similar to the way historical floods over past centuries created ephemeral incarnations of ancient Lake Cahuilla in the same location. Its position at the center of today’s Imperial Valley, a hot and arid locale home to some of the most productive irrigated agricultural lands in the United States, has ensured its ongoing survival through a delicate balance between agricultural runoff, its principal form of input, and vast evaporation losses. Nevertheless, its parallel role as a recreational resource and important wildlife habitat, established over its first century of existence, is threatened by increasing salinity decreasing water quality, and reduced water allocations from the Colorado River that feeds the valley’s agriculture. Furthermore, the Salton Sea faces an increasingly uncertain future that will be influenced by reduced water imports from the Colorado River, demands for additional water sources to support farming and energy industries in the valley, and needs to stabilize the lake salinity, maintain recreational resources, and preserve what have become important ecosystems and wildlife habitats.

54 ENVIRONMENTAL SCIENCES↗

Addressing a systematic bias in carbon dioxide flux measurements with the EC150 and the IRGASON open-path gas analyzers

Across a global network of eddy covariance flux towers, two relatively new open-path infrared gas analyzers (IRGAs), the IRGASON and the EC150, are increasingly used to measure net carbon dioxide (CO 2 ) fluxes (F c_OP ). Differences in net CO 2 fluxes derived from open- and closed-path IRGAs in general remain poorly constrained. In particular, the performance of the IRGASON and the EC150 for measuring F c_OP has not been characterized yet. These IRGAs measure CO 2 absorption, which is scaled with air temperature and pressure before converting it to instantaneous CO 2 density. This sensor-internal conversion is based on a slow-response thermistor air temperature measurement. In this paper, we test if the high-frequency temperature attenuation causes selectively systematic F c_OP errors that scale with kinematic temperature fluxes. First, we examine the relationship between wintertime F c_OP and kinematic temperature fluxes for eight northern ecosystems. Second, we investigate how residuals between F c_OP and CO 2 fluxes from co-located closed-path IRGAs (F C_CP ) are related to kinematic temperature fluxes for three different ecosystem types (i.e., boreal forest, grassland, and irrigated cropland). We find that kinematic temperature fluxes, but not mean ambient air temperatures or CO 2 flux regime, consistently determine the absolute magnitude of F c_OP errors. This selectively systematic bias causes the most pronounced relative F c_OP errors to occur when “true” CO 2 fluxes are low and kinematic temperature fluxes are high (e.g., northern ecosystems during the winter). The smallest relative errors occur during periods with large “true” CO 2 fluxes and low kinematic temperature fluxes. To address this bias, we replace the slow-response air temperature in the absorption-to-CO 2 density conversion with a fast-response air temperature derived from sonic anemometer measurements. The use of the fast-response air temperature improves the agreement between half-hourly F c_OP and F C_CP for all open- versus closed-path IRGA comparisons. Additionally, cumulative F c_OP and F c_CP sums are more comparable as differences drop from 63 %–13 % to 20 %–8 %. Finally, the improved IRGASON and EC150 performance enhances the ability and confidence to synthesize flux measurements across multiple sites including these two relatively new IRGAs.

47 OTHER INSTRUMENTATION↗

Water requirements of short rotation poplar coppice: Experimental and modelling analyses across Europe

