Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Investigation of new approaches for InGaN growth with high indium content for CPV application

We propose to use two new approaches that may overcome the issues of phase separation and high dislocation density in InGaN-based PIN solar cells. The first approach consists in the growth of a thick multi-layered InGaN/GaN absorber. The periodical insertion of the thin GaN interlayers should absorb the In excess and relieve compressive strain. The InGaN layers need to be thin enough to remain fully strained and without phase separation. The second approach consists in the growth of InGaN nano-structures for the achievement of high In content thick InGaN layers. It allows the elimination of the preexisting dislocations in the underlying template. It also allows strain relaxation of InGaN layers without any dislocations, leading to higher In incorporation and reduced piezo-electric effect. The two approaches lead to structural, morphological, and luminescence properties that are significantly improved when compared to those of thick InGaN layers. Corresponding full PIN structures have been realized by growing a p-type GaN layer on the top the half PIN structures. External quantum efficiency, electro-luminescence, and photo-current characterizations have been carried out on the different structures and reveal an enhancement of the performances of the InGaN PIN PV cells when the thick InGaN layer is replaced by either InGaN/GaN multi-layered or InGaN nanorod layer.

14 SOLAR ENERGY↗

Environmental stability of high-mobility indium-oxide based transparent electrodes

Large-scale deployment of a wide range of optoelectronic devices, including solar cells, critically depends on the long-term stability of their front electrodes. Here, we investigate the performance of Sn-doped In{sub 2}O{sub 3} (ITO), H-doped In{sub 2}O{sub 3} (IO:H), and Zn-doped In{sub 2}O{sub 3} (IZO) electrodes under damp heat (DH) conditions (85 °C, 85% relative humidity). ITO, IO:H capped with ITO, and IZO show high stability with only 3%, 9%, and 13% sheet resistance (R{sub s}) degradation after 1000 h of DH, respectively. For uncapped IO:H, we find a 75% R{sub s} degradation, due to losses in electron Hall mobility (μ{sub Hall}). We propose that this degradation results from chemisorbed OH- or H{sub 2}O-related species in the film, which is confirmed by thermal desorption spectroscopy and x-ray photoelectron spectroscopy. While μ{sub Hall} strongly degrades during DH, the optical mobility (μ{sub optical}) remains unchanged, indicating that the degradation mainly occurs at grain boundaries.

36 MATERIALS SCIENCE↗

Studies on temperature dependence of current-voltage characteristics of glancing angle deposited indium oxide nanowire on silicon substrate

The 1D perpendicular In{sub 2-x}O{sub 3-y} nanostructure arrays have been synthesized by using glancing angle deposition (GLAD) technique. A low deposition rate of 0.5 A°/S produced highly porous structure. The current - voltage characteristics for the In{sub 2-x}O{sub 3-y}nanocolumnar array based were measured through a gold Schottky contact at different temperatures. The temperature dependent ideality factor was calculated from the observed current – voltage characteristics. The ideality factor was found to vary from 4.19 to 2.75 with a variation in temperature from 313 K to 473 K.

36 MATERIALS SCIENCE↗

Amorphous indium gallium zinc oxide thin film grown by pulse laser deposition technique

Highly electrically conducting and transparent in visible light IGZO thin film were grown on glass substrate at substrate temperature of 400 C by a pulse laser deposition techniques. Structural, surface, electrical, and optical properties of IGZO thin films were investigated at room temperature. Smooth surface morphology and amorphous nature of the film has been confirmed from the AFM and GIXRD analysis. A resistivity down to 7.7×10{sup −3} V cm was reproducibly obtained while maintaining optical transmission exceeding 70% at wavelengths from 340 to 780 nm. The carrier densities of the film was obtain to the value 1.9×10{sup 18} cm{sup 3}, while the Hall mobility of the IGZO thin film was 16 cm{sup 2} V{sup −1}S{sup −1}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Insights on semiconductor-metal transition in indium-doped zinc oxide from x-ray photoelectron spectroscopy, time-of-flight secondary ion mass spectrometry and x-ray diffraction

