Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERMETALLIC COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Precursor routes to quaternary intermetallics: Synthesis, crystal structure, and physical properties of clathrate-II Cs{sub 8}Na{sub 16}Al{sub 24}Si{sub 112}

A new quaternary clathrate–II composition, Cs{sub 8}Na{sub 16}Al{sub 24}Si{sub 112}, was synthesized by kinetically controlled thermal decomposition (KCTD) employing both NaSi and NaAlSi as the precursors and CsCl as a reactive flux. The crystal structure and composition of Cs{sub 8}Na{sub 16}Al{sub 24}Si{sub 112} were investigated using both Rietveld refinement and elemental analysis, and the temperature dependent transport properties were investigated. Our results indicate that KCTD with multiple precursors is an effective method for the synthesis of multinary inorganic phases that are not easily accessible by traditional solid-state synthesis or crystal growth techniques. - Graphical abstract: Quaternary Cs{sub 8}Na{sub 16}Al{sub 24}S{sub 112} clathrate–II was synthesized for the first time by kinetically controlled thermal decomposition (KCTD) employing a NaSi+NaAlSi precursor mixture with CsCl as the reactive flux, and the structural and transport properties were investigated. Our approach demonstrates a new synthetic pathway for the synthesis of multinary inorganic compounds. This work reports the exploration of a new clathrate composition as this class of materials continues to be of interest for thermoelectrics and other energy-related applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical Behavior of Mg-Al-Zn-Ga Alloy as Anode Materials in 3.5 wt.% NaCl Solution

The microstructure and electrochemical behaviors of Mg-Al-Zn and Mg-Al-Zn-Ga alloys as anode materials were investigated by morphology observation, composition analysis, phase identification, and electrochemical tests. The experimental results suggest that Ga alloying can refine the grains of the Mg-Al-Zn alloy by promoting second-phase segregation, which comprises Mg{sub 17}Al{sub 12} and GaMg{sub 2}. The comparison of discharge tests indicates that adding Ga to the Mg-Al-Zn alloy can negatively shift the discharge potential, provide a high current density, promote the formation of tiny and thin products, and improve the utilization efficiency. Meanwhile, the addition of Ga can increase the corrosion resistance of Mg-Al-Zn alloy because the Ga alloying promotes the segregation of the intermetallic phases in the Mg matrix. The intermetallic phases disperse in isolate states in the Mg matrix, resulting in their falling off from the substrate once their adjacent Mg is exhausted and subsequently ceasing the micro-galvanic corrosion. The Mg-Al-Zn-Ga alloy with higher corrosion resistance performs better discharge activity than that of Mg-Al-Zn alloy in 3.5 wt.% NaCl solution, implying that the Mg-Al-Zn-Ga alloy is a promising anode material for seawater-activated battery.

36 MATERIALS SCIENCE↗

Characterising the polymorphic phase transformation at a localised point on a Cu6Sn5 grain

Highlights: • A single-targeted Cu{sub 6}Sn{sub 5} grain adjacent to Sn-rich sites and Cu{sub 3}Sn was investigated using HVTEM. • Phase transformation from hexagonal to monoclinic in a single-targeted Cu{sub 6}Sn{sub 5} grains. • A time-temperature transformation (TTT) diagram was constructed using the HVTEM results. - Abstract: Cu{sub 6}Sn{sub 5} is an important intermetallic for electric interconnects and anode material of Li-ion batteries, with a polymorphic transformation from hexagonal eta-Cu{sub 6}Sn{sub 5} at temperatures higher than 186 °C to monoclinic eta′-Cu{sub 6}Sn{sub 5} at lower temperatures. The polymorphic transformation of Cu{sub 6}Sn{sub 5} has the potential to generate internal stresses in soldered joints during both the soldering process and subsequent device operation involving thermal cycling. Here we developed a systematic method to characterise the polymorphic transformations at localised points in a single grain of Cu{sub 6}Sn{sub 5} that is in intimate contact with adjacent Sn rich and Cu{sub 3}Sn phases to establish a time–temperature transformation (TTT) diagram of the eta to eta′-Cu{sub 6}Sn{sub 5} transformation. The method involves in situ temperature-controlled high-voltage transmission electron microscopy (HVTEM) of a single-targeted Cu{sub 6}Sn{sub 5} grain with observation of diffraction patterns during multiple heating and cooling experiments on a 0.5 μm thick sample made by focused ion beam milling (FIB). The results are compared to previously reported powder X-ray diffraction data. It is concluded that there is good agreement between both techniques and the transformations observed in the powder are representative of those in individual grains present in polycrystalline structures. Based on the newly developed TTT, it was established that the high-temperature eta-Cu{sub 6}Sn{sub 5} could be stablised down to room temperature if the cooling rate exceeded 20 °C min{sup −1}.