Poplars are among the most widely used short rotation woody coppice (SRWC) species but due to their assumed high water use, concerns have been raised with respect to large-scale exploitation and potentially detrimental effects on water resources. Here we present a quantitative analysis of the water requirements of poplar SRWC using experimental data and a soil water balance modelling approach at three different sites across Europe. We used (i) eddy covariance (EC) measurements (2004–2006) at an irrigated SRWC grown on a previous rice paddy in northern Italy, (ii) Bowen ratio and energy balance (BREB) measurements (2008–2015) and EC (2011–2015) at a SRWC in rain-fed uplands in the Czech Republic, and (iii) EC measurements (2010–2013) at a SRWC on a previous agricultural land with a shallow water table in Belgium. Without any calibration against water balance component measurements, simulations by the newly developed soil water balance model R-4ET were compared with evapotranspiration (ET) measurements by EC and BREB with a resulting mean root mean square error (RMSE) of 0.75 mm day -1 . In general, there was better agreement between EC and the model (RMSE = 0.66 mm day -1 ) when EC data were adjusted for lack of energy balance closure. A comparison of the simulated and measured soil water content yielded a mean RMSE of 0.03 m 3 m -3 . The mean annual crop coefficient, i.e. the ratio between actual and reference ET, was 0.82 (ranging from 0.65 to 0.95) while the monthly maxima reached 1.16. These values indicated that ET of poplar SRWC was significantly lower than ET of a well-watered grass cover at the annual time scale, but exceeded ET of the reference cover at shorter time scales during the growing season. We show that the model R-4ET is a simple, yet reliable tool for the assessment of water requirements of existing or planned SRWC. For very simple assessments on an annual basis, using a crop coefficient of 0.86 (adjusted to a sub-humid climate), representing an average value across the three sites in years with no evident drought stress, is supported by this analysis.

54 ENVIRONMENTAL SCIENCES↗

Comparison of gas analyzers for eddy covariance: Effects of analyzer type and spectral corrections on fluxes

The eddy covariance technique (EC) is used at hundreds of field sites worldwide to measure trace gas exchange between the surface and the atmosphere. Data quality and correction methods for EC have been studied empirically and theoretically for many years. The recent development of new gas analyzers has led to an increase in technological options for users. Open-path (no inlet tube) and closed-path (long inlet tube) sensors have been used for a long time, whereas enclosed-path (short inlet tube) sensors are relatively new. In this work, we tested the comparability of fluxes calculated from five different gas analyzers including two open-path (LI-7500 A from LI-COR, IRGASON from Campbell), two enclosed-path (CPEC200 from Campbell, LI-7200 from LI-COR), and one closed-path (2311-f; from Picarro) analyzers, which were all located on a single tower at an irrigated alfalfa field in Davis, CA. To effectively compare sensors with different tube characteristics we used three different spectral correction methods. We found that all sensors, regardless of type, can be used to measure fluxes if appropriate corrections are applied and quality control measures are taken. However, the comparability strongly depended on the gas (CO 2 or H 2 O) and the correction method. Average differences were below 4% for CO 2 fluxes using any spectral correction method, but for H 2 O average differences were between 4% and 13% for the different methods. The magnitude of corrections also varied strongly, especially for water vapor fluxes. This study does not identify the best sensor, but rather weighs the benefits and difficulties of each sensor and sensor type. Our findings show that enclosed and closed-path gas analyzers that measure water vapor with inlet tubes experience large high frequency attenuation and should be corrected with empirical correction methods. This information presented here about different the diverse sensors be considered by investigators when choosing a sensor for a site or when analyzing EC measurements from multiple sites.

54 ENVIRONMENTAL SCIENCES↗

Unraveling the effects of management and climate on carbon fluxes of U.S. croplands using the USDA Long-Term Agroecosystem (LTAR) network

Understanding the carbon fluxes and dynamics from a broad range of agricultural systems has the potential to improve our ability to increase carbon sequestration while maintaining crop yields. Short-term, single-location studies have limited applicability, but long-term data from a network of many locations can provide a broader understanding across gradients of climate and management choices. Here we examine eddy covariance measured carbon dioxide (CO 2 ) fluxes from cropland sites across the United States Department of Agriculture's Long-Term Agroecosystem Research (LTAR) network. The dataset was collected between 2001 and 2020, spanning 13 sites for a total of 182 site-years. Average seasonal patterns of net ecosystem CO 2 exchange (NEE), gross primary productivity (GPP), and ecosystem respiration (R eco ) were determined, and subsequent regression analysis on these “flux climatologies” was used to identify relationships to mean annual temperature (MAT), mean annual precipitation (MAP), cropping systems, and management practices. At rainfed sites, carbon fluxes were better correlated with MAP (r2 ≤ 0.5) than MAT (r2 ≤ 0.22). Net carbon balance was different among cropping systems (p < 0.001), with the greatest net carbon uptake occurring in sugarcane (Saccharum spp. hybrids) and the least in soybean (Glycine max) fields. Crop type had a greater effect on carbon balance than irrigation management at a Nebraska site. Across cropping systems, grain crops often had higher GPP and were more likely to have net uptake when compared to legume crops. This multi-site analysis highlights the potential of the LTAR network to further carbon flux research using eddy covariance measurements.

