Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Image resolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Improvements in High Speed, High Resolution Dynamic Digital Image Correlation for Experimental Evaluation of Composite Drive System Components

Composite materials have the potential to reduce the weight of rotating drive system components. However, these components are more complex to design and evaluate than static structural components in part because of limited ability to acquire deformation and failure initiation data during dynamic tests. Digital image correlation (DIC) methods have been developed to provide precise measurements of deformation and failure initiation for material test coupons and for structures under quasi-static loading. Attempts to use the same methods for rotating components (presented at the AHS International 68th Annual Forum in 2012) are limited by high speed camera resolution, image blur, and heating of the structure by high intensity lighting. Several improvements have been made to the system resulting in higher spatial resolution, decreased image noise, and elimination of heating effects. These improvements include the use of a high intensity synchronous microsecond pulsed LED lighting system, different lenses, and changes in camera configuration. With these improvements, deformation measurements can be made during rotating component tests with resolution comparable to that which can be achieved in static tests.

Kohlman, Lee↗
DOE OSTI2016

WE-AB-BRA-11: Improved Imaging of Permanent Prostate Brachytherapy Seed Implants by Combining an Endorectal X-Ray Sensor with a CT Scanner

Purpose: To test feasibility of the use of a digital endorectal x-ray sensor for improved image resolution of permanent brachytherapy seed implants compared to conventional CT. Methods: Two phantoms simulating the male pelvic region were used to test the capabilities of a digital endorectal x-ray sensor for imaging permanent brachytherapy seed implants. Phantom 1 was constructed from acrylic plastic with cavities milled in the locations of the prostate and the rectum. The prostate cavity was filled a Styrofoam plug implanted with 10 training seeds. Phantom 2 was constructed from tissue-equivalent gelatins and contained a prostate phantom implanted with 18 strands of training seeds. For both phantoms, an intraoral digital dental x-ray sensor was placed in the rectum within 2 cm of the seed implants. Scout scans were taken of the phantoms over a limited arc angle using a CT scanner (80 kV, 120–200 mA). The dental sensor was removed from the phantoms and normal helical CT and scout (0 degree) scans using typical parameters for pelvic CT (120 kV, auto-mA) were collected. A shift-and add tomosynthesis algorithm was developed to localize seed plane location normal to detector face. Results: The endorectal sensor produced images with improved resolution compared to CT scans. Seed clusters and individual seed geometry were more discernable using the endorectal sensor. Seed 3D locations, including seeds that were not located in every projection image, were discernable using the shift and add algorithm. Conclusion: This work shows that digital endorectal x-ray sensors are a feasible method for improving imaging of permanent brachytherapy seed implants. Future work will consist of optimizing the tomosynthesis technique to produce higher resolution, lower dose images of 1) permanent brachytherapy seed implants for post-implant dosimetry and 2) fine anatomic details for imaging and managing prostatic disease compared to CT images. Funding: LSU Faculty Start-up Funding. Disclosure: XDR Radiography has loaned our research group the digital x-ray detector used in this work. CoI: None.

60 APPLIED LIFE SCIENCES↗
NASA NTRSDate not supplied

Least Squares Reverse Time Migration (LSRTM) for Damage Imaging in Composite Laminates

A method for adapting least squares reverse time migration (LSRTM) for ultrasonic guided wave imaging of composite laminates is proposed in this paper. As composites become more widely used in fields such as the aerospace industry, the need for high-resolution imaging in structural health monitoring (SHM) and nondestructive evaluation (NDE) is also growing. For instance, delamination is a common problem in composite laminates, which has led to a certain degree of apprehension in the use of composite materials for load-bearing structures. Although the solver-based imaging techniques using conventional reverse time migration (RTM) methods illuminate damage with a wide range of damage-scattering effects, the resulting images do not fully define the damage regions due to the limited data acquisition aperture, sensor density, frequencies/wavelengths, and incompleteness of adjoint reconstruction. Previously, the LSRTM theory was derived by incorporating a least squares migration (LSM) algorithm into RTM, and benchmarked its high-resolution damage imaging performance for isotropic plates. To improve damage imaging in composite laminates, a process to create an ultrasonic guided wave-based LSRTM method for anisotropic materials is proposed in this paper. The derivation of the forward modeling operator and the adjoint operator is presented. Numerical case studies were conducted to show the improvement of LSRTM over RTM in mapping damage in composite plates. Multiple damage sites or damage with a complex shape were created in the numerical studies based on 1) Born approximation-based modeling or 2) reduction of the plate stiffness-based modeling. LSRTM begins by using a forward modeling process. The forward modeling accuracy for the flexural wave solver used in this study for LSRTM was also compared with the results from a three-dimensional rotated staggered grid (RSG) elastodynamic finite difference solver, previously open-sourced by NASA Langley Research Center. These benchmarking studies have shown that the LSRTM method is more effective in reducing artifacts, improving resolution, and enhancing damage model reconstruction compared to RTM in composite laminates.