36 MATERIALS SCIENCE↗

Fully reversible hydrogen absorption and desorption reactions with Sc(Al{sub 1-x}Mg{sub x}), x=0.0, 0.15, 0.20

The hydrogen storage properties of Sc(Al{sub 1-x}Mg{sub x}), x=0.0, 0.15, 0.20, have been studied by X-ray powder diffraction, thermal desorption spectroscopy, pressure-composition-isotherms and scanning electron microscopy techniques. Hydrogen is absorbed from the gas phase at 70 kPa and 400 {sup o}C under the formation of ScH{sub 2} and aluminium with magnesium in solid solution. The reaction is fully reversible in vacuum at 500 {sup o}C and shows the hydrogenation-disproportionation-desorption-recombination (HDDR) behaviour. The activation energy of desorption was determined by the Kissinger method to 185 kJ/mol. The material is stable up to at least six absorption-desorption cycles and there is no change in particle size during cycling. -- Graphical abstract: XRD pattern of Sc(Al{sub 1-x}Mg{sub x}). From the top: x=0, 0.15, 0.20. The hydrogen absorption properties were studied by thermal desorption spectroscopy, pressure-composition-isotherms and scanning electron microscopy techniques. Display Omitted

36 MATERIALS SCIENCE↗

Formation of La-modified L1{sub 2}-Al{sub 3}Ti by mechanical alloying and annealing

DO{sub 22}-Al{sub 3}Ti can be transformed into the related cubic L1{sub 2} structure, with more slip systems, by the addition of ternary elements, such as the rare earth Lanthanum. It is believed that combined processing by mechanical alloying and annealing is conducive to the structural evolution and crystal growth. Appropriate and economical processing parameters were determined as: milling time of 40 h, annealing temperature of 750 deg. C and annealing time of 40-60 min. With increased milling time, fine and uniform particles, which originally possess a flake-like morphology, are produced. The Vickers hardness of the as-milled Al-Ti and Al-Ti-La powders increases rapidly at the initial milling stage, then increases slowly at final stage due to lattice distortion and solid solution strengthening. However, the Vickers hardness of the two materials decreases with increased of annealing time. The Vickers hardness of the Al-Ti powders is higher than that of the Al-Ti-La powders.

36 MATERIALS SCIENCE↗

Ytterbium Divalency And Lattice Disorder in Near-Zero Thermal Expansion YbGaGe

While near-zero thermal expansion (NZTE) in YbGaGe is sensitive to stoichiometry and defect concentration, the NZTE mechanism remains elusive. We present x-ray absorption spectra that show unequivocally that Yb is nearly divalent in YbGaGe and the valence does not change with temperature or with nominally 1% B or 5% C impurities, ruling out a valence-fluctuation mechanism. Moreover, substantial changes occur in the local structure around Yb with B and C inclusion. Together with inelastic neutron scattering measurements, these data indicate a strong tendency for the lattice to disorder, providing a possible explanation for NZTE in YbGaGe.