54 ENVIRONMENTAL SCIENCES↗

A coupled equilibrium boundary layer model with stable water isotopes and its application to local water recycling

The contribution of evapotranspiration (ET) to regional precipitation, known as “local water recycling”, is a key process in the water cycle that can affect water management. However, the amount of planetary boundary layer (PBL) moisture that arises from ET is highly uncertain due to complex atmosphere and land surface conditions. In this study, an idealized two-layer equilibrium boundary layer model was coupled with a stable water isotope module including HDO and H 2 18 O to constrain PBL growing season water transport processes. The model was validated using turbulent heat fluxes and isotope ratios of water vapor (δ m ) and precipitation (δ P ) measured at a cropland site and a nearby tall tower in the Upper Midwest, United States. The results show that the PBL equilibrium features of δ m and δ P are well-constrained by thermal and moisture equilibrium in the PBL. For this study region, the summer values of rain evaporation fraction (f) and local water recycling ratio (LRR) are estimated to be 0.09 and 0.29 ± 0.12, respectively. The summer LRR values for the years 2006–2010 were 0.35, 0.36, 0.17, 0.29, and 0.29, respectively. The small value of LRR in 2008 corresponded to a drought condition with the lowest precipitation and second lowest ET among the five years. The summer magnitude of the amount effect is –2.8‰ (mm day –1 ) –1 and –0.8‰ (mm day –1 ) –1 for HDO and H 2 18 O, respectively. The local water recycling is identified as a significant factor influencing the continental isotope effect. Cropland has likely changed the regional LRR by –7.6 to 19.5% under different pre-agriculture land use scenarios. In conclusion, the feedback processes revealed here indicate that local water recycling is expected to be weakened under drought conditions, but it will be enhanced if irrigation is applied more intensely with more frequent drought events as the climate continues to warm.

54 ENVIRONMENTAL SCIENCES↗

Unlocking the biofuel power of cover crop in Washington State: Enhancing potential through hydrothermal liquefaction

This study evaluates cover crops in Washington State (WA) as a renewable feedstock for hydrothermal liquefaction (HTL), supported by techno-economic (TEA) and life cycle (LCA) analysis. In the Pacific Northwest, fallow land is the common winter practice, generating no income for farmers. Over three years, field trials at two representative sites—Puyallup (cool, wet) and Othello (irrigated, no-till)tested triticale, hairy vetch, crimson clover, winter pea, and fava bean preceding cash crops. Biomass yields, composition, soil impacts, and net revenue were assessed across removal treatments. HTL conversion produced 32–37 wt% biocrude, lower than 48 wt% for sewage sludge, with modeled cradle-to-grave carbon intensities of 26–31 g CO 2 e/MJ and minimum fuel selling prices (MFSP) of $\$$6.75–$\$$7.18 per gallon gasoline equivalent (GGE), comparable to other lignocellulosic feedstocks. No significant changes were observed in soil carbon, nitrogen, or subsequent cash crop yields after cover crop removal. Farmer profitability was possible, particularly for triticale and hairy vetch at $\$$60 per dry ton. To address seasonal variability, blending with wastewater sludge was evaluated. All scenarios delivered >70 % carbon intensity reductions relative to fossil fuels, and with Renewable Identification Number (RIN) credits, MFSPs below $\$$2.5 GGE were achievable. These results demonstrate that cover crops can generate new revenue streams for farmers while serving as a flexible, low-carbon feedstock. Integrating cover crops with waste biomass offers a practical pathway to expand the bioeconomy and support year-round renewable fuel production.