Jiaze He↗
DOE OSTI2024

Direct Visualization of Defect‐Controlled Diffusion in van der Waals Gaps

Abstract Diffusion processes govern fundamental phenomena such as phase transformations, doping, and intercalation in van der Waals (vdW) bonded materials. Here, the diffusion dynamics of W atoms by visualizing the motion of individual atoms at three different vdW interfaces: hexagonal boron nitride (BN)/vacuum, BN/BN, and BN/WSe 2 , by recording scanning transmission electron microscopy movies is quantified. Supported by density functional theory (DFT) calculations, it is inferred that in all cases diffusion is governed by intermittent trapping at electron beam‐generated defect sites. This leads to diffusion properties that depend strongly on the number of defects. These results suggest that diffusion and intercalation processes in vdW materials are highly tunable and sensitive to crystal quality. The demonstration of imaging, with high spatial and temporal resolution, of layers and individual atoms inside vdW heterostructures offers possibilities for direct visualization of diffusion and atomic interactions, as well as for experiments exploring atomic structures, their in situ modification, and electrical property measurements of active devices combined with atomic resolution imaging.

Chemistry↗
DOE OSTI2019

Discrimination of Bond Order in Organic Molecules Using Noncontact Atomic Force Microscopy

Noncontact atomic force microscopy (nc-AFM) with a CO-functionalized tip can image submolecular structures through high-resolution images with the possibility of discriminating bond order. Here, we employ real-space pseudopotential calculations to simulate nc-AFM images of molecules containing double (dibenzo(cd,n)naphtho(3,2,1,8-pqra)perylene (DBNP), hexabenzo(bc,ef,hi,kl,no,qr)coronene (HBC)) and triple (1,2-bis[2-(2-ethynylphenyl)ethynyl]-benzene (BEEB), 6-phenylhexa-1,3,5-triynylbenzene (PHTB)) bonds. We find (1) triple bonds can be unambiguously distinguished from other interatomic interactions based on a characteristic image and (2) the degree of double bond character can be directly determined from the image. We propose that large lateral forces acting on the tip may induce specific image distortions in the cases of DBNP and BEEB.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Identification of a quasi-liquid phase at solid–liquid interface

Abstract An understanding of solid–liquid interfaces is of great importance for fundamental research as well as industrial applications. However, it has been very challenging to directly image solid–liquid interfaces with high resolution, thus their structure and properties are often unknown. Here, we report a quasi-liquid phase between metal (In, Sn) nanoparticle surfaces and an aqueous solution observed using liquid cell transmission electron microscopy. Our real-time high-resolution imaging reveals a thin layer of liquid-like materials at the interfaces with the frequent appearance of small In nanoclusters. Such a quasi-liquid phase serves as an intermediate for the mass transport from the metal nanoparticle to the liquid. Density functional theory-molecular dynamics simulations demonstrate that the positive charges of In ions greatly contribute to the stabilization of the quasi-liquid phase on the metal surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Novel 2D velocity estimation method for large transient events in plasmas

Dynamics of fast transient events are challenging to be analyzed with high time resolution. Such events can occur in fusion plasmas such as the filaments during edge-localized modes (ELMs). Here, we present a robust method—the spatial displacement estimation—for estimating the displacements of structures with fast dynamics from high spatial and time resolution imaging diagnostics [e.g., gas-puff imaging (GPI)] with sampling time temporal resolution. First, a background suppression method is shown, which suppresses the slowly time-evolving and spatially non-uniform background in the signal. In the second step, a two-dimensional polynomial trend subtraction method is presented to tackle the remaining polynomial order trend in the signal. After performing these pre-processing steps, the spatial displacement of the propagating structure is estimated from the two-dimensional spatial cross-correlation coefficient function calculated between consecutive frames. The method is tested for its robustness and accuracy by simulated Gaussian events and spatially displaced random noise. An example application of the method is presented on propagating ELM filaments measured by the GPI system on the National Spherical Torus Experiment spherical tokamak.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