36 MATERIALS SCIENCE↗

Structural and Magnetic Properties of Co{sub 100−x}Pd{sub x} Thin Films Evaporated on Si (100) Substrate

The structural and magnetic properties of Co{sub 100−x}Pd{sub x} thin films grown under vacuum by physical vapor deposition (PVD) on Si (100) are reported. The thicknesses of the samples were measured with a DEKTAK 150 profilometer; chemical composition was analyzed by energy dispersive X-ray analyses (EDX). Microscopic characterizations of the films were done with X-ray diffraction (XRD) and we conclude that all the samples were polycristalline with an hcp structure. The hysteresis loops are performed by means of vibrating sample magnetometer (VSM) and we point up that all the samples present a planar ferromagnetic anisotropy. The saturation magnetization decreases as the palladium content increases and high values of the squareness up to 0.62 were measured. All these results are analyzed and correlated.

36 MATERIALS SCIENCE↗

Magnetic properties of Fe{sub 2}P-type R{sub 6}CoTe{sub 2} compounds (R=Gd-Er)

The magnetic structure of the Fe{sub 2}P-type R{sub 6}CoTe{sub 2} phases (R=Gd-Er, space group P6-bar 2m) has been investigated through magnetization measurement and neutron powder diffraction. All phases demonstrate high-temperature ferromagnetic and low-temperature transitions: T{sub C}=220 K and T{sub CN}=180 K for Gd{sub 6}CoTe{sub 2}, T{sub C}=174 K and T{sub CN}=52 K for Tb{sub 6}CoTe{sub 2}, T{sub C}=125 K and T{sub CN}=26 K for Dy{sub 6}CoTe{sub 2}, T{sub CN}=60 K and T{sub N}=22 K for Ho{sub 6}CoTe{sub 2} and T{sub CN{approx}}30 K and T{sub N{approx}}14 K for Er{sub 6}CoTe{sub 2}. Between 174 and 52 K Tb{sub 6}CoTe{sub 2} has a collinear magnetic structure with K{sub 0}=[0, 0, 0] and with magnetic moments along the c-axis, whereas below 52 K it adopts a non-collinear ferromagnetic one. Below 60 K the magnetic structure of Ho{sub 6}CoTe{sub 2} is that of a non-collinear ferromagnet. The holmium magnetic components with a K{sub 0}=[0, 0, 0] wave vector are aligned ferromagneticaly along the c-axis, whereas the magnetic component with a K{sub 1}=[1/2, 1/2, 0] wave vector are arranged in the ab plane. The low-temperature magnetic transition at {approx}22 K coincides with the reorientation of the Ho magnetic component with the K{sub 0} vector from the collinear to the non-collinear state. Below 30 K Er{sub 6}CoTe{sub 2} shows an amplitude-modulate magnetic structure with a collinear arrangement of magnetic components with K{sub 0}=[0, 0, 0] and K{sub 1}=[1/2, 1/2, 0]. The low-temperature magnetic transition at {approx}14 K corresponds to the variation in the magnitudes of the M{sub Er}{sup K0} and M{sub Er}{sup K1} magnetic components. In these phases, no local moment was detected on the cobalt site. The magnetic entropy of Gd{sub 6}CoTe{sub 2} increases from {Delta}S{sub mag}=-4.5 J/kg K at 220 K up to {Delta}S{sub mag}=-6.5 J/kg K at 180 K for the field change {Delta}{mu}{sub 0}H=0-5 T. - Graphical abstract: The novel Fe{sub 2}P-type R{sub 6}CoTe{sub 2} phases (R=Gd-Er, space group P6-bar 2m) show ferromagnetic type ordering in the temperature range 14-220 K.All compounds demonstrate high-temperature ferromagnetic and low-temperature antiferromagnetic ordering.The magnetic entropy of Gd{sub 6}CoTe{sub 2} increases from {Delta}S{sub mag}=-4.5 J/kg K at 220 K up to {Delta}S{sub mag}=-6.5 J/kg K at 180 K for the field change {Delta}{mu}{sub 0}H=0-5 T.The R{sub 6}CoTe{sub 2} compounds exhibit the commensurate magnetic structures with wave vectors K{sub 0}=[0, 0, 0] and K{sub 1}=[1/2, 1/2, 1/2].