Biofuels↗

An innovative approach for atrazine electrochemical oxidation modelling: Process parameter effect, intermediate formation and kinetic constant assessment

Water reuse for irrigation activities is becoming a crucial worldwide challenge due to the depletion of water sources. Anyway, agricultural drainage can potentially contain dangerous contaminants such as metals, pesticides, and herbicides, including atrazine. To address the need for agriculture wastewater purification, we investigated atrazine removal from simulated wastewater by electro-oxidation using platinum-coated titanium electrodes on a lab-scale experimental apparatus. The effects of electrolyte composition and concentration, i.e. ionic strength and applied current density on atrazine removal, were investigated. The results demonstrated that the electrochemical oxidation of the herbicide occurred through two routes, depending on the presence or absence of oxidizing chlorine species. The generation of intermediates during the treatment was monitored and quantified by evaluating the effect of an inert electrolyte (NaClO 4 ) versus an oxidizable chlorine species (NaCl). In both experimental conditions, five intermediates were identified, including desethyl-atrazine (DEA), hydroxyatrazine (ATZ-OH), desisopropyl-atrazine (DIA) and desethyl-desisopropyl-atrazine (DEDIA). A degradation mechanism and a model for describing hydroxyl radicals and active chlorine species contributions at ATZ oxidation were also proposed. Intermediate evolution profiles suggest that ATZ degradation can be considered as a series–parallel reaction system. Finally, the energy requirement assessment for ATZ removal was carried out. The highest ATZ removal (≅98%) was achieved with NaCl = 0.08 M, J = 60 A/m −2 , and E C = 5.83 kWh m −3 . Results highlight that atrazine removal was improved when an active chlorine species (NaCl) was present in the water solution. Moreover, the addition of chlorine species during electro-oxidation is an energy-saving strategy. Collectively, electro-oxidation technique can be efficiently applied to treat polluted water in order to meet the needs of recycling water quality and reduce resource consumption.

Electro-chemical oxidation↗

A calibration procedure to improve global rice yield simulations with EPIC

Crop models are increasingly used to assess impacts of climate change/variability and management practices on productivity and environmental performance of alternative cropping systems. Calibration is an important procedure to improve reliability of model simulations, especially for large area applications. However, global-scale crop model calibration has rarely been exercised due to limited data availability and expensive computing cost. Here we present a simple approach to calibrate Environmental Policy Integrated Climate (EPIC) model for a global implementation of rice. We identify four parameters (potential heat unit – PHU, planting density – PD, harvest index – HI, and biomass energy ratio – BER) and calibrate them regionally to capture the spatial pattern of reported rice yield in 2000. Model performance is assessed by comparing simulated outputs with independent FAO national data. The comparison demonstrates that the global calibration scheme performs satisfactorily in reproducing the spatial pattern of rice yield, particularly in main rice production areas. Spatial agreement increases substantially when more parameters are selected and calibrated, but with varying efficiencies. Among the parameters, PHU and HI exhibit the highest efficiencies in increasing the spatial agreement. Simulations with different calibration strategies generate a pronounced discrepancy of 5–35% in mean yields across latitude bands, and a small to moderate difference in estimated yield variability and yield changing trend for the period of 1981–2000. Present calibration has little effects in improving simulated yield variability and trends at both regional and global levels, suggesting further works are needed to reproduce temporal variability of reported yields. This study highlights the importance of crop models’ calibration, and presents the possibility of a transparent and consistent up scaling approach for global crop simulations given current availability of global databases of weather, soil, crop calendar, fertilizer and irrigation management information, and reported yield.