OGLE-2018-BLG-0532Lb: Cold Neptune with Possible Jovian Sibling

We report the discovery of the planet OGLE-2018-BLG-0532Lb, with very obvious signatures in the light curve that lead to an estimate of the planet-host mass ratio q=M{sub planet}/M{sub host}≃1×10{sup −4}. Although there are no obvious systematic residuals to this double-lens/single-source (2L1S) fit, we find that χ {sup 2} can be significantly improved by adding either a third lens (3L1S, Δχ {sup 2} = 81) or second source (2L2S, Δχ {sup 2} = 77) to the lens-source geometry. After thorough investigation, we conclude that we cannot decisively distinguish between these two scenarios and therefore focus on the robustly detected planet. However, given the possible presence of a second planet, we investigate to what degree and with what probability such additional planets may affect seemingly single-planet light curves. Our best estimates for the properties of the lens star and the secure planet are a host mass M ∼ 0.25 M {sub ⊙}, system distance D {sub L} ∼ 1 kpc, and planet mass m{sub p,1}=8 M{sub ⊕} with projected separation a{sub 1,⊥}=1.4 au. However, there is a relatively bright I = 18.6 (and also relatively blue) star projected within <50 mas of the lens, and if future high-resolution images show that this is coincident with the lens, then it is possible that it is the lens, in which case, the lens would be both more massive and more distant than the best-estimated values above.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1983

The X-ray morphology of Abell 1367

X-ray observations of the nearby cluster Abell 1367 were made with the Imaging Proportional Counter (IPC) and High Resolution Imager (HRI) aboard the Einstein Observatory. The IPC is used to study the diffuse cluster emission. With the HRI, eight point sources are detected above the diffuse cluster emission, three of which are apparently associated with cluster galaxies. In addition, the HRI observations have resolved 13 extended features with characteristic radii of order arcmin, eight of which are associated with cluster galaxies. These extended sources have luminosities of 1.5-6.5 x 10 to the 41st per (H0)50)-squared ergs per sec in the 0.5-4.5 keV band and constitute about 60% of the total cluster emission. The ways in which these hot galactic coronae can be maintained are discussed.

Bechtold, J.↗
NASA NTRS1983

X-ray ionization and the Orion molecular cloud

Recent observations of the Orion Nebula with the imaging proportional counter and the high resolution imager on the Einstein Observatory satellite have revealed that the presumably young stars in that region are strong X-ray emitters. The densest portion of the molecular cloud, which is also the portion with the greatest diversity of molecular species, is a few square arc minutes in size, while its conventional center (the KL Nebula) lies within an arc minute of the peak of the X-ray emission. The X-rays from the stars impinge on the neighboring molecular cloud's core with such intensity that they significantly affect its ionization equilibrium and chemistry. The present investigation has the objective to provide a quantitative account of these effects. Attention is given to simple estimates of the magnitude of X-ray ionization and its variation throughout the cloud, ionization and reaction rates, and a choice of models.

Krolik, J. H.↗
NASA NTRS1983

Optical and X-ray observations of faint quasars in an optically selected sample

The confirmation of six quasars from spectrographic observations made in 1981 using the Multiple Mirror Telescope, and the characterization of 10 quasars from 1980 Einstein-Observatory X-ray observations (using both imaging proportional counter and high-resolution imager), are reported. The candidates had been selected by Formiggini et al. (1980) in a 1.72-sq-deg region centered on 13h 6 deg, on the basis of ultraviolet excess and a limiting B magnitude of 19.20. A total sample of 10 UV-excess quasars of this magnitude has now been confirmed, for an integral surface density of 5.8 + or - 1.8 per sq deg. Confirmation of three objects from another sample with B less than 18.25 as quasars yielded a surface density of 0./59 + or - 0.13 per sq deg at that magnitude. Data from the complete samples were used to compute the number-flux relation, found to be described by a power law with a 2.25 index for quasars with B between 17.0 and 19.2. From the X-ray observations it was determined that quasars with z less than 2.2 and B less than 19.20 contribute about 15 percent to the cosmic 2-keV background.

Marshall, H. L.↗
NASA NTRS1985

The Einstein soft X-ray survey of the Pleiades

The results of a 0.1-4.5-keV X-ray survey of a 2 x 2-deg area centered on the Pleiades open cluster, performed using the imaging proportional counter and high-resolution imager of the Einstein Observatory on four days in 1980-1981, are presented in extensive tables, graphs, maps, histograms, and finding charts and characterized. A total of 61 sources are detected, and 44 of these are identified with cluster members of spectral types B-M. Findings discussed include Lx/Lbol of 10 the -7th for early-type stars; F-star mean Lx like that of F stars in the Hyades and in the field (denying time evolution of Lx); mean G-star Lx = 3.7 x 10 to the 29th erg/sec; G-star activity decay more gradual than 1/sq rt t, with sharp fall for t greater than 1 Gyr; and no evidence for X-ray-emissivity/rotational-velocity correlation in a homogeneous sample of K dwarfs or a sample of K and M stars with established V sin i data.