36 MATERIALS SCIENCE↗

Solving the “Coloring Problem” in InPd 3– x Ag x ( x = 0–0.7) by Phase Diagrams Modeling and Diffraction Experiments

Here, a series of InPd 3–x Ag x (x = 0–1) compositions were synthesized by conventional high-temperature synthesis, and as-synthesized samples were characterized by powder X-ray diffraction experiments. Up to x = 0.7, InPd 3–x Ag x adopts the ternary substitutional variant of the InPd 3 structure (TiAl 3 -type), when x > 0.7, elemental Ag starts to segregate along with the main phase. Accurate structural characterization in InPd 3–x Ag x faces a critical challenge due to the narrow X-ray scattering contrast among constituents In, Pd, and Ag and nearly identical neutron scattering lengths of Pd and Ag. To overcome this “coloring problem”, a combination of calculation of phase diagrams modeling (CALPHAD) and diffraction techniques (X-ray and neutron) was employed. In the compositional range 0 ≤ x ≤ 0.7, InPd 3–x Ag x presents a ternary variant of the TiAl 3 -type structure, where Ag atoms selectively substitute one (the 2b Wyckoff site) of the two Pd sites in InPd 3 . Notably, in contrast to the isologous InPd 3–x Cu x (x = 0–1) system, Ag substitution does not form an ordered VRh 2 Sn-type structure at the limiting composition. The distinct site preference in InPd 3–x Ag x is elucidated by charge population analysis, electronic structure calculations, and orbital-resolved chemical bonding investigations, and the extent of substitution is supported by formation free energy calculations.

36 MATERIALS SCIENCE↗

Magnetic anisotropy and order structure of L1{sub 0}-FePt(001) single-crystal films grown epitaxially on (001) planes of MgO, SrTiO{sub 3}, and MgAl{sub 2}O{sub 4} substrates

L1{sub 0}–FePt(001) single-crystal films were grown epitaxially on SrTiO{sub 3}(001), MgAl{sub 2}O{sub 4}(001), and MgO(001) substrates. Their uniaxial magnetic anisotropy K{sub u} and the order structure were examined for the film thickness t range of 2–14 nm. All series of films show large K{sub u} of 4 × 10{sup 7} erg/cm{sup 3} in the thickness range higher than 10 nm, with order parameter S of 0.8 and saturation magnetization M{sub s} of 1120 emu/cm{sup 3}. K{sub u} decreased gradually as t decreased. The K{sub u} reduction was considerable when t decreased from 4 nm to 2 nm. No marked difference in the thickness dependence of K{sub u} was found in any series of films, although the lattice mismatch between FePt and the substrates was markedly different. K{sub u} reduction showed good agreement with the reduction of S for the films on MgAl{sub 2}O{sub 4} and MgO. The K{sub u} ∼ S{sup 2} plot showed an almost linear relation, which is in good agreement with theoretical predictions. Transmission electron microscopy images for a FePt film on MgO substrate revealed that the lattice mismatch between FePt(001) and MgO(001) was relaxed in the initial 1 or 2 layers of FePt(001) lattices, which is likely to be true also for two other series of films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exchange bias and crystal structure of epitaxial (111) FePt/BiFeO{sub 3} sputtered thin films