Crop model↗

Towards a more holistic sustainability assessment framework for agro-bioenergy systems — A review

The use of life cycle assessment (LCA) as a sustainability assessment tool for agro-bioenergy system usually has an industrial agriculture bias. Furthermore, LCA generally has often been criticized for being a decision maker tool which may not consider decision takers perceptions. They are lacking in spatial and temporal depth, and unable to assess sufficiently some environmental impact categories such as biodiversity, land use etc. and most economic and social impact categories, e.g. food security, water security, energy security. This study explored tools, methodologies and frameworks that can be deployed individually, as well as in combination with each other for bridging these methodological gaps in application to agro-bioenergy systems. Integrating agronomic options, e.g. alternative farm power, tillage, seed sowing options, fertilizer, pesticide, irrigation into the boundaries of LCAs for agro-bioenergy systems will not only provide an alternative agro-ecological perspective to previous LCAs, but will also lead to the derivation of indicators for assessment of some social and economic impact categories. Deploying life cycle thinking approaches such as energy return on energy invested-EROEI, human appropriation of net primary production-HANPP, net greenhouse gas or carbon balance-NCB, water footprint individually and in combination with each other will also lead to further derivation of indicators suitable for assessing relevant environmental, social and economic impact categories. Also, applying spatio-temporal simulation models has a potential for improving the spatial and temporal depths of LCA analysis.

54 ENVIRONMENTAL SCIENCES↗

City-level impacts of building tune-ups: Findings from Seattle's building tune-ups program

Many U.S. cities are implementing policies to reduce greenhouse gas (GHG) emissions of their buildings. These range from building energy benchmarking and disclosure to building performance standards (BPS) that require buildings to meet specific targets of energy use or emissions. The City of Seattle adopted a climate action plan in 2013 that set a goal of zero net GHG emissions in the road transportation, buildings, and waste sectors by 2050, with a number of near and long term actions. Seattle implemented mandatory building tune-ups in 2016, applying to commercial buildings larger than 50,000 sqft. Building tune-ups1 involve assessment and implementation of operational and maintenance (O + M) improvements to achieve energy and water efficiency, such as changes to thermostat set points or adjusting lighting or irrigation schedules. Seattle's tune-ups program covered 27 such improvements in HVAC, lighting, domestic hot water, and envelope systems.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Effects of microcystin-LR and cylindrospermopsin on plant-soil systems: A review of their relevance for agricultural plant quality and public health

Toxic cyanobacterial blooms are recognized as an emerging environmental threat worldwide. Although microcystin-LR is the most frequently documented cyanotoxin, studies on cylindrospermopsin have been increasing due to the invasive nature of cylindrospermopsin-producing cyanobacteria. The number of studies regarding the effects of cyanotoxins on agricultural plants has increased in recent years, and it has been suggested that the presence of microcystin-LR and cylindrospermopsin in irrigation water may cause toxic effects in edible plants. The uptake of these cyanotoxins by agricultural plants has been shown to induce morphological and physiological changes that lead to a potential loss of productivity. There is also evidence that edible terrestrial plants can bioaccumulate cyanotoxins in their tissues in a concentration dependent-manner. Moreover, the number of consecutive cycles of watering and planting in addition to the potential persistence of microcystin-LR and cylindrospermopsin in the environment are likely to result in groundwater contamination. The use of cyanotoxin-contaminated water for agricultural purposes may therefore represent a threat to both food security and food safety. However, the deleterious effects of cyanotoxins on agricultural plants and public health seem to be dependent on the concentrations studied, which in most cases are non-environmentally relevant. Interestingly, at ecologically relevant concentrations, the productivity and nutritional quality of some agricultural plants seem not to be impaired and may even be enhanced. However, studies assessing if the potential tolerance of agricultural plants to these concentrations can result in cyanotoxin and allergen accumulation in the edible tissues are lacking. This review combines the most current information available regarding this topic with a realistic assessment of the impact of cyanobacterial toxins on agricultural plants, groundwater quality and public health. - Highlights: • Deleterious effects of MC-LR/CYN on agricultural plants are concentration-dependent. • Toxic effects of MC-LR and CYN at ecological conditions are scarce. • The bioaccumulation of MC-LR/CYN in vegetables is time- and concentration-dependent. • The persistence of MC-LR/CYN on soil systems can result in groundwater contamination. • A realistic assessment of the impact of MC-LR/CYN on agricultural plants was made.

54 ENVIRONMENTAL SCIENCES↗