ZnO thin films doped with various amounts of In impurities were prepared by magnetron sputtering at a substrate temperature of 150°C. The shift in optical bandgap of the In-doped ZnO films is studied as a function of carrier concentration. Nominally doped ZnO films exhibit an increase in the measured optical band gap known as the Burstein-Moss effect. Dominant band gap narrowing is observed with increased doping. XPS and TOFSIMS analyses confirm that In is incorporated in the ZnO material. The In 3d peaks show that no metallic In is present as a result of heavy doping. The XRD phase analysis shows a preferential c-axis growth but a shift of the ZnO (002) peak to lower 2-theta values with increasing FWHM as the carrier concentration increases indicates the decline in the quality of crystallinity. An elongation of the c lattice constant is also observed and is likely to be caused by intersitital In as the amount of In dopants increases. The incorporation of In induces a semiconductor-metal transition between the carrier concentrations of 3.58 – 5.61×10{sup 19} cm{sup −3} and structural changes in the ZnO host material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Size-effects in indium gallium arsenide nanowire field-effect transistors

We fabricate and analyze InGaAs nanowire MOSFETs with channel widths down to 18 nm. Low-temperature measurements reveal quantized conductance due to subband splitting, a characteristic of 1D systems. We relate these features to device performance at room-temperature. In particular, the threshold voltage versus nanowire width is explained by direct observation of quantization of the first sub-band, i.e., band gap widening. An analytical effective mass quantum well model is able to describe the observed band structure. The results reveal a compromise between reliability, i.e., V{sub T} variability, and on-current, through the mean free path, in the choice of the channel material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomic structure, energetics, dynamics, and manipulation of topological solitons in indium chains on Si(111) surfaces

Based on scanning tunneling microscopy and first-principles theoretical studies, we characterize the precise atomic structure of a topological soliton in In chains grown on Si(111) surfaces. Variabletemperature measurements of the soliton population allow us to determine the soliton formation energy to be 60 meV, smaller than one half of the band gap of 200 meV. Once created, these solitons have very low mobility, even though the activation energy is only about 20 meV; the sluggish nature is attributed to the exceptionally low attempt frequency for soliton migration. We further demonstrate local electric field enhanced soliton dynamics, and the feasibility of aggregating solitons into soliton polymers.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Populations of metastable and resonant argon atoms in radio frequency magnetron plasmas used for deposition of indium-zinc-oxide films

This work reports optical absorption spectroscopy measurements of the number density of Ar atoms in resonant ({sup 3}P{sub 1}, {sup 1}P{sub 1}) and metastable ({sup 3}P{sub 2}, {sup 3}P{sub 0}) states in rf magnetron sputtering plasmas used for the deposition of ZnO-based thin films. While the density of Ar {sup 3}P{sub 2} and {sup 3}P{sub 0} was fairly independent of pressure in the range of experimental conditions investigated, the density of Ar {sup 3}P{sub 1} and {sup 1}P{sub 1} first sharply increased with pressure and then reached a plateau at values close to those of the {sup 3}P{sub 2} and {sup 3}P{sub 0} levels at pressures above about 50 mTorr. At such pressures, ultraviolet radiation from resonant states becomes trapped such that these levels behave as metastable states. For a self-bias voltage of -115 V and pressures in the 5-100 mTorr range, similar number densities of Ar resonant and metastable atoms were obtained for Zn, ZnO, and In{sub 2}O{sub 3} targets, suggesting that, over the range of experimental conditions investigated, collisions between these excited species and sputtered Zn, In, and O atoms played only a minor role on the discharge kinetics. The metastable-to-ground state number density ratios were also fitted to the predictions of a global model using the average electron temperature, T{sub e}, as the only adjustable parameter. For all targets examined, the values of T{sub e} deduced from this method were in excellent agreement with those obtained from Langmuir probe measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly transparent Nb-doped indium oxide electrodes for organic solar cells

The authors investigated the characteristics of Nb-doped In{sub 2}O{sub 3} (INbO) films prepared by co-sputtering of Nb{sub 2}O{sub 5} and In{sub 2}O{sub 3} for use in transparent anodes for organic solar cells (OSCs). To optimize the Nb dopant composition in the In{sub 2}O{sub 3} matrix, the effect of the Nb doping power on the resistivity and transparency of the INbO films were examined. The electronic structure and microstructure of the INbO films were also investigated using synchrotron x-ray absorption spectroscopy and x-ray diffraction examinations in detail. At the optimized Nb co-sputtering power of 30 W, the INbO film exhibited a sheet resistance of 15 Ω/sq, and an optical transmittance of 86.04% at 550 nm, which are highly acceptable for the use as transparent electrodes in the fabrication of OSCs. More importantly, the comparable power conversion efficiency (3.34%) of the OSC with an INbO anode with that (3.31%) of an OSC with a commercial ITO anode indicates that INbO films are promising as a transparent electrode for high performance OSCs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of H{sub 2} plasma treatment on the electrical properties of titanium-doped indium oxide films prepared by polymer-assisted deposition