Crystallographic structure and magnetic properties of the epitaxial FePt (10 nm)/BiFeO{sub 3} (BFO) (10 nm) bilayer films grown on (111) SrTiO{sub 3} (STO) substrates with different deposition temperatures of FePt layers (T{sub d}) have been investigated using magnetron sputtering. Out-of-plane radial scan along (111) direction and off-normal (002) azimuthal scan, determined by synchrotron radiation x-ray diffractometry, evidence that the FePt layers were well epitaxially grown on the (111) epitaxial BFO layers for the samples with T{sub d} = 300 and 700 °C. On the contrary, for the bilayer films with T{sub d} = 500 °C, the FePt and BFO layers exhibit low epitaxial quality. Large in-plane exchange bias field (H{sub eb}) values of 45–412 Oe are obtained for the L1{sub 0}-FePt/BFO bilayer films measured with applied field of 12 kOe at room temperature. The change of effective interfacial area, observed by scanning electron microscopy, between FePt island-like particles and BFO continuous layers, and epitaxiality of the bilayer were correlated with the evolution of H{sub eb}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Seed influence on the ferromagnetic resonance response of Co/Ni multilayers

The effect of Pd and Ru seed layers on the magnetic properties of [Co/Ni]{sub N} multilayers with varying number of bilayer repeats N is investigated using vector network analyzer ferromagnetic resonance. The effective anisotropy field H{sub Keff} is found to increase with N for Ru seed, but decreases for Pd until N = 15. As N is increased beyond 15, H{sub Keff} decreases for both seeds. In contrast, the damping parameter α decreases with N regardless of the seed, showing a 1/N dependence. Taking spin pumping into account, the intrinsic damping α{sub 0} for both Pd and Ru seeds reduce to α{sub 0} ≈ 0.01. These results demonstrate that there can be a strong influence of the seed/Co interface on anisotropy, especially for sufficiently low N, but not necessarily on α{sub 0}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiation response of Ti 2 AlC MAX phase coated Zircaloy-4 for accident tolerant fuel cladding

A Ti 2 AlC MAX phase material was deposited on Zircaloy-4 substrate using the cold spray process, with the goal of enhancing the accident tolerance of zirconium-alloy fuel cladding in light water reactors. The samples were annealed up to 923 K to study the intermetallic phase formation between the coating and Zircaloy-4 substrate. Three interface compounds, ZrAl 2 , ZrAl, and Zr 3 Al, were identified and the activation energy of the interfacial intermetallic compound growth was determined. The radiation response of the coating material and interfacial intermetallic compounds after 3.5 MeV Zr 2+ ion irradiation was investigated by transmission electron microscopy and nanoindentation. Ion irradiation disrupted the nanolamellar structure of the Ti 2 AlC coating while amorphization was observed some of the intermetallic compounds. Furthermore, nanoindentation revealed overall hardening of the Ti 2 AlC coating and Zr 3 Al phase, with no significant change observed in the ZrAl 2 and ZrAl phases.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

New opportunities in microwave electronics with ferromagnetic nanowires

A series of monolithic tunable microwave band-stop filters and phase shifters have been designed, fabricated, and characterized on arrays of ferromagnetic nanowires (FMNWs) constituted of Ni, Co, CoFeB, and NiFe alloy embedded in anodic alumina templates (AAO). The aim of the present investigation is to significantly boost the operating frequency of devices in very low applied magnetic field. The stop-band response can cover from 8 to 40 GHz with an applied magnetic field up to 5 kOe using these materials. In addition, we observed a substantial increase in frequency tunability (>110%) for Ni and NiFe alloy based filter. Frequency bandwidth/linewidth can be tuned with the proper choice of magnetic material, broad band for Co nanowires to narrow band for CoFeB nanowires. The amorphous nature of CoFeB reduces linewidth considerably and hence increases resonance absorption. It is also observed that the frequency linewidth (Δf) decreases with increasing applied magnetic field. The same filter can be used as a tunable phase shifter. For Ni nanowire based phase shifter, a maximum shift of 75°/cm at 4 kOe was observed.