Caillault, J.-P.↗
NASA NTRS1987

Measurements of OH(X2pi) in the stratosphere by high resolution UV spectroscopy

This paper reports the first results obtained using high spectral resolution imaging ultraviolet spectroscopy to observe multiple rotational lines of OH A2 Sigma-X2pi (0-0) band. A 9.2 A spectral segment from 3075.8 A to 3085.0 A is imaged at 0.08 A FWHM spectral resolution, allowing the simultaneous acquisition of six of the brightest OH resonance fluorescence emission lines. The high spectral resolution and low scattered light design of the instrument allows these lines to be detected above the Rayleigh scattered sunlight background. The technique permits remote sensing of stratospheric OH from a high altitude instrument. The instrument was flown to an altitude of 40 km on Aug. 25, 1983, and again on June 12, 1986, on scientific balloons from Palestine, TX. The OH profiles inverted from the limb scans made during these flights are reported here. These profiles represent the first measurements of the temporal variation of OH over an extended height range. The results demonstrate that the technique can be used to monitor OH from orbit.

Torr, D. G.↗
NASA NTRS1993

Intercomparison of MAS, AVIRIS, and HIS data from FIRE cirrus 2

The NASA ER-2 flight on 5 Dec. 1991 is unique among the FIRE Cirrus 2 missions in that data were acquired simultaneously by the MODIS Airborne Simulator (MAS), the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS), and the High Resolution Interferometer Sounder (HIS). These data represent a unique source of information about the spatial and spectral properties of cirrus clouds. The MAS is a new instrument which will aid in defining algorithms and building an understanding of the ability of the Moderate Resolution Imaging Spectroradiometer (MODIS) to remotely sense atmospheric conditions for assessing global change. In order to establish confidence in the absolute calibration accuracy of the MAS radiances, an inter-comparison of MAS radiances with AVIRIS and HIS has been undertaken.

Gumley, Liam E.↗
NASA NTRS1992

An x ray archive on your desk: The Einstein CD-ROM's

Data from the Einstein Observatory imaging proportional counter (IPC) and high resolution imager (HRI) were released on several CD-ROM sets. The sets released so far include pointed IPC and HRI observations in both simple image and detailed photon event list format, as well as the IPC slew survey. With the data on these CD-ROMS's the user can perform spatial analysis (e.g., surface brightness distributions), spectral analysis (with the IPC event lists), and timing analysis (with the IPC and HRI event lists). The next CD-ROM set will contain IPC unscreened data, allowing the user to perform custom screening to recover, for instance, data during times of lost aspect data or high particle background rates.

Prestwich, A.↗
NASA NTRS2000

EOSDIS Terra Data Sampler #1: Western US Wildfires 2000

This CD-ROM contains sample data in HDF-EOS format from the instruments on board the Earth Observing System (EOS) Terra satellite: (1) Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER); (2) Clouds and the Earth's Radiant Energy System (CERES); (3) Multi-angle Imaging Spectroradiometer (MISR); and (4) Moderate Resolution Imaging Spectroradiometer (MODIS). Data from the Measurements of Pollution in the Troposphere (MOPITT) instrument were not available for distribution (as of October 17, 2000). The remotely sensed, coincident data for the Western US wildfires were acquired August 30, 2000. This CD-ROM provides information about the Terra mission, instruments, data, and viewing tools. It also provides the Collage tool for viewing data, and links to Web sites containing other digital data processing software. Full granules of the data on this CD-ROM and other EOS Data and Information System (EOSDIS) data products are available from the NASA Distributed Active Archive Centers (DAACs).

Perkins, Dorothy C.↗
NASA NTRS2001

TERRA Spacecraft

The Earth Observing System (EOS), managed by NASA's Goddard Space Flight Center (GSFC), Greenbelt, Maryland, is the centerpiece of the Earth Science Enterprise (formerly called "Mission to Planet Earth"), a long-term coordinated research effort to study the Earth as a global system. Terra was launched on December 18, 1999 aboard an ATLAS-IIAS launch vehicle from Vandenberg Air Force Base, California. Terra is a near-polar orbiting spacecraft that will cross the equator at 10:30 AM local time. Terra will collect data simultaneously from a complement of five instruments: CERES (Clouds and the Earth's Radiant Energy System), MISR (Multi-angle Imaging SpectroRadiometer) and MODIS (Moderate-resolution Imaging Spectroradiometer) are provided by the United States; MOPITT (Measurements Of Pollution In The Troposphere) by Canada; and ASTER (Advanced Spaceborne Thermal Emission and Reflection radiometer) by Japan. Researchers around the world will use data from these instruments to study how the atmosphere, land, ocean, and life interact with each other on a global scale. This interactive CD introduces Terra's overall objectives and its instruments, the new technologies developed for Terra, the launch of Terra, and its flight dynamics.

Source record↗
NASA NTRS1998

Pixel Paradise

PixelVision, Inc., has developed a series of integrated imaging engines capable of high-resolution image capture at dynamic speeds. This technology was used originally at Jet Propulsion Laboratory in a series of imaging engines for a NASA mission to Pluto. By producing this integrated package, Charge-Coupled Device (CCD) technology has been made accessible to a wide range of users.

Source record↗