The effects of hydrogen (H{sub 2}) plasma on the optical and electrical properties of titanium-doped InO (TIO) grown on glass substrates using polymer-assisted deposition are reported. Samples were exposed to H{sub 2} plasma formed by inductively coupled plasma (ICP). After plasma treatment at a power of 100 W, the sheet resistance of the TIO films decreased from 11 000 to 285 Ω/sq. Additionally, the Hall mobility and sheet carrier concentration of the films increased as the ICP source power was increased to 100 W, without affecting the optical transmittance of the films, due to the removal of the polymer residues and the formation of oxygen vacancies.

36 MATERIALS SCIENCE↗

Low-Temperature Magnetic Properties of Superconducting Indium Nanocomposites in Opal Matrix

We studied magnetic properties of the In–opal nanocomposite, which is a close-packed system of SiO{sub 2} spheres of the same diameter D with metal-filled cavities (series of opal structures with D = 190, 230, and 290 nm were studied). The dependencies of the samples’ magnetization m on temperature T, as well as on external magnetic field H, were measured at various temperatures below the critical temperature T{sub c} of the superconducting (SC) transition. The critical temperature T{sub c} and the critical magnetic field H{sub c} were measured. Magnetization jumps were observed in m(H) dependences at temperatures below 2.6 K. It was found that the jumps are quasiperiodic as functions of H, and the number of jumps increases both with increase in the sweeping rate dH/dt, as well as with decrease in the characteristic size of the In inclusions in the nanocomposite. A model describing the breakup of the SC state with an increase in the external magnetic field is proposed. According to this model, when the screening current reaches a critical value in the near-surface layer of the nanocomposite, an avalanche-like penetration of the field into the volume of the nanocomposite occurs. After this, the SC state is restored, and the magnetic field “freezes” in the structure of the nanocomposite.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Indium Arsenide-Based Spontaneous Emission Sources (Review: a Decade Later)

The results of investigations of light-emitting diodes based on heterostructures with an InAs active region grown by liquid phase and metalorganic vapor-phase epitaxy over the last decade are reviewed. The near-field pattern, L–I and I–V characteristics, and quantum efficiency of point-contact and flip-chip light-emitting diodes are analyzed in a wide temperature range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Emission Properties of Heavily Doped Epitaxial Indium-Nitride Layers

The results of studies of the spontaneous photoluminescence and stimulated emission spectra of epitaxial n-InN layers with a concentration of free electrons of ~10{sup 19} cm{sup –3} are reported. The layers are grown by molecular-beam epitaxy with the plasma activation of nitrogen on sapphire substrates with AlN and GaN buffer layers. It is found that, as the InN layers are grown under conditions with enrichment with nitrogen at a growth temperature elevated to 470°C close to the beginning of the decomposition of InN, the crystal quality of the layers is improved and the stimulated-emission threshold is lowered. As the conditions of growth change to conditions with enrichment with the metal, two emission bands separated by an energy of 100 meV are observed in the spontaneous-photoluminescence spectra of InN. For such layers, a substantial increase in the stimulated-emission threshold and, in some cases, the lack of a transition to stimulated emission are observed. In the study, an interpretation of the observed emission bands is given and some inferences as to their nature are made.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Critically Evaluated Energy Levels and Spectral Lines of Singly Ionized Indium (In II)

A comprehensive list of the best measured wavelengths in the In II spectrum has been compiled. Uncertainties of the wavelength measurements have been analyzed, and existing inconsistencies have been resolved. An optimized set of fine-structure energy levels that fits all observed wavelengths has been derived. Uncertainties of the energy level values have been reduced by an order of magnitude. An improved value of the ionization limit of In II has been determined by fitting quantum-defect and polarization formulas for several series of levels. Intensities of lines observed by different authors have been analyzed and converted to a uniform scale. A set of recommended values of radiative transition rates has been critically compiled, and uncertainties of these rates have been estimated. The hyperfine structure interval in the 5s 2 S ground state of In III has been determined from the measurements of the 5sng and 5snh series in In II.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