36 MATERIALS SCIENCE↗

Planar Hall effect in Y{sub 3}Fe{sub 5}O{sub 12}/IrMn films

The planar Hall effect of IrMn on an yttrium iron garnet (YIG = Y{sub 3}Fe{sub 5}O{sub 12}) was measured in the magnetic field rotating in the film plane. The magnetic field angular dependence of planar Hall resistance (PHR) was observed in YIG/IrMn bilayer at different temperatures, while the Gd{sub 3}Ga{sub 5}O{sub 12}/IrMn film shows constant PHR for different magnetic field angles at both 10 K and 300 K. This provides evidence that IrMn has interfacial spins which can be led by ferrimagnetic layer in YIG/IrMn structure. A hysteresis can be observed in PHR-magnetic field angle loop of YIG/IrMn film at 10 K, indicative of the irreversible switching of IrMn interfacial spins at low temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The role of the non-magnetic material in spin pumping and magnetization dynamics in NiFe and CoFeB multilayer systems

We present a study of the effective magnetization M{sub eff} and the effective damping parameter α{sub eff} by means of ferromagnetic resonance spectroscopy on the ferromagnetic (FM) materials Ni{sub 81}Fe{sub 19} (NiFe) and Co{sub 40}Fe{sub 40}B{sub 20} (CoFeB) in FM/Pt, FM/NM, and FM/NM/Pt systems with the non-magnetic (NM) materials Ru, Cr, Al, and MgO. Moreover, for NiFe layer systems, the influence of interface effects is studied by way of thickness dependent measurements of M{sub eff} and α{sub eff}. Additionally, spin pumping in NiFe/NM/Pt is investigated by means of inverse spin Hall effect (ISHE) measurements. We observe a large dependence of M{sub eff} and α{sub eff} of the NiFe films on the adjacent NM layer. While Cr and Al do not induce a large change in the magnetic properties, Ru, Pt, and MgO affect M{sub eff} and α{sub eff} in different degrees. In particular, NiFe/Ru and NiFe/Ru/Pt systems show a large perpendicular surface anisotropy and a significant enhancement of the damping. In contrast, the magnetic properties of CoFeB films do not have a large influence of the NM adjacent material and only CoFeB/Pt systems present an enhancement of α{sub eff}. However, this enhancement is much more pronounced in NiFe/Pt. By the introduction of the NM spacer material, this enhancement is reduced. Furthermore, a difference in symmetry between NiFe/NM/Pt and NiFe/NM systems in the output voltage signal from the ISHE measurements reveals the presence of spin pumping into the Pt layer in all-metallic NiFe/NM/Pt and NiFe/Pt systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Rare earth-nickel-indides Dy{sub 5}Ni{sub 2}In{sub 4} and RE{sub 4}Ni{sub 11}In{sub 20} (RE=Gd, Tb, Dy)

The new rare earth metal (RE)-nickel-indides Dy{sub 5}Ni{sub 2}In{sub 4} and RE{sub 4}Ni{sub 11}In{sub 20} (RE=Gd, Tb, Dy) were synthesized from the elements by arc-melting. Well-shaped single crystals were obtained by special annealing sequences. The four indides were investigated by X-ray diffraction on powders and single crystals: Lu{sub 5}Ni{sub 2}In{sub 4} type, Pbam, Z=2, a=1784.2(8), b=787.7(3), c=359.9(1) pm, wR{sub 2}=0.0458, 891 F{sup 2} values, 36 variables for Dy{sub 5}Ni{sub 2}In{sub 4}, U{sub 4}Ni{sub 11}Ga{sub 20} type, C2/m, a=2254.0(9), b=433.8(3), c=1658.5(8) pm, {beta}=124.59(2){sup o}, wR{sub 2}=0.0794, 2154 F{sup 2} values, 108 variables for Gd{sub 4}Ni{sub 11}In{sub 20}, a=2249.9(8), b=432.2(1), c=1657.9(5) pm, {beta}=124.59(2){sup o}, wR{sub 2}=0.0417, 2147 F{sup 2} values, 108 variables for Tb{sub 4}Ni{sub 11}In{sub 20}, and a=2252.2(5), b=430.6(1), c=1659.7(5) pm, {beta}=124.58(2){sup o}, wR{sub 2}=0.0550, 2003 F{sup 2} values, 109 variables for Dy{sub 4}Ni{sub 10.80}In{sub 20.20}. The 2d site in the dysprosium compound shows mixed Ni/In occupancy. Most nickel atoms in both series of compounds exhibit trigonal prismatic coordination by indium and rare earth atoms. Additionally, in the RE{sub 4}Ni{sub 11}In{sub 20} compounds one observes one-dimensional nickel clusters (259 pm Ni{sub 1}-Ni{sub 6} in Dy{sub 4}Ni{sub 10.80}In{sub 20.20}) that are embedded in an indium matrix. While only one short In{sub 1}-In{sub 2} contact at 324 pm is observed in Dy{sub 5}Ni{sub 2}In{sub 4}, the more indium-rich Dy{sub 4}Ni{sub 10.80}In{sub 20.20} structure exhibits a broader range in In-In interactions (291-364 pm). Together the nickel and indium atoms build up polyanionic networks, a two-dimensional one in Dy{sub 5}Ni{sub 2}In{sub 4} and a complex three-dimensional network in Dy{sub 4}Ni{sub 10.80}In{sub 20.20}. These features have a clear consequence on the dysprosium coordination, i.e. a variety of short Dy-Dy contacts (338-379 pm) in Dy{sub 5}Ni{sub 2}In{sub 4}, while the dysprosium atoms are well separated (430 pm shortest Dy-Dy distance) within the distorted hexagonal channels of the [Ni{sub 10.80}In{sub 20.20}] polyanion of Dy{sub 4}Ni{sub 10.80}In{sub 20.20}. The crystal chemistry of both structure types is comparatively discussed. - Graphical abstract: Crystal structure of Dy{sub 5}Ni{sub 2}In{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure and electronic properties of the new compounds U{sub 3}Co{sub 12-x}X{sub 4} with X=Si, Ge

The new compounds U{sub 3}Co{sub 12-x}X{sub 4} with X=Si, Ge were prepared by direct solidification of the corresponding liquid phase, followed by subsequent annealing at 1173 K. Single crystal X-ray diffraction carried out at room temperature showed that they crystallize with the hexagonal space group P6{sub 3}/mmc (no.194) and the unit-cell parameters a=8.130(5), c=8.537(5) A and a=8.256(1), c=8.608(1) A for the silicide and germanide, respectively. Their crystal structure derives from the EuMg{sub 5.2} structure type, and is closely related to the Sc{sub 3}Ni{sub 11}Si{sub 4} and Gd{sub 3}Ru{sub 4-x}Al{sub 12+x} types. For the present compounds, no substitution mechanisms have been observed, the partial occupancy of one Co site results from the presence of vacancies, only. The homogeneity ranges, evaluated by energy dispersive spectroscopy analysis, extend from x=0.0(2) to 0.3(2) and from x=0.0(2) to 1.0(2) for U{sub 3}Co{sub 12-x}Si{sub 4} and U{sub 3}Co{sub 12-x}Ge{sub 4}, respectively. The electronic properties of both compounds were investigated by means of DC magnetic susceptibility and DC electrical resistivity measurements. The U{sub 3}Co{sub 12-x}X{sub 4} compounds are both Pauli paramagnets with their electrical resistivity best described as poor metallic or dirty metallic behavior. - Graphical abstract: The crystal structure of the new compounds U{sub 3}Co{sub 12-x}X{sub 4}, X=Si, Ge is a ternary ordered variant of the EuMg{sub 5.2}-type with a site preference for the 4e position.

36 MATERIALS SCIENCE